Transferring file from SAP system to another system.
Hi all,
i have created a report which saves PO details of a perticular vendor into sap internal system in *.xls format.
but i need to drop that file into an external system whose ip address and password is known to me.
I am facing the access problem with ftp connect.
there is only one port open of that system. how can i connect that through the port.
with regards
Vikash.
Hi,
Check this link..http://docs.google.com/Doc?id=dfv2hmgs_21g5nmwkgw&hl=en
Are you calling HTTP_SCRAMBLE to scramble the password be passing to FTP_CONNECT FM.
Similar Messages
-
Transfering file from one system to another
Hi,
Is there any mean by which we can transfer file from one system to another without programing???
Thanks and best Regards.
Kusum.If you have Unix Utility program you can execute it with
MV source destination
Regards
Shital -
Send binary files from SAP System to SAP XI/PI
Dear experts,
in our SAP ERP-System we have a link to JPG files which are stored in an archive. We want to send these files with some other information to our SAP XI and then store them on a file server. Is there a way to send a MIME attachment via RFC? Or is there another way to send binary files from SAP ERP to SAP XI? We want to avoid polling the files on OS level.
Thanks and regards,
DavidMost recommended way is to go for ABAP proxies. They support attachments.
Regards,
Prateek -
Download Font file from SAP system to local system
Hi,
How to download Font files (.TTF) from SAP to local system.
Is there any Reports or Tcodes available?
I need to download font from one SAP system and upload it to another system.
I am referring to Russian fonts.
Kindly help me.
ThanksHi,
use the FM 'CAT_DOWNLOAD'
i think this will help
Thanks -
Transfering Files from one computer to another over the internet using ftp
I am not sure if this is the right section to post this question but i wanted to know if it was possible to use the mac ftp file sharing to transfer a file from a friends computer to mine. He is not on my network we were hoping to transfer the file over the internet the file is quite larger about 2gb. Can any one help me in telling me a way that i could do this thanks.
Enable FTP in Preferences on the target machine.
You will need the IP address...
You can find it by going here
http://whatismyip.com/
This may be a problem if the target machine is behind a router.
If all goes well... Go to Connect to Server.. and enter
ftp://ipaddress
OR
If you want to send a large file then you can check this out...
www.yousendit.com/ -
Aattach an existing Excel file to an email from SAP system.
Hi,
How can I attach an existing Excel file from SAP system (Example in 'DIR_TEMP' folder) & send a mail. Guess this requires a class with a method which picks up the file using the file path. Does CL_DOCUMENT_BCS provides this???? boz CL_DOCUMENT_BCS->ADD_DOCUMENT_AS_ATTACHMENT is for Add Existing Document as an Attachment,if so please let me know how with few lines of code??
Thankx in advance.* Local Data declarations
DATA: ls_rec TYPE somlreci1.
DATA: lp_send_request TYPE REF TO cl_bcs,
lp_document TYPE REF TO cl_document_bcs,
lp_sender TYPE REF TO if_sender_bcs,
lp_recipient TYPE REF TO if_recipient_bcs,
lp_bcs_exception TYPE REF TO cx_bcs.
DATA: lt_text TYPE soli_tab,
ls_text LIKE LINE OF lt_text,
lv_flag.
DATA: lt_tline TYPE TABLE OF tline.
DATA lv_receiver TYPE ad_smtpadr.
* DATA lt_attach TYPE soli_tab.
DATA ls_tline TYPE tline.
TRY.
* create persistent send request
lp_send_request = cl_bcs=>create_persistent( ).
* Get the text
IF iv_stxt IS NOT INITIAL.
CALL METHOD zfi_flexgl_common=>read_text
EXPORTING
iv_stxt = iv_stxt
IMPORTING
et_tline = lt_tline
ev_failed = ev_failed.
LOOP AT lt_tline INTO ls_tline.
APPEND ls_tline-tdline TO lt_text.
ENDLOOP.
ENDIF.
* create and set document
* create document from internal table with text
lp_document = cl_document_bcs=>create_document(
i_type = iv_format_type "'XLS' "HTM'
i_text = lt_text
i_subject = iv_msg_subj ).
IF it_attach IS NOT INITIAL.
* Add attachment
* DATA: l_size TYPE sood-objlen, " Size of Attachment
* l_lines TYPE i. " Lines count
* l_lines = LINES( it_attach ).
* l_size = l_lines * 255.
CALL METHOD lp_document->add_attachment
EXPORTING
i_attachment_type = 'RAW'
i_attachment_subject = 'My attachment'
* i_attachment_size = l_size
i_att_content_text = it_attach.
ENDIF.
* add document to send request
CALL METHOD lp_send_request->set_document( lp_document ).
* Sender addess
*l_sender = cl_sapuser_bcs=>create( sy-uname ).
*call method l_send_request->set_sender
* exporting
* i_sender = l_sender.
* LOOP AT it_rec INTO ls_rec.
lv_receiver = iv_rec.
TRY.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = lv_receiver
RECEIVING
result = lp_recipient.
CATCH cx_address_bcs .
ENDTRY.
CALL METHOD lp_send_request->add_recipient
EXPORTING
i_recipient = lp_recipient
i_blind_copy = abap_true
i_express = abap_true.
* ENDLOOP.
IF sy-subrc <> 0.
ev_failed = abap_true.
EXIT.
ENDIF.
* ---------- send document ---------------------------------------
CALL METHOD lp_send_request->send(
RECEIVING
result = lv_flag ).
CATCH cx_send_req_bcs.
ev_failed = abap_true.
CATCH cx_document_bcs.
ev_failed = abap_true.
ENDTRY.
IF iv_commit = abap_true.
COMMIT WORK.
ENDIF. -
How to call an EXE file on a remote system from SAP system?
Hi Friends,
I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
Thanx in advance,
RamHi Ram,
Try this
SXPG_COMMAND_EXECUTE
Reward if this helps,
Satish -
How to use utl_ftp package to transfer files from one system to another
Hi all,
How to use utl_ftp package to transfer files from one system to another using plsql procedure .
I failed to find the appropriate document ,kindly help me .
Thanks,
P Prakashprakash wrote:
I am sorry tell you, this blog is not enough to for me.It's not a blog, it's Chris' website where you download the package from. Once you download the package and unrar it, then the package spec gives instructions (and I think there's instructions on how to install it too).
Kindly let me know if there is any oracle documentation for this .It's not an Oracle created package, it was created by Chris. It's based around the UTL_TCP package if you really want to get into the nitty gritty of how it works, but I don't think you do. -
How to move files from one system to another in plsql
Hi all,
I want to move file from one system to another using plsql procedure .
Kindly let me know what package i have to use for doing this .
Thanks,
P Prakash
Edited by: prakash on Jul 27, 2011 2:20 AM
Edited by: prakash on Jul 27, 2011 2:59 AMBluShadow wrote:
That's ok if you want to diet. ;)Ooh look, the strange punctuation is back. Can it be true that the forum software has caught up with the '80s?
I almost feel like connecting to the internet using a 9600 baud modem to celebrate.
http://upload.wikimedia.org/wikipedia/commons/5/5d/TeleGuide-terminal.jpg
Colon dash right bracket.
(Old habits die hard) -
Can we send .csv file from sap srm system to sap pi?
Hi Experts,
we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
How can we send .csv file from sap srm to sap pi?
Regards,
AnjanAnjan
As you know SAP SRM and SAP PI are different boxes.
*_Option 1:_*
we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
Option 2:
Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine. You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using sender file communication channel (FTP Mode) providing user credentials.
Hope it clears now.
Regards
Raj -
Delete a .csv file from desktop system
Hi All,
My requirement is to read the .csv file from the desktop system having the shared folder and delete the file after read successfully.
Here I can read the .csv file from the location using the function RFC_REMOTE_FILE and updated the content into internal table.
But I cant delete the file from the presentation server ( Desktop system).
Can anyone tell me how to delete the .csv file from the desktop system on different location.
Note:
I followed this link to read file:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2&overridelayout=trueHi Rob,
Thanks. I solved this problem myself.
The solution to delete the file from remote system is
concatenate 'DEL' i_filename i_dirname into v_bkfile separated by space .
call function 'RFC_REMOTE_EXEC'
destination c_dest
exporting
command = v_bkfile
exceptions
system_failure = 1 MESSAGE v_ermsg
communication_failure = 2 MESSAGE v_ermsg. -
Download from SAP system to Excel sheet
Hi,
I have a list of materials, would like to download it from SAP system to an Excel sheet.
Kindly let me to know the procdure to do it.
Thanks
NDSHi,
Please execute T code MM60 or the required T code to get the list of materials and Go to sap menu Bar ->setting->list->save->local to spreedsheet and save it your desk top to create an Excel file.
Regards
Ram -
How to extract DB FILE FROM NONSAP SYSTEM IN BI-7
how to extract DB FILE FROM NONSAP SYSTEM IN BI-7
hi,
chk the links for extraction using DB
Extraction using DB connect
http://help.sap.com/saphelp_nw70/helpdata/EN/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/0ffb40af87ee6fe10000000a1550b0/frameset.htm
Extract data from oracle DB to SAP BI 7.0
Ramesh -
Import file to SAP system switch to SAP XI scenario
Hi,
we have scenario: download data from 3rd party system to the file and later on import this file to the SAP EPR system.
What possiblity we have when we want to use SAP XI? Only create new RFC functions to be able upload files? Or it is possible to re-use currect program for upload file?
And reverse scenario? We download data to file from SAP ERP and later on import to 3rd party system. It is possible to re-use program used for download data?
Thanks a lot for ideas.
Regards,
RomanHi,
Downloading data from the third party system to File system will be out of XI Job.that ur other team has to take care.
Coming to Xi
From the file system to SAP R/3 we can do using XI
File---XI-SAP R/3( Use IDOC/ RFC/ PRoxy)
In the other way also
SAP R/3( IDOC / RFC/ Proxy)--XI--File
Check this to choose the right adapter when dealing with the SAP R/3 Application
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
Regards
Seshagiri -
Ingo,
I am getting below error message in BO Test environment when I refresh WebI document.
MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details
It was working when we migrated the objects initially. Subsequently when we try to refresh WebI document we are getting the above error message. It still works in BO Dev environment and the no of records are the same in Dev and Test.
I am able run the underlying BEx query in SAP BW Test environment and it does return data.
I checked ST22 and SM21 log, but no details there.
Is it related to Authorization on the Universe or Bex Query?
We are in the middle of UAT and not able to move forward. I would greatly appreciate your input.
Thanks
RamIngo,
I ran the zip file and added the required entries to registry.
And then I tried to reproduce the error, but the files are not generated instead I noticeed below error message on the server:
The description for Event ID ( 7939 ) in Source ( Crystal OLAP Client ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Registry Access Error: , [HKEY_LOCAL_MACHINE]Software\Business Objects\Suite 12.0\MDA\Log\Modules: The system cannot find the file specified..
Does tha t mean we do not have permissons to read the registry?
I would greatly appreciate your input.
Thanks in advance.
Ram
Maybe you are looking for
-
Retrive MultiRow Result Set From Procedure
Hi, Can you please guide me, on ways to retrieve result set with more than one row from procedure. I got two ways... 1. Using Ref Cursor & 2. Using Collection Do we have any other ways also to do this. Thanks, Ashish Edited by: Ashish Thakre on May 2
-
Why does iCal sync via dotMac suddenly fail with Tiger
I've read about the Leopard and Tiger-to-Leopard syncing issues with iCal, but I have an issue that is just with Tiger (10.4.11). I have two machines running the same version of MacOS (one Intel, one PowerPC) in different countries, and a live dotMac
-
Custom Search Help in Standard Transaction?
Hi, is possible to tie a custom search help to an input field of a standard transaction? If yes, what would be the best way to achieve this? Thanks. / Elvez
-
How to upgrade mac os x 10.5.8 to Leopard
I am trying to install the Face Time on my imac but the minimum system requirement is Mac OS X 10.6.6 How can I upgrade to this version if the automatic upgrade is already in the last OS version and is 10.5.8?
-
I have checked that the flash function is on, and I have increased the brightness to maximum, none of which seem to rectify the situation. The flash seems delayed by a few milliseconds with the snapshot, so the image is the same as an image without f