Transparency and flattener question when sending to publication
Mac OS X 4.11 InDesign CS3
I have a half page ad. A photo takes up roughly the top half, text the bottom half. Inside the photo at the bottom of the photo there is a white headline with a soft shadow. The text in the bottom half of the ad is on a layer above everything else. In the flattener preview the text does not appear to be affected. It shows up as gray. I think this indicates the text is not to be rasterized. If I move the text to the bottom layer on the bottom of the stacking order, the text appears red in the flattener preview. The publication says Acrobat Pro is showing "transparency" problems, specifically the text area. Is it possible they're not reading the transparency flattener display in Acrobat Pro correctly?
>>In the flattener preview the text does not appear to be affected. It shows up as gray. I think this indicates the text is not to be rasterized. If I move the text to the bottom layer on the bottom of the stacking order, the text appears red in the flattener preview.
Exactly correct.
>>The publication says Acrobat Pro is showing "transparency" problems, specifically the text area. Is it possible they're not reading the transparency flattener display in Acrobat Pro correctly?
Acrobat's flattener preview isn't 100% reliable. It sometimes highlights type or vector elements that won't actually be affected. When in doubt, they can place the PDF page in InDesign and view it with ID's flattener preview for a more accurate display.
Similar Messages
-
I'm using AI CS3 on PC. I've been given an EPS file that was apparently created in AI 11 on Mac. It has no preview (at least not that will show up on PC).
I opened the file in AI to save it with a preview. When I do a Save As, AI says:
"When spot colors are used with transparency, changing them to process colors outside of Illustrator can generate unexpected results."
Does this mean I need to change all of the spot colors in the file to CMYK? The file has been used as-is in the past apparently with no repercussions.
Then AI says:
"The document contains artwork that requires flattening."
What should I do? I find the whole business of transparency and flattening confusing.
I COULD just use the original EPS file as-is, but I really hate not having a preview.
FWIW, the EPS will be used in an existing Quark file.
TIA,
MarleneThe first message is just a warning. If you intend to keep the spot color(s) on press, there should be no conversion to process involved. If there is going to be a conversion down the line, you're better off dealing with it within Illustrator. That's what the warning is trying to tell you.
My guess with the second message is that it has to do with the improved transparency flattening options in newer versions of Illustrator. The document uses transparency, and that means flattening is required (because PostScript does not support transparency).
I would just let Illustrator do its thing and save out your new EPS with the Windows-compatible preview. If the file was used in the past without problems, you probably don't have to do anything within Illustrator. However, if you see a lot of transparency features in use, you might want to flatten more aggressively, even if that means further tipping the balance away from vector toward raster and ending up with a larger file.
The preview really won't tell you much (other than position) once in Quark, so make sure you output a proof -- at least to Adobe PDF. Check to make sure each spot color in your Illustrator file goes to its own 'plate' out of Quark.
Recommended reading: http://www.layersmagazine.com/illustrator-render-photoshop.html -
According your advice reset my home screen layout but not yet show apple store application and another question when I any thing brows from apple site by safari then show "this address is invalided" please advice me......
I am using windows Vista and having this problem also (not exactly, but iTunes gives pop-up that "files are in use"). Acting a suggestion from another answer in this thread, I clicked on Computer and selected eject...windows did warn me that the device was in use, but also gave me a CONTINUE button, which I clicked and it was ejected...had to go back to iTunes and eject the iPod there also, but it did eject
-
Why is it when I am downloading my CD's to my computer some of my music gets an explanation mark next to it.
Second question
When I can download music to my iPod some of the music downloads but I can not play it because it has this little round circle in front of it ansd the music is greyed out and not black lettering like the other songs I can play.
Please helpkatenater wrote:
Thank you now how do I get the songs on to the flash drive?
Insert the flash drive into the other computer, and open it so it looks like a window. Highlight the songs you want in his iTunes, and drag them into that window.
That will cause them to copy onto the flash drive, and will not affect his library.
If you normally run iTunes in full-screen mode, make it smaller so that you can do the drag.
Then insert the flash drive into your computer. Find your Automatically Add to iTunes folder (it is inside the iTunes media folder) and drag the songs into it. -
Apple Mail and gmail bug when sending attachment?
Hi,
And now for my own Mail question. Wondering if others have run into this bug?
Mac OS 10.5 MacBook Pro.
There seems to be a bug when trying to send Mail with an attachment (via a gmail account).
Over and over, Mail just hangs there.
But it works when:
1. Using Mail, the same email can be sent when I Remove the attachment.
2. Skipping Mail, and using gmail itself, the email and attachment are sent within seconds.
2. Email with attachment can also be sent from another email service (such as Earthlink).
Only when I am using Apple Mail, sending via gmail, With an attachment, is there a hitch.
Thanks again for your attention,
- RossPerhaps this problem is confined to Mail 3.0 and later, and Leopard. I cannot send attachments using gmail as the smtp server. I can log in to my gmail account, download an attachment, and send, with no problem as Ross has experienced. I get an eternal hang when trying to send the same message with an attachment from Mail. Any solutions yet? Thanks!
-
Transparency and colour question
Hello - I would like to mix colour in Flash using
transparency to create something like
this
(no interactivity required):
If I create Cyan, Magenta and Yellow movie clips and change
the Alpha transparency, obviously the whole colour becomes lighter
(and the layered colours don't merge well). Is there any simple way
to do this, preferably using transparency, although I am prepared
to accept this is not possible. I have tried using masks, but I may
be overcomplicating things and am unable to get my head around what
is required. I found a movie showing that
it
is doable.
Any ideas?Hello, you can achieve that by utilizing the blend mode in
Flash 8. If you create movie clips from the 3 items then apply a
multiply blend to each, you'll get what you're looking for. See my
example
here. -
2 new and strange things when sending attachments
Hello,
I can't isolate what caused any change but suddenly on my computer at my office, when I try to add an attachment, with no body copy, it will not show. I am forced to type at least 1 letter in the body for the attachment to appear when I upload it, then I remove the typed letter.
Coincidentally, if I add an attachment to an existing body of copy, the attachment only shows up at the end of the letter. Previously, I could insert an attachment where ever I placed the cursor. No more.
More oddly, this does not happen at all on my home computer which has the same OS System and mail.
Have I accidentally hit a preference and changed my email? Please let me know if this sounds familiar. Or please inform me how to rebuild my mail settings.
Thank you.
AlI just printed your front panel on a HP Color Laserjet 4500 and got an accurate printout. My Deskjet 932 ink jet do okay except for the colors. So much is dependent on the printer and it's driver. If it's a low res ink jet and you've got a high res screen, then compromises have to made in translating that high resolution image to a low resolution output. There are printer options (standard, postscript, bitmap) that you can experiment with and I'm sure your printer has settings that can be adjusted as well. You could also look for an updated printer dirver or try a different printer.
-
FaceTime connects ok and rings out when sending call but no ringing sound when receiving incoming calls
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
Help. My sounds are turned on and volume is up but I get no keyboard click while typing and no swoosh when sending mail.
1. Double-click the Home button and swipe the Task Bar (at bottom) to the right. Check volume and mute settings.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo -
When I add a watermark and flatten the transparency, it duplicates the file within the file. (a 105 pg file becomes 210pgs)
After doing so, use the Save As command to save the file under a new name.
This should optimize it and reduce the file's size, sometimes dramatically. -
The send and spell check options are next to each other. I can not tell you how many times I hit the send button be accident. When sending, and question of 'Are you sure you want to send now?', should be asked.
ThanksActually, unless something has changed, you can set Thunderbird to run an automatic spell check when you click Send. That might be your best workaround.
Tools menu > Options > Composition panel > Spelling mini-tab
(You can display the classic menu bar by tapping the Alt key)
It might also be possible to customize the toolbar, but I think this might be safer.
Regarding a general confirmation for sending, I noticed some add-ons for that, but I don't have any personal recommendations. -
Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact
The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names. -
can anybody help with the question below?
how to reset your secret question, when you have forgot the answer. And how to change the email where the reset confirmation will be send towards?You won't be able to change your rescue email address until you can answer your questions, if you don't have access to your current rescue account then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use steps 1 to 7 half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
I forgot the answers to my questions when I try and send an email to reset it the email never comes
I forgot the answers to my questions when I try and send an email to reset it the email never comes. Help please.
A rescue email address is different than an alternate email address.
Contact iTunes Support online at: http://apple.com/emea/support/itunes/contact.html (select Account Security as your help topic)
or
by phone: Apple Support Numbers -
When you forget your security questions and they ask to send an email to another account to recover the security questions ...how do you change that email?
You won't be able to change your rescue email address until you can answer your questions, you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/en-us/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then update your rescue email address for potential future use : http://support.apple.com/en-us/HT201356
Or if it's available in your country you could change to 2-step verification : http://support.apple.com/en-gb/HT5570
Maybe you are looking for
-
Small and big album art not matching
I bought an 5G iPod only ten days or so ago, and I have recently finished to transfer all my song database. I'm seeing something strange happens with the album art. Sometimes I take a look on the screen, and it correctly displays the song info: artis
-
How do you create a database link in Forms9i
I am writting and application that is to connect to multiple databases and do given task, but the triggers I assign to items only work in the database that you connect to for forms to run. How do you create a database link in Forms9i? Thank you in ad
-
hello have buy usb etxrme (64 gb) a year ago.is NTFS by default?i can't remember if i convert it from FAT 32.i have 3 questions:1)why when i formating via windows i see two options?(NTFS and exFAT) in other usb
-
I am not sure if it is user error or what. I have a file in InDesign CS4 that I have exported into a JPEG. I then go into CS Review through Adobe.com and use the web based client to upload the JPEG images. I am able to create the review and start
-
Its listed as preparing to ship , or something similar