Transport Request  import Error

Hello Experts,
When I import transport request SAP system from another SAP system then getting error as "Result of cross-total check indicates a damaged data file (9114)" with the return code 16. Please suggest any one what is problem and how to resolve it?
Thanks.

Hi,
You can generate a transport os copies for the sae request an release it to get a proper datafie and cofile.
Regards,
Nirmal.K

Similar Messages

  • Transport Reuest import error in BW Live System

    Hi,
      I raised a transport request in BW Development system for the changes i made to the queries that are already avaliable in Live system.
      I imported the request with out error in Quality System and the queries in Quality are updated with the changes i made.
      When i import the same request to Live system it is failed with error RC 8.
      When i checked the queries one query is updated with the changes i made in Dev system and other is not updated
    Error Msg:
    Object ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported successfully
    Diagnosis
    The object R3TR ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported without error.
    System Response
    Import post-processing is not performed for this object.
    Procedure
    Examine the import log for this transport request for error messages.
    Repeat the import after removing the cause of the errors.
    Please update me how to proceed
    Thanks

    One of the query elements (e.g. Calculated Key Figure, Variable, et. al.) was not captured on your transport and has never been imported into your target environment.
    In your development system, go to SE16 and query on table RSZELTDIR to determine which query element the thrown issue is referring to. Use the following parameters for your query:
    ELTUID (ID) = 8HV3QPKGUZL61GQH00KRI7369
    OBJVERS (Varsion) = A
    The MAPNAME (Query) column will give you the name of the query element that you'll need to put on a transport and move through to your target environment.

  • How do I find from which terminal transport request imported to PRD

    Hi Experts,
    Let me know how can I find from which terminal transport request imported to PRD
    Thank you in advance.
    Regards,
    Raj

    Hi Raj,
    Please find the answer for your question  in below discussion.
    How to find out workstation of a transport request created
    I hope it will help you
    BR
    AKJ

  • Error during transport request import - how to get it's text at runtime?

    Good day to you, Ladies and Gentlemen!
    Would be glad if someone can give me an advice.
    Suppose we are importing a transport request to a system. And an error occurred during import.
    In my program I want to display why the transport failed. How can I get the error message text with description of what is wrong? The same we can see at the transport log?

    Hi
    If you mean reading the Transport Log of a request you can use this FM
    data: lines type table of TRLOG.
    CALL FUNCTION 'TR_READ_LOG'
    EXPORTING
       IV_LOG_TYPE             = 'FILE'
       IV_LOGNAME_FILE         = '/usr/sap/trans_UE6/log/E7DG900147.UE6'
      TABLES
        et_lines                =  lines
    EXCEPTIONS
       INVALID_INPUT           = 1
       ACCESS_ERROR            = 2
       OTHERS                  = 3
    You just have to figure out which directory is you system using to store the Transport Logs. Also note that in this case UE6 it would be the logical name of your system and E7DG900147 the transport request number.

  • CHARM Import Transport Request (Background) Error

    Dear Experts,
    We are Facing problem in Charm TR import with below error.
    Current phase of project: Development with Release
    Action to be checked: Schedule Manager: Import into Test Systems
    Start Import (Project SID_P00005)...
    Try to connect via TMS-internal RFC destination...
    TMS communication error with TMSSUP#SID.DOMAIN_SID
    Import error. Check TMS Alert Viewer in target system
    RFC TMSSUP#SID.DOMAIN_SID is failing with authorization test.
    Diagnosis
    There was an error during communication with the RFC destination
    TMSSUP#SID.DOMAIN_SID
    System Response
    The exact error message of the system is:
    Name or password is incorrect (repeat logon)
    please suggest how to correct this Authrization error
    Regards,
    Siva.

    Dear Laxman,
    Kindly give me a link for any authorization docs, for SOLMAN and MANAGED SYSTEMS which roles need to be assigned for general Team member , Change manager and BASIS admin.
    Please  provide any docs.
    i reffered to standard , where i am littlebit confused.
    please provide some docs.
    Regards,
    Siva

  • Transport request moved error

    Dear all,
    while move to the transport request its not imported in prd server. while doing the request its show the given error:
    hostname.domain.com :52934
    RFC error :Connection to partner:
    Its  very urgent.any one know pls reply immeidiate.
    jeeva.

    Hi,
    Check TMS configuration for your production system to domain controller.
    Go to STMS_DOM --> select production system --> then from menu select SAP system --> check --> transport directory,connection test , transport tool.
    Also check RFC (something like TMSADM@<SID>.DOMAIN_<SID> )between domain controller and production server vice a versa.
    Regards

  • Transport request file error

    Hi every one!
    I am a ABAP programmer . I  support a client from my company's place.My company got SAP system and client got his system. When ever client needs a change in his program, I change the prog in my sytem and send the source code along with two transport request files(eg: K901243.DM4 , R901243.DM4) to my client. There he copies them to his system and transport them .This time it gave the following error at client system while transporting .
    Error : 'This program has version 6.14, the file is not an R3trans data file. Please consult SAP support' .
    Please give me a solution .  TQ
    Edited by: Srinivas reddy on Aug 22, 2008 10:27 AM

    Hi Amit ! Can you pl elaborate .R3trans -d   , tp-v . How to check?
    Pl elaborate R3trans -l <data file> . How to test R3trans -l <data file>  ?
    Here is the complete log file .
        Main import
                                                                                    |   Transport request   : DM4K901243
                                                                                    |   System              : RN2
                                                                                    |   tp path             : tp
                                                                                    |   Version and release: 371.02.24 700
                                                                                    |
                                                                                    |   R3trans version 6.14 (release 700 - 11.04.07 - 14:28:00).
                                                                                    |   ===============================================
                                                                                    |
                                                                                    |   date&time   : 22.08.2008 - 14:28:20
                                                                                    |   control file: /usr/sap/trans/tmp/DM4KK901243.RN2
                                                                                    |   > #pid 1204300 on CDBAXD01 (rn2adm)
                                                                                    |   > import
                                                                                    |   > buffersync=yes
                                                                                    |   > file='/usr/sap/trans/data/R901243.DM4'
                                                                                    |   > continuation='/usr/sap/trans/data/R901243_#.DM4'
                                                                                    |   > client=400
                                                                                    |   > csi=yes
                                                                                    |   > repeatimport=yes
                                                                                    |   >
                                                                                    |   > excluding 'R3TRDDDD','R3TRDOMA','R3TRDTEL','R3TRENQU','R3TRMACO','R3TRMCID','R3TRMCOB','R3TRSHLP','R3TRSQLT','R3TRTABL','R3TRTTYP |
           |   R3trans was called as follows: R3trans -u 26 -w /usr/sap/trans/tmp/DM4I901243.RN2 /usr/sap/trans/tmp/DM4KK901243.RN2
           |   active unconditional modes: 26
                                                                                    |   Connected to DBMS = ORACLE --- dbs_ora_tnsname = 'RN2' --- SYSTEM = 'RN2'.
         / |   0 0
                                                                                    |   COMMIT (0).
                                                                                    |    trace at level 1 opened for a given file pointer
                                                                                    |
                                                                                    |   ================== STEP 1 =====================
                                                                                    |   date&time        : 22.08.2008 - 14:28:25
                                                                                    |   function         : IMPORT
                                                                                    |   data file        : /usr/sap/trans/data/R901243.DM4
                                                                                    |   Continuation     : /usr/sap/trans/data/R901243_#.DM4
                                                                                    |   buffersync       : YES
                                                                                    |   client           : 400
                                                                                    |   repeatimport     : YES (corresponds to unconditional mode 1)
                                                                                    |   repeatclimport   : NO
                                                                                    |   c.s.i.           : YES
                                                                                    |   l.s.m.           : VECTOR
                                                                                    |   charsetadapt     : YES
                                                                                    |   def. charset     : WEUROPEAN
                                                                                    |   commit           : 100000
                                                                                    |   table cache      : 32000000
                                                                                    |   EXCLUDING        : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R |
           |
                                                                                    | Unexpected record length 20035 at file position 0.
                                                                                    | This file seems not to contain transport data (or it was destroyed during file transfer?).
           | incompatible versions of transport programs ...
                                                                                    | ===> HALT: This program has version 6.14, the file is not an R3trans data file. Please contact the SAP support.                    
           |   ROLLBACK (0).
                                                                                    |   End of Transport (0016).
                                                                                    |   date&time: 22.08.2008 - 14:28:25
                                                                                    |   4 errors occured.
                                                                                    |   Main import
                                                                                    |   End date and time : 20080822142825
                                                                                    / | Ended with return code:  ===> 16 <===
                                                                                    |   ######################################                                                                               
    TQ
    Edited by: Srinivas reddy on Aug 25, 2008 11:30 AM

  • Transport request import scheduled in background fails

    Hi folks,
    In our landscape we have PRD and an Application server. We want to import transport requests in background at a defined time. Though the job status shows up as finished however in the job log it reports - Transport control program tp ended with error code 0232.
    In the STMS queue, the request is in still being imported status for long time unless SAP is restarted.
    If I change the job in SM37 and give one of the servers (PRD or Appl server) as the execution target the job finishes successfully and request is imported.
    My Question is how can I get the job to finish properly without having to enter the execution target each time? I should schedule the transport in background in STMS and it should finish without error.
    Regards,
    Sai Rolla

    Hi SAI,
    See this SAP Note 165708 - Test call for tp ended with error code 0232 :
    Cause and prerequisites
    In the transport configuration file TP_DOMAIN_<TDC_SID>, where <TDC_SID> is the SID of the R/3 system which is used as transport domain controller, the database name of the affected R/3 system is written in lower case, thus you will find the following entry:
         <SID>\DBNAME = <<sid>>
    Solution
    From within the transport domain controller <TDC_SID> change the transport log in the affected system. To do this, proceed as follows:
          1. Call up Transaction STMS.
          2. Choose "Overview/Systems". On the following screen select the affected system.
          3. Choose "Transport tool" and "Display <--> Change".
          4. For DBNAME write the SID in upper case.
          5. Save and let configuration distribute immediately.
          6. Exit maintenance.
    To ensure that no incorrect transport configuration file is generated with a new setup or an enhancement of the transport domain and subsequent activation and distribution, change function module TRINT_PP_GET_DEFAULT_VALUES as described in the attachment or apply the respective Hot Package. (You should do this for all systems participating in the transport domain and not only in the transport domain controller <TDC_SID>.)
    Best Regards
    AK

  • How to cancel changes that were made via transport request importing?

    Hi!
    Could you please tell me whether it is possible to cancel changes that were made via importing of transport request into the system?
    Thanks and Regards,
    Siarhei

    hi
    the programs maitains the versions ...just check the version managemet..
    regds

  • Transport request import

    configuration was done in client 000 and transport request put in, would like to know how to import in QA system?
    Thank you,
    zack

    Hi
    Let me tell you all the three scenarios
    1.
    If you are on same system with different clients as 100(DEV) 200(QAS) and 300(PRD) then use SCC1 and import the request form the source client by giving the transport request number.
    2.
    If you are on the same client and want to set up the transport route fot the within your system then you need to use Extended transport control to set up the transport route within the system.
    3.
    If you are on different systems as DEV QAS and PRD then use tcode STMS_IMPORT to import the tranport requests and if this doesn't work then import the requests manually through OS
    tp addtobuffer <Trnspt req num> <SID> <Client> pf=<path to parameterfile>
    and then
    import reqst manually
    tp import <Trnspt req num> <SID> <Client> UXXX
    Goodluck
    Rakesh

  • Transport Request Import E-mail Notification

    Experts ,
    Whenever we transport an change request to Target system , say to QA system , Can we get an E-mail notification that the transport request has reached Target system.  If yes, How can this be achieved. ???
    Would appreciate your reply .
    Thanks,
    Ashutosh

    Hi
    You need to setup a workflow for Transport requests.The mail can be sent to Business workplace(t-code SBWP)  inbox or sent to exchange server for a internet email. Go to SE09 and click on Transport Proposal Tab which is right next to Global Information Tab. You can read the SAP HELP there to activate this mechanism.
    Reward points if helpful

  • Transport Request import to Test System

    Hi,
    I imported a request from Dev to Test
    But it seems to running from past 2 hours..
    Logs                                Complete
    Selection of Import             Complete
    ImportCheck Versions         Complete
    How can i check whats happening behind
    Thanks

    Hi,
       while trasporting from DED to test .
    before you some other has released TR which having routines and some TR's are merged into One.so it might took longer period to complte transport.
    while relesing u r TR ,please chk is any other TR 's are realsed.so if released wait until there TR to complte then release your TR.
    some times if queue has struck also it will take time ,at that time contact BASIS team will act to solve this
    mahesh

  • Transport Package Import Error/Warning

    Hi Experts,
      I Created a New Transport Package (SE80) in BI Development and Imported to BI Test System.
    I am getting the below Transport warning...What does it mean...can i ignore it
    ABAP Dictionary Activation---Result '(4) Ended with Warning'
    Log:
    No object to be deleted and activated exists 
    Thanks

    hi,
    i hope this is due to no objects selected in the package.
    try including any object in the package and transport to the testing server and you may not get this warning too.
    Ramesh

  • Import steps not specific to Transport Request

    Hi all,
    I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
    I followed two guides to do this:
    SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
    How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
    However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
    So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
    Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
    However when I release the request on the SOURCE server I get the following error:
    M01#######            My Request Name
    M01        System M01
                 Checks at Operating System Level         05.03.2014 16:48:34    (0) Successfully Completed
                 Pre-Export Methods                       05.03.2014 16:48:37    (0) Successfully Completed
                 Export                                   05.03.2014 16:48:47    (0) Successfully Completed
          Import steps not specific to transport request
      M02        Virtual System
                 Selection for Import                     05.03.2014 16:48:47    (0) Successfully Completed
          Import steps not specific to transport request
    "Import steps not specific to transport request" expanded as:
      Feedback after export or import 05.03.2014 16:48:48    (0) Successfully Completed
    I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
    The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
    My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
    Thank you

    Hi Chinna,
    Its a warning message you can ignore that... if you want to see what exactly the reason for warning  in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects  in Yellow...
    Hope this helps,
    Sudhakar.

  • Unable to delete transport request

    Hi Team,
    The Standalone sandbox with ECC 6.0
    Im deleting the transport request , getting error unable to delete the tranport request
    Cannot open log:
    hostname\sapmnt\trans\log\CC000036.SID.
    Kinldy assist me in solving the issue .
    Regards
    Kumar

    Hi,
    Are you trying to remove the transport request from the STMS buffer? This only removes the TR from the buffer. It still stays in the system. If you want to delete the transport request altogether then remove from SE01.
    Check if the file
    hostname\sapmnt\trans\log\CC000036.SID exists. If so, then make sure it has proper authorizations. It should be accessible by <sid>adm and SAPService<SID> if Windows host. Also the trans directory should be accesible by the two users.
    Regards,
    Srikishan

Maybe you are looking for