Transaction Type is 922 does not exist

Hi,
While posting FI document I am getting below error message :
Error: Enter another transaction type (Transaction type 922 does not exist)
Message no. AA816
Diagnosis:
According to your entry or specification, you want to use transaction type 922. However, this transaction type has not been defined.
Procedure:
Check the if transaction type 922 is defined in FI-AA Customizing
Please advise how can I rectify this issue!
Regards
VS Rao

Hi VS Rao
Seems you used TT.922 in T-cd: OAYT but somehow you deleted TT.922 afterwards. You can either delete the setting of TT.922 from T-cd: OAYT or simply redefine the TT.922 accordingly if any necessary.
Best regards
George

Similar Messages

Condition type & tax code & does not exist

Hi,
I have a problem to find out the reason why i can not process documents which came via IDocs from Sales SAP system. The error is "Condition type & tax code & does not exist". Following places i have already checked :
1. FTXP - tax code for which error exists the same in both systems
2. Table A053 - Condition types for specific tax codes and country are created in both systems.
The tax determination is under billing and in Sales system it is ok, document is posted and when comes to our FInance system via Idoc it is in error even we have the same entries in the table A053.
Maybe someone knows what can be also checked ?
Thanks
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

IDoc error - Condition type & tax code & does not exist

Hi,
I have the problem with CANADA tax codes. I have a few documents sent from external SAP to different SAP. In the source system documents were posted. In the target system i have error "Condition type & tax code & does not exist". I have compared the tables A003 and A053 in both systems and the settings are the same for specific Condition type and tax code... So where to find the reason Idocs are in error ? The only thing which is different is validity from (in the source system is earlier than in the target but the docs are created after both validation start)...
I would appreciate advice.
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

Combination of plant SUNP and material type finished product does not exist

HI i am suneel
my issue is combination of plant SUNP and material type finished product does not exist when i posting to material in t.code
MB!C after entering materiel and qty in the selection screen i pressed enter on that time this massage is happening
Thanks
with regards
suneel

Hi lakshmi pathi ,
Sorry for the inconvenience i am new for this sap sd and also this community . Actually yesterday and today i got lot of solutions from this community .really i feel very happy with this and i continuous searching for my issues and i got so many solutions. these are also i searched but i dint got any solutions so i posted here .
sorry for the inconvenience
any way thanking you for giving valuable suggestion.
with regards
suneel

Activity Type: cost element does not exist

Dear All,
I am working on ERP configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
Can anybody guide me on how to go further?
regards,
Supriya

Dear
Please revivew the following steps when you are creating a New Acvity type :
OP51 - Check Settings for formulas
OP54 - Check formulas for Costing
Ensure that usage of the parameters are indicated. Some parameters are appropriate for capacity calculation but not for schedule calculation. If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
KLH2 - Maintain hierarchy of Activity type group.
OP19 - Define standard value key
The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing. This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with. Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing. The pre-requisite for using this transaction is that the parameters must have been pre-created.
KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01 - Create Activity Type tied to the primary cost element. (the Cost element field)
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
The operations Start and Finish date will be extended due to the extra time spent on the work center. The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order. The new activity will have a price attached to it and the moving average price will increase.
Regards
JH

Value does not exist for "..." in connection...

Hello,
I have following issue using Design Studio 1.3.
I was changed my source of dashboard from universe to Bex Query.
When it was done I have received following Script Problem related to CheckBox
Description
Location
Event Script
Component
Application
Type
Value "Sourcable" does not exist for "GP_XSRCB" in connection "cuid:AdpcHfZ9h0VKrXD0XhomzOs"
Line 3
On Click
CHECKBOX_1
[rkams1157] S2P_PROTOTYPE_MDM_001-002 - dev
Design Studio Script Problem
Below please find the Script syntax:
if(CHECKBOX_1.isChecked())
DS_2.setFilter("GP_XSRCB", "Sourcable");
else
DS_2.clearFilter("GP_XSRCB");
I would like to note that this script on CheckBox works fine based on universe as a source.
Please advice.

Dear All,
I am also facing same problem, while doing PGI (Post Goods Issue)
Can any one help in this please.
And the error message was
Characteristic value SEL F1P ADD 82947 does not exist for characteristic PAPH4 (ProdHier01-4)
Message no. KE0C133
Diagnosis
The characteristic "PAPH4" ("ProdHier01-4") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" SEL F1P ADD 82947") is not valid in CO-PA.
System Response
The data is not consistent and therefore cannot be transferred to CO-PA.
Procedure
With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
1. When, I check contents of table MARA-PRDHA, it contains 17 character Alphanumeric input "SEL F1P ADD 82947"
2. When, I check character PAPH4 in KEA5-->Data type was CHAR and length was 17.
3. Characterstick PAPH4 cannot be maintained using KES1.
Thanks & Regards
Sahas

Transaction type does not exist. Check entries

Hello all,
EBP 5.0, CCM 1.0, unicode
When I try to log on different language than English and try to shop system is displaying two messages
Internal number range is missing for transaction type. Inform syst. admin
Transaction type does not exist. Check entries
And I cannot see link for Procurement Catalog.
All my customizing up to now was in English, due to the fact that SAP did not provide translation to Croatian (Latin-2 language).
Also catalog call-up has locale "en" for the calling of catalog from EBP.
Please give hint where I can start with debugging.
Gordan

Hello Yann,
main problem, language files for CCM and EBP are not suppied from SAP yet. MY BC told me that they installed Croatian language in WAS, so system should behave as language is intalled fully and represent text in English when there is no translation.
I cannot test other things because EBP will not go into the catalog due to the missing internal numbering for the transaction type. I checked BUS2121 in transaction types but nothing to be found.
I was thinking that those two problems are related but this is not true. First I have to solve number range that check the catalog. Only common between those two problems is logon language.
I even forced our special characters by entering them as UNICODE code and I can see them via catalog manager in english, but only for catalog items. Characteristics and product category names do not follow UNICODE specification.
Confused
Gordan

Transaction type does not exist

While creating PR & PO for the Assets I am getting Following Error
Transaction type does not exist
Message no. AA_BAS_CUS_READ008
Diagnosis
The transaction type entered does not exist.
System Response
Processing is terminated.
Procedure
Check your entry.
Can any body please help me to make PR & PO.
Amit

Hello Amit,
Please verify also the APC account you have set in the account determination of the relevant asset class (the one to which belongs the asset in the PO).
Then kindly check the field status group assigned to this account in FS00.
Please make sure that the fields for asset main and subnumber are enable in the field status group definition and not suppressed.
In other customers this was the reason for such an error.
This should resolve your problem.
Best Regards,
Vanessa.

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

Intercompany transaction does not exists

Hi,
I am have posted entry in F-02 and also i have asigned a new company code to the transaction and also document got created.
now i need to reverse the document for the reversal reason 1 in T.Code FBU8.
I am getting error message " Intercompany Transaction does not exists".
Please help me with this issue.

dear
check settings in OBYA. is clearing account configured for intercompany postings
and check that in OBA7 for the document type you using allow intercompany postings.
regards
rohit
Edited by: ROHITBALI on Nov 19, 2011 7:28 AM

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

We57 link between logmessage and idoc type does not exist

in we57
i have fm idoc_input_pordcr
basic type pordcr101
message type pordcr
when i try to save
gives message link between log message pordcr and idoc type does not exist.
will not let me save
where do i go to link these up

Hi,
Transaction WE82, assign Idoc type to message type.
Regards
Vijaya

Transaction Sourcing - " Screen does not exist"

Hello all,
I tried to call the "transaction BBPSOCO01" or "Carry Out Sourcing" then i am getting the following message
"The following error text was processed in the system SR2 : Dynpro does not exist
The error occurred on the application server cs-ebp_SR2_08 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Module: PREPARE_WORKLIST_WEB_TRANSPORT of program SAPLBBP_SOCO_UI_ITS "
Right now i am working on SRM 5.0 sp 6.
I have seen similar problem in SRM4.0 sp 5 and the relevent note is 632982.
Is there any note exists for SRM 5.0 sp 6 or any other way to solve this problem.
with regards,
mahesh

Hi Mahesh,
AM expericiencing the same problem. I've followed teh instraction in note 632982 but am not winning. Because the the system attempted to use dynpro 0301 in program "SAPLBBP_SOCO_UI_ITS". Which i've deleted as per note above.
How can i take out this dynpro from the include?
Rgs,
Maggie

Dump error: Dynpro does not exist while in transaction me31K

HI,
I am getting dump while creating the Contract in ME31K.
hort text
   Dynpro does not exist
hat happened?
   Error in the ABAP Application Program
   The current ABAP program "SAPLXM06" had to be terminated because it has
   come across a statement that unfortunately cannot be executed.
rror analysis
   The system attempted to use dynpro 0201 in program "SAPLXM06".
   This dynpro does not exist.
rigger Location of Runtime Error
   Program                                 SAPLXM06
   Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
   Row                                     10
   Module type                             (FUNCTION)
   Module Name                             EXIT_SAPLEINM_013

Hello,
use transaction SMOD to check SAP enhancement MM06E005 in your system. Screen SAPLXM06 0201 is the contract header subscreen. The system report it missing because the enhancement MM06E005 (Customer fields in purchasing document) was activated in your system, but not implemented. So either disable/delete the enhancement or create a subscreen.
regards,
J.N.N.

Transaction Type is 922 does not exist

Similar Messages

Maybe you are looking for