Transport Release Error - Error in check before release, for details see longtext

Hi there,
I am halfway through applying some HR Patches (B0).
We have made both SPDD/SPAU changes and the HR patch has gone in DEV ok.
We have released the SPDD transport ok.
But when we try to release the SPAU transport we get the error below:
Anyone help??

Hi Andy,
Refer:
1484093 - Transport with service interfaces can't be released
This has same error message and problem stated by you.
Divyanshu

Similar Messages

  • An unexpected error occurred processing your request. Check the logs for details and correct the problem.

    Hi All,
    I am configuring RSS Viewer webpart to SP 2013. 
    But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
    I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
    So, in order to resolve this i put the following set of code in web.config and save the file
    <system.net>
        <defaultProxy>
          <proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />      
        </defaultProxy>
      </system.net>
    But, still i am getting the error. 
    What could be the problem now. 
    Any help is much appreciated. 
    Thanks,
    Rakesh

    Hi Rakesh,
    According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
    The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
    not be able to authenticate the user through the proxy. More information, please refer to the link:
    http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
    Also see:
    http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • An Error occured while processing this page. check the log for details

    Hi ,
    when i open an browser http://localhost:8300/HyperionPlanning/AppWizard.jsp
    i get an error stating that :: An error occured while processing this page. check
    the log for details
    i am not aware where to look the log files.
    second issue. on anothor desktop i am able to login but when i create an sample application it moves forward until finish and takes lot of time and gives me an same error as above .
    please help me out ASAP iam tired uninstalling and reinstalling the products.
    please mail me at [email protected]....
    thanks and regards
    RED

    Hi,
    If you are running planning as a service could you stop the service, then run planning server from the start menu.
    If you try and log in again it should produce some error messages.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Internal error has occurred. Check log files for details.

    While configuring software library on OEM 11g grid control, i get the error as Internal error has occurred. Check log files for details.
    On checking emoms.trc i see the following error
    2011-08-08 22:15:13,298 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
    ion checkAllSoftwareLibLocs.216 - AdminUtil:checkAllSoftwareLibLocs: No software libra
    ry locations configured.
    2011-08-08 22:15:13,320 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
    ion handleValidateLocsSoftwareLib.1754 - AdminController:handleValidateLocsSoftwareLib
    : ComponentException while fetching all software library locations from repostiory.
    oracle.sysman.emgc.provision.component.ComponentException: Software Library location i
    s not configured.
    at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
    cs(AdminUtil.java:218)
    at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
    cs(AdminUtil.java:146)
    at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleVali
    dateLocsSoftwareLib(AdminController.java:1746)
    at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleEven
    t(AdminController.java:397)
    at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
    at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
    handleRequest(AbstractProvisioningPageHandler.java:235)
    at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
    at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
    at oracle.sysman.eml.app.Console.doGet(Console.java:352)
    at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
    ecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
    er.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
    eExceptionFilter.java:58)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
    a:41)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
    va:122)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
    2)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
    java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
    WebAppServletContext.java:3592)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
    ct.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
    Context.java:2202)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
    .java:2108)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
    32)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    2011-08-08 22:24:58,397 [EMUI_22_24_58_/console/provision/admin/edit_sw_lib_dir_config
    uration] ERROR svlt.PageHandler handleRequest.640 - java.lang.NoClassDefFoundError: Co
    uld not initialize class oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps
    java.lang.NoClassDefFoundError: Could not initialize class oracle.sysman.oii.oiip.osd.
    unix.OiipuUnixOps
    at oracle.sysman.oii.oiip.oiipg.OiipgFileSystem.getVolumeName(OiipgFileSystem.
    java:615)
    at oracle.sysman.eml.swlib.bitstore.FileBitStore.getFreeSpaceInKB(FileBitStore
    .java:1044)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.getFreeSpaceInKB(LibraryServiceI
    mpl.java:1572)
    at oracle.sysman.emgc.provision.impl.component.SoftwareLibraryImpl.getFreeSpac
    eInKB(SoftwareLibraryImpl.java:2582)
    at oracle.sysman.emgc.provision.impl.component.ComponentManagerImpl.getFreeSpa
    ceInKB(ComponentManagerImpl.java:664)
    at oracle.sysman.emgc.provision.ui.model.admin.SoftwareLibContext$OkButton.han
    dleClickEvent(SoftwareLibContext.java:860)
    at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
    handleEvent(AbstractProvisioningPageHandler.java:427)
    at oracle.sysman.emgc.provision.ui.controller.admin.SoftwareLibController.hand
    leEvent(SoftwareLibController.java:53)
    at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
    at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
    handleRequest(AbstractProvisioningPageHandler.java:235)
    at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
    at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
    at oracle.sysman.eml.app.Console.doGet(Console.java:352)
    at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
    ecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
    er.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
    eExceptionFilter.java:58)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
    a:41)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
    va:122)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
    2)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
    java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
    WebAppServletContext.java:3592)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
    ct.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
    Context.java:2202)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
    .java:2108)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
    32)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Hi, I followed all the steps correctly and also the owner of the directory is correct.
    But i have not installed the patches which is listed at the bottom of the link page.
    I had done this on RHEl and i had no problem but now i am getting problem on solaris.

  • Error: check your ApJServLogFile for details

    When I start the apachectl , error : check your ApJServLogFile for details
    Pls help..thanks

    When I start the apachectl , error : check your ApJServLogFile for details
    Pls help..thanks

  • An Error Occurred While Processing This Page. Check The Log For Details. Pl

    Hi,
    I started getting this error while opening the app
    Application was working fine. All of a sudden this error came while opening the application.
    " An Error Occurred While Processing This Page. Check The Log For Details. Please Close The Current Tab and Open Application Again."
    I cannot see calc manger rules for this means in calc manager I am not able to see this app.
    Also, in logs I see
    java.lang.RuntimeException: Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    I am not able to get why this is occurring.
    Any help?

    If it is not important then you can try deleting and recreating the application, if you want to be sure after you delete the application then drop/recreate the Oracle schema.
    If you have problems deleting the application and have to remove it manually the following post might be helpful Planning 11.1.1.3 - Manually Delete a Classic Application
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • Failed to sync with user provisioning. Check Planning log for details

    hey everyone,
    we just did a password update for our hyperion planning application owner account. and now when i try to login to hyperion planning, i get the following error message:
    Failed to sync with user provisioning. Check Planning log for details.
    I can still login to shared services and workspace with the same application owner account.
    i also tested and verified that I can login to Essbase via Excel using this application owner acct. after i changed the password, i have stop and restarted the weblogic web services after I updated the password.
    because i kept getting the error, i have reverted back the password to the original one... but i am still getting the same error message.
    btw, we are using a solaris server running WebLogic9, Hyperion System 9. any help or tips would be appreciated.. thx.

    Hi,
    Have you updated the datasources for each of the planning applications, you will need to update the password and probably recycle planning app server.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Random check before releasing price updation in costing run

    Hi all,
    Before releasing the price with standard cost estimate how we have to check the correctness of prices & costs of materials.
    Please suggest any standard SAP solution is available or any other way to check correctness of cost estimate & prices of materials.
    thanks & regards,
    ramesh B

    If you are doing the costing run through ck40n then you can see the error message if any generated against the marking. If there is no items for which there is any error, then u can release the cost.
    Next you can take a sample checkup of the Material Master Costing 2 tab to see whether there is any amount entered under the future tab with the posting period as the period for which the costing is done.
    Regards,
    Vaskar

  • When i try to down load a book from the library i get a error that reads check activation only for overdrive not for 3m cloud

    i am having trouble downloading books from the library i get a check activation error when using overdrive

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • Error license file exception (check the logfile for details). Features Is Locked To A Different host (-9,30035)

    Plz Help
    note: the instalation is over ESX and VMware 

    Hi Juan,
    This usually means that the license mac for virtual builds or the Publisher
    mac for MCS builds does not match the original license. If something was entered
    incorrectly when you registered the PAK you need to contact
    [email protected]
    To have the new license re-hosted with the proper information
    Cheers!
    Rob
    "May your heart always be joyful
    May your song always be sung" - Bob Dylan

  • Error when the link is clicked for detail page

    Hello I am creating pages using MySql and PHP with dream weaver. I created my master record set and detail page. the master record set works b but when you click the link to bring up the details page I get this error
    "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'name = 'Brandon' LIMIT 0, 10' at line 1"
    Any help with guidance on trouble shooting error would be greatly appreciated.
    David

    =====================================================Master page=============================================================
    <?php require_once('Connections/Onantional.php'); ?>
    <?php
    if (!function_exists("GetSQLValueString")) {
    function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
      $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
      $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
      switch ($theType) {
        case "text":
          $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
          break;   
        case "long":
        case "int":
          $theValue = ($theValue != "") ? intval($theValue) : "NULL";
          break;
        case "double":
          $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
          break;
        case "date":
          $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
          break;
        case "defined":
          $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
          break;
      return $theValue;
    $currentPage = $_SERVER["PHP_SELF"];
    $maxRows_Recordset1 = 10;
    $pageNum_Recordset1 = 0;
    if (isset($_GET['pageNum_Recordset1'])) {
      $pageNum_Recordset1 = $_GET['pageNum_Recordset1'];
    $startRow_Recordset1 = $pageNum_Recordset1 * $maxRows_Recordset1;
    mysql_select_db($database_Onantional, $Onantional);
    $query_Recordset1 = "SELECT * FROM Roster";
    $query_limit_Recordset1 = sprintf("%s LIMIT %d, %d", $query_Recordset1, $startRow_Recordset1, $maxRows_Recordset1);
    $Recordset1 = mysql_query($query_limit_Recordset1, $Onantional) or die(mysql_error());
    $row_Recordset1 = mysql_fetch_assoc($Recordset1);
    if (isset($_GET['totalRows_Recordset1'])) {
      $totalRows_Recordset1 = $_GET['totalRows_Recordset1'];
    } else {
      $all_Recordset1 = mysql_query($query_Recordset1);
      $totalRows_Recordset1 = mysql_num_rows($all_Recordset1);
    $totalPages_Recordset1 = ceil($totalRows_Recordset1/$maxRows_Recordset1)-1;
    $queryString_Recordset1 = "";
    if (!empty($_SERVER['QUERY_STRING'])) {
      $params = explode("&", $_SERVER['QUERY_STRING']);
      $newParams = array();
      foreach ($params as $param) {
        if (stristr($param, "pageNum_Recordset1") == false &&
            stristr($param, "totalRows_Recordset1") == false) {
          array_push($newParams, $param);
      if (count($newParams) != 0) {
        $queryString_Recordset1 = "&" . htmlentities(implode("&", $newParams));
    $queryString_Recordset1 = sprintf("&totalRows_Recordset1=%d%s", $totalRows_Recordset1, $queryString_Recordset1);
    ?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    </head>
    <body>
    <table border="1" align="center">
      <tr>
        <td>First name</td>
        <td>Last Name</td>
        <td>Conference</td>
        <td>email</td>
      </tr>
      <?php do { ?>
        <tr>
          <td><a href="details.php?recordID=<?php echo $row_Recordset1['First name']; ?>"> <?php echo $row_Recordset1['First name']; ?>  </a> </td>
          <td><?php echo $row_Recordset1['Last Name']; ?>  </td>
          <td><?php echo $row_Recordset1['Conference']; ?>  </td>
          <td><?php echo $row_Recordset1['email']; ?>  </td>
        </tr>
        <?php } while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)); ?>
    </table>
    <br />
    <table border="0">
      <tr>
        <td><?php if ($pageNum_Recordset1 > 0) { // Show if not first page ?>
              <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, 0, $queryString_Recordset1); ?>">First</a>
              <?php } // Show if not first page ?>
        </td>
        <td><?php if ($pageNum_Recordset1 > 0) { // Show if not first page ?>
              <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, max(0, $pageNum_Recordset1 - 1), $queryString_Recordset1); ?>">Previous</a>
              <?php } // Show if not first page ?>
        </td>
        <td><?php if ($pageNum_Recordset1 < $totalPages_Recordset1) { // Show if not last page ?>
              <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, min($totalPages_Recordset1, $pageNum_Recordset1 + 1), $queryString_Recordset1); ?>">Next</a>
              <?php } // Show if not last page ?>
        </td>
        <td><?php if ($pageNum_Recordset1 < $totalPages_Recordset1) { // Show if not last page ?>
              <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, $totalPages_Recordset1, $queryString_Recordset1); ?>">Last</a>
              <?php } // Show if not last page ?>
        </td>
      </tr>
    </table>
    Records <?php echo ($startRow_Recordset1 + 1) ?> to <?php echo min($startRow_Recordset1 + $maxRows_Recordset1, $totalRows_Recordset1) ?> of <?php echo $totalRows_Recordset1 ?>
    </body>
    </html>
    <?php
    mysql_free_result($Recordset1);
    ?>
    =====================================================end master ========================================================
    ========================================================details page=========================================================
    <?php require_once('Connections/Onantional.php'); ?><?php
    if (!function_exists("GetSQLValueString")) {
    function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
      $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
      $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
      switch ($theType) {
        case "text":
          $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
          break;   
        case "long":
        case "int":
          $theValue = ($theValue != "") ? intval($theValue) : "NULL";
          break;
        case "double":
          $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
          break;
        case "date":
          $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
          break;
        case "defined":
          $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
          break;
      return $theValue;
    $maxRows_DetailRS1 = 10;
    $pageNum_DetailRS1 = 0;
    if (isset($_GET['pageNum_DetailRS1'])) {
      $pageNum_DetailRS1 = $_GET['pageNum_DetailRS1'];
    $startRow_DetailRS1 = $pageNum_DetailRS1 * $maxRows_DetailRS1;
    $colname_DetailRS1 = "-1";
    if (isset($_GET['recordID'])) {
      $colname_DetailRS1 = $_GET['recordID'];
    mysql_select_db($database_Onantional, $Onantional);
    $query_DetailRS1 = sprintf("SELECT * FROM Roster WHERE First name = %s", GetSQLValueString($colname_DetailRS1, "text"));
    $query_limit_DetailRS1 = sprintf("%s LIMIT %d, %d", $query_DetailRS1, $startRow_DetailRS1, $maxRows_DetailRS1);
    $DetailRS1 = mysql_query($query_limit_DetailRS1, $Onantional) or die(mysql_error());
    $row_DetailRS1 = mysql_fetch_assoc($DetailRS1);
    if (isset($_GET['totalRows_DetailRS1'])) {
      $totalRows_DetailRS1 = $_GET['totalRows_DetailRS1'];
    } else {
      $all_DetailRS1 = mysql_query($query_DetailRS1);
      $totalRows_DetailRS1 = mysql_num_rows($all_DetailRS1);
    $totalPages_DetailRS1 = ceil($totalRows_DetailRS1/$maxRows_DetailRS1)-1;
    ?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    </head>
    <body>
    <table border="1" align="center">
      <tr>
        <td>First name</td>
        <td><?php echo $row_DetailRS1['First name']; ?> </td>
      </tr>
      <tr>
        <td>Last Name</td>
        <td><?php echo $row_DetailRS1['Last Name']; ?> </td>
      </tr>
      <tr>
        <td>Conference</td>
        <td><?php echo $row_DetailRS1['Conference']; ?> </td>
      </tr>
      <tr>
        <td>email</td>
        <td><?php echo $row_DetailRS1['email']; ?> </td>
      </tr>
    </table>
    </body>
    </html><?php
    mysql_free_result($DetailRS1);
    ?>

  • Creative infra remote (lil black one)- error messages upon installation. Read for details... He

    Upon installing the creative infra remote software i get a "there is no disc in the dri've" error. Ive tried every way of installing i can think of and cant get it to do squat. neat little remote, hope i can get it to work. yall heard anything?

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Error in License check for IDES ECC 6.0

    Hi All,
    I am unable to log into our 800 client since yesterday, i am getting the foloowing error while trying to log in
    "Logon not possible (error in license check)"
    Before this we were getting a warning message that the license will expire in 10 days, so i deleted the old license and then it was ok for rest of the day.
    But today we are not able to log in at all.
    The new license that we applied at service market place is active and still we have this problem.
    Can anyone please tell me how to solve this problem.
    Its very urgent as our client has to go for their level two training.
    Looking forward for a quick reply.
    Thanks in advance
    hunky

    Hi,
    If you keep getting license issues check that the hardware key, validity date, system name, installation number etc.. are right.
    If you can't access the system is because theres something wrong with the license, I suggest you to request a new license and make sure all the details are spot on... then install the license. If this doesn't fix your problem... open an OSS to SAP.
    Regards
    Juan
    Please reward with points if helpful

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

Maybe you are looking for

  • How do I migrate bookmarks from one HD to another?

    Windows XP became corrupted (?). It was cheaper to install another hard drive, and install windows on the new drive (backing up the original HD would cost more than the new HD did....) The old drive is easily accessed. How do I migrate Firefox bookma

  • From prepaid to postpaid - will I retain my unlimited data?

    Hello all, I've been a Verizon Wireless customer for around 8 or 9 months. When I first started out, I bought a used smartphone (BB Curve 8530) that I knew for a fact was eligible for activation on a prepaid plan. I've been satisfied with my service

  • What's this thing called?

    I want to buy this "thing", but I've no idea what it's called! I've tried Googling any number of search terms, but no luck:) It's basically similar to a surge protector, but it retains a few minutes charge, so in the event of a power cut your compute

  • I can't update itune on my laptop.

    Everytime Itunes has new update, I have to uninstall old version Itunes on my laptop then download new version and install. I can't able to update new version Itunes without uninstalling the old one.

  • Activation problem of iphone5 after reset

    after reseting my iphone 5 i tried to activate it but its telling me repeatedly to try again server not availabdle