Transfer to presentation server
Hi Guru,
I am downloading the data to presentation server. But it should download to another peson m/c.How to do that .
Pls help me.
For ex. There are two persons A and B.
When A is executing the data then it sud download in the m/c of B.
Thanks
Hi,
You can download the file directly into another system it is working I have done it is possible. 1st you have to map the system in your network places then you can give the path directly it will dowloads.
Steps:
1. 1st you have to map the system in your network places there you will get a option add network place click on that it will gives popup screen there you can press next button.
2. In next step it will asks choose another network location select that and click on next button
3. In next screen you will get browse button from there you can browse and select the path and click on that next button
4. Finally it will asks you finish button click on finish button it will creates a network place on your system
5. This path you can give directly where you want it will downloads there directly
Note: If it is same network it will works normally as I said. and If It is in other network you have to use VPN connection then it will works.
See below Example I tried it was worked.
DATA: IT_MARA TYPE STANDARD TABLE OF MARA WITH HEADER LINE.
SELECT * FROM MARA INTO TABLE IT_MARA.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = '
abcsrvr\abc\TEST.XLS'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
SHOW_TRANSFER_STATUS = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = IT_MARA
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Ganesh
Similar Messages
-
How to transfer file from application server to presentation server in background?
Hi Experts,
How to transfer file from application server to presentation server in background?
Thanks in advance
NamitaThanks Raman and Challa,
We want to move file from application server to Shared folder, not on local machine. We checked FM which you guys have provided but those are not able to read file from application server.
We need this program to run in background so that we can use this in daily process chain.
Appreciate your inputs on this.
Thanks,
Namita -
How to bring the data from application server to presentation server
hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
MFL1(9) TYPE C,
MFL2(5) TYPE C,
MFL3(9) TYPE C,
MFL4(2) TYPE C,
MFL5(8) TYPE C ,
end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
setid(8) type c,
end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = MFILENAME
FILETYPE = 'ASC'
TABLES
data_tab = matab1
EXCEPTIONS
file_write_error = 1
invalid_type = 2
no_authority = 3
unknown_error = 4
OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
MFL5 = '0'.
CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
"evaluate
*& Form GET_SOURCE
text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCEHi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant -
Upload a set of files from presentation server to app server.
Hello,
I need an urgent help.
I know how to use GUI_UPLOAD fm for simple file uploading.
However, my requirement is that in my report program(on selection screen) I give the source directory(presentation server) and the target directory
(application server). The report has to get all the files from the presentation server (from this source directory) and has to upload each file to the application server in the target directory.
Could anyone please help me in this?
It would be very helpful if anyone can put the code / standard example if there is any mechanism in ABAP to get the set of files from the presentation server, given the directory name.
THanks a lot for your help,
Best Regards,
Pramod S.HI Pramod,
After you get the data into the internal table, you need to pass the internal table, record by record into the application server.
data: wa_file type string.
data: tab_file like table of wa_file,
pcount type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_LIST_FILES
exporting
DIRECTORY = 'C:\test'
FILTER = '.'
FILES_ONLY = 'X'
DIRECTORIES_ONLY
changing
FILE_TABLE = tab_file
count = pcount.
loop at tab_file into wa_file.
clear it_data.
refresh it_data.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
exporting
FILENAME = wa_file
changing
data_tab = it_data.
open dataset <filename> for output in text mode encoding default.
if sy-subrc = 0.
loop at it_data.
transfer it_data to <filename>.
endloop.
close dataset.
endif.
endloop.
Thanks,
Ravi Kanth -
Download 350MB of data from Application Server to Presentation server
i want to Download 350MB(Around 2.5Million record of Table BSEG) of data from Application Server to Presentation server..
i have tried with the transaction CG3Y and program using open dataset,read dataset,close dataset,ws_download...but went in vain,,,ended with TIMEOUT ERROR..will OPEN DATASET 'path' FOR OUTPUT FILTER 'Compress' be helpful
..please help me ..its urgent..you can do the FTP with Unix commands..
initially connect to the application server by using command
FTP <app server ip>,then it willl ask for username and password... after successful connection you can use the following commnads to transfer file
lcd <destination path name>(set the dest path)
cd <source path>(set the sorce path),
get <filename to be transfererd>( do the transfer)....
You can do same with ABAP code also, for this you need to use some function modules like..
FTP_CONNECT ( to establish the connection)
FTP_COMMAND ( to execute the commands like cd, lcd get,put)
finally FTP_DISCONNECT to close the open connection...
for further details refer standard program RSFTP002,RSFTP003....
reward points if helpful... -
Data transfer from application server to sap system in binary mode
hi friends,
can any one help me out in
how to read,open the dataset (syntax) while transfering the file from application server in binary mode ?
how to move the file to differrent location in the same server?
regards,
mohan
Message was edited by:
mohan kumardHI,
Syntax for reading the file
OPEN DATASET file FOR INPUT IN BINARY MODE
if sy-subrc = 0.
DO.
READ DATASET file INTO wa_record.
ENDDO.
CLOSE DATASET file.
endif.
syntax for writing file.
OPEN DATASET file FOR OUTPUT IN BINARY MODE .
if sy-subrc = 0.
transfer wa_record to file.
CLOSE DATASET file.
endif.
You can also transfer file from application server to presentation server using transaction CG3Y by specifying source path(app ser),destination path(presentation ser) and tranfer format (BIN).
To copy the file from one location to other location in application server
use the FM 'ARCHIVFILE_SERVER_TO_SERVER'
reward points if needful.. -
Downloading .xml/.tx data to presentation server while running background.
Hi experts,
I have a requiremnt to downloading .xml/.txt data to presentation server while running background.
when i run the program in foreground with use of GUI_upload/ Gui_download its working fine but not working in background.
i can't use email/data download to database file and than get it option as data can be huge.
Can anybody help me out regarding this.
Thanks
Anuj jainHi anjui,
it'snt possible to download a file in background using gui_download.
You could try to create a Shell Command (transaction SM69) to transfer data in a shared directory.
You can execute Os Commands using function module SXPG_COMMAND_EXECUTE
Alessandro -
File download to presentation server in BACKGROUND
Hello,
i'm trying to download a simple list to the presentation server, but in a background process (part of an update rule for an infopackage). I´ve tried WS_Download and CALL METHOD o->gui_download etc but the job cancels with them since they seem only to run in frontend. Does anyone know of a more suitable function module?
Thanks,
KevHi,
Tyr to download file to unix in background.
PARAMETERS: p_unix LIKE rlgrap-filename.
INITIALIZATION.
v_uzeit = sy-uzeit.
v_date = sy-datum.
v_client = sy-mandt.
v_sys = sy-sysid.
CONCATENATE c_str v_sys c_str4 v_client
c_str3 v_date c_str5 v_uzeit c_str6 INTO p_unix.
DATA: v_fnam LIKE rlgrap-filename,
v_filepht LIKE FILENAME-FILEINTERN, "File for p_unix
v_sys LIKE sy-sysid,
v_client LIKE sy-mandt,
v_date LIKE sy-datum,
v_uzeit LIKE sy-uzeit
FORM f3000_save_unix_file.
SORT i_output.
* Open the file in application server
OPEN DATASET p_unix FOR OUTPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE s900 WITH p_unix. " File opening error
LEAVE LIST-PROCESSING.
ENDIF.
LOOP AT i_output INTO w_output.
TRANSFER w_output TO p_unix.
CLEAR w_output.
ENDLOOP.
IF sy-subrc = 0.
WRITE:/ text-075, p_unix, text-076. " File successfully created
ELSE.
WRITE:/ text-074, p_unix. " Error creating file
ENDIF.
* Closing the file
CLOSE DATASET p_unix.
ENDFORM. " f3000_save_unix_file
Also refer this link
http://www.sapdevelopment.co.uk/file/file_updown.htm
Try this might help u. -
How to send a file downloded either to application or presentation server
Hi guys,
I had a requirement...
my program should first download a flat-file to application/presentation server and latter send this file as an attachment via email to recipient..
can you guys help me....
cheers,
HarishHi Harish,
for the download to presentation server
cl_gui_frontend_services=>gui_download.
To download the file to presentation server use
command open dataset
To transfer the file you have to use command TRANSFER
To send the file as attachment you use Function Module
SO_NEW_DOCUMENT_ATT_SEND_API1.
Make sure you commit rsconn01 after calling SO_NEW_DOCUMENT_ATT_SEND_API1 only this will trigger the sending of your mail.
Kind regards Henner -
File Upload and Download From Presentation server
I have a requirement to provide a selection option to user to upload a big file from presentation server.
Not sure whther we can a upload the entire file at one short from presentation server. PLease provide some sample code to upload a huge file from presentation server and downlaod a file to presentation server.Hi,
Try this code for download----
TABLES:
kna1. " General Data in Customer Master
TYPES:
BEGIN OF type_s_kna1,
kunnr TYPE kna1-kunnr, " Customer Number
adrnr TYPE kna1-adrnr, " Address
anred TYPE kna1-anred, " Title
erdat TYPE kna1-erdat, " Date on which record created
ernam TYPE kna1-ernam, " Name of Person who Created the
" Object
END OF type_s_kna1.
DATA:
fs_kna1 TYPE type_s_kna1.
DATA:
t_kna1 LIKE
STANDARD TABLE
OF fs_kna1.
" Select-options----
SELECT-OPTIONS:
s_kunnr FOR kna1-kunnr. " Customer Number
AT SELECTION-SCREEN ON s_kunnr.
SELECT kunnr " Customer number
FROM kna1
INTO s_kunnr UP TO 1 ROWS.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE 'No such customer exists' TYPE 'S'.
ENDIF. " IF SY-SUBRC NE 0
START-OF-SELECTION.
PERFORM customer_selection.
FORM customer_selection .
SELECT kunnr " Customer Number
adrnr " Address
anred " Title
erdat " Date of record creation
ernam " Person who created object
FROM kna1
INTO TABLE t_kna1
WHERE kunnr IN s_kunnr.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'C:\TEMP\CUSTOMER.TXT'
FILETYPE = 'ASC'
write_field_separator = 'X'
HEADER = '00'
WRITE_LF = 'X'
col_select = 'X'
col_select_mask = 'XXXXX'
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
IMPORTING
FILELENGTH =
TABLES
data_tab = t_kna1
EXCEPTIONS
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " FORM CUSTOMER_SELECTION.
for upload----
" Table declarations----
TABLES:
bkpf. " Accounting Document Header
TYPES:
BEGIN OF type_s_bkpf,
bukrs TYPE bkpf-bukrs, " Company code
belnr TYPE bkpf-belnr, " Accounting Document Number
gjahr TYPE bkpf-gjahr, " Fiscal Year
blart TYPE bkpf-blart, " Document type
bldat TYPE bkpf-bldat, " Document Date in Document
END OF type_s_bkpf.
DATA:
fs_bkpf TYPE type_s_bkpf.
DATA:
fname(10) TYPE c VALUE 'ACCOUNTING' .
DATA:
t_bkpf LIKE
STANDARD TABLE
OF fs_bkpf.
*" Select-options----
SELECT-OPTIONS:
s_bukrs FOR bkpf-bukrs, " Company code
s_gjahr FOR bkpf-gjahr. " Fiscal year
OPEN DATASET fname FOR OUTPUT IN BINARY MODE .
PERFORM account_selection.
LOOP AT t_bkpf INTO fs_bkpf.
TRANSFER fs_bkpf TO fname.
ENDLOOP. " LOOP T_BKPF
CLOSE DATASET fname.
FORM account_selection .
SELECT bukrs " Company code
belnr " Accounting document number
gjahr " Fiscal year
blart " Document year
bldat " Document date
FROM bkpf
INTO TABLE t_bkpf
WHERE bukrs IN s_bukrs
AND gjahr IN s_gjahr.
ENDFORM. " FORM ACCOUNT_SELECTION
also try
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\TEMP\CUSTOMER.TXT'
FILETYPE = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = t_kna1
EXCEPTIONS
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc EQ 0.
PERFORM customer_display.
ELSE.
MESSAGE 'No customer file exists'(006) TYPE 'S'.
ENDIF. " IF SU-SUBRC EQ 0
Regards,
jaya
Edited by: Jayapradha Neeli on May 28, 2009 11:38 AM -
Issue in material master update from presentation server using BAPI....
Hi Guru's...
i am trying to change the material master from presentation server (desktop flat file)
using BAPI(BAPI_MATERIAL_SAVEDATA) ....
while executing my program i am getting the message like material had changed...
but while in mm02 i am un able to fine the updates...
please find below program logic and correct me if any mistakes....
thanks in advance...
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead TYPE bapimathead,
gs_clientdata TYPE bapi_mara,
gs_clientdatax TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
matnr(18),
matkl(9),
spart(2),
ntgew(13),
gewei(3),
meins(3),
END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
abc(132),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = p_files
filetype = 'ASC'
CHANGING
data_tab = gt_itab2
EXCEPTIONS
OTHERS = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
gwa_itab1 = gwa_itab2-abc(132).
APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
loop at gt_itab1 into gwa_itab1.
*Material
gs_bapimathead-material = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
endloop.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_bapimathead
clientdata = gs_clientdata
clientdatax = gs_clientdatax.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF.hi hello Guru's
i resolved the issuee..
pleaso go thru the below proram logic for your reference..........
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead TYPE bapimathead,
gs_clientdata TYPE bapi_mara,
gs_clientdatax TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
matnr(18),
matkl(9),
spart(2),
ntgew(13),
gewei(3),
meins(3),
END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
abc(132),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
DATA:ls_return TYPE bapiret2,
lt_bapiret2 TYPE standard table of bapiret2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = p_files
filetype = 'ASC'
CHANGING
data_tab = gt_itab2
EXCEPTIONS
OTHERS = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
gwa_itab1 = gwa_itab2-abc(132).
APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
LOOP AT gt_itab1 INTO gwa_itab1.
*Material
gs_bapimathead-material = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
ENDLOOP.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_bapimathead
clientdata = gs_clientdata
clientdatax = gs_clientdatax
IMPORTING
return = ls_return.
LOOP AT lt_bapiret2 INTO ls_return.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF. -
How to exreact multiple pdf files from a zip files from application server to presentation server
Hello exprts,
I am passing one pdf file and one text file to zip file in apllication server through my custom program and then downloading it using standard function module to my desktop. its working fine. Then I added another pdf file to my zip file. But only single pdf file is getting download . So can you please help me regardiong this issue?Dear Experts ,
I finded out the way to extrcat pdf files in presentation server. But now my problem is that I am not able to add multiple pdf files in a zip file. When I am adding new pdf file then older one is not coming in read data set. So please kindly tell me how can I add multiple pdf file in my zip file and again I can get all the pdf files from here. -
Copy File from Presentation Server to Application Server in Background
Hi,
I need to copy Image file from Presentation Server to Application Server.
The below given code is workking fine in Foreground but whenevr I am trying to execute in Background, the job is cancelled and I am getting a dump.
data : wa_source type string,
wa_destination type string.
wa_source = 'C:\PARBIND.BMP'.
wa_destination = 'D:\PARBIND.BMP'.
start-of-selection.
call method cl_gui_frontend_services=>file_copy
exporting
source = wa_source
destination = wa_destination
* overwrite = SPACE
* EXCEPTIONS
* cntl_error = 1
* error_no_gui = 2
* wrong_parameter = 3
* disk_full = 4
* access_denied = 5
* file_not_found = 6
* destination_exists = 7
* unknown_error = 8
* path_not_found = 9
* disk_write_protect = 10
* drive_not_ready = 11
* not_supported_by_gui = 12
* others = 13
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
In backgound Error is....
Exception condition "CNTL_ERROR" raised.*
Any solution is appreciated.
Thanks
ArbindHi Arbind,
Just realize... when you run it in foreground, you have a foreground to capture the file location. so it runs fine..
but when you are running it in background, there is no foreground to check that is no gui present... how can it check where the C:\.... location is??
no need of reading any oss note... just see.. the name is cl_GUI_FRONTEND_service.. its only for front end..
u need open dataset, read dataset, close dataset kind of things while running in background. or RFCs to read the file... (search SDN). -
How to search file from presentation server
Hi All,
In a ABAP program i want to display a dialog box which will help me to find out any file from presentation server.That dialog box should be display after clicking on parameter on selection screen.Parameter is a simple variable,not a field from any internal table. so i can not use function module F4IF_INT_TABLE_VALUE_REQUEST
Please suggest me any function module which will satisfy my requirement.
Thank you.Hi,
Check this example..
DATA: T_FILETABLE TYPE FILETABLE.
DATA: RC TYPE I.
DATA: USER_ACTION TYPE I.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = T_FILETABLE
rc = RC
USER_ACTION = USER_ACTION
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Naren -
Background job output to Presentation server
Hi,
I am executing report as Background job.
after job gets completed output should be in excel format in front end or presentation server.
Regards
NagaHi,
We cannot perform any action on the presentation server in a program that is being execcuted in background. What you can do is to write the output on to the app server, and after wards move the file on to the Pres. server using CG3Y transaction.
Regards,
Ravi
Note : Please mark the helpful answers
Maybe you are looking for
-
Hello, A friend of mine has an eMac 700 MHz, and he keeps on getting the rainbow wheel frequently while using his computer. I have ran Onyx and cleared all caches, ran scripts, and repair permissions, but still it keeps on popping up. The ball usuall
-
ITunes App Store Web Service available?
Hi there, appshopper.com has great lists and rankings about iPhone apps in the App Store. Does anybody happen to know which interface the folks at appshopper use? I am not aware of any official interface (and I don't believe, they do it all manually.
-
ISE version 1.0 - Unable to get management access for cisco devices
Hi All, I want to manage all cisco devices with read and write privilege with ISE 1.0. Is this functionality is available in this version? I configured the 2960 switch. On switch redius test is successful. When I telnet to the switch, it ask for us
-
Font shift when opening PC FLA on a Mac
Hello all, I recently switched to a Mac, only to find out that all of the text in my old Windows FLA files has now been shifted slightly when I open it on the Mac. I've googled and found some posts about this issues, such as here: http://www.actionsc
-
Kernel Panic after installing Mac OSX Lion
I have a late 2009, 15" Macbook Pro that I've upgraded to mountain lion about three weeks ago and when I upgraded the first time I kept getting kernel panics like no tommorrow. I used my flash drive which had lion uploaded to it to "downgrade" to lio