Transport request import

configuration was done in client 000 and transport request put in, would like to know how to import in QA system?
Thank you,
zack

Hi
Let me tell you all the three scenarios
1.
If you are on same system with different clients as 100(DEV) 200(QAS) and 300(PRD) then use SCC1 and import the request form the source client by giving the transport request number.
2.
If you are on the same client and want to set up the transport route fot the within your system then you need to use Extended transport control to set up the transport route within the system.
3.
If you are on different systems as DEV QAS and PRD then use tcode STMS_IMPORT to import the tranport requests and if this doesn't work then import the requests manually through OS
tp addtobuffer <Trnspt req num> <SID> <Client> pf=<path to parameterfile>
and then
import reqst manually
tp import <Trnspt req num> <SID> <Client> UXXX
Goodluck
Rakesh

Similar Messages

How do I find from which terminal transport request imported to PRD

Hi Experts,
Let me know how can I find from which terminal transport request imported to PRD
Thank you in advance.
Regards,
Raj

Hi Raj,
Please find the answer for your question in below discussion.
How to find out workstation of a transport request created
I hope it will help you
BR
AKJ

Error during transport request import - how to get it's text at runtime?

Good day to you, Ladies and Gentlemen!
Would be glad if someone can give me an advice.
Suppose we are importing a transport request to a system. And an error occurred during import.
In my program I want to display why the transport failed. How can I get the error message text with description of what is wrong? The same we can see at the transport log?

Hi
If you mean reading the Transport Log of a request you can use this FM
data: lines type table of TRLOG.
CALL FUNCTION 'TR_READ_LOG'
EXPORTING
   IV_LOG_TYPE             = 'FILE'
   IV_LOGNAME_FILE         = '/usr/sap/trans_UE6/log/E7DG900147.UE6'
TABLES
    et_lines                = lines
EXCEPTIONS
   INVALID_INPUT           = 1
   ACCESS_ERROR            = 2
   OTHERS                  = 3
You just have to figure out which directory is you system using to store the Transport Logs. Also note that in this case UE6 it would be the logical name of your system and E7DG900147 the transport request number.

How to cancel changes that were made via transport request importing?

Hi!
Could you please tell me whether it is possible to cancel changes that were made via importing of transport request into the system?
Thanks and Regards,
Siarhei

hi
the programs maitains the versions ...just check the version managemet..
regds

Transport Request import Error

Hello Experts,
When I import transport request SAP system from another SAP system then getting error as "Result of cross-total check indicates a damaged data file (9114)" with the return code 16. Please suggest any one what is problem and how to resolve it?
Thanks.

Hi,
You can generate a transport os copies for the sae request an release it to get a proper datafie and cofile.
Regards,
Nirmal.K

Transport request import scheduled in background fails

Hi folks,
In our landscape we have PRD and an Application server. We want to import transport requests in background at a defined time. Though the job status shows up as finished however in the job log it reports - Transport control program tp ended with error code 0232.
In the STMS queue, the request is in still being imported status for long time unless SAP is restarted.
If I change the job in SM37 and give one of the servers (PRD or Appl server) as the execution target the job finishes successfully and request is imported.
My Question is how can I get the job to finish properly without having to enter the execution target each time? I should schedule the transport in background in STMS and it should finish without error.
Regards,
Sai Rolla

Hi SAI,
See this SAP Note 165708 - Test call for tp ended with error code 0232 :
Cause and prerequisites
In the transport configuration file TP_DOMAIN_<TDC_SID>, where <TDC_SID> is the SID of the R/3 system which is used as transport domain controller, the database name of the affected R/3 system is written in lower case, thus you will find the following entry:
     <SID>\DBNAME = <<sid>>
Solution
From within the transport domain controller <TDC_SID> change the transport log in the affected system. To do this, proceed as follows:
      1. Call up Transaction STMS.
      2. Choose "Overview/Systems". On the following screen select the affected system.
      3. Choose "Transport tool" and "Display <--> Change".
      4. For DBNAME write the SID in upper case.
      5. Save and let configuration distribute immediately.
      6. Exit maintenance.
To ensure that no incorrect transport configuration file is generated with a new setup or an enhancement of the transport domain and subsequent activation and distribution, change function module TRINT_PP_GET_DEFAULT_VALUES as described in the attachment or apply the respective Hot Package. (You should do this for all systems participating in the transport domain and not only in the transport domain controller <TDC_SID>.)
Best Regards
AK

Transport Request Import E-mail Notification

Experts ,
Whenever we transport an change request to Target system , say to QA system , Can we get an E-mail notification that the transport request has reached Target system. If yes, How can this be achieved. ???
Would appreciate your reply .
Thanks,
Ashutosh

Hi
You need to setup a workflow for Transport requests.The mail can be sent to Business workplace(t-code SBWP) inbox or sent to exchange server for a internet email. Go to SE09 and click on Transport Proposal Tab which is right next to Global Information Tab. You can read the SAP HELP there to activate this mechanism.
Reward points if helpful

Transport Request import to Test System

Hi,
I imported a request from Dev to Test
But it seems to running from past 2 hours..
Logs                                Complete
Selection of Import             Complete
ImportCheck Versions         Complete
How can i check whats happening behind
Thanks

Hi,
   while trasporting from DED to test .
before you some other has released TR which having routines and some TR's are merged into One.so it might took longer period to complte transport.
while relesing u r TR ,please chk is any other TR 's are realsed.so if released wait until there TR to complte then release your TR.
some times if queue has struck also it will take time ,at that time contact BASIS team will act to solve this
mahesh

Import steps not specific to Transport Request

Hi all,
I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
I followed two guides to do this:
SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
However when I release the request on the SOURCE server I get the following error:
M01#######            My Request Name
M01        System M01
             Checks at Operating System Level         05.03.2014 16:48:34    (0) Successfully Completed
             Pre-Export Methods                       05.03.2014 16:48:37    (0) Successfully Completed
             Export                                   05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
M02        Virtual System
             Selection for Import                     05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
"Import steps not specific to transport request" expanded as:
Feedback after export or import 05.03.2014 16:48:48    (0) Successfully Completed
I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
Thank you

Hi Chinna,
Its a warning message you can ignore that... if you want to see what exactly the reason for warning in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects in Yellow...
Hope this helps,
Sudhakar.

To show the release status of the transport request

Hello Experts,
I am having a requirement like the following:
I need to list the transports along with the release status of the transport request in a View.
Release status means that transport request imported into Development system, Quality system and Production system.
Which table will hold this information?
I have checked with E070. But i dont know how to find in that. Or any other table is there to do this?
Thanks and Best Regards,
Suresh

Hello Kalyan,
I dont know how to find my request in TMSBUFTXT.
For example i am having a TR now in Dev system: XXX45678.
If i have imported it to Quality system, then how to find this entry?
Or if i have imported it to Production system, then how could i find that the TR XXX45678 is now in Production system.
Since i am creating a View, i need the information that in which Database Table this entry will be stored.
I dont want Function module name.
Best Regards,
Suresh

Error while importing a transport request

Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.

Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh

Error while importting Transport Request

Hi,
I am getting following errors while Transporting requests from Development to Test System
Error getting fields for PSA /BIC/B0000643
Error occurred during post-handling RS_AFTER_IMPORT ofr DTPA L
The Transport request just contains one Transformation the corresponding DTP.
We are using BI 7 for Bank Analyzer and have just imported SP11. This problem has started coming only after the import of SP11.

Hi Pom,
Yes the DS were active. I tried to re-transport that too but the TR failed with similar error.
Finally I tried to manually activate the DTP in the Target system and got the same error. I rectified the problem by deleting the DTP from the Target system. But I am not sure why this happened. Please let me know if you have any idea abt the same.
Thanks
Pooja

Unable to Import Transport Request

HI all,
I was trying to import some Transport request, but it pops an error: ERROR: "Transport control program tp ended with error code 0012"
"Errors: A tool used by tp aborted".
Any ideas,
Thanks.
Ravi.

Hi Rave
You should expand the message and give us more details, but I think there are some problem about connection between your severs.
Max

Unable to Import Transport Request - hanged with Truck icon

Dear SAP Expert,
Our DEV & QAS are on normal domain installation but Production installation is on HA Cluster on Windows.
We have configured the STMS for the CRM landscape system and domain is Development server. While trying to import all the Transport Request, it is getting hanged and showing in import running status (showing Truck icon).
We have checked some possible logs and reviewed the complete STMS configuration, profiles and process and found the BG job RDDIMPDP is not getting scheduled continuously.
The below error is from latest log file u201CSLOG1151.PCRu201D from F:\usr\sap\trans\log (global directory) from Production server for your review
WARNING: System PCR. Warning.        20111220144048 :
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=PCR pf=
VSAPPRDCRMSCS\sapmnt\PIS\SYS\profile\DEFAULT.PFL
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
I would request, please help me for resolving this issue immediately as our GO-LIVE date is nearby and have to import all the TRs from CRM QAS to this PRD servers.
Kindly let me know, if you need any further information.
Thanking you,
Devki Nandan

Hi,
This forum is for SAP application called as 'SAP Transportation Management'. Your query is irrelevant to this forum. Please look for an appropriate forum to post your query.
Regards,
Nageshwara Manda

Not able to import transport request in A66

Hi Expert,
I have done an amendment via t.code OBR3 in N66 so created a transport request. I went to SE01 to release the transport request and I saw the status is released and the is a warning message "Import steps not specific to transport request". I logged on to A66 and go to STMS_IMPORT but I could not find my transport request to import it into A66. Did I missed out anything? Have I done anything wrong?
Kindly advise.. thanks

hi
sometime it happens recreate the transport request and try to re-import it may work.

Transport request import

Similar Messages

Maybe you are looking for