Transferring Work Centers and capacities with IDocs

Hi all,
I am trying to transfer Work Centers between two R/3 systems. I generate the LOIWCS Idocs (Work Center type is missing there, I will have to enhance the structure I guess), and want to implement the creation/modification on the receiving system, based on the IDoc information.
Until now I also have found FM CRAP_WORKCENTER_CREATE (which has very different structures as parameters as the segments of the IDoc), but not really much about the update possibilities. I am thinking on using FM CR_WORKCENTER_UPDATE, but i see it just changes the tables, without checking consistency of many of the fields, and I think it might be very dangerous... And it also doesnt create entries in KAKO, which I need. It would really help if someone has implemented something similar, and could give a hint (always doint the triansfer via IDOCs)... Thanks a lot!!!

Dear Neal,
First check in T code CA51 ,whether it suits your requirement.
Or Else create a standard Query using T code SQ02 - Infoset creation followed by query creation using SQ01 by linking tables
MAPL,PLAS,PLPO,Select the input & the output fields required.
This will solve your issue.
Regards
Mangalraj.S

Similar Messages

Partial picking and PGI (with Idoc)

Hello
a) We have a scenario where we would like to achieve partial picking and PGI with Idoc:
For example
In the delivery the delivery qty is 10 from the beginning, but we would like to pick only 7 and perform the PGI anyway. The 3 remaining units should remain open and create a new delivery with VL10 or whatever. For the picking confirmation we are using SHP_OBDLV_CONFIRM_DECENTRAL03. We are not using WM, just inventory management in this scenario.
We know that per standard SAP functionality the picking quantity must match the delivery quantity when doing the PGI.
b) However: we have another scenario where we run picking and confirmation from a DWMS, where all confirmations are made by the idoc type SHP_OBDLV_CONFIRM_DECENTRAL03. In this scenario, it is possible to achieve the partial picking and PGI.
So my questions are really:
1) Anyone knows why SHP_OBDLV_CONFIRM_DECENTRAL03 would post partial picking PGI with DWMS succesfully, and not with a "normal" scenario where there is no DWMS in use, just a normal plant/storage location?
2) Anyone knows a suitable idoc type to achieve partial picking idoc, one where the picking qty and the delivery qty could be adjusted at the same time so that picked and delivery quantities would be exactly the same?
3) Any suitable user exit that could be used in order to change the delivery qty according to what has been picked for the delivery? Some success stories around it would be appreciated.
Thanks in advance,
OT

Hi,
I am not able to get the details whether you want to know the information about the Inbound Idoc or Outbound Idoc. But you want to do the picking and packing of the delivery then I can presume that you are doing the Inbound process.
In that case you can do use the process code SDPI which has the message type SDPICK. In this we have the function module SD_IDOC_INPUT_PICKING which can do the picking and PGI of delivery.
In this you can also change the delivery quantity if you are not picking up the whole quantity from the plant. So it allows you to change the delivery quantity and then do the PGI for the same.
Regards
Suneet

Howto? Working in and out with clips/timeline to ST Pro?

I need your help!
I have a feature-length documentary film which is essentially done and am just now starting to work with ST Pro for audio cleanup. I have FCP Studio with the most recent updates installed from Apple. Here's my problem...
Let's say I have a 5-second clip from tape #4 laid into my sequence timeline and I'd like to send the audio of that clip to ST for 60-hertz hum removal. That clip is pulled from a full 60-minute transfer of a tape which may contain more than one scene (say an interview, exterior B-roll, and another interview, all on the same tape). Okay, so I highlight the audio (in this case only one active channel) and I right-click it on the timeline to "Send To.... Soundtrack Audio File" (or something like that), as opposed to a "Send To.... Soundtrack Multitrack Audio File." So... Soundtrack opens and the waveform appears BUT rather than just the 5-seconds of audio, it has pulled in the entire audio from the whole tape #4!
Now, I can SORT OF work with this in that I can carefully find the 5-seconds, hit "Analyze" and stuff, but then the whole tape seems to get processed in addition to only the part I want. This appears to affect the entire audio of all the scenes, which may or may not be used elsewhere in the sequence or elsewhere. Not to mention the fact that the processing time is FOREVER.
If I conversely send the clip out as a "Sountrack Multitrack" the audio I'm interested in still is nested within the entire audio from the tape.
What do I need to do so that I can work side by side with Soundtrack as I refine bits and pieces of audio as I continue to refine my entire edited project? Do I need to do something back in FCP
I have posted this issue on CreativeCow.net but haven't had any response. I hope I have laid out my issue clearly for your responses!
Thank you in advance for any advice.
J. Carlos Peinado
www.waterbuster.org

Hi,
This might help: When the clip is opened in Soundtrack Pro, there are markers for the start and end point corresponding to the clip in FCP. You can double-click between these markers to select just the region used in the clip. Then when you apply process effects, noise reduction, etc. they will only apply to the the selected region used in the clip. The fact that you get the entire captured media with markers for the clip is sometimes useful (e.g. you need to apply noise reduction to the entire bit of media) and sometimes not.
Anyway, I hope that helps.

I do NOT like the new Firefox. I do alot of work back and forth with pages, with this new system it slows me down. How can I restore my older version

I work on Bay listing items, I have to go back and forth on sites. The new firefox dosn`t allow this. It has back arrows, but pop up asking request are very annoying, and take much more time, The older version would allow me to drop down to the previous pages..I want my old version back. This new version has a whole lotta extra unneeded crap that just takes L O N G E R to load.. It sucks..How can I restore the older version

See this thread:
https://discussions.apple.com/thread/4661473
It contains instructions for downgrading to iTunes 10 and also an explanation of how to use the new search features from tt2 if you want to try again with iTunes 11.

Has anyone experienced issues with the new 6.0 update. Hotspot does not work now and issues with Wi-Fi

Since putting new operating system of 6.0 on several iPhones.....the hotspot will no longer work and either does Wi-Fi

Use the search box at the upper right hand corner of this page
Look to the right in the "MORE LIKE THIS" area

Does powerpoint now work fwds and backwards with swf ?

Hi
Flash CS5
Powerpoint 2007
Having followed correct procedure to place an swf into powerpoint 2007, it played fine heading in a positive direction through the slides, 1,2,3,4,5,6 etc but then returning back to the page with the swf on it, it was still at the END of the movie, we needed not to see the end result but for it to play again.
Now that Powerpoint is at 2013, has this problem been fixed.
Unable to go for upgrade due to financial company rules but maybe knowing it is solved an exception could be made.
Envirographics

Hi,
Good point.
Probably one for dual posting as flash users would certainly know of the fact of this happening if they tried for powerpoint, whilst powerpoint users might not even know of flash !
I'll try over there also, but there have to be some flash users who have had fun and games in powerpoint and I seek their experiences as much as powerpoint users, and they are more likely to be on this forum normally.
Also that would have to be a Microsoft forum and so I would have to go through the rigmarole of joining it, getting permission from employer etc, not straightforward.
Envirographics

Could not Set Xmonad to Work Starts and Stops With a Black Screen

Folks I've installed xmonad here. So I edited 2 files:
cat .xinitrc
#exec startkde
#exec ck-launch-session gnome-session
# set the cursor
xsetroot -cursor_name left_ptr
# set German keyboard layout
setxkbmap -layout br
exec ck-launch-session xmonad
exec xmonad
and
cat .xmonad/xmonad.hs
import XMonad
main = do
xmonad $ defaultConfig
{ terminal = myTerminal
, modMask = myModMask
, borderWidth = myBorderWidth
-- yes, these are functions; just very simple ones
-- -- that accept no input and return static values
myTerminal = "urxvt"
myModMask = mod4Mask -- Win key or Super_L
myBorderWidth = 3
Thou when I start xmonad all I get is a black screen. What am I missing?

karol wrote:Can you post /var/log/Xorg.0.log?
[ 6504.874]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 6504.875] X Protocol Version 11, Revision 0
[ 6504.875] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 6504.875] Current Operating System: Linux mordor 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 6504.875] Kernel command line: root=/dev/disk/by-uuid/8084cf06-452a-4e04-a89a-0f017461b727 ro
[ 6504.875] Build Date: 09 July 2011 07:52:32AM
[ 6504.875]
[ 6504.875] Current version of pixman: 0.22.2
[ 6504.876] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6504.876] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6504.877] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 21 02:12:32 2011
[ 6504.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 6504.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6504.877] (==) ServerLayout "Layout0"
[ 6504.877] (**) |-->Screen "Screen0" (0)
[ 6504.877] (**) | |-->Monitor "Monitor0"
[ 6504.878] (**) | |-->Device "Device0"
[ 6504.878] (**) |-->Input Device "Keyboard0"
[ 6504.878] (**) |-->Input Device "Mouse0"
[ 6504.878] (==) Automatically adding devices
[ 6504.878] (==) Automatically enabling devices
[ 6504.878] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6504.878] Entry deleted from font path.
[ 6504.878] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 6504.878] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6504.878] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6504.878] (WW) Disabling Keyboard0
[ 6504.878] (WW) Disabling Mouse0
[ 6504.878] (II) Loader magic: 0x7d3440
[ 6504.878] (II) Module ABI versions:
[ 6504.878] X.Org ANSI C Emulation: 0.4
[ 6504.878] X.Org Video Driver: 10.0
[ 6504.878] X.Org XInput driver : 12.2
[ 6504.878] X.Org Server Extension : 5.0
[ 6504.878] (--) PCI:*(0:1:0:0) 10de:1200:1462:2382 rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 6504.878] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6504.878] (II) LoadModule: "extmod"
[ 6504.879] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 6504.879] (II) Module extmod: vendor="X.Org Foundation"
[ 6504.879] compiled for 1.10.3, module version = 1.0.0
[ 6504.879] Module class: X.Org Server Extension
[ 6504.879] ABI class: X.Org Server Extension, version 5.0
[ 6504.879] (II) Loading extension MIT-SCREEN-SAVER
[ 6504.879] (II) Loading extension XFree86-VidModeExtension
[ 6504.879] (II) Loading extension XFree86-DGA
[ 6504.879] (II) Loading extension DPMS
[ 6504.879] (II) Loading extension XVideo
[ 6504.879] (II) Loading extension XVideo-MotionCompensation
[ 6504.879] (II) Loading extension X-Resource
[ 6504.879] (II) LoadModule: "dbe"
[ 6504.879] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 6504.879] (II) Module dbe: vendor="X.Org Foundation"
[ 6504.879] compiled for 1.10.3, module version = 1.0.0
[ 6504.879] Module class: X.Org Server Extension
[ 6504.879] ABI class: X.Org Server Extension, version 5.0
[ 6504.879] (II) Loading extension DOUBLE-BUFFER
[ 6504.879] (II) LoadModule: "glx"
[ 6504.879] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6504.887] (II) Module glx: vendor="NVIDIA Corporation"
[ 6504.887] compiled for 4.0.2, module version = 1.0.0
[ 6504.887] Module class: X.Org Server Extension
[ 6504.887] (II) NVIDIA GLX Module 275.19 Tue Jul 12 18:31:51 PDT 2011
[ 6504.887] (II) Loading extension GLX
[ 6504.887] (II) LoadModule: "record"
[ 6504.887] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 6504.887] (II) Module record: vendor="X.Org Foundation"
[ 6504.887] compiled for 1.10.3, module version = 1.13.0
[ 6504.887] Module class: X.Org Server Extension
[ 6504.887] ABI class: X.Org Server Extension, version 5.0
[ 6504.887] (II) Loading extension RECORD
[ 6504.887] (II) LoadModule: "dri"
[ 6504.887] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 6504.887] (II) Module dri: vendor="X.Org Foundation"
[ 6504.887] compiled for 1.10.3, module version = 1.0.0
[ 6504.887] ABI class: X.Org Server Extension, version 5.0
[ 6504.887] (II) Loading extension XFree86-DRI
[ 6504.887] (II) LoadModule: "dri2"
[ 6504.887] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6504.887] (II) Module dri2: vendor="X.Org Foundation"
[ 6504.887] compiled for 1.10.3, module version = 1.2.0
[ 6504.887] ABI class: X.Org Server Extension, version 5.0
[ 6504.887] (II) Loading extension DRI2
[ 6504.887] (II) LoadModule: "nvidia"
[ 6504.888] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6504.888] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6504.888] compiled for 4.0.2, module version = 1.0.0
[ 6504.888] Module class: X.Org Video Driver
[ 6504.888] (II) NVIDIA dlloader X Driver 275.19 Tue Jul 12 18:15:26 PDT 2011
[ 6504.888] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6504.888] (--) using VT number 7
[ 6504.894] (II) Loading sub module "fb"
[ 6504.894] (II) LoadModule: "fb"
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6504.894] (II) Module fb: vendor="X.Org Foundation"
[ 6504.894] compiled for 1.10.3, module version = 1.0.0
[ 6504.894] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6504.894] (II) Loading sub module "wfb"
[ 6504.894] (II) LoadModule: "wfb"
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6504.894] (II) Module wfb: vendor="X.Org Foundation"
[ 6504.894] compiled for 1.10.3, module version = 1.0.0
[ 6504.894] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6504.894] (II) Loading sub module "ramdac"
[ 6504.894] (II) LoadModule: "ramdac"
[ 6504.894] (II) Module "ramdac" already built-in
[ 6504.894] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6504.894] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6504.894] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6504.894] (==) NVIDIA(0): RGB weight 888
[ 6504.894] (==) NVIDIA(0): Default visual is TrueColor
[ 6504.894] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6505.241] (II) NVIDIA(GPU-0): Display (LG Electronics L196WTQ (CRT-0)) does not support
[ 6505.241] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 6505.242] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 6505.242] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 6505.242] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00
[ 6505.242] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6505.242] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 6505.242] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at
[ 6505.242] (--) NVIDIA(0): PCI:1:0:0
[ 6505.242] (--) NVIDIA(0): LG Electronics L196WTQ (CRT-0)
[ 6505.242] (--) NVIDIA(0): LG Electronics L196WTQ (CRT-0): 400.0 MHz maximum pixel clock
[ 6505.281] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 6505.281] (==) NVIDIA(0):
[ 6505.281] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 6505.281] (==) NVIDIA(0): will be used as the requested mode.
[ 6505.281] (==) NVIDIA(0):
[ 6505.281] (II) NVIDIA(0): Validated modes:
[ 6505.281] (II) NVIDIA(0): "nvidia-auto-select"
[ 6505.281] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 6505.307] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 6505.307] (--) NVIDIA(0): option
[ 6505.307] (--) Depth 24 pixmap format is 32 bpp
[ 6505.307] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 6505.307] (II) NVIDIA: access.
[ 6505.311] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 6505.311] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 6505.311] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 6505.311] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 6505.311] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 6505.311] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 6505.311] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 6505.311] (II) NVIDIA(0): Config Options in the README.
[ 6505.313] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 6505.360] (II) Loading extension NV-GLX
[ 6505.411] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6505.411] (==) NVIDIA(0): Backing store disabled
[ 6505.411] (==) NVIDIA(0): Silken mouse enabled
[ 6505.412] (**) NVIDIA(0): DPMS enabled
[ 6505.412] (II) Loading extension NV-CONTROL
[ 6505.412] (II) Loading extension XINERAMA
[ 6505.412] (II) Loading sub module "dri2"
[ 6505.412] (II) LoadModule: "dri2"
[ 6505.412] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6505.413] (II) Module dri2: vendor="X.Org Foundation"
[ 6505.413] compiled for 1.10.3, module version = 1.2.0
[ 6505.413] ABI class: X.Org Server Extension, version 5.0
[ 6505.413] (II) NVIDIA(0): [DRI2] Setup complete
[ 6505.413] (==) RandR enabled
[ 6505.413] (II) Initializing built-in extension Generic Event Extension
[ 6505.413] (II) Initializing built-in extension SHAPE
[ 6505.413] (II) Initializing built-in extension MIT-SHM
[ 6505.413] (II) Initializing built-in extension XInputExtension
[ 6505.413] (II) Initializing built-in extension XTEST
[ 6505.413] (II) Initializing built-in extension BIG-REQUESTS
[ 6505.413] (II) Initializing built-in extension SYNC
[ 6505.413] (II) Initializing built-in extension XKEYBOARD
[ 6505.413] (II) Initializing built-in extension XC-MISC
[ 6505.413] (II) Initializing built-in extension SECURITY
[ 6505.413] (II) Initializing built-in extension XINERAMA
[ 6505.413] (II) Initializing built-in extension XFIXES
[ 6505.413] (II) Initializing built-in extension RENDER
[ 6505.413] (II) Initializing built-in extension RANDR
[ 6505.413] (II) Initializing built-in extension COMPOSITE
[ 6505.413] (II) Initializing built-in extension DAMAGE
[ 6505.414] (II) Initializing extension GLX
[ 6505.507] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6505.507] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6505.507] (II) LoadModule: "evdev"
[ 6505.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.507] (II) Module evdev: vendor="X.Org Foundation"
[ 6505.507] compiled for 1.10.0, module version = 2.6.0
[ 6505.507] Module class: X.Org XInput Driver
[ 6505.507] ABI class: X.Org XInput driver, version 12.2
[ 6505.507] (II) Using input driver 'evdev' for 'Power Button'
[ 6505.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.507] (**) Power Button: always reports core events
[ 6505.507] (**) Power Button: Device: "/dev/input/event1"
[ 6505.522] (--) Power Button: Found keys
[ 6505.522] (II) Power Button: Configuring as keyboard
[ 6505.522] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 6505.522] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 6505.522] (**) Option "xkb_rules" "evdev"
[ 6505.522] (**) Option "xkb_model" "evdev"
[ 6505.522] (**) Option "xkb_layout" "br"
[ 6505.522] (**) Option "xkb_variant" "abnt2"
[ 6505.543] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6505.543] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6505.543] (II) Using input driver 'evdev' for 'Power Button'
[ 6505.543] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.543] (**) Power Button: always reports core events
[ 6505.543] (**) Power Button: Device: "/dev/input/event0"
[ 6505.579] (--) Power Button: Found keys
[ 6505.579] (II) Power Button: Configuring as keyboard
[ 6505.579] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 6505.579] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 6505.579] (**) Option "xkb_rules" "evdev"
[ 6505.579] (**) Option "xkb_model" "evdev"
[ 6505.579] (**) Option "xkb_layout" "br"
[ 6505.579] (**) Option "xkb_variant" "abnt2"
[ 6505.582] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event3)
[ 6505.582] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6505.582] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 6505.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.582] (**) Genius Optical Mouse: always reports core events
[ 6505.582] (**) Genius Optical Mouse: Device: "/dev/input/event3"
[ 6505.606] (--) Genius Optical Mouse: Found 3 mouse buttons
[ 6505.606] (--) Genius Optical Mouse: Found scroll wheel(s)
[ 6505.606] (--) Genius Optical Mouse: Found relative axes
[ 6505.606] (--) Genius Optical Mouse: Found x and y relative axes
[ 6505.606] (II) Genius Optical Mouse: Configuring as mouse
[ 6505.606] (II) Genius Optical Mouse: Adding scrollwheel support
[ 6505.606] (**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6505.606] (**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6505.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input8/event3"
[ 6505.606] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE)
[ 6505.606] (II) Genius Optical Mouse: initialized for relative axes.
[ 6505.606] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 6505.606] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 6505.606] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 6505.606] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 6505.606] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 6505.606] (II) No input driver/identifier specified (ignoring)
[ 6505.606] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event4)
[ 6505.606] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 6505.606] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 6505.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.606] (**) USB-compliant keyboard: always reports core events
[ 6505.606] (**) USB-compliant keyboard: Device: "/dev/input/event4"
[ 6505.646] (--) USB-compliant keyboard: Found keys
[ 6505.646] (II) USB-compliant keyboard: Configuring as keyboard
[ 6505.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4/event4"
[ 6505.646] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 6505.646] (**) Option "xkb_rules" "evdev"
[ 6505.646] (**) Option "xkb_model" "evdev"
[ 6505.646] (**) Option "xkb_layout" "br"
[ 6505.646] (**) Option "xkb_variant" "abnt2"
[ 6505.646] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event5)
[ 6505.646] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 6505.646] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 6505.646] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6505.646] (**) USB-compliant keyboard: always reports core events
[ 6505.646] (**) USB-compliant keyboard: Device: "/dev/input/event5"
[ 6505.662] (--) USB-compliant keyboard: Found 1 mouse buttons
[ 6505.662] (--) USB-compliant keyboard: Found scroll wheel(s)
[ 6505.662] (--) USB-compliant keyboard: Found relative axes
[ 6505.662] (--) USB-compliant keyboard: Found x and y relative axes
[ 6505.662] (--) USB-compliant keyboard: Found absolute axes
[ 6505.662] (--) USB-compliant keyboard: Found keys
[ 6505.662] (II) USB-compliant keyboard: Configuring as mouse
[ 6505.662] (II) USB-compliant keyboard: Configuring as keyboard
[ 6505.662] (II) USB-compliant keyboard: Adding scrollwheel support
[ 6505.662] (**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 6505.662] (**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6505.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input5/event5"
[ 6505.662] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 6505.662] (**) Option "xkb_rules" "evdev"
[ 6505.662] (**) Option "xkb_model" "evdev"
[ 6505.662] (**) Option "xkb_layout" "br"
[ 6505.662] (**) Option "xkb_variant" "abnt2"
[ 6505.662] (II) USB-compliant keyboard: initialized for relative axes.
[ 6505.662] (WW) USB-compliant keyboard: ignoring absolute axes.
[ 6505.663] (**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 6505.663] (**) USB-compliant keyboard: (accel) acceleration profile 0
[ 6505.663] (**) USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 6505.663] (**) USB-compliant keyboard: (accel) acceleration threshold: 4
[ 6505.663] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse1)
[ 6505.663] (II) No input driver/identifier specified (ignoring)
[ 6505.665] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 6505.665] (II) No input driver/identifier specified (ignoring)
[ 6525.656] (II) USB-compliant keyboard: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) USB-compliant keyboard: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) Genius Optical Mouse: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) Power Button: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev
[ 6525.656] (II) Power Button: Close
[ 6525.656] (II) UnloadModule: "evdev"
[ 6525.656] (II) Unloading evdev

Can I prioritize work centers and do scheduling?

Dear PP experts,
I have following scenario:
1. Sales order released and Planned order created.
2. System automatically check capacity of machine A, B and C (A. B , C have different efficiency and can delivery product in 2, 3, 4 days correspondingly )
I'd like the scheduling is proposed to machine A if the capacity of it is below 80%. other wise, goes to B/C. At the same time system will tell me the available date of the product. (today + 2 or 3 or 4 days)
Is it possible and how to do it ?
Thank you!

Hi Fifiyu
Yes it is possible, using Production version and maintaining Quota arrangement in MRP2 view
Regards

MSI GT683dxr P1 and Turbo not working.. and Prob with Temps

my system info
and heres the sensors
SO WHENEVER IM PLAYING A GAME ITS LIKE LAGGY SOMETIMES FREEZING. BUT I THINK MY SPECS ARE GOOD WHEN I CHECK ON THE SYS REQUIREMENTS.
PLEASE HELP AND SOME ADVICE..............................

thanks for responding..
it was soldier front 2.. call of duty ghost.. startcraft 2..
it was not like this before..i dont know what happend since ive lost my p1 and turbo button functions my laptop became weak :-(

Ipod classic (photo) and windows version not recognized by itunes on my macbook air. Iphone works fine and previously it also worked out with the Ipod. If someone has an answer that would be great. thanks

itunes on my mac does not any longer show my ipod classic (photo, window formated). It worked before and itunes with iphone just works fine. Any clue? Thanks.

Sorry to jump the gun, but did you connect the iPod via USB Hub on the MB Air?
If plug it into the wrong USB port, which is shared like using a USB Hub, I would suggest connecting the iPod directly to the MB Air and not via USB Hub.
But if you connect directly, have the iPod ever connect to iTunes, without problems, on this MB Air?
You got an old 4G iPod photo, based on iPod Software version 1.2.1
I mean downgrade to the iTunes version, that was working, with your iPod, but try the right USB port first before downgrading iTunes, with earlier version download here.
http://support.apple.com/downloads/#itunes
Have a nice day!

Main Work Centers

Hi,
Would like to know what exactly main work centers are ? How are they different from regular (operational) work centers ?
Is any configuration different for creating main work centers as compared to work centers ?
What is the hierarchy 'option' in the work center creation used for ? Is there a hierarchical relationship between Main work centers and work centers as far as comfiguration is concerned .
Appreciate any help.
Thanks,
Kingfischer

Dear King Fischer,
There are types & cat if we need to sepatre work centres in the customerisation if it needed normally it does not need in PM.
But in large detail planning etc. It may be used by business.
Following are the extracts for difference as per SAP.
The Main Work Center
The main work center must be entered in the order header, whereupon its master data is copied into the order as a default.
During internal processing, the main work center is also used as a default for the performing work center.
In addition to the main work center, you can create a specific employee, who has been represented in the Human Resources (HR) component with their own master record, as Person responsible.
The Performing Work Center
In addition to the main work center, you can create a specific employee, who has been represented in the Human Resources (HR) component with their own master record, as Person responsible. You can also assign other employees to an operation in the Requirement assignment.
The performing work center is managed in the operation data for the order. It is proposed as a performing work center for the operations in the order. Since capacities are assigned to the performing work center and costs assigned using the activity type, the performing work center is required primarily for capacity planning, scheduling and cost determination.
It is also possible to create operations without entering a performing work center. A control key, which is not linked to a cost center or an activity type, must then be assigned to these operations. It may be that the operations are simply used for documentation purposes, for example, operations that only contain safety instructions or specifications for the production/resources tools to be used. Operations without a specified performing work center are also used in external processing.
The Work Center as Production Machine
The work center as production machine is managed in the location data for the technical object of an order. It is only entered if the technical object at which maintenance work should be executed is a machine in Production.
Since machine capacities are assigned to the work center as production machines, the work center as production machine is required primarily for capacity planning of the machine, for example, non-operational periods for the machine must be planned as effectively as possible.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/d7/45f364b10811d2a5e30060087a7a74/frameset.htm
Ramesh

Work centers

Sir,
In equipment
Location Tab work center is there
and also in organisation tab main work center is there
what is the difference between there 2 work centers.
and which work center we need to assign cost center.
in order
Main work center
work center/ plant
what is the difference between these two
and which work center we need to assign cost center.
Sai Meghana

Hi,
Work center in location tab is for integration with PP.
In PP module equipment is an work center for them and to have integration the same work center has to be included there.
Work center in organization tab is responsible for maintenance activities for that equipment.
The same work would be copied to order to take up maintenance activities mentioned in the operation tab in order.
What ever the cost center maintained in organization tab is cost receiver of the order by default.
Regards,
Sudhakar

Different Work Centers

Hi,
I have 5 work centers for producing same final goods. I want to produce FG against production order at user desired work center. for ex work center 3. Where i have to assign these all work centers and option of choosing in production order?

Hi,
Pl. check in your production version, whether you get the result as<b> task list exists & BOM exists</b> after clicking the check tab for all production version, check the validity dates & lot size also.
Also production versions should not be locked in c223.
Also check in opl8 if you have maintained manual selection of production version for the respective <b>plant & order type</b>.If it is maintained, the system will pop-up a screen to select prod version during order creation.
Regards,
Senthilkumar

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

My daughters Ipod Touch is stuck with a black/blue screen. She downloaded the game Breakaway from the App store yesterday and today she opened the game it said this game is not connected to game centers and the screen went black/blue reset didn't work

She downloaded the game Breakaway from the App store yesterday and today when she opened the game it said "this game is not connected to game centers" and the screen went black/blue. I tried resetting without the power adapter and with the power adapter and nothing happens. She has only had the Itouch for 2 weeks.

I did try that numerous times and nothing happened. However, I did eventually get it to work. After trying to reset it numerous times and the screen still just staying frozen I logged into the Home Share portion on the Home computer and deleted the Bubble Birds game. Eventually the Itouch died and I was finally able to reset it by plugging it in and holding down the buttons. I doubt the deletion of the game helped, but since it seemed to be the cause, I went ahead and deleted it. Thank you for your reply.

Transferring Work Centers and capacities with IDocs

Similar Messages

Maybe you are looking for