Transforming the Raster Data between Databases

Hi
I have a Requirement to Import and Export The Raster Data Between Data bases .. Could Any Body Give Me Hint...
Rajanikanthc

NedimAT pointed you to the 10g manual. If your database is 11g, please check it out from the 11g manual, Section 3.21 Transferring GeoRaster Data Between Databases:
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e11827/geor_operations.htm#CIHECFGC
Depending on your requirements and the source and target database environments, you may also consider using Transportable Tablespace to transfer the raster data, particularly when you want to transfer only part of the database based on queries or cropping areas. Check section 3.22:
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e11827/geor_operations.htm#CHDGEGHB
hope this helps
Jeffrey

Similar Messages

What is the exact difference between Database Cloning and Database Refresh?

Hi,
Can anybody tel me the exact difference between Database Cloning and Database Refresh?
I Have some conflicts in these topics.
Thanks
Rajesh

Refresh is what it says, "refresh" . You have a main site which would always have the data being inserted into it. There would be another site which would remain some where else . This site needs to be refreshed with the primary site. So you need to do export from the primary, push it to the secondary site and done!
HTH
Aman....

Error executing a stored procedure from SSIS using the MERGE statement between databases

Good morning,
I'm trying to execute from SSIS a stored procedure that compares the content of two tables on different databases in the same server and updates one of them. To perform this action, I've created a stored procedure in the destination database and I'm
comparing the data between tables with the MERGE statement. When I execute the procedure on the destination database the error that I obtain is:
"Msg 916, Level 14, State 1, Procedure RefreshDestinationTable, Line 13
The server principal "XXXX" is not able to access the database "XXXX" under the current security context."
Some things to take in account:
1. I've created a temporary table on the same destination database to check if the problem was on the MERGE statement and it works fine.
2. I've created the procedure with the option "WITH EXECUTE AS DBO".
I've read that it can be a problem of permissions but I don't know if I'm executing the procedure from SSIS to which user/login I should give permissions and which.
Could you give me some tip to continue investigating how to solve the problem?
Thank you,
Virgilio

Read Erland's article http://www.sommarskog.se/grantperm.html
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Must I put the raster data in Oracle if I want to use them with MapViewer?

I want to publish some raster data with MapViewer, must i put them in oracle, can I could put them in folder?

you must store the images in oracle database. GeoRaster is recommended for the storage. Please post your MapViewer specific questions to the MapViewer forum:
MapViewer

Move Data Between Databases

Dear All,
I have 2 databases one of them in Egypt and the other in USA.
I want to transfer data of one schema between the 2 databases.
I currently use export and import utility to do this action but the size of data is very large so I want an automatic way to do this action.
what can I use to solve this problem?
can I use advanced replication or dataguard or what.
if I use advanced replication data will be transferred through a database link over the internet which will be a very slow operation.
what can I do,please help.

Hello Airtifa,
The main reasons to use a VPN would be
a) dedicated connection, so more reliable
b) no or little need to encrypt data, as data doesn't travel across the public Internet
It should have a positive effect on performance, though you may be suffering from high latency in the network.
What I'm trying to say is:
there is not much to tune in a sqlnet connection of whatever type (database links are just ordinary connections), apart from the Session Data Unit, which should be a multiple of the MTU of the network card (so the card doesn't have to fragment packets).
You are really at the mercy of the (bandwith of the) connection.
If the connection is slow, the link will be slow.
If the connection is fast, the link shouldn't pose extra problems.
Database links aren't slow. Networks can be.
Also not using the array interface in an efficient way can be a killer.
Sybrand Bakker
Senior Oracle DBA

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

Transer data Between database

Goal:
Retrieve a list of every user's AD account and apply it in a customized database's table from SQL server.
Problem:
Is it possible to do it? If yes, how to do it or what method and programmering language do you need to use in order to achieve the requested result.
Information:
- The customized table should retrieve the new data once a day.

Please refer the below link:
(The below is how I implemented INCREMENTAL DL PORTING in one of my project, which might help you.)
http://beyondrelational.com/modules/2/blogs/557/posts/15401/incremental-dl-porting-in-sql-server-querying-ldap-to-get-the-users-belongs-to-a-dl-group-in-sql-ser.aspx
http://www.codeproject.com/Articles/20074/SQL-Server-Active-Directory-Interaction

I´m having some problems with dates intervals. It´s not working well. I inserted the correct date between the right interval but the system refers to incorrect date? What shoul I do?

Mensagem editada por: Mauricio Galletti
It seens that there´s some problem with the specific date of 19/10/2014? Don´t know why? I just remove this date from the interval and the problem gone.
What´s wrong with 19/10/2014?

Hello Galdr,
Welcome to the HP Forums.
I see that after doing some updates, you've lost the use of switchable graphics in your Notebook. I will do my best to help you with this.
You can try is to use the HP Recovery Manager. This will allow you to "recover" the Notebook and reinstall the original drivers. This document: Using Recovery Manager to Restore Software and Drivers (Windows 7), can assist you with that.
Once the drivers are "reverted", then if you wish you can attempt updating.
This first thing I will provide you in regards to updating is this document: Switchable Graphics on Notebooks Configured with Dual AMD GPUs. There is more general information than anything, but you may find it useful.
When going to update you will want to use the website or the HP Support Assistant. These are the recommend ways to update. When using AMD's (or other OEM utilities) they will look for compatible drivers for the component, but not necessarily ones that work with your Notebook. What most likely happened, only one of the two drivers were actually updated.
Here is a link to the newest driver provided by HP: AMD High-Definition (HD) Graphics Driver. Also, here's a link to using the HP Support Assistant: Using HP Support Assistant (Windows 7). (in case you wanted to learn more/use this method).
I hope this is able to help you get back to "state 1", so that you may be able to update correctly and have full functionality of your switchable graphics again. Please let me know how this goes for you. Thank you for posting on the HP Forums.
I worked on behalf of HP.

Transferring Data between Databases with Character Sets UTF08 and US7ASCII

Hi,
I am trying to transfer data from Oracle 10g (character set :UTF08) to Oracle 8i ( character set: US7ASCII). I have tried the transfer using the DBLinks and found that there is no way the data could be transferred from 10g to Oracle 8i.
The last option available is to use staging database for transfer. The staging database would be Oracle 10g only but the character set would be US7ASCII. I am expecting that since the character set is US7ASCII, this would be able to get compatible with Oracle 8i (US7ASCII). Secondly, Transfer from 10g to staging 10g should also work, since staging 10g would support UTF08 character set.
Kindly tell me if this option would work or if there is any other way around.
Thanks
Nitin
Message was edited by:
Nits
Message was edited by:
Nits
Message was edited by:
Nits

You possibly have a fundamental problem,which is more important than any technical issues. If your UTF8 (Unicode) database stores non-english characters you will lose these characters when transferring.
Werner

Copying data between databases

Hi Gurus,
Is there any way to copy data from one DB to another DB, other than COPY command ?
My reqt is this. I want to copy data from one DB to another one periodically (weekly basis). I'm trying to create a USER JOB for this and call a PL/SQL proc in the JOB. As COPY is a SQL/PLUS command, I think I can't use it in a DB procedure. Any help is appreciated. Thanks a lot.

Hi,
Thanks for the reply. It works now.
It was my fault while creating the database link. The SQL*NET version was NET8 and I created the DB link with 'USING t:XXX:XXXX'. So the link was using SQL*NET old version and I was getting ora-6401 (Invalid Driver Designation). Now I recreated the link private DB link) and it works fine.
Thanks for your help.

Calculate/Export data between databases

Hi All,
I am stuck up with the below issue.
I have two databases, one is Pdatabase and other is Edatabase.
I have the below 2 members in both databases
ABC
XYZ
My requirement is I want to calculate the ABC (Pdatabase member) where the value should be the SUM of ABC+XYZ of Edatabase members.
Is there a way to use a report script to get the SUM of ABC+XYZ from Edatabase and load it into my Pdatabase.
Output should be as below:
ABC (member of Pdatabase) = ABC+XYZ (members from Edatabase).
Aany Idea??

I would suggest to go with the calculation and not report script and rules file as such complexity is not required for this requirement.
Yes, you can have a member formula. Just tag the member as dynamic calc and give it a go with location alias and your member combination where the data resides.
If you are going with report script and then a rules file, write a report script in source database with member combination for which ABC and XYZ data resides followed by rules file in target database where you add up these two accounts in ABC.
Regards,
YoGesH

Downloading the master data from database

Is there any standard report or function module or bapi's for downloading the following master data from the database.
1. Masterial master
2. Vendor master
3. Customer master
4. For J1ID
regds
prabhu

hi,
I checked as per my knowledge there is no BAPI for these requirement.
regards
prabhu

XWRITE to move data between databases - what about block creation?

Hi, all.
We have this Essbase script calculating data in one database, and in the end saving data in another database in the same application.
Data transfer is performed by the XWRITE function.
Problem is that the Entity dimension, which is common to both databases, is constantly updated.
Block creation in source is taken care of, but I am a little conserned that data in some cases will not be saved to the target database because there are no active blocks.
I have two questions regarding block creation in this respect:
1) Does the XWRITE command create new blocks in the target database?
2) If I put SET CREATEONMISSINGBLK ON in the script in the source database, will blocks then be created in the target database as well?
By the way: It's version 11.1.2.1
Best regards,
Ann-Margareth

@XWRITE creates blocks at the target. There is no need to use SET CREATENONMISSINGBLK ON on the source database.

How to store the XML data? file or database?

i'm frustrate at it.
If store XML data into files, then when i query any data,how can i search data using relationship as SQL?
But if store XML data into database.How can i transform the xml data to the data table?
Can any one give me an clear example.

XML is perfect for data interchange and readability. However, to make it searchable you should resolve it properly into tables, in accordance of your own choice of model.
1. Investigate the XML files and resolve the model
<Person sex="male">John
<Pet animal="dog">Doggy</Pet>
<Pet animal="cat">Catty</Pet>
</Person>
2. Create the tables in your database, let one or several tables keep the raw xml for retrieval of original xml data.
--- XMLDocument ---
id XML_data
--- Person ---
id XML_Document_id sex name
(foreign key)
--- Pet ---
id Person_id animal name
(foreign key)
3. Resolve data from the xml files and insert it into the database. Do this through your ContentHandler, or from your DOM model.
--- XMLDocument ---
id XML_data
0 <Person>...</Person>
--- Person ---
id XML_Document_id sex name
0 0 male John
--- Pet ---
id Person_id animal name
0 0 dog Doggy
1 0 cat Catty
Gil

Data synchronization between databases

Hi,
This week one of my team accidentally damaged multiple records in one of the production databases, I have a backup of the database prior to what happened. I need to copy the information in a few tables from the beginning of records (about 10 years ago), to the end of August 2014. The newer records should remain as they are.
I was thinking that the best route is to use some sort of tool to synchronize data between databases.
Do you guys have a recommendation for this sort of work?
The databases (production and backup) are ASA 9.
Best regards,
Edgard

Hello Edgard,
If you have any PowerBuilder in-house the Data Pipeline object might help. Otherwise I'd have a look at Squirrel SQL. I know that can communicate between two databases simultaneously but confess I have never tried it.
Paul

Transforming the Raster Data between Databases

Similar Messages

Maybe you are looking for