Transport Request as Local File
Dear all,
How can i export the transport request as local file and import it into another system??
Regards,
Kit
Hi Kit
Please access the /usr/sap/trans/bin directory and execute the command ->
tp addtobuffer
then i guess STMS can be used to import the request, please give it a try and let me know.
Please check the blog
<a href="/people/ted.teng/blog/2005/12/29/use-sql2005-to-connect-and-present-sap-on-sharepoint-business-scorecard-manager-150-part-iii:///people/ted.teng/blog/2005/12/29/use-sql2005-to-connect-and-present-sap-on-sharepoint-business-scorecard-manager-150-part-iii
Please check the comments the detailed procedure is given.
Regards,
Arun
Similar Messages
-
Inconsistant transport requests after local client copy
Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
AndreasHello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim -
Export Transport Request to a File
Hi Everyone,
I have a package that contains number of programs and tables and I would like to ship this package to a customer.
I need some help in creating a new transport request that will allow me to export this transport as a file that I can give to
the customer so that they import the transport in easy and fast way.
Thanks
MisbahI run this transaction to perform a test (RSTPTEST ):
Check Transport Tool 16.12.2009 14:27:47
|
--- NSP System NSP
|
|-- tp Interface
| |
| |-----Host Name thinkpad
| |-----Version 1.80
| |-----Transport Directory \\thinkpad\sapmnt\trans
| ------Logging On (TPLOG contains 1760 entries)
|
|-- Transport Profile
| |
| |-----Path \\thinkpad\sapmnt\trans\bin\TP_DOMAIN_..
| |-----Profile Cannot read tp profile
| ------Version tp profile has an invalid format
|
|-- RFC Destination
| |
| |-----Destination CALLTP_WindowsNT
| |-----tp Path C:\SAP\NSP\SYS\exe\run\tp.EXE
| |-----tp Executable Size: 5.709.824 bytes
| ------RFC Ping timeout during allocate / CPIC-CALL: '..
|
--- tp Call
|
|-----RFC Link timeout during allocate / CPIC-CALL: '..
|-----tp Version
|-----DB Connect
------Offline Call timeout during allocate / CPIC-CALL: '..
Edited by: Misbah on Dec 16, 2009 9:31 PM -
How to change Transport request into local object $temp.?
Hi experts,
I would like to know to how to change a Transport request into and local object.
I have already assigned Infopackage to TR, but its not required. We dont want this infopackage to be transported to prod. So how can i change that as a local object.
Please put our valuable inputs.
Thanks in advance.
Regards,
DubbuGo To that Infopackage ,
Extras Menu----Object catalog entry. There you can change package name.
or
In SE09---Under the transport requests you can search for the infopackage name and delete from the TR.
Regards,
Srikanth
Edited by: srikanth on Feb 19, 2009 2:26 PM
Edited by: srikanth on Feb 19, 2009 2:27 PM -
How to change transport request to local object again--plz help
Hi all,
By mistake I saved my FM in transport request.It is not released yet.I want it to be back in local object.Issue is that,when i deleted subrequest and that object from se09,package is not getting changed because the Function group is SAP standard,and not allowing changes.
Plz help.....I am in real problem..
Thanks in advance
MeenaHi,
Goto SE01,
enter the TR number
DISPLAY
Expand the TR object list
Place cursor on the object & right click & select DELETE object
You will get a popup asking the object is locked..do u want to proceed.. say YES
This will remove the object from the TR..
Now you can delete the TR if it doesnt hv any other objects. If you delete the TR then object wud authomatically come under local objects.
else...
Open the object & goto attributes.. change the class & save.
Best regards,
Prashant -
Import transport request from a file
Hi all.
I have followed all steps which have been explain in this forum. But when I have got the request in Import Queue and I click Request --> Import, system show an mistake:
Command: TMS_MGR_IMPORT_TR_REQUEST
Service: Transport Service
Start: Online
Function: TMS_TP_IMPORT
Message: TP_REPORTED_ERROR
Description: Transport control program tp ended with error code 203
Errors: wrong sintax in tp call.
And after:
ERROR: client 'T11' out of range, cllient range is 0 - 999
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0203
Do you know why this error occurs?
Thanks a lot.
Marta.Hello.
I have followed the steps:
Put file K900069.T11 in /usr/sap/trans/cofiles/.
Put file R900069.T11 in /usr/sap/trans/data/.
Then I acced to transaction: STMS and acced to Development Import Queue. Then Extras --> Other requests --| Add, and request T11K900069 have been added. And then Request / Import, and then SAP show the error I have copied in this forum.
Best Regards.
Marta. -
How to upload file to mime without selecting any Transport request
Hi experts,
My Function Module is like billow.. It is asking Transport request for every file....
FUNCTION ZBAPI_FM_UPLOAD_IMAGES_TO_MIME.
*"*"Local Interface:
*" IMPORTING
*" VALUE(PATH) TYPE STRING DEFAULT 'SAP/PUBLIC/VIJAY/'
*" EXPORTING
*" VALUE(RETURN) TYPE BAPIRET2
DATA: lr_mime_rep TYPE REF TO if_mr_api.
DATA: lv_filename TYPE string.
DATA: lv_path TYPE string.
DATA: lv_fullpath TYPE string.
DATA: lv_content TYPE xstring.
DATA: lv_length TYPE i.
DATA: lv_rc TYPE sy-subrc.
DATA: lt_file TYPE filetable.
DATA: ls_file LIKE LINE OF lt_file.
data subrc type sy-subrc VALUE 0.
DATA: lt_data TYPE STANDARD TABLE OF x255.
DATA: l_fname TYPE string.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select Multiple Files to Upload'
default_extension = ' '
* default_filename =
* file_filter = 'Photos (*.jpg) | *.jpg | *.png | *.bmp '
* with_encoding =
* initial_directory =
multiselection = 'X'
CHANGING
file_table = lt_file
rc = lv_rc
* user_action =
* file_encoding =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
others = 5
LOOP AT lt_file INTO ls_file.
CLEAR: lv_filename,l_fname.
lv_filename = ls_file-filename.
CALL FUNCTION '/SAPDMC/LSM_PATH_FILE_SPLIT'
EXPORTING
pathfile = lv_filename
IMPORTING
* PATHNAME =
filename = l_fname
CONCATENATE path l_fname INTO l_fname RESPECTING BLANKS.
cl_gui_frontend_services=>gui_upload(
EXPORTING
filename = lv_filename " Name of file
filetype = 'BIN'
IMPORTING
filelength = lv_length " File length
CHANGING
data_tab = lt_data " Transfer table for file contents
EXCEPTIONS
OTHERS = 19 ).
if sy-subrc = 0.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = lv_length
* first_line = 0
* last_line = 0
IMPORTING
buffer = lv_content
TABLES
binary_tab = lt_data
EXCEPTIONS
failed = 1
OTHERS = 2.
lr_mime_rep = cl_mime_repository_api=>if_mr_api~get_api( ).
lr_mime_rep->put(
EXPORTING
i_url = l_fname
i_content = lv_content
EXCEPTIONS
parameter_missing = 1
error_occured = 2
cancelled = 3
permission_failure = 4
data_inconsistency = 5
new_loio_already_exists = 6
is_folder = 7
OTHERS = 8 ).
commit work.
ELSE.
subrc = 1.
ENDIF.
ENDLOOP.
endfunction.
Please reply with any answers have..
thanks and regards
VijayThanks Leon,
My problem is solved, I was doing mistake now I have added one line of code and now it is working perfectly.
lr_mime_rep->put(
EXPORTING
i_url = l_fname
i_content = lv_content
i_dev_package = '$TMP' "Here i add package name as temp
EXCEPTIONS
parameter_missing = 1
error_occured = 2
cancelled = 3
permission_failure = 4
data_inconsistency = 5
new_loio_already_exists = 6
is_folder = 7
OTHERS = 8 ).
Thanks & regards
VIJAY
Edited by: VIJAY4vision on Feb 1, 2012 8:24 AM -
Offline transport of transport requests to file on Client-PC and re-import
Hi all,
for maintenance reasons, we copied a BW system in a Virtual Machine (VM) and made some BI-IP developments there (new InfoObjects, InfoAreas, DSOs, Cubes, MultiCubes, aggregation levels, filters, planning functions, queries etc.). The VM is "offline" with no transport system in place so far (all BW objects should have been saved to $TEMP). Thus, we cannot use SAP standard nor BW transport systems due to offline environment.
Now we set up a new BW server we want to "copy" our developments from the VM to.
What we are looking for:
(1)how can we export transport requests to a file on a client PC (VM) and then re-import the file on the other physical server again to further use our previous developments (no source systems in use)?
(2) any other best practice approach to that scenario
I already found an entry in another thread, which covers a similar issue but does not fully meet my requirements in my point of view: http://it.toolbox.com/wiki/index.php/Upload_and_download_SAP_transport_request .
Would be great if anyone has a solution to that scenario. If you need further details for clarification, please let me know.
Thanks in advance.
Stefan.Other solution found
-
Import steps not specific to Transport Request
Hi all,
I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
I followed two guides to do this:
SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
However when I release the request on the SOURCE server I get the following error:
M01####### My Request Name
M01 System M01
Checks at Operating System Level 05.03.2014 16:48:34 (0) Successfully Completed
Pre-Export Methods 05.03.2014 16:48:37 (0) Successfully Completed
Export 05.03.2014 16:48:47 (0) Successfully Completed
Import steps not specific to transport request
M02 Virtual System
Selection for Import 05.03.2014 16:48:47 (0) Successfully Completed
Import steps not specific to transport request
"Import steps not specific to transport request" expanded as:
Feedback after export or import 05.03.2014 16:48:48 (0) Successfully Completed
I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
Thank youHi Chinna,
Its a warning message you can ignore that... if you want to see what exactly the reason for warning in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects in Yellow...
Hope this helps,
Sudhakar. -
Datafile missing for a Transport Request
Dear Sir,
We created a Transport Request directly in our Quality Server and subsequently using SE10 we released the Transport Request also . However we find that there is no Data File & CoFile are found on the Quality Server for this request .
Due to this , we can not import the request in our production server also .
Kindly help us pl .
Rgds
Sonia AgarwalaHello,
First check the type of your transport request, probably it will be a "local transport" request.
Local transport requests do not generate data and cofiles when they are released.
Probably your current TMS setup does not allow you to release transports from the QA system.
What you can always do is creating a transport of type : "Transport of copies" and manually add your objects you want to transport.
Do not forget to fill in the "target" field in your transport, otherwise when you release it it will be again a local transport without data and cofile.
[https://service.sap.com/sap/support/notes/28967|https://service.sap.com/sap/support/notes/28967]
[Local Transport|Local Transport]
I hope this can help you further.
Best wishes.
Wim Van den Wyngaert -
Download a smartform on local disk based on transport request
Dear Experts,
I want to given on selection screen transport request and path .If in this tranport request there is any
smartform ,all download on local disk.
So what sud i have to do for this.Please give me a example for it.
Thanks,
Jatin sangalHI,
Use this below function module to get the spool to an internal table.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = l_spool_id
IMPORTING
pdf_bytecount = g_bin_filesize
TABLES
pdf = ipdf
EXCEPTIONS
err_no_otf_spooljob = 1.
The data will be fetched to IPDF internal table, then u can use GUI_DOWNLOAD function module to download this file to your specific location as below.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = g_bin_filesize
filename = g_file
filetype = 'BIN'
IMPORTING
filelength = g_file_size
TABLES
data_tab = ipdf
EXCEPTIONS
file_write_error = 1.
Thanks,
Ravi -
Transport Request doesn't appear in File System
Hello everybody,
i want to Transport a Request via File System. If i release the Request it doesn't appear in File System. The Logfile looks like this:
1 ETP199X######################################
1 ETP183 EXPORT PREPARATION
1 ETP101 transport order : "DA5K900033"
1 ETP102 system : "DA5"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "380.03.58" "720"
1 ETP198
2 EPU230XExecution of the export pre-processing methods for request "DA5K900033"
4 EPU111 on the application server: "SRV64"
4 EPU138 in client : "100"
2 EPU235XStart: Version creation of the objects of the request "DA5K900033"
3 EPU237 Version creation started as update request
2 EPU236 End: Version creation of the objects of the request "DA5K900033"
2 EPU231XStart: Adjusting the object directory for the objects of the request "DA5K900033"
2 EPU232 End: Adapting the object directory for the objects of the request "DA5K900033"
2 ETN085 "Adding component vector" " " " " " "
2 ETN085 "Finished." " " " " " "
1 ETP183 EXPORT PREPARATION
1 ETP110 end date and time : "20140519103034"
1 ETP111 exit code : "0"
1 ETP199 ######################################
I've allready granted Everyone Full Control to the \trans Directory for testing purposes.
OS: Windows Server 2008 R2
DB: MS SQL Server 2008 R2
Any suggestions?
Best regards
DominikHi Dominik
What is the target of this transport request? Are you sure it's not marked as "local" in transaction SE01 for example? Because if it is a local transport request, it will not generate a file.
Best regards
Tom -
Upload of Customs Duty Rates (xml file) without transport request creation
Hi All
Can we upload the Customs Duty Rates (xml file) without transport request directly in the system.
Thanks & Best Regards
KiranHi Kiran,
Please check transaction & program /SAPSLL/TLC_CUSB_UPL in GTS.
This allows you to upload the XML from a local source or an application server path.
I do not think a transport request is required in this scenario.
Best Regards,
Eoin -
Import GP Local Transport Request Package
Hi, SDN Expert.
I am trying to move my GP Process from one system to another system.
I have create the transport package in sda format in to my local drive through "GP Transport" --> "Create transport request". When I tried to import the transport package through "GP Transport" --> "Import transport request". The only option for me to import the package is through End Point Alias. I do not have the End Point Alias setup, as I plan to import the transport package locally.
My question is what is the right channel to import the sda package that I have exported? Is that through "GP Transport" --> "Import transport request" (but I don't see that option to import sda). Or I can use SDM tool to do so?
Thanks,
KCHello,
if you are using netweaver 7.0 :
After exporting there is an option "download sca file", click there , download it to your pc and then you will have to use SDM to upload it in the destination system.
Then you have to release the transported objects:
After uploading it, log in into the destination system , go to guided procedures -> administration -> Import transport requests --> go to the process you transported and select it so you can release it for use.
Regards,
Marco. -
Mass local transport request change to Particular Target Server
Hi there,
we have like 150+ local transport request and now we are looking to do mass changes to Particular transport request server? any programs that would do this? or any other way?
Thanks in advance
Kumaredit: First and foremost, backup your DB!!
1. Get downtime for the system. It's just not smart moving in that many chagnes w/ the system running.
2. Shut the system down. Lock all the users (you can do this via updating USR02, set UFLAG = 64).
3. Backup the current buffer file: should be in the trans\buffer folder. Delete it afterwards.
3. Start SAP.
4. Copy and paste the transports into a spread, generate a list that looks like this:
tp pf=
sharepath\TP_DOMAIN_<SID>.PFL addtobuffer <transport> <SID>
Run this in order, make sure the transport dependencies are correct in order.
After this, you should have generated a large buffer, with all the 150+ transports, in order they are to be into the system.
5. Run tp IMPORT ALL <SID> CLIENT=### u12356 pf=
networkshare\TP_DOMAIN_<SID>.PFL
This will move all 150+ changes into the system at once.
6. Unlock users, restart SAP system.
Edited by: Kevin Lin on Jul 16, 2008 7:23 PM
Maybe you are looking for
-
Can someone help me with optimal specs for a 2012 R2 server migration from 2003 R2?
My specs for the Windows Server 2003 R2 which is our file server are: Intel Core 2 CPU 6600 @ 2.40GHz (2 CPU's), ~2.4GHz Processor types are x86 Family 6 Model 15 Stepping 6 GenuineIntel ~2399 Mhz Physical Memory is 2 GB RAM Virtual Memory is 4 GB We
-
Is there a limit to number of images in Lightroom4 web gallery?
What is the total number of images that can be in a LR4 Web HTML Gallery? Is there a limit? I am using Mac OS LION.
-
Pictures are not shown when saving to PDF. Cannot Preview Print Job.
Help! Pictures are not shown when saving to PDF. Cannot Preview Print Job.
-
User Exit to configure custom picking strategy
Wonder if anyone can help - I've been requested by one of our analysts to look into the user exit to allow us to define a custom Raw Material picking strategy. Currently we use FIFO which seems to work on the date that the material is receipted into
-
Wlse 2.9 alarm e-mail timestamps
Hi, I'm evaluating a wlse 2.9 and have found that, when I'm emailed due to a threshold violation etc, the timestamp on the e-mail is in GMT. Is there a way to change this to a local time zone? .....thx.........J