Trap odbc errors

Hi!
I have to use MS-Access2000 as a frontend for an oracle database. And I dont want to see these ORA-xxxx Popups if an error occures.
So I use something like the following in access (it should work with sql-server....):
Private Sub Form_Error(DataErr As Integer, Response As Integer)
Dim errX As DAO.Error
If Errors.Count > 1 Then
For Each errX In DAO.Errors
Debug.Print "ODBC Error"
Debug.Print errX.Number
Debug.Print errX.Description
Next errX
end if
End Sub
But I always get Errors.Count=0 :-(
Oracle is version 9.
What is wrong ?
What can I do, to get the oracle-error-number - or better the full error-description from the popup?
Thanks,
Detlev

I'm not an expert VB programmer, but have you shown us where/ how Errors is created and populated?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

Powerpivot Report 2010 - OLE DB or ODBC error: Query timeout expired; HYT00

0
I have report already developed by someone in powerpivot 2010 and deployed to sharepoint in powerpivot gallery library. The data source for this report is SQL Server 2008 r2. I have set the refresh options in sharepoint to run after business hours during
week end. When I check the refresh history it shows this error message "OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the
transaction failed..
I have tried to run the "Also refresh as soon as possible " just to check but same error message is shown.
This is the detailed error message details:
03/02/2014 21:06:55 03/02/2014 22:08:15 01:01:20 Failed
OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the transaction failed
Could anyone guide me on this issue? Truly appreciate your help in advance.

Hi asritha,
I would suggest you take a look at the following articles regarding how to configure PowerPivot data refresh in SharePoint Server:
Configure and Use Stored Credentials for PowerPivot Data Refresh:
http://technet.microsoft.com/en-us/library/ee210671(v=sql.105).aspx
Configure and Use the PowerPivot Unattended Data Refresh Account:
http://technet.microsoft.com/en-us/library/ff773327(v=sql.105).aspx
Note: Please ensure that the account have sufficient permission access to your data source.
In addition, please elaborate your PowerPivot data soure with more detail. If you are using SSAS cube, please try to increase "ExternalConnectionTimeout" property default value to see if this helps. Here is the similar thread for your reference,
please see:
http://social.technet.microsoft.com/Forums/en-US/35b26c06-9e6d-41e5-ae44-bfb1233510ac/ssas2008-ole-db-error-ole-db-or-odbc-error-query-timeout-expired-hyt00?forum=sqldatamining
Regards,
Elvis Long
TechNet Community Support

ODBC Error connecting to a stored procedure SQL Server 2008 - Crystal 8.5

I am running a local copy of SQL server 2008 and get an ODBC error when connecting to any stored procedure with or without parameter. The database are running in SQL Server 2000 compatibility mode on the local server.
Do not get the error when connecting to one or more databse tables or when connecting to a stored procedure on a remote database.
The error reported is "ODBC error:[Microsoft][ODBC SQL Server driver] Syntax error or access violation"
I am running Vista OS.
Any help would be appreciated..

Hello,
Interesting combination. All but CR 8.5 is supported on that OS.
When you created your DSN did you using the 2008 Client or MDAC?
I suggest you go back to supported platforms for CR 8.5
If not then start debugging Vista permissions to start with...
good luck
Don

Customizing ODBC errors in OBIEE 11g

Hi,
I have a requirement where the user is expecting to see some Custom error messages instead of the Default ODBC errors OBIEE throws. Like the one below.
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22055] First argument of Parent function must be a hierarchy in a Parent-Child dimension with a single column Member Key. (HY000)
Where i can find the files which has these messages.They should be on some .xml or Java file on the server. If i know that location, i can change the error into Custom error messages.
Any help would be really appreciated.
Thanks
Swami

Swami,
These kind of custom error messages,You need to do it manually for each report
Edit Analysis Properties ---- Results Display ----- Display Custom Message
Mark if you helps,
Thanks,

ODBC Error while Siebel Server try to connect to Oracle 10G

We have managed to get through with the configuration of siebel server on HP Unix. However before we get to the Database configuration, we are encountering errors with ODBC connection to oracle 10g database. We are able to connect to oracle using sql plus but odbc connection is failing. We verified for patches, missing files, directory access rights - but no clue as of now.
Our error says:
Logging into "ENTSIA_DEV_DAN" as "sadmin"....
/user/lib/hpux32/dld.so: Unable to find library 'libclntsh.so'.
ODBC error IM0003 in SQLConnect:
(DataDirect){ODBC lib} specified driver could not be loaded
Unable to login using specified odbc parameters
This has become a show stopped for us and we are strugging with this for the past three days without much direction.
Any help is greatly appreciated.
Thanks.

Hi,
I guess your DataDirect Driver which gets registered during Database Configuration has some problems.
Can you check whether the DSN is using the proper Driver?
Also, the username through which you are logging in to start Siebel Services must have proper rights.
Many times on Windows platform i have noticied this error in ODBC due to improper user rights. If the rights are not proper, the DataDirect Driver fails to get loaded & throws similar error.
Regards,
Shalabhsneha

Trapping ora- errors in alert.log

hello everyone,
A classical question that I think every DBA has encountered.
We have about 40 oracle database servers, some with 9i, others with 10g, still others with both. Some on Linux, others on Solaris.
My question is, how to trap ora- errors in the alert.log of these database and having them being sent as an email.
It's not an easy question to answer, I know. But I'd like to get ideas from your experiences in implementing the same thing in your environments.
Many thnx.
Hiruya

Hi,
this let you look for errors :
utl_file.get_line(vInHandle, vNewLine);
IF vNewLine like ('%ORA-%') then
Then this let you to mail the errors :
utl_smtp.mail
Here is my complete script :
SET SERVEROUT ON
DECLARE
c utl_smtp.connection;
vInHandle utl_file.file_type;
vNewLine VARCHAR2(250);
vMessage VARCHAR2(250);
I pls_integer := 0;
LC$Fic_in Varchar2(128) := 'db1ALRT.LOG'; -- a adapter sur votre configuration
LC$Dir_in Varchar(30) := 'C:\oracle\admin\db1\bdump';
PROCEDURE send_header(name VARCHAR2, header VARCHAR2) AS
BEGIN
utl_smtp.write_data(c,name ||':'|| header || UTL_TCP.CRLF);
END;
BEGIN
vInHandle := utl_file.fopen(LC$Dir_in, LC$Fic_in, 'R');
LOOP
BEGIN
utl_file.get_line(vInHandle, vNewLine);
IF vNewLine like ('%ORA-%') then
vMessage:=vMessage||chr(10)||vNewLine;
END IF;
EXCEPTION
WHEN OTHERS THEN
EXIT;
END;
END LOOP;
utl_file.fclose(vInHandle);
-----------------------SEND A MAIL---------------------------
c := utl_smtp.open_connection(‘smtpserver’,25);
utl_smtp.helo(c, ‘something.com');
utl_smtp.mail(c, [email protected]');
utl_smtp.rcpt(c, ‘[email protected]');
utl_smtp.open_data(c);
send_header('From', '"someone" <[email protected]>');
send_header('To', '"Recipient" < [email protected] >');
send_header('Subject', 'DB1 ERREUR ALERT LOG');
utl_smtp.write_data(c, UTL_TCP.CRLF ||vMessage);
utl_smtp.close_data(c);
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error
OR utl_smtp.permanent_error THEN
NULL;
END;
raise_application_error(-20000, SQLERRM);
END fopen;
/

"ODBC Error= [17] [] "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQ

Hi,
I am getting the above error when trying to connect to a database located on remote database. if the database is on same system no problem.
any clue???????pls help me.

The full error msg is as follows and the back ground of the problem is decribed below...pls help me out.
I have written some perl programs to be called by java to execute some database related tasks. My database located at a remote win2K server and database is MSSql and my programs are executing on WIN2k server. The problem is with perl talking to remote database...the following error is displaying...
"ODBC Error= [17] [] "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied."

ODBC error checking in a data model

At my client we're using PD 16.5.0 build 3982, and we're trying to check in a LDM that was originally generated from a PDM. When we try and check the LDM in to the repository, we get an ODBC error:
ODBC driver for Oracle
ORA-12899: value too large for column "PMTEXT"."TDAT" (actual: 2002, maximum: 2000)
SQLSTATE = NA000
I have an old (PD 16.1) PDM for the repository, which shows the column as having a length of 30,000, not 2,000. On my own laptop, the 16.5.3 (Sybase SQL Anywhere) repository also shows the column as varchar(30,000). However, the client's 16.5.0 Oracle database shows the column as varchar2(2000).
Has anyone else had this problem with an Oracle repository?

Check your settings for MaxBytePerChar in your ODBC connection details. If you have a multi byte database this helps to correctly store chars that are represented by more than 1 byte, e.g. the EUR sign in a comment field.

ODBC error in BI Launch pad

hi,
am very new to SAP BI/BW/BO
i am getting error while running the query in BI launch pad, which i imported from the UDT
in UDT the values are being displayed and all the parameters were clearly defined
the query is being running perfectly in RICH CLIENT but the same query unv file is not been running in BI launchpad
where would be the actual problem ????
NOTE:
its showing ODBC error and no default drivers specified.
but as i mentioned above , its displaying the values in UDT and Rich client ( Enterprise ) mode but not in BI Launchpad.
please help me out..?
specifications:
SAP business intelligence 4.1
32 bit windows home premium

Santosh,
Create the same ODBC connection in server also, so that you will be able to view in BI Launchpad also.

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

ODBC error occurred while executing SQLExtendedFetch to retrieve the result

Good morning everyone,
I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
It's taking around 2,5 minutes to run, then it give that error message.
Has anyone got any ideas on where I should get started?
Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

Damon,
you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
regarding performance
In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near

Hi,
I am currently receiving the following error in BI Answers when I run a query against a Microsoft SQL 2005 Server.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT 0 s_0, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."Id" s_1, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."UserName" s_2 FROM "SD&A_Dashboard_Test" WHERE ("BORIS_ALIAS_ETMS_Users"."UserName" = 'trowe') FETCH FIRST 65001 ROWS ONLY
I am able to connect successfully to the Data Source and run a query against the database using the NQCMD command line tool so believe I have configured the DataDirect 7.0.1 drivers correctly, also I am able to view the Table Data in the RPD Physical Layer in the BI Administration Tool. So don't understand why I am getting this error.
I have also activated the nquery.log but that doesn't really give me any further information.
[2015-04-28T16:37:22.000+00:00] [OracleBIServerComponent] [TRACE:4] [USER-34] [] [ecid: 4a9e440f990ba0a4:-1995d2c5:14d00d3ef04:-8000-00000000000001c6,0:1:1:5] [tid: 5f] [requestid: 6f11000b] [sessionid: 6f110000] [username: borisdev] -------------------- Query Status: [nQSError: 16002] Cannot obtain number of columns for the query result. [[
[nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'..
[nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared..
[nQSError: 43119] Query Failed:
I was wondering if anyone could shed any light on what could possibly be causing the [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. error ? And also provide any suggestions on how I can troubleshoot this issue further as I am now completely out of ideas of what to do next having tried numerous things i.e. setting IDENTIFIER_QUOTE_CHAR = '' in DBFeatures.INI which I found in similar posts on the subject all to no avail
Regards,
Tom Rowe

Hi Rajagopal,
Thanks for your reply after doing some further investigations this morning I found and corrected the problem...
The DataDirect Driver does not like double quotes in the query for some reason, testing using the BI Answers generated SQL with the nqcmd tool below...
With double quotes “” it fails immediately
Give SQL Statement: select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'Id'.
Statement execute failed
With double quotes removed for just the columns I now get the Error near ‘ETMS_Users’ which still had the double quotes
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'ETMS_Users'.
Statement execute failed
With all double quotes removed it works !
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
c1 c2
42499 trowe
Row count: 1
Give SQL Statement:
The solution to fix the problem is...
In the BI Admin Tool Physical Layer Database, Properties Features tab is to delete the double quote in the Value column for IDENTIFIER_QUOTE_CHAR, setting this in the DBFeatures.INI file does not resolve the problem possibly it did in earlier versions of the product.
Regards,
Tom Rowe

How to trap 1843 error. .nOT Valid month..

This is in my cursor for loop
mstart_issue := TO_CHAR(to_date(mstart_issue,'YY-MON'),'Mon.YYYY') ;
               mend_issue := to_char(to_date(mend_issue,'YY-MON'),'Mon.YYYY');
But it throws 1843 error..
i Have execptions for finding value error like
when value_error then
warn('value error'||moldmembership);
But i need something to trap the following error ie ..The moment not a valid month error occurs. .It should trap that error
Like warn('not validm onth'||membershpnumber)
What shall be the exeption to catch . .the 1843 error...
Like we got exceptions like when too many rows to catch duplicate records..
And this is how my end_issue data looks like .. . 10-jul
12-Aug date in yy-mon format..
But seems there is error..
Kindly help..
Thanks

susf wrote:
Hi Thanks i am implementing both part of code.. Thanks ..
But ..When i use nls_date_language= 'AMERICAN' I see the output of date in some other language in sql
The output is like this..
Loka .2010
Loka .2010
Loka .2010
Loka .2010
Loka .2010
Loka .2010
Loka .2010
Marras.2010
Marras.2010
Marras.2010which line below generates the output above?
Here is the part of my code
declare
msno sub.sno%type;
e;
mSTART_ISSUE sub.start_issue%type;
MEND_ISSUE SUB.END_ISSUE%TYPE;
MCOMMENTS SUB.COMMENTS%TYPE;
MPCODE SUB.POSTCODE%TYPE;
mpay_mode sub.pay_mode%type;
mrmember sub.rmember%type;
mflag varchar2(1);
cursor c1 is select * from htmldb_collections     where collection_name = 'CSV_DATA' and c001 != 'SNO';
invalid_month exception;
pragma exception_init( invalid_month, -1843 );
begin
mflag := 'N';
          FOR XXX IN C1
               LOOP
               begin
mrmember := xxx.c023;
mstart_issue := xxx.c019;
mend_issue := xxx.c020;
               BEGIN
IF SUBSTR ( UPPER (mstart_issue)
     , -3
     ) IN ( 'JAN', 'FEB', 'MAR'
          , 'APR', 'MAY', 'JUN'
          , 'JUL', 'AUG', 'SEP'
          , 'OCT', 'NOV', 'DEC'
THEN
     MSTART_ISSUE := TO_CHAR(to_date(mstart_issue,'YY-MON','NLS_DATE_LANGUAGE=AMERICAN'),'Mon.YYYY') ;
mflag := 'Y';
ELSE
     warn('not valid month startissue ' || moldmembership);
mflag := 'N';
END IF;
IF SUBSTR ( UPPER (mend_issue)
     , -3
     ) IN ( 'JAN', 'FEB', 'MAR'
          , 'APR', 'MAY', 'JUN'
          , 'JUL', 'AUG', 'SEP'
          , 'OCT', 'NOV', 'DEC'
THEN
     mend_issue := to_char(to_date(mend_issue,'YY-MON','NLS_DATE_LANGUAGE=AMERICAN'),'Mon.YYYY');
mflag := 'Y';
ELSE
     warn('not valid month endissue ' || moldmembership);
mflag := 'N';
END IF;
exception
when invalid_month then
warn('EXCEPTIONnot valid month xx ' || moldmembership);
END;
IF mflag = 'Y' then
               insert into sub (sno,rno,designation,old,start_issue,end_issue,comments,pay_mode,rmember)
               values
               (msno,mrno,mdesignation,moldmem e,maddressedas,madd1,
               madd2,mcounty,mcity,mstate,mcountry,mph_no,memail,mpostcode,mstart_issue,mend_issue,mco );
end if;
exception
when value_error then
warn('value error'||moldmembership);
          end;
END LOOP;
END;

SQL Server Agent - [165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]

Hi,
I keep receiving the error below in the SQL Server Agent Error Log;
[165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
It is occurring approximately 20 times an hour and i cannot link it to any job failures. All jobs on the same SQL instance are working.
The server is a clustered server and there are no errors occuring in the SQL Server error log at the same time. I have attempted to trace using profiler looking for errors and warnings but anything that does occur doesn't seem to correspond to the reported
times of the errors within the sql agent error log.
Please could someone point me where to look next?
Many thanks.

Please may I add that this is on a SQL Server 2008 R2 Enterprise edition patched to 10.50.1600.
Nah, that server is not patched at all, because 10.50.1600 is the RTM version. Find Service Pack 2 and install at the next maintenance window, after having performed tests according to your local policy.
It is not going to resolve your particular problem though.
It seems like you have a job that attempts to a connect to s server that is down or non-existing. The job may be configured to return success also on failures. I would check if there are jobs that target other servers.
Erland Sommarskog, SQL Server MVP, [email protected]

OLE DB error: OLE DB or ODBC error: %1 is not a valid Win32 application

Hi,
I am creating the Cubes with couple of dimensions. My backend is Oracle. I can able to deploy the cube in my local machine which is running 32 Bit Windoes 7 OS. But when I try to deploy the cube in another server which is running Windows 2003 R2 64 bit OS,
returns "OLE DB error: OLE DB or ODBC error: %1 is not a valid Win32 application" this error. The driver whic I am using to connect the Oracel DB is "Native OLE DB\Oracle Provider for OLE DB". I have also installed the Oracle 10g 32 bit client in my machine.
Any solution for this issue?
Thanks,
Jeen

Hi Jeen,
What's the specific version of your SQL Server? Please try to install the latest Service Pack on 64bit box to see if this help.
How to obtain the latest service pack for SQL Server 2005:
http://support.microsoft.com/kb/913089
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Trap odbc errors

Similar Messages

Maybe you are looking for