TreeTable with different Root

Hi all,
i search in the forum but i can't found.
I need to have a treeTable with different root.
All the exaples that i found didn't explain how to make this!
Someone can help me?
i.e.
RootA
|___rrrrrrrr
| |___ xxx
| |___yyy
|____dddddd
RootB
|___dddd
|___ www
|___kkk
It's look like to see the folders without a ROOT master.
Thank's a lot!
Riccardo

Hi,
>>they are not being authorized because the user groups cannot be assigned. This is because the user cannot be found in LDAP/AD for forestA.
How did we configure the DNS resolution between the two forests? Here, we can check event logs in Event Viewer to see if some related events were logged.
Regarding how to accessing resources across forest, the following articles can be referred to as reference.
Accessing Resources across forest and achieve Single Sign ON (Part1)
http://blogs.technet.com/b/mir/archive/2011/06/12/accessing-resources-across-forest-and-achieve-single-sign-on-part1.aspx
Accessing resources across forests
https://technet.microsoft.com/en-us/library/cc772808(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

A second user called root with different UID after install

After installing Mavericks, I noticed that sudo didn't work properly. I investigated it for a while and then noticed that sudo was running as a user called 'root' but with different uid (217, not 0). Now, is it possible that Mavericks installation has created this second root user incorrectly? Or should I fear that my laptop was compromised before, attacker had somehow been able to create a second root user, and OS upgrade just exposed the problem.
I was able to circumvent the problem by renaming the second 'root' user with dscl, but I still would like to understand the root cause (pun intended) of the problem.

~/Library is probably the one you don't want to move back because it may bring the issues back along with it.
All your own data you can drag & drop. You can drag the contents of any folder Movies, Music, Pictures, Documents (or as much as you want).
Rather than try to replace the Library you can take ~/Library/Application Support, Mail, Safari and any other folders you need.
To access your hidden ~/Library folder go to your Finder "Go" menu hold the option key to choose "Library".
Then you can drag it to the Sidebar for easy access.

Install many executable on the same PC with different names

Hello,
I'm trying to install several executables with different names in the same computer but at the end of install process the message is : "an higher or existing version is already installed in this computer"
I create the Executable and Setup with LabVIEW Application Builder and install the executable in the same Program Files root directory with a different sub-directory for each executable as this : Program Files-->MyProject-->SubProjet1 with exe1/SubProject2 with exe2 etc...
My OS is WinXP pro SP2 and I work with LabVIEW 8.5.
Thanks and regards,
Armindo PINTO

Hi Armindo,
Thank you for using the NI forums!
From what I understand, you are trying to create multiple executables of a vi project to co-exist on the same PC. Any time you re-use the LabView 8.x project file, it will generate
install package with the same product ID number. That means, if the
deployed PC has the previous version installed, which had been
generated from the same project file, the new install package will
remove the previous version and overwrite it with the new version. Or as in your case, not allow you to install lower versions of the executable. That
means, the previous version will be no longer available on the deployed
PC. If you are creating an upgraded version to the product this is
fine.
However, if you need to re-use the LabView 8.x project
file and generate a new product, which can potentially co-exist with
the previous on the end user PC, you need to generate a new installer
with a different product ID number. One of the way to do it:
Copy existing project file (e.g. "name1.lvproj") under a different name (e.g. "name2.lvproj")
Open the new instance of the project
Expand the "Build Specifications"
Right click on the installer specification, e.g. "name1 Installer"
Select "Duplicate" from the menu
You can now delete the instance "name1 Installer" and rename the "Copy of name1 Installer" to a suitable name, e.g. "name2 Installer"
Make changes that are needed between the two versions, for example:
Select a new source VI
Build a new exe file
Reflect the new exe file in the "name2 Installer"
Make
any other changes needed in "name2 Installer", for example different
documentation files included in install, change in the target install
directories, changes in the start menu shortcuts. etc.
Build the install.
Please let me know if this solves the issue, and let me know how you get on.
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK

How do I get and set column attributes in a table or a treetable with Java?

Using 11.1.1.4.0
Hi,
How do I get and set column attributes in a table or a treetable with Java? For a simple example, say I have a table and want certain roles to see all columns (including address), and other roles can see only certain columns (no address). In a Java method, I want to test if a table's column visible attribute is true and if so, set it to false before rendering it.
Thanks in advance,
Troy

Hi,
this use case would be a perfect example for using seeded MDS customization. Instead of checking what users are allowed to see or not upon rendering time, you have a customization class and thus the framework doing this for you.
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/31-mds-sample-169173.pdf
In this paper and sample, specific users see different layouts. It also contains a customization class that shows how this can leverage ADF Security
Frank

VMM 2012 sp1: unable to create a logical switch on team with different nics (bug?)

Hyper-V Host is HP Proliant G7 with 4 onboard nics and additional (different) 4-port adapter, all 1Gbit. Server 2012 with latest updates.
VMM 2012 is sp1 with latest updates, server 2012 running in a vm.
When I create a logical switch with teamed uplink port profile in VMM, the job builds the team but fails to create the vswitch when ports from both onboard nics and adapter is used.
I am able to create a vswitch manually on the team if I do it directly on the host.
If the team is created on either purely onboard nics or purely adapter nics, the logical switch creation succeeds.
In short terms: I am able to create a vswitch based on a server 2012 team with different nics, but not a logical switch. Why?

I have tried assigning both nics in one step, and one by one. When I create the logical switch team with only one nic it succeeds, but then fails when I add the second (unless it is similar to the first).
Error in VMM is
Error (2912)
An internal error has occurred trying to contact the dkfuzhv01.mia.local server: : .
WinRM: URL: [http://dkfuzhv01.mia.local:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/scvmm/ErrorInfo?ID=1010]
Unknown error (0x80041001)
Recommended Action
Check that WS-Management service is installed and running on server dkfuzhv01.mia.local. For more information use the command "winrm helpmsg hresult". If dkfuzhv01.mia.local is a host/library/update server or a PXE server role then ensure that
VMM agent is installed and running.
If I add the second non-similar team member from the host itself, I get this error from nic teaming wizard
Validation failed and changes to the system are rolled back
It is not a question of losing connection (been there), management interface is on a different team. And it also fails when second team member is added directly on the host...
So far I will stick to the conclusion that my problem is with logical switch and different nics :)
Oh, by the way nics are HP NC382i (Broadcom) and NC365T (Intel)

SharePoint 2010 - Create new site collection in existing web application with different existing content DB

I have a SharePoint 2010 root level site collection SC1 in web application WEBAPP1. I want to create copy of that site collection in same web application WEBAPP1. Apart from Import/Export, Restore/Backup options, will following approach work? If yes , how?
I took backup of content database of web application.
Restored database with different name
Mounted Content database to this WEBAPP1 by assigning new ID to DB
Created new site collection by using this newly mounted DB
Site collection gets created successfully but content does not appear.
Please guide if i can achieve desired functionality by using this approach.
If this helped you resolve your issue, please mark it Answered

It is because the Site GUID is identical, and each GUID can only be present on the farm once. You can use Backup-SPSite/Restore-SPSite (which is full-fidelity, unlike Export-SPWeb/Import-SPWeb), which will generate a new GUID for the restore Site Collection,
even in the same Web App.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Multiple groups with different permissions on a sharepoint

Let me start by saying that I am fiarly new to OS X Server. In my school district we are running server 10.3.3, and I am having one heck of a time trying to figure out how to give access to a sharepoint to more than one group, and give them different access ie: the students have the ability to read what is in the folder, but the teachers can put things in there or make changes to the items in there, the main reason we are trying to get this done is for our accounting department. The ladies in the accounting office need to share some documents with the office managers at the different schools, but don't want them accidentally changing them, and we don't want anyone/everyone to be able to access them.
If there are any free updates available that can fix this I would be willing to download them, but I don't think we have the money to upgrade to 10.4 server.

As you surmised, all the tools to make this easy are in 10.4 (ACLs, nested groups etc...)
Since you need a solution that works with 10.3.3, Id try the following:
A = accounting office users
B = office mangers
C = all users in A + all users in B
Folder 1 is the folder of shared documents.
Volume 1 is the sharepoint containing Folder 1
in WGM
share Volume 1, with Owner: root R/W Group: C R/W Everyone: none
Set the privs on Folder 1 to Owner: root R/W Group: A R/W Everyone: R
This allows members of group C to mount the volume , but only the accounting folks (A) can write to the files in Folder 1. All other users (the folks in group B) will only have read access to folder 1. The public at large won't be able to mount the volume in the first place.
Hope this makes sense
- Leland

Restarting a failed admin server on another machine with different IP

Hi,
I'm trying to restart a failed admin server on another machine with different IP on Weblogic Server 10gR3. After copying the domain config to another server, the admin server can be started without any problem, but it cannot contact the managed server until the managed server is rebooted.
The behavior contradicts the documentation, http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1064112, that says Running MSs will learn the new AS address when they are contacted by the AS after it has been started. It does not mention the managed servers need to be rebooted.
did I do anything wrong? Your help would be much appreciated.
Thanks a lot,
Andreas

Hi,
What ever you said is true. If the IP Address of Admin Server is changed, then Managed Server must connect to Admin Server after "ReconnectIntervalSecs" . If the IP address is not moved then Admin Server Should contact Managed Server automatically.
Can you provide details steps you had performed, so that we can identify the root cause of the issue.
Thanks.
Vijay Bheemineni.

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do?

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do? I spent 6 hours on the pic and I dont even have a screenshot or anything.

You don't even say what platform you are on, or any other details that may help others assist you.
If you are on a Mac, try opening your file in GraphicConverter (they have a demo version) if that doesn't open it, nothing will, in my experience.
I assume you have tried Adobe Illustrator already to recover.
You may also have a JPEG of your complete file (flattened) in Bridge Cache.
On the Mac you'd find it in your User ~Library (NOT the Root Library ):
Users > yourname > Library > Caches > Adobe > Bridge CS6 > Cache > 1024 > jpg(fileID)number Filename.psd.jpg
The user ~Library is hidden, but you can make it visible for an moment or two. Ask Apple if you don't know how.
I don't do Windows.

IHC Cash concentration Account Hierarchy with different currencies - F9H1

Hello Experts,
Can someone please help me find out if it In Tcode: F9H1/F9H2, it is possible to create an account hierarchy with sub account in different currency than the Root account?
I am getting the following error when I try to create an account hierarchy with different currencies in root account(USD account) and subaccount(GBP account)
"Account XXXXGBPYYYY / GBP cannot be inserted; Currency not possible"
Is this a system limitation or are we missing some configuration?
Please advice

Hi Anya,
In the new version of IHC, which is available from EA-FINSERV 500 onwards, the cash concentration process generates 2 payment orders -
1. BCA payment order ( or the OLD IHC payment order - can be viewed via F9I3)
2. IHC payment order (or the payment order created in the new version - can be viewed via IHC0)
This happens only when you configure the module IHC_BCA_EXTERNAL_PAYMENT in the BTE 10310 for application IHC.
This would then call the new version of IHC and post a payment order which you can view from tcode IHC0.
If instead of module IHC_BCA_EXTERNAL_PAYMENT, another module PAYMENT_EXTERN_IHC is configured in the BTE 10310 then it would look for an entry in the table TBKKIHB4 to create a PAYRQ (treated as external payment). And, on finding the table empty, it throws the error message as mentioned by you.
Hope this helps!
Best regards,
Sidhartha

How to load and unload same SWF with different xmlFilePath?

I have a slideshow on my homepage and try to load and unload same instance with different xmlFilePath based on language on the same page.
var flashvars = {
        xmlFilePath: escape("http://www.bodto.com.tr/kik.aspx"),
        xmlFileType: "OPML",
        lang: swfobject.getQueryParamValue("lang")
        //initialURL: escape(document.location)
      var params = {
        bgcolor: "#000000",
        allowfullscreen: "true",
        wmode:"transparent",
        allowScriptAccess: "always"
      var attributes = {}
          swfobject.embedSWF("/swf/slideshowpro.swf", "flashcontent", "550", "400", "10.0.0", false, flashvars, params, attributes);
Actionscript3
var langPath = root.LoaderInfo.parameters["xmlFilePath"]+root.LoaderInfo.parameters["lang"];
my_ssp.xmlFilePath = langPath;
var fileType = root.LoaderInfo.parameters["xmlFileType"];
my_ssp.xmlFileType = fileType;
Based on above informations, how could I achieve it?

Suddenly that code in the following gives me some error
var langPath = root.LoaderInfo.parameters["xmlFilePath"]+root.LoaderInfo.parameters["lang"];
my_ssp.xmlFilePath = langPath;
var fileType = root.LoaderInfo.parameters["xmlFileType"];
my_ssp.xmlFileType = fileType;
Access of possibly undefined property LoaderInfo through a reference with static type flash.display:DisplayObject.
The only code snippet works is
var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters;
for (var param in paramObj) {
   if (param == "xmlFilePath") {
      my_ssp.xmlFilePath = paramObj[param];
   if (param == "xmlFileType") {
      my_ssp.xmlFileType = paramObj[param];

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

How can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

how can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

One way would be to e-mail them from yourself to yourself. That would totally avoid the different ID issue.

How to backup multiple iphones with different iCloud accounts but same apple id?

I would like to back up 3 idevices each with different icloud accounts to itunes. But they use the same apple id so that itune purchases can be installed on each device (2 iphones and 1 ipad).
All I want to do is create a backup in case the phones need to be restored. I also want to back up before downloading iOS 8.
The Macbook Pro that I will back up to has one user and one itunes library.
Is this possible without mixing up address books and contacts etc? Appreciate if some one could direct me to detail step-by-step instructions if they exist or please tell me how I can do this.
Thanks.

With Family Sharing they don't need to have the same Apple ID anymore.
But backups to iTunes are kept separate among multiple devices; Apple ID and iCloud isn't involved at all. Just make sure the devices do not have the same name.

How to back up multiple iphones/ipads with different icloud accounts but same apple id

I would like to back up 3 idevices each with different icloud accounts to itunes. But they use the same apple id so that itune purchases can be installed on each device (2 iphones and 1 ipad).
All I want to do is create a backup in case the phones need to be restored. I also want to back up before downloading iOS 8.
The Macbook Pro that I will back up to has one user and one itunes library.
Is this possible without mixing up address books and contacts etc? Appreciate if some one could direct me to detail step-by-step instructions if they exist or please tell me how I can do this.
Thanks.

With Family Sharing they don't need to have the same Apple ID anymore.
But backups to iTunes are kept separate among multiple devices; Apple ID and iCloud isn't involved at all. Just make sure the devices do not have the same name.

TreeTable with different Root

Similar Messages

Maybe you are looking for