Transport request and deletion of an object

Hi Folks,
1.Will it ask for a transport request when a object is deleted from
the Development.
2.If it asks, then whether this transport request when transported to
quality and production will it delete the same object from Quality and
production too?
3.What is the best way to delete an object having an transport request.
4.Anyother way to make an object null and void.
Thanks,
K.Kiran.

Hi,
1.Will it ask for a transport request when a object is deleted from
the Development.
YES this is needed so that the objects are deleted from all the systems in the ladnscape. so that when you release thisrequest the objects gets deleted from the target system
2.If it asks, then whether this transport request when transported to
quality and production will it delete the same object from Quality and
production too?
YES
3.What is the best way to delete an object having an transport request.
If the object exist in your quality and production the best way is to use the transport request, if that does not exist you can ask your basis guy to delete it.
4.Anyother way to make an object null and void.
Ask the basis guy to delete it but to keep track its always better to delete it using the Transport reuqest.
Regards,
Sesh

Similar Messages

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

Transport request containing deleted entries.

Hello,
I am facing an issue regarding transport handling and TADIR.
Steps:
1. I create few objects which are added to a transport request.
2. Later I delete these objects.
3. I release the transport request. It works fine. The objects CAN be seen in the Transport request.
4. I create a new transport request and call the Function Module TRINT_COPY_COMM to copy the
old transport into the new one(All objects can be seen in this new transport request).
5. When I try to release the new transport request. I get an error.
The issue is that those entries which were deleted are now not existing in TADIR. Hence a lock on those entries could not be obtained and release fails. I am able to proceed by manually deleting these entries from the transport.
Let me know if there exists some function module
1. To copy the transport request into another but while copying it removes the deleted entries.
or
2. Some function module to find which objects from the transport request are TADIR relevant, then another one to check
if its in TADIR, and one to delete entries from transport request.
Regards,
Bikash.

Hi,
It is not problem it normal behavior of TMS. It will not effect on any of but you should delete such type of object manually from request.
Goto transaction se01 and expand your request and delete object from the request which all ready deleted.
Then only you can release the request.

Regarding Transport Request and related program names

Hi All,
I have a issue with picking Program Names from Transport Request names.
I am using E071 table to pick up all the Objects/Program Names based on TR's.
But for the TR's which are having D-Modifiable status i am not getting any entries from E071 table.
Can anybody give me alternate table which will give us All Program names under a TR based on TR for which status is D.
Thanks in advance.
Thanks,
Deep.

Hi Deep,
When the transport request is not released (i.e it is in Modifiable status) all the objects are linked to the tasks under the transport request. So if you are trying to get all the objects in the transport request(in modifiable status), first you have to get all the tasks under the transport request and get the objects under each task from E071 table.
You can get the taskes under the transport request by selecting from E070 table
select * from E070 where STRKORR = <your transport request numer>
then you can get all the objects for each task .
- Kalyan

Transport Request and Cross-Application techniques

Respected Members,
I want to know what is the difference between the transporting request and Cross-Application Technique( eg ALE)
Generally suppose you have made some object in development server and then a transport request will be created and through transporting to the production server same data can be transported to production server.
Same thing we do with ALE also that we can transport the data from one server to another server or from one client to another client.
THen what will be the difference between the transport objects and Cross-Application techniques.
Clear this picture by giving your valuable answers.
Thanks a Lot.
Manish

Hi Manish,
The applications transferred through Transport Requests and the data passed through ALE or EDI are completely different technologies.
The Transport requests transfer the programs and the configurations that you do within the development Server or rather the SAP system to the Production Server and then you execute them to get the desired result.
On the other hand,ALE(Application Linking and Enabling) or EDI(Electronic Data Transfer) transfers the data or rather business documents(for example vendor payments or making the payme nt through cheques) from one system to another system,i.e different Landscapes.
If suppose you want to transfer the data from one SAP system to another SAP system which are in completely different landscapes,then you use ALE and in case you transfer it from one SAP system to another Non-SAP system or vice-versa,you use EDI.
Moreover,you cannot view the coding or the configuration part in case of ALE or EDI whereas you can view the same in terms of Transport requests.
The landscape means all the clients within one SAP system.
I hope I have made it In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.clear.

Transport request no for the abap object

Hi experts,
                  I want to know the transport request numbers for the abap objects. Can anybody tell me the procedure of how to know the transport request number?
My approach : I want the transport request number for the function module.Open the functional module. go to Object Directory Entry and click on Lock Overview.
it is displaying the 1.Request   2.User   3.Task/request   4.Object.      What is the main difference between Request and Task/request.
For some programs it is not displaying the request number. Instead it is displaying the request locks.
Thanks and regards.
Murali Krishna T

Hi tajuddin,
                     Thanks for your prompt reply. Problem solved.
Also please make me clear --- In object directory entry ---> lock overview, I want to know the difference between the Request and Task/request.

What's the difference between transport request and change request

Hi, I am reading TMS part of TADM12-1 now, and confused about two terms mentioned in this book, transport request and change request.
Is there any difference with them? Please advise. Thanks
James

In the context of course tadm12 transport request = change request

How to create a deletion transport request without deleting the object.

Hi Experts,
I got a very strange requirement in which i want to delete a object from QA envirement. One way to delete it is delete the object in developement and save it in a transport request. And transport that request to QA.
But can't delete the object from Dev environment. So is there any other way by which i can do this.
Thanks
Yogesh Gupta

Hi,
You need not worry about deleting the objects in QA now.
Have the set of objects which you will not be tranporting to PROD.
After your project is live and during support before handholding to the customer, clean your system DEV,QUA.
Reward Points if Useful.
Thanks,
Anita

Transport request and objects

hi experts,
can anybody tellme how u transport requets and how u transport objects.

hi,
You can check all the requests in SE01 or STMS.
You should know how STMS works at least.
In STMS you normally select the system (DEV/QA/PRD) for which you want to look at transport requests. After selecting the relevant system, you normally get to see the 'IMPORT QUEUE'. This means the following:
(make sure you press the REFRESH button first)
1) transport requests in the import queue of your QA system are not imported yet. (imported ones, you can find back via the menu by selecting the 'IMPORT HISTORY'.
So if you want to find out about requests that are already on your QA system, but NOT on your productive system, you just select PRD , and look at your import queue for this particular system. These transports that you see there are ALREADY imported on QA , but not yet on the production system.
Case Closed I would say, not??
The only thing that might make my statement 'uncertain' is if the company has a specific 'approval procedure'. For example, suppose you have released a new development on your development system. An automatic job imports every hour all released transports from your development system into your QA system. (ofcourse you can always manually import a request).
Now after an hour the request is automatically imported on your QA system and you can do the necessary Unit and Integration testing.
Now, under normal circumstances, after import of your request on the QA system, in STMS it will automatically appear in the import list of the production system.
In case of the approval procedure however, you first might need to select tested requests, select them, approve them (via an approval button ) and run a job to release all approved requests. Only after they are released by the job, they will appear in the Import Queue of the production system.
But ok, I only saw this in practice at one customer so far...but just that you know
regs,
hema.

Can we create Transport request for deleting a package?

Hi all,
We have few customised programs and tables developed in a package. Normally we create a transport request, include the objects for this package, then generate the FTP files and send it to user. Now the user wants us to create a FTP files for deletiing the package. Can this be possible without effecting the package in our system?( For this we have only dev sys)
Thanks and Regards,
Sravanthi

>
sravanthi konda wrote:
> Yes, I too cannot understand. If it is to delete a single program or 2 programs it is posible to create a TR excluding that program, but I don't understand how to delete whole package. Is there any possibility to do this?
You have to ask the user to delete the package locally. Moreover please educate him about the CTS mechanism in SAP, i don't think ABAPers are here to hack the SAP system

Whats the diff between copying a Transport request and Importing a request?

Hi gurus,
Can some one explain me the difference between copying a transport request between clients and importing transport request between clients? say for eg: difference between copying a transport request containing a datasource being copied from client 100 to client 200 and importing the same request from client 100 to client 200?... When do we follow such scenario's?
thanks.
kishore

Hi Kishore,
A request copy applies only for customizing (client dependent) objects.
A request tracks object modifications since its last transport. if the object is created in source system and included in a transport request, when it is transported to another system, it will create the object in target system. Then if you modify the object, it will include modifications since last transport.
As i said, a request copy is only valid for customizing objects. This is entries in tables, you will see that you have two kind of requests, customizing and workbench. Workbench objects are client independent, so request copy doesn't applies.
it's very important to keep the order of requests when you transport and also not to delete requests in any system.
Hope this helps (and hope it is clear, if you have any doubt, just ask!).
Regards,
Diego

Program attached to wrong transport request and sent to QA, now what?

hi, while doing a program bymistake i have taken a request id of another program which has been send to quality
now my running program has been attach to that program please please help me out iam in great trouble...............
how to remove that from version management...............
Thanks
Edited by: Thomas Zloch on Jan 5, 2012 - subject enhanced

Hi,
If you want to retrieve the older version of that program in quality, then you need to go to -->version management and retrieve the older version of that program in development system. Capture it in a new transport and transport it to quality.
Or If it is a new report and you don't want that to be in quality then delete the new report and capture it in a new Transport and transport it to quality.
You can use this report RS_DELETE_KEY_IN_TRANSPORT2 in se38 to delete the objects from transport requests.
Regards,
Selva M
Edited by: Selva M on Jan 5, 2012 7:26 PM
Edited by: Selva M on Jan 5, 2012 7:32 PM

Customizing Transport Request Assignment process to Local Objects

Hi,
I am developing custom report, which will find out all dependent and local objects for given transport request. When we select the local objects and save, it has to show standard saving process screens...like package and TR screens.
I am trying the above problem using 'TRINT_TADIR_POPUP', 'TRINT_ORDER_CHOICE' and 'TRINT_APPEND_TO_COMM_ARRAYS' function module, but this function module 'TRINT_APPEND_TO_COMM_ARRAYS' giving exception ob_check_obj_error.
So, please let me know anyone have solution for assigning local objects to package and TR through customization (Programmatically).
Thanks,
Param..:-)

Hi Sheetal,
Thanks for the reply.
For this function module ADD_TO_PACKAGE, I can't import package name or Transport Request.
I need to have a save screen's, which generally we get during saving of any R/3 Object.
Thanks,
Param...:-)

Creating Transport request for a $temp saved object

Hi,
The smartform being created and its associated driver program is actually in a $temp directory.
How can I assign a new TR ato it as well as to its Porgram ?
Thanks.
Regards,
Tushar.

Hi Tushar,
For Smartforms
Use T/code "SMARTFORMS"--> Enetr formname > Goto> Object Directory Entry --> Change $TMP with your package and Save then system will Give you the CTS no.
For Program-->
USe T/code SE38--> Enter program name > select Attributes> Then press Change button--> Change $TMP with your package then system prompts you a transport request no.
Lanka

Transport request and Message class?

Hi,
How to create a transport request for the changes I made in a content of the table (eg: T100 ) so that the changes can reflect in all clients. and please mention the name of message class for the object BUS2121 or else name the message class for the messages that has been used in shopping cart email templates.
regards,
George.

Hi,
The message for SC is BBP_PD, you will find in SE91 txn. and you would need to know the message number to customize it, you can do it in SPRO-Cross-application settings-> Message control, and then select BUS2121 and add new entry to change it from standard.
Award Pointsif helps.
Thanks.

Transport request and deletion of an object

Similar Messages

Maybe you are looking for