ODBC error occurred while executing SQLExtendedFetch to retrieve the result

Good morning everyone,
I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
It's taking around 2,5 minutes to run, then it give that error message.
Has anyone got any ideas on where I should get started?
Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

Damon,
you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
regarding performance
In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

Similar Messages

  • An error occurred while executing batch. Error message is: There is not enough space on the disk.

    Hello all,
    I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
    The error message is :
    An error occurred while executing batch. Error message is: There is not enough space on the disk.
    Who can tell me the reason and waht's the steps to solve this issue ?
    Really thanks.
    Thanks, Jed deng

    The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
    but I seem to recall that the files appear in you %TEMP% directory.
    I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
    - Chintak (My Blog)

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

    I'm installing the SCSM2012 Management Server
    component on a SQL dev box.  During the installation, the very last step (Import Management Packs) fails with this error:
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    I've already verified that the account I'm logged in with has SA access to the SQL database.  Windows 2008 R2 firewall is turned off.....
    Has anybody else run into this problem?

    I don't see anything indicative in the setup log.  The setup seems to get all the way to the part where it installs the management packs.  Then right after that is when the installation fails and it rolls back.
    From the setup log, towards the end:
    Property(S): ACTIONSUSER = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN = NT AUTHORITY
    Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
    Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
    Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
    MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
    MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
    1603.
    MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
    MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
    MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
    MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
    === Logging stopped: 11/7/2011  17:33:22 ===
    MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
    MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
    MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
    MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
    === Verbose logging stopped: 11/7/2011  17:33:23 ===

  • XL reporter error occurred while executing report! Rows: 25203 Columns: 30

    An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
    One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

    Hello  pls
    follow below procedure
    start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
    regards
    Jenny

  • An error occurred while executing a custom action:_PopulateUserRoles

    I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
    the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

    After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The  error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
    error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
    These are the steps (I had to create the DWORD 32 bit):
    Click Start, click Run, type regedit, and then click
    OK.
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    In the right pane, locate the ServicesPipeTimeout entry.
    Note  If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
    On the Edit menu, point to
    New, and then click DWORD Value.
    Type ServicesPipeTimeout, and then press ENTER.
    Right-click ServicesPipeTimeout, and then click Modify.
    Click Decimal, type 60000, and then click
    OK.
    This value represents the time in milliseconds before a service times out.
    Restart the computer.
    Hope this helps!
    BR,
    Robert
    Robert

  • Error occured while executing Matlab script

    Hello!
    I want to run a Matlab script under LabVIEW, but there is always
    a error message which says "Error occured while executing script".
    Should I install Matlab on the same computer at first? if yes, do
    I need to configure Matlab under LabVIEW?
    Thanks!
    Le

    Yes No
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705

  • Error occurred while Executing XL report

    Hi,
    I am getting the following error when i generate the XL report
    <b>An error occurred while Executing report!
    Description: Can't show non-modal form when modal form is displayed</b>
    Regards,
    Aravindhan.R

    Hi!
    You are probably editing a cell, if you exit the cell you are standing in (editing) the report should run properly

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • An error occurred while creating a subprocess in the processing server.

    Hi,
    I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
    An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
    Did anyone face similar issue? Is there any resolution for the same.?
    I have deleted the report from enterprise and saved it back, still facing this problem.
    Appreciate your help in this regard.
    Thanks
    Ravi

    Crystal Reports processing (CR Page) server is not operational.
    There could be many reasons for this.
    CR processing server traces will need to be enabled and analysed by support.
    You should also be on the latest patch release.
    Sometimes following steps help :
    1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
    2) Once all processes are stopped ensure the serverpids directory is empty
    <install dir>/bobje/serverpids/
    If any files are within the 'serverpids' folder, remove them.
    3) Go to bobje/tmp
    Remove any MW, .MW, mw, .mw and regss files and/or directories
    4) Go to /tmp
    Remove any MW, .MW, mw, .mw, and regss files and/or directories
    5) start servers back up.
    If this doesn't help - you'll need to open a Support Incident

  • An error occurred while applying SQL script for the feature BackendStore.

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Please check you have enough disk space for the disk where the folders are.
    Check view log for detailed log information.
    The following link is a similar thread for you to refer:
    http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
    Lisa Zheng
    TechNet Community Support

  • Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

    ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
    MESSAGE, READS  a network error occured while attempting to read from the file  C:WINDOWS\installer\iTunes.msi

    All sorted now just needed to repair itunes from control panel

  • A network error occurred while accessing this document on the internet

    Dear all,
    I am now facing a very unusual problem that, when I try to open a pdf file from internet, it says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?". Here's my situation:
    Browser: IE8 (or Chrome 35.0.1916.153)
    Adobe Reader: 11.0.0
    OS: Win7
    1.Directly open from IE. Says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?"
    2.Try to download(Save AS). In IE, says: "The connection was reset The connection to the server was reset while the page was loading"; In Chrome, nothing happened, but still can't download.
    3.Try to disable the "PDF Reader Addon" in IE8. First the browser needs to download the PDF file, but failed, see point 2.
    1.I can open the same PDF file from another network, that is, out of my company.
    2.I can open another PDF file in the network of my company, but the pdf is created by another scanner
    3.All PDFs from both scanner can be opened locally.
    So, here's the possible problem, the network settings, and(or) the PDF. Does anyone ever meet this situation, please help?
    Thank very much.
    Li

    Rave,
    IE: 8 & 9
    Adobe Acrobat Pro/Acrobat Reader 10.x & 11.x
    Chrome: work fine
    So the answer is to manually enable and disable websites based on whether the pdfs open within the browser.  That doesn't seem like a great long-term solution to have have our users to manually enable / disable browser integration.  We have web applications that work better with browser integration turned on.  Is this something that Adobe will fix or is it an IIS/IE issue.
    It appears the Adobe removed the #1 config option that you lised in the new 11.x versions of both products.  The manage Add-ons does not disable the browser integration on the new Adobe versions.

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

Maybe you are looking for