Transferring/Printing e-mail from old account

My iPhone has retained several important e-mails from an IMAP account to which I no longer have access. Because I no longer have access, I can't forward them to another account. I really need to print them and have even downloaded the EuroSmartz Print n Share app to try and do this. It appears that the application needs to be able to access the email account to print, though.
Can anyone offer any advice on how to transfer or print these important e-mail?
Thanks much!
Tina

I finally made it work by updating to OS 4.3 and installing EuroSmartz' Save2PDF. It may have been possible another way but that's how I did it...and I'm happier with them in PDF anyway.

Similar Messages

  • I can't SEND e-mail from an account on my iPad 4, that CAN receive -mail

    Hi Again,
    I am hoping someone on this forum will possibly have an answer to a very confusing problem.
    I can't seem to get one of my e-mail accounts to be set up 'properly' on my iPad 4. The account in question is an account from BT, which has @btinternet.com at the end of it. I have 'installed' and deleted this account more than ten times. When setting up this account (as with all other accounts that DO work properly), the only info I am 'asked' to input is my name, e-mail address and password, in the 'text entry spaces' that relate to the INCOMING mail server. When this is done I USUALLY see the word 'verifying........' Then the 'blue tick marks' confirming that the info I have entered is correct. The validity of this info is also confirmed by the fact that this account can RECEIVE the e-mails sent to it.
    Each of the last four or five times I have deleted this e-mail account and re-installed it I have NOT seen the word 'verifying.....' And I have NOT seen the aforementioned blue ticks. Selecting 'done' after re-entering my info just makes this settings box disappear, rather than show the verifying and the blue ticks, which then allows me to see that the account is 'properly' set up - or should be anyway.
    Even so I still get all the e-mails again, but still cannot SEND, OR REPLY
    The error message I get every single time I try to SEND, OR REPLY using this same e-mail account is:
    'Cannot Send Mail'
    'The username or password for SMTP: ***********@mail.btinternet.com is incorrect'
    My username and password are NOT incorrect. The set up process does not even ask for a username or password for 'SMTP'!
    Even if I go further into the settings for this account, I can find two spaces where I COULD put a username and password, for SMTP, but these spaces already have the words 'optional' in them so they are not supposed to be 'required'. Even if I DO put in these spaces my surname and password for this e-mail account it does not make any difference.
    I have tried 'switching on' the 'other mail servers' which are shown below the 'Primary mail server' in another settings box, for the btinternet.com e-mail account settings, but this still does not stop the error message, AND the e-mail in question is then actually sent from one of the e-mail accounts connected with the 'other mail servers' - I know this because it appears in the 'sent' items folder of whichever account my iPad has decided to use at the time (not always the same one either). It also appears in the sent items folder of the account that I TRIED to use, despite the fact it was NOT sent from this account, and the error message said I cannot send mail (from this account).
    I have contacted Apple Tech Support and they have told me that the problem is NOT with the iPad, it is with the 'account provider'. This is because they say that the info held and used by BT - the info that is used as the 'correct info', that is compared to what I have put in the set up boxes on my iPad - IS actually the info that is incorrect despite the fact that the info I use on my iPad and the info I use on the BT website (which was originally determined by ME when I first got my account) and is held by BT, is the info that is causing the problem of the error message. To put it another way, the info referred to in the error message is NOT incorrect, the error message is incorrectly generated.
    Typically, BT have tried to deny the problem is caused by them because 'the info referred to' - which is my e-mail address and password - works correctly an ALL places that is supposed to work (on the BT website) AND works with the BT/iPad applications like BT Wi-Fi, BT Smart talk, etc. :( :( :(
    Any help or advice that anyone could give will be very greatly appreciated
    Many thanks
    Bob

    Update to above question:
    Hello All,
    To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
    Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
    Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
    Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
    When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
    All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
    So this fix worked for me.
    After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
    I hope this works for you on YOUR Apple devices.
    Bob

  • How to recover mail from deleted account?

    Had some problems receiving mail from an account and the service provider suggested I recreate it and try again... In doing so I deleted the old account and have lost all of the messages in the old inbox and sent mail box. I cannot find anywhere where these might have been put and expect that they have disappeared but does anyone have any tips for finding and restoring them?
    G5 Mac   Mac OS X (10.4.8)   Mail 2.1

    It all depends on the type of account and how it was configured. For IMAP-type accounts, mail is stored on the server, and setting up the account again is all that’s needed to regain access to your mail.
    If you deleted a POP account, however, then all your mail stored locally in that account’s mailboxes has certainly been wiped out, not just moved somewhere, and you were warned that this would happen by the following alert:
    Remove Account
    Are you sure you want to remove the <AccountType> account "<AccountName>"?
    This will permanently delete the account setup information, mailboxes, and messages from your computer. Messages stored on the mail server will not be affected.
    If the POP account was configured to leave mail on the server for some time instead of removing it right away when downloaded, incoming mail that’s still on the server can be re-downloaded by setting up the account again, just like for IMAP accounts, but keep in mind that this would only work for received (i.e. not sent) mail that has not yet been removed from the server.
    If the messages are not on the server, and you don’t have a backup, your only option in the case of Mail 2.x is to try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage (the files to be recovered would be different in the case of Mail 1.x). Of these, the only one I know for sure that can recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • TS3988 How can I verify my icloud account without being able to get mail from the account?

    How do I verify my icloud account without being able to get mail from that account?

    The verification email will be sent to your primary Apple ID email address.

  • HT204075 I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.

    I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.

    Is this work email account on a BES server?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What's wrong with my Apple Mail?! It only retrieves e-mails once I send an e-mail from the account concerned!

    Well, that's it really. I need to send an e-mail from an account for apple mail to retrive new incoming mail.
    This has started happening since I upgraded to Mavericks. It's very temperamental. Some days it needs massaging to get my mail (as per above), other days it works like a well-oiled machine.
    Any thoughts anyone?

    If no one replies here try the Java Mail Forum:
    http://forum.java.sun.com/forum.jspa?forumID=43

  • Mail not receiving incoming mail from gmail account

    I have an imac with 10.5 that has suddenly stopped accepting email in one of my gmail accounts, but still gets it from another. I synched my imac with my ibook earlier today. The ibook has the same problem accepts mail from the account that the imac doesn't etc.
    Any help solving this problem would be greatly appreciated.
    dc

    Hi,
    Did you select “Directory Management Service” option, if so, please make sure you configure the Central Administration application pool identity account to have the Create, delete, and manage user accounts right to the container that you specify in Active Directory.
    Did you install Exchange server 2003 in your MOSS environment? If so, you should add an SMTP connector in Exchange Server, if you don’t know how to do that, you can post your issue into the following forum:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploy/threads
    Also, please check whether your configuration meet the following requirements, If not, correct them and check the effect.
    ·         The application pool account for Central Administration, the logon account for the Windows SharePoint Services Timer service, and the application pool accounts for your Web applications should have the correct permissions to the e-mail drop folder.
    ·         The domain controller running Active Directory has a Mail Exchanger (MX) entry in DNS Manager for the mail server that you plan to use for incoming e-mail.
    For more information about how to configure incoming e-mail settings, please refer to the following article:
    Configure incoming e-mail settings
    http://technet.microsoft.com/en-us/library/cc262947.aspx
    Introduction to incoming e-mail
    http://office.microsoft.com/en-us/sharepointtechnology/HA100823061033.aspx
    Demo: Configure a SharePoint Server 2007 site to receive e-mail
    http://office.microsoft.com/en-us/sharepointserver/HA102047921033.aspx?pid=CH101788401033
    Enable and configure e-mail support for a list or library
    http://office.microsoft.com/en-us/sharepointtechnology/HA100823071033.aspx?pid=CH101215271033
    Rock  Wang 
    Rock Wang– MSFT

  • I frequently receive a notice from Mail that it "can't connect" to my yahoo mail account, despite the fact that I can receive mail from that account. The banner appears with my coded password highlighted and asks me to choose 'cancel' or 'ok'.

    I frequently receive a notice from Mail that it 'can't connect' to my Yahoo account despite the fact that I am able to receive mail from that account. It appears with the name of my Yahoo account, my password (coded), and the choice to 'cancel' or 'ok'. If I click either, the banner goes away but comes back soon. I can open Mail and see that all accounts are online. I get the banner SEVERAL time during a session - very annoying!
    I have several accounts, but this only happens with Yahoo and sometimes Hotmail. Can anyone tell me how to resolve this Mail issue?
    Thanks.

    I have 5 IMAP and 1 POP (Hotmail).
    The Yahoo is IMAP.

  • Sending mail from alias accounts Sweden. iPhone.???????

    Sending mail from alias accounts Sweden.
    STILL cant send mail from my iPhone via one of my e-mail alias accounts???
    sooo much time has gone by
    so many updates to iPhone and my operating system
    new iPhone on the way here and...
    still cant send mail from my iPhone
    yes i can set up another account through a third party
    NO i dont want this. i expect to be able to use the mac mail i already have...
    anyone know whats going on?
    Have i missed apples solution to this.
    anyone know how its done and...
    please dont say sign up with someone else or create an account with someone else
    For the record yes i can use my mail from my iPhone BUT BUT BUT it shows my ORIGINAL email account address BAD BAD BAD.
    answer anyone!!!

    I have to agree with you , I too was disappointed to see that with IOS 4 on my iphone I still cant send from an alias. This is a feature thats available with the .me web access so why not the iphone mail app? If they can't do it, then at least let me be able to use .me via safari on the iphone and ipad.
    Joe
    Message was edited by: Joe Tye

  • Ipad 2 not auto receiving mail from IMAP account

    Hi, I have an iPad 1 & 2 and an iPhone 3Gs.
    I have may email accounts with different servers, Apple, Yahoo, Google & 1&1.
    All auto receive mail via push, except for the 1&1 acc on the iPad2.
    Checked & double checked settings are same as on iPhone & iPad 1 which both receive mail from that account without issues.
    The only way I can get to see new mail from the 1&1 acc on it is to open the mail app and sit back for it to come in!
    What could I possibly be doing wrong? Is anyone else having the same issue?

    I am. I have a G5 and an iPad. I can get my mail from the G5, or by logging onto the server via Internet, but my mail app tells me it can't connect to the server. I've tried all the fixes on the other, similar threads... Set both fetch to manual, hard restart, reconfigure, etc. I can get it to work once after hard reboot.

  • Trying to Import music i purchased from old account to new & can't remember old account info

    Trying to Import music i purchased from old account to new & can't remember old account info nor does it exsist.  what to do???   thanks

    This isn't really an iTunes Match questions but I'll give it a shot.
    Unfortunately, you must remember the username and password for that account. If you can't you won't be able to play that protected music. There's really no way around this.

  • Batch deleting mail from an account

    I'm frustrated when I get a few days of mail from my account on my iPhone and I have to mark each individual piece of e-mail one by one to set them up for deletion. Am I missing something? Is there a way to click on "Edit" in mail and then tell your phone you want to mark every e-mail for deletion? If I could do that, and then simply uncheck the few that I might want to keep around, it would be wonderful. This is such a simple thing that I would think the Mail program on the phone would have this feature. Perhaps I'm just missing how to do it.
    There is a way to mark all your e-mails, but that's to flag them, not delete them.
    Can anyone help?
    Thanks.
    Jeff Brody
    Silverdale, WA

    It wouldn't be easy to delete by accident if you had to affirm your choice through a dialog box. That just seems like something that should be part of the software.
    Is there any way to request that something like this be added to the software? Is there a place in the support community where we can request such features?
    Jeff

  • Can you recover mail from deleted account?

    Using Mail 2.0.5, I kept getting a message that port 25 was blocked, and couldn't receive mail from that account. I didn't think to check .mac for solution, but created a new mail account under a different name, with the same settings. When it worked, I deleted the original account...but didn't realize I'd lose all the mail associated with it in my mail program. Thought it would be stored someplace, but I can't find it anywhere. Is there any way to recover mail from a deleted Mail account?

    Never did find a solution to this. However because we are using IMAP accounts most of the mail was cached on the client Macs. So I offlined them, loaded Mail, copied all the mail into local mailboxes, recreated the users, went online and copied the mail back into the new hierarchy.
    Still can't believe I did such a daft thing!

  • I have four accounts on my mail application. but whenever i send a mail from one account, it goes through other account.

    i have four accounts on my mail application. but whenever i send a mail from one account, it goes through other account.

    Look at Mail / Accounts, then choose the Account icon. See if the Outgoing server box is set to the correct entry for each of your accounts.

Maybe you are looking for

  • HP Printer Software Installation will not complete

    I have an HP Officejet 8500 wireless bought in late 2011.  Never an issue until a recent new printer added to the computer seems to have changed an unknown setting and now printer or computer will not recognize or initiate a wireless print request. 

  • How to use BO SDK in local java project?

    Hi, I am trying to connect BO system using below mentioned code public void main(String args[]) throws SDKException {      try           System.out.println("main");           /ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();/           IEn

  • Transfer tax code shopping cart to purchase order

    Hi guys, Got an issue with regards to taxes. Went through the forum, but wasn't able to find a conclusiver answer. So I'm a bit lost. We're on SRM5, SP18 ECS version. We modify the tax code in the shopping cart based on certain punch out catalogs. Th

  • Where is eject card after import in lightroom 4.1?

    where is the "eject card after import" in lightroom 4.1? 'Devices', which is  under 'Sources' (for import)  has dissapeared, and only 'files'shows, The 'eject after import'  phrase and it'scheckbox has vanished. How do I get it back? Thanks Steve

  • Links / Documentation On Project Systems

    Dear All Could you provide documentation / links for Project Systems Module. Thanks Suresh