Transfer of Asset from one class to another

Hi Friends,
one asset has been created using wrong asset class.
We haven't passed any dep run entries at all.
I created another asset in correct asset class and tried to use ABUMN.
Under Transfer:
to existing asset - it does not allow me: error : retirement of old asset data not poss. actually i am not trying to retire the asset
Under Transfer:
to New asset - I am trying to use the correct asset class, it does not allow me, error: Enter asset number which is between X and Y (we have external no. range)
Thanks for assistance
Sanjay

Hi,
I am getting following error:
Retirement of old assets data not possible (No existing old assets data)
Message no. AA416
Diagnosis
You have tried to post an retirement based on amount, using a transaction type which refers to old assets data (acquisitions from previous years).
However, the sum of the APC at the start of the fiscal year and the transactions, related to the past, equals 0.
Procedure
Check the transaction type entered and the asset.
Thanks
Sanjay

Similar Messages

Transfer of AUC from one fund to another fund

We are a governmental entity. We have assets under construction. Our Board just approved the official closing of a fund that had AUC. The AUC needs to be transferred to another fund. We attempted posting a journal entry where we credited against the WBS element and debited not referencing the WBS element in the closed fund and debited against the WBS element and credited not referencing the WBS element in the transfer to fund. Then, we went through the settlement process. The CIP moved from one asset sub-number to another asset sub-number. However, the value did not move from the closed fund to the other fund.
Does anyone have any suggestions as to how to accomplish this transfer of AUC from one fund to another?

Karl,
All but one of your assumptions is correct. The original WBS element is not yet closed.
Here is what we have...
WBS1 settled to AUC1
We need to transfer the value of AUC1 in FundA to AUC2 in Fund2 so that we can close FundA.
Can you elaborate on your statement... "create a settlement rule for WBS with the old receiver "AuC"."?
Is it possible to transfer from one AUC to another AUC in different funds using ABUMN?
We did performed a test1 where we credited WBS1 and debited WBS2, and ran through all of our processes (AS11_FMIM, CJ8G, ASKB, AFABN). AFABN should have did the following...
DR Investment in Fixed Assets for FundA
CR Investment in Fixed Assets for FundB
and
DR AUC settlement GL account for FundB
CR AUC settlement GL account for FundA
But only entries for FundB were created. We were able to successfully run all processes and post all entries correct for two other WBS elements that we selected in another test. We thought that there was a probem with the master data setup of WBS1 because when we display it and look on the "Assignments" tab, Object Class is set to "Overhead" instead of "Investment". Would this be causing our problem? Thanks for your help.

Transfering text from one class to another

Hi, I'm having a lot of trouble with getting the text from a textArea in a frame to transfer from one class to another.
I could really use any help given.
Thanks
Here's where the text should come from
import javax.swing.*;
import BreezySwing.*;
import java.util.*;
public class UserFrame extends GBFrame {
//String Design = null;
private
   JTextArea InputArea = addTextArea
   ("...",1,1,1,1);
   JButton drawButton = addButton
   ("Draw" ,3,1,1,1);
// UserPanel dPanel = new UserPanel();
   GraphicsInputPanel dPanel = new GraphicsInputPanel();
   GBPanel panel = addPanel(dPanel, 1, 2, 1, 1);
   public void buttonClicked (JButton buttonObj){
      GraphicsInputPanel.setdesign(InputArea.getText());
// rbPanel setDesign(graphicCodeArea.getText());
public static void main(String[] args) {
UserFrame tpo = new UserFrame();
tpo.setSize(400, 300);
tpo.setVisible(true);
and here's where it should be going
import BreezySwing.*;
import java.awt.*;
import java.util.*;
public class GraphicsInputPanel extends GBPanel{
   String design;
   public void setdesign (String d){
      design = d;
   public void paintComponent (Graphics g){
      super.paintComponent(g);
      StringTokenizer lines = new StringTokenizer(design, "\n");
      while (lines.hasMoreTokens()){
         String line = lines.nextToken();
         if (design.equals ("Blue")){
            g.setColor(Color.blue);
         }else if (design.equals("Green")){
            g.setColor(Color.green);
         g.fillRect(0,0,100,100);
     public void setDesign(String d){
      design = d;
      repaint();
}

Hello Saqib,
The requirement to transfer asset with value date in the past year contradict the objective of audit trail established in the system although it is technically possible to do. Perhaps you should convince your client to adopt the standard approach, i.e. value date as at the date of asset transfer.
Kind regards,
John Chin

How to transter contents of itab from one class to another...

Hello experts,
I am currently having problems on how to transfer the contents of an itab or even
the value of a variable from one class to another. For example, I have 10 records
in it_spfli in class 1 and when I loop at it_spfli in the method of class 2 it has no records!
This is an example:
class lcl_one definition.
public section.
data: gt_spfli type table of spfli.
methods get_data.
endclass.
class lcl_one implementation.
method get_data.
select * from spfli
into table gt_spfli.
endmethod.
endclass.
class lcl_two definition inheriting from lcl_one.
public section.
methods loop_at_itab.
endclass.
class lcl_two implementation.
method loop_at_itab.
field-symbols: <fs_spfli> like line of gt_spfli.
loop at gt_spfli assigning <fs_spfli>.
   write: / <fs_spfli>-carrid.
endloop.
endmethod.
endclass.
start-of-selection.
data: one type ref to lcl_one,
      two type ref to lcl_two.
create object: one, two.
call method one->get_data.
call method two->loop_at_itab.
In the example above, the contents of gt_spfli in class lcl_two is empty
even though it has records in class lcl_one. Help would be appreciated.
Thanks a lot guys and take care!

Hi Uwe,
It is still the same. Here is my code:
REPORT zfi_ors_sms
       NO STANDARD PAGE HEADING
       LINE-SIZE 255
       LINE-COUNT 65
       MESSAGE-ID zz.
Include program/s                            *
INCLUDE zun_standard_routine.           " Standard Routines
INCLUDE zun_header.                     " Interface Header Record
INCLUDE zun_footer.                     " Interface Footer Record
INCLUDE zun_interface_control.          " Interface Control
INCLUDE zun_external_routine.           " External Routines
INCLUDE zun_globe_header.               " Report header
INCLUDE zun_bdc_routine.                " BDC Routine
Data dictionary table/s                      *
TABLES: bkpf,
        rf05a,
        sxpgcolist.
Selection screen                             *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file TYPE sxpgcolist-parameters.
SELECTION-SCREEN END OF BLOCK b1.
*/ CLASS DEFINITIONS
      CLASS lcl_main DEFINITION
CLASS lcl_main DEFINITION ABSTRACT.
PUBLIC SECTION.
Structure/s                                  *
    TYPES: BEGIN OF t_itab,
            rec_content(100) TYPE c,
           END OF t_itab.
    TYPES: BEGIN OF t_upfile,
            record_id(2)    TYPE c,            " Record ID
            rec_date(10)    TYPE c,            " Record Date MM/DD/YYYY
            prod_line(10)   TYPE c,            " Product Line
            acc_code(40)    TYPE c,            " Acc Code
            description(50) TYPE c,            " Description
            hits(13)        TYPE c,            " Hits
            amount(15)      TYPE c,            " Amount
           END OF t_upfile.
Internal table/s                             *
    DATA: gt_bdcdata    TYPE STANDARD TABLE OF bdcdata,
          gt_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll,
          gt_itab       TYPE STANDARD TABLE OF t_itab,
          gt_header     LIKE TABLE OF interface_header,
          gt_footer     LIKE TABLE OF interface_footer,
          gt_upfile     TYPE STANDARD TABLE OF t_upfile.
Global variable/s                            *
    DATA: gv_target             TYPE rfcdisplay-rfchost,
          gv_err_flag(1)        TYPE n VALUE 0,
          gv_input_dir(100)     TYPE c
                                 VALUE '/gt/interface/FI/ORS/inbound/',
          gv_inputfile_dir(255) TYPE c,
          gv_eof_flag           TYPE c VALUE 'N',
          gv_string             TYPE string,
          gv_delimiter          TYPE x VALUE '09',
          gv_input_records(3)   TYPE n,
          gv_input_file_ctr(6) TYPE n,
          gv_proc_tot_amt(14)   TYPE p DECIMALS 2,
          gv_prg_message        TYPE string,
          gv_gjahr              TYPE bkpf-gjahr,
          gv_monat              TYPE bsis-monat.
Work area/s                                  *
    DATA: wa_itab               LIKE LINE OF gt_itab,
          wa_upfile             LIKE LINE OF gt_upfile,
          wa_footer             LIKE LINE OF gt_footer,
          wa_header             LIKE LINE OF gt_header.
ENDCLASS.
      CLASS lcl_read_app_server_file DEFINITION
CLASS lcl_read_app_server_file DEFINITION INHERITING FROM lcl_main.
PUBLIC SECTION.
    METHODS: read_app_server_file,
             read_input_file,
             split_header,
             process_upload_file,
             split_string,
             conv_num CHANGING value(amount) TYPE t_upfile-amount,
             split_footer,
             update_batch_control,
             process_data.
ENDCLASS.
      CLASS lcl_process_data DEFINITION
CLASS lcl_process_data DEFINITION INHERITING FROM
                                             lcl_read_app_server_file.
PUBLIC SECTION.
    METHODS process_data REDEFINITION.
ENDCLASS.
*/ CLASS IMPLEMENTATIONS
      CLASS lcl_read_app_server_file IMPLEMENTATION
CLASS lcl_read_app_server_file IMPLEMENTATION.
*/ METHOD read_app_server_file - MAIN METHOD
METHOD read_app_server_file.
    gv_target = sy-host.
    PERFORM file_copy USING 'ZPPDCP' p_file 'HP-UX'
            gv_target CHANGING gv_err_flag.
    CONCATENATE gv_input_dir p_file INTO gv_inputfile_dir.
open application server file
    PERFORM open_file USING gv_inputfile_dir 'INPUT'
                               CHANGING gv_err_flag.
    WHILE gv_eof_flag = 'N'.
      READ DATASET gv_inputfile_dir INTO wa_itab.
      APPEND wa_itab TO gt_itab.
      IF sy-subrc <> 0.
        gv_eof_flag = 'Y'.
        EXIT.
      ENDIF.
      CALL METHOD me->read_input_file.
    ENDWHILE.
close application file server
    PERFORM close_file USING gv_inputfile_dir.
    IF wa_footer-total_no_rec <> gv_input_file_ctr.
      MOVE 'Header Control on Number of Records is Invalid' TO
           gv_prg_message.
      PERFORM call_ws_message USING 'E' gv_prg_message 'Error'.
      gv_err_flag = 1.
    ELSEIF wa_footer-total_no_rec EQ 0 AND gv_input_file_ctr EQ 0.
      MOVE 'Input File is Empty. Batch Control will be Updated' TO
           gv_prg_message.
      PERFORM call_ws_message USING 'I' gv_prg_message 'Information'.
      CALL METHOD me->update_batch_control.
      gv_err_flag = 1.
    ENDIF.
    IF gv_err_flag <> 1.
      IF wa_footer-total_amount <> gv_proc_tot_amt.
        MOVE 'Header Control on Amount is Invalid' TO gv_prg_message.
        PERFORM call_ws_message USING 'E' gv_prg_message 'Error'.
        gv_err_flag = 1.
      ENDIF.
    ENDIF.
ENDMETHOD.
*/ METHOD read_input_file
METHOD read_input_file.
    CASE wa_itab-rec_content+0(2).
      WHEN '00'.
        CALL METHOD me->split_header.
      WHEN '01'.
        CALL METHOD me->process_upload_file.
        ADD 1 TO gv_input_file_ctr.
        ADD wa_upfile-amount TO gv_proc_tot_amt.
      WHEN '99'.
        CALL METHOD me->split_footer.
      WHEN OTHERS.
        gv_err_flag = 1.
    ENDCASE.
ENDMETHOD.
*/ METHOD split_header
METHOD split_header.
    CLEAR: wa_header,
           gv_string.
    MOVE wa_itab TO gv_string.
    SPLIT gv_string AT gv_delimiter INTO
          wa_header-record_id
          wa_header-from_system
          wa_header-to_system
          wa_header-event
          wa_header-batch_no
          wa_header-date
          wa_header-time.
    APPEND wa_header TO gt_header.
ENDMETHOD.
*/ METHOD process_upload_file
METHOD process_upload_file.
    CLEAR gv_string.
    ADD 1 TO gv_input_records.
    MOVE wa_itab-rec_content TO gv_string.
    CALL METHOD me->split_string.
    CALL METHOD me->conv_num CHANGING amount = wa_upfile-amount.
    APPEND wa_upfile TO gt_upfile.
ENDMETHOD.
*/ METHOD split_string
METHOD split_string.
    CLEAR wa_upfile.
    SPLIT gv_string AT gv_delimiter INTO
          wa_upfile-record_id
          wa_upfile-rec_date
          wa_upfile-prod_line
          wa_upfile-acc_code
          wa_upfile-description
          wa_upfile-hits
          wa_upfile-amount.
ENDMETHOD.
*/ METHOD conv_num
METHOD conv_num.
    DO.
      REPLACE gv_delimiter WITH ' ' INTO amount.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
    ENDDO.
ENDMETHOD.
*/ METHOD split_footer
METHOD split_footer.
    CLEAR: wa_footer,
           gv_string.
    MOVE wa_itab TO gv_string.
    SPLIT gv_string AT gv_delimiter INTO
          wa_footer-record_id
          wa_footer-total_no_rec
          wa_footer-total_amount.
    CALL METHOD me->conv_num CHANGING amount = wa_footer-total_amount.
    APPEND wa_footer TO gt_footer.
ENDMETHOD.
*/ METHOD update_batch_control
METHOD update_batch_control.
    DATA: lv_sys_date      TYPE sy-datum,
          lv_sys_time      TYPE sy-uzeit,
          lv_temp_date(10) TYPE c.
    CONCATENATE wa_header-date4(4) wa_header-date2(2)
                wa_header-date+0(2)
           INTO lv_temp_date.
    MOVE lv_temp_date TO wa_header-date.
    APPEND wa_header-date TO gt_header.
Update ZTF0001 Table
    PERFORM check_interface_header USING wa_header 'U' 'GLOB'
                                   CHANGING gv_err_flag.
Archive files
    PERFORM archive_files USING 'ZPPDARC' gv_inputfile_dir 'HP-UX'
            gv_target CHANGING gv_err_flag.
ENDMETHOD.
METHOD process_data.
    SORT gt_upfile ASCENDING.
    CLEAR wa_upfile.
    READ TABLE gt_upfile INDEX 1 INTO wa_upfile.
    IF sy-subrc = 0.
      MOVE: wa_upfile-rec_date+6(4) TO gv_gjahr,
            wa_upfile-rec_date+0(2) TO gv_monat.
    ENDIF.
ENDMETHOD.
ENDCLASS.
      CLASS lcl_process_data IMPLEMENTATION
CLASS lcl_process_data IMPLEMENTATION.
METHOD process_data.
    CALL METHOD super->process_data.
    IF NOT gt_upfile[] IS INITIAL.
    ENDIF.
ENDMETHOD.
ENDCLASS.
Start of selection                           *
START-OF-SELECTION.
DATA: read TYPE REF TO lcl_read_app_server_file,
        process TYPE REF TO lcl_process_data.
CREATE OBJECT: read, process.
CALL METHOD read->read_app_server_file.
CALL METHOD process->process_data.

Transfer executable report from one server to another

hi all,
How to transfer executable report from one server to another?
please reply fast
its urgent
thnx in advance

Kush,
To transfer a object from one server to another server it should be assigned to a package ie Dev Class so that a transport request can be created.Once the request is created we will release it using SE09 and then ask the basis consultant to move the request from Dev to Quality and then Dev to Production.
$TMP objects are called as local objects and can't be transported.
K.Kiran.

How can i transfer my music from one account to another on a different computer?

So i have an itunes account on dell laptop and i share that account with other famliy members. I recently bought a mac pro and wanted to create a new account that way i can use icloud, is there any possible way to transfer everything from my old library to my new one or will i lose everything i had on my phone and ipods? Or is it possible to have one account but multiple icloud accounts?

lisafromwindermere wrote:
I want to start my own account separate from my parents. Can I transfer my music from one account to another? If so, how?
Lisa,
Just get copies of the song files and add them to your iTunes library. With the exception of any DRM-protected files (purchased before mid-2009 and never upgraded) they will play fine, even though they are technically associated with the original account.

Can i transfer my backup from one laptop to another?

I have my backup of apps and music stored in one laptop's iTunes account, how can I transfer my backup from one laptop to another?

iTunes downloads are not stored in a backup (that contains documents, files, camera roll photos, app content/settings etc), neither are the contents of the device's Music and Videos apps - instead a restore would look to pick up your music, films, apps etc from your iTunes library.
Your backups are stored under :
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
To quickly access the AppData folder, click Start. In the search bar, type %appdata%, then press Return.
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
To quickly access the Application Data folder, click Start, then choose Run. In the search bar, type %appdata%, then click OK.
You will need to copy the entire backup directory and copy it into the relevant directory on your other laptop - it should then automatically be picked up by that computer's iTunes and show on the Devices tab in Edit > Preference (iTunes > Preferences on a Mac) on it.
To copy your iTunes library between computers : How to move your iTunes library to a new computer.
You can also use home sharing to copy content between computers : iTunes: Setting up Home Sharing on your computer.

How can I transfer apps purchased from one AppleId to another due to breach of account?

Due to a recent security breach not if my doing a user stole my apple id and needed to change appleid account. Now as a result i've lost all purchased apps from the itune store. I would like to transfer apps from one apple id to another without incurring additional costs. With sufficient information in direct contact with the store I should be able to transferable within the software or at very least with the itune store direct. Perhaps this is a way of charging additional costs for same programs?
Not a happy camper because of the theft in id but now to add insult to injury i'll have to repurchase the apps to properly sync with my devices.
Any help would be appreciated

You can't transfer iTunes content from one account to another. If someone had obtained access to your account credentials and you've had the account locked that should not affect the current authorizations on your computer, though it will prevent you from updating apps until you have resolved the issue. Rather than creating a new AppleID what you should do is regain control of your original Apple ID and have it reenabled with a new password, get, if possible, Apple to deauthorize all computers for your account (assuming you don't have 5 so can't do it yourself) then authorize your computers.
tt2

How do I transfer my music from one PC to another?

How do I transfer iTunes music from one PC to another?

http://support.apple.com/kb/HT4527
The said article above will explain how to move your itunes library to another computer. The easiest way is to utilize an external hard drive.

How do I transfer my music from one PC to another PC with ipod?

I currently have my music in one PC and just bought another PC for the home. How do I transfer my music from one PC to another without reloading all the music?

man, oh man the money i would make if i was making commision.
try this program:
iPod agent
find it at download.com
free to try/$15USD to buy

How do i transfer my money from one account to another?

How do i transfer my money from one account to another?

Welcome to the Apple Community.
That isn't possible.

HT204053 How can I transfer my apps from one account to another

How can I transfer my apps from one account to another

Apple will not permit transfer of applications from one account to another. Suppose your mom has presented an iPad to you and before presenting she has downloaded some Apps with her account. If you want to update those Apps, you must know her pass word or send the iPad to her and request her to update and give back. If you feel it is time consuming and difficult, the best way is purchase new iPad and down load the latest version of App. Whenever you come across you go on purchasing new iPad. This will help you to have latest version of iPad with you.
Ramanujam, Hyderabad.

How do I transfer my music from one account to another

I'm trying to figure out how t transfer my music from one account to another since someone hacked into my girlfriends account and now iTunes locked her account as a one account use only and majority of my music was bought with my card. Is there any way to transfer all my purchased music into my new account? I still have the music I purchased on my pc.

You can't, all content is tied to the account that purchased / downloaded it and it can't be copied or transferred to a different account.

I want to start my own account separate from my parents. Can I transfer my music from one account to another? If so, how?

I want to start my own account separate from my parents. Can I transfer my music from one account to another? If so, how?

lisafromwindermere wrote:
I want to start my own account separate from my parents. Can I transfer my music from one account to another? If so, how?
Lisa,
Just get copies of the song files and add them to your iTunes library. With the exception of any DRM-protected files (purchased before mid-2009 and never upgraded) they will play fine, even though they are technically associated with the original account.

How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer.

How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer. If I have a user name then where do I sign into Firefox, it should be that easy but I can't seem to figure it out.

Hey susanneyes,
Sounds like you want to set up Firefox Sync. This will allow you to keep all of your instances of Firefox synchronized. Just follow the steps in [https://support.mozilla.com/en-US/kb/what-firefox-sync?s=sync&r=0&as=s this article] and you'll be set.
Hopefully this helps!

Transfer of Asset from one class to another

Similar Messages

Maybe you are looking for