Treo 755p The free data storage space on the device is low. Some data could not be saved

After having the Treo 755p device for only a week, I am receiving a message "The free data storage space on the device is low. Some data could not be saved." I have over 55 mb of free space according to the device info page. I cannot find anything about this in the knowledge library, can anyone offer help?
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

My problems are similar to Lauren, but backwards. For months now I have had problems with my Treo 755 reseting randomly. Sometimes during calls, sometimes while typing, sometimes while just sitting in the holster. As many as a dozen a day and then not at all for 2 weeks, no rhyme nor reason. This Free Space error though is brand new to me today and quite strange. The error is showing up when I bring my phone out of "sleep". I press the end button to sleep the phone and everything is fine. When I press it again to wake the phone up the error is sitting behind the keylock waiting for me.
Obviously I have done nothing yet for this new memory error, but I've tried everything for the reseting. Deleting software, Soft and hard resets, software updates, everything I and Sprint support can think of. With this new Free space error now I am going to just take it to a service center and demand a new phone. I think there is some kind of hardware error as I have done nothing in the programming. No new programs, no deleted programs, no changed settings.
I loved my Treo 650 and never had any problems with it. I am getting very disappointed in Palm now though with these ridiculous problems.
Post relates to: Treo 755p (Sprint)

Similar Messages

The data could not be saved because the server could not be contacted - Error

Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
The operation has timed out.
I verify the database, the record is saved but the application show me the error.
Please help me I have to deliver this screens today.
Thanks!
Boanerges. Mr 3: 17

Hi Elmer,
I researched this error message, I think you can try the methods below:
Increase the timeout of the connection between the client and the server
Increase Client timeout, and it is set in the Application class in the Client Project
For further information: Error message: Unable to save data

LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

Hi:
I have a very simple test LS App:
1 Table "Person" with 1 property "Name"
One totally standard Editable Grid
So no complicated calculations that could timed out...
When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
Despite the error the data gets persisted on the database.
I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

If you decide to try again I would:
1) Uninstall Visual Studio
2) Uninstall SQL Server (all versions)
3) Re-install SQL Server
4) Re-Install Visual Studio
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

"the document.....could not be saved"

I just started receiving this error message on one song. "the document.....could not be saved"
If I closed down everything and restarted i could then save the project. Now it won't even do that and it has spread to another song/project, with even more messages (Minor Problem in Data, Score Style Fixed, Error-Csong::CreateSeq-Illegal Block Size) the prject then opens up but there are no regions or tracks in the arrange window. These projects are very basic audio files (WAV) and few plug-ins, basic rock and roll songs.
These projects are being run at 96. I never received this info on projects at 44.1 or 48. All of your suggestions would be appreciated. Thanks, jdf

Whenever I had that error message (in Logic 32bit mode) it was a virtual memory issue. I seemed that memory was so tied that moment that it didn't have the necessary bits to perform the save process. When I tried to free up memory by closing all but one window or unload some plugins the save process went through.
Just make sure to write down the plugins that you unloaded so you can reload them when open up the project.
Quick Tip:
Always have the Activity Monitor open and keep an eye on the available memory space. If you do a lot of loading and unloading of sounds, Logic's memory and the available memory on your machine in general gets very fragmented because OSX keeps stuff in RAM just in case (Inactive Memory). Restart the machine once in a while to flush out all those leftovers.

Getting error: The document [document title was here] could not be saved."

I am getting this error when trying to save a Numbers spreadsheet:
"The document (document title was here) could not be saved."
I created this spreadsheet from scratch in the numbers format, and I have been using it for several weeks now.
When I 'get info' on the file and look at the file permissions, I see that my user has read and write access to the file. It is in the /Users/Shared directory as I share it with others on this computer. No other users are logged in, therefore the file is only open by me.
I have already tried restarting the computer, and that didn't work.
Any help would be greatly appreciated with this! I think others on this forum may have had a similar problem but they were blaming it on opening the file over a network. In my case as you can see, it is all local to my computer.

Thanks for the suggestions. I tried all three and unfortunately the problems just got worse until the file would not open at all
I had to restore from time machine from yesterday, then save as a different file. This allows me to edit the copy, but as soon as I try to edit it as a different use I go back to the same old problems again, even if the user has read & write permissions on the file and the directory the file is in.

Error message - "The iTunes Library file is full could not be saved" - Help

Hi folks.
I looked for current / recent chatter on this iss before creating this topic. Didn't see anything that addressed this issued recently. If I missed it, sorry, if not, here you go!
I got an error message last night while using iTunes. It just popped up during use, not while using. The error message read "The iTunes Library File could not be saved." Now my hard drive is DEFINITELY not full. I have hundreds of gigs of unused space. This appears to be an issue strictly related to my library.xml file. Stupidly, I clicked the don't show me this again and closed the message. My concern now is that I'll rip new content that won't end up in my iTunes library even though it's on my hard drive, thus that content will not be findable by iTunes.
I don't want to just rebuild the library from scratch as I have fixed tons of errors in how iTunes classifies my music over the years and all that work would be lost.
Any ideas on how to get past this glitch?
I noticed this problem also cropped up circa the original iPhone launch. I had that phone and did not experience this prob, and I just upgraded to the 3G four days ago. It makes no sense to me that the phone is causing this, but perhaps the upgrade to the iTunes version 7.7 (necessary to use the iPhone with my Windows computer) is the cause of the prob.
I did erase a bunch of videos and unsubscribed to several video casts. That was one recommended solution way back when.
My concern though is that since I chose the don't show me this error message again option, I won't know whether the problem persists or not.
Oh the humanity...

I have seen this a few times, usually when other 3rd-party applications are using itunes. Such as, lastfm & the Tivo remote music player.
And, I've also seen it when I was copying a bunch of digital photos to the exHD in the background while playing music and the song changed. iTunes saves the playcount in the ITL file when the song ends.
You might check this Microsoft article about "Enable write caching on the disk". I haven't seen that iTunes error since I turned mine back on for the exHD. The Tivo "delayed write failed" errors are back, but that's a different problem...
http://support.microsoft.com/default.aspx?scid=kb;EN-US;330174
Anyway, long story short, it gets saved OK later and I make frequent backups of that ITL file.

When I tried to update, I got this message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator" What do I do???

I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]

I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Numbers spread sheets. 'The document could not be saved. Permission denied'

Since updating to OS X Lion 10.7.2 I'm unable to save my Numbers spread sheets. I keep getting a message that says 'The document “Autumn Menu 2011.numbers” could not be saved. Permission denied'.

i,
It's always a good idea to Repair Permissions after an upgrade. You can use Disk Utility.app, which you already have on your OSX system, or you can download a utility like ONYX.
Always wise to run your backup utility before doing the repair.
Regards,
Jerry

HT1766 How to send videos from ipad air to the cloud to free up storage space on ipad

How do I send videos from ipad air to the cloud to free up storage space on ipad?

I had a similar/same problem - when I deleted the video locally, it did not appear as a Cloud video.
To solve this, I deleted it locally, signed out of iCloud, powered of the iPad, powered back on, opened videos (empty), signed back into iCloud.
Now all my videos are present in the cloud, and none locally.
Not a great UX though

Why do we not receive 5 gb of free cloud storage space for the multiple Apple devices my wife and I have purchased?

Why do we not receive 5 gb of free cloud storage space for the multiple Apple devices my wife and I have purchased? Seems only fair.

logical. fair. I can understand the confusion in policy as another fine cloud service - DropBox - has a different model for increases in free storage amounts for one account = evangelism. As many policies as there are services probably.
cya 'round o' kilted one
CCC

I have one icloud acount with my phone and ipad on it. I want to make a new ipad account so I can free up storage space on my phone and put the ipad on its own ipad account

I have one Icloud account for my iPhone 6 plus and my ipad. I have no stoage left. So if I set up an Icloud account for the ipad it will have its own storage then I can take it off and open up some storage on my phone.

In case you're not clear - iPad/iPhone storage, and iCloud storage, are totally separate. Buying more iCloud storage does not give you more storage space on your device. Your device has a fixed storage space for apps and data (e.g., 16GB - which is more like 12GB in real terms). iCloud storage just allows you to store more documents, mail, photos, etc, in the cloud.
Matt

How do I free up storage space on a Macbook air?

How do I free up storage space on a Macbook air? My e-mail seems to be taking up the most space?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Restart and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

HT4759 How do I move photos from my Iphone to my PC to free up storage space?

How do I move photos from my Iphone to my PC to free up storage space?

You can connect your iPhone to your computer and your computer will see your iPhone as though it was a digital camera. You'll be given options to transfer pictures just as you would a digital camera. I'd create a folder in advance and maybe call it iPhone Pictures. Transfer the pictures, then you can delete them from you iPhone. You can always redownload them to your iPhone via iTunes sync.

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

Treo 755p The free data storage space on the device is low. Some data could not be saved

Similar Messages

Maybe you are looking for