Treo700w syncing to groupwise 6.5 issue

my new user (new Hire) was syncing his treo 700w to Outlook 2003 to get his calander on his laptop and phone with no problem. i changed him to Office 2007 and installed Groupwise 6.5 since we use that here. I used active sync 4.5 and intellisync 6.0 .. the sync is fine but the calander appointments are 1 hr off. like a DST issue. all the ones from the phone are 1 hour early in groupwise and a new one i put in groupwise and syned back to his phone is 1 hour late... all windows updates are done and the phone and laptop have the correct time. help woudl be appreciated... thanks. ....Roy at Univ of South Carolina.
Post relates to: Treo 700w (Verizon)

On Tue, 27 Nov 2007 08:45:22 +0000, Bjrn Kelsen wrote:
> Facing a migration/upgrade scenario from GW 6.5 on NW 6.5 to GW 7 on
> Linux. Now here are the questions:
> I want to install GW 7 on SLES 10 SP1 to facilitate later upgrade to OES2
> - but maybe I should go all out and install on OES2 ?
Keep in mind that while it should work, it hasn't been tested or is it
supported to upgrade a SLES10SP1 server running GW to OES2. If this
server is going to eventually be OES2 anyways, I'd recommend installing
OES2 before installing GW.
> Or conservatively
> stick with OES1 SP1 on SLES 9 because thats proven technology ?
Um, about the only thing proven with OES1 is that it's problematic at best. :-)
Joe Marton
Novell Support Forum SysOp
Novell does not officially monitor these forums!
http://forums.novell.com/

Similar Messages

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

I found this tip from a 2011 discussion on the same topic.
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Import (File -> Import) a new calendar. When prompted, use your notes from Step #1 to select the file your created earlier. Once completed, close the iCal application (you should have all of your calendar entries back.)
Open the iTunes application and connect your Apple iPhone to the computer.
Within the Advanced section of the Info tab for the Apple iPhone, check the box the overwrites/replaces the Calendar data on the Apple iPhone.
Click the Apple/Sync button. New, modified and deleted entries should now be syncing correctly.
That's it! You should be all set and iTunes, iCal and our Apple iPhone should all be playing nicely as friends again. We've used the exact method to repair our own Apple iPhone at least once... maybe even twice.

The artwork on my ipod touch 5th generation became scrambled.It is showing completely different image while i play song.But in itunes everything seems perfect.I tried deleting all albums from itunes,restoring ipod,re-sync ipod,nothing resolved my issue

The artwork on my ipod touch 5th generation became scrambled.It is showing completely different image while i play song.But in itunes everything seems perfect.I tried deleting all albums from itunes,restoring ipod,re-sync ipod,nothing resolved my issue.Please help me

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

7.0 no longer syncs with Groupwise

Unfortunately, I did not realize that GroupWise is no longer compatible with Intellisync when I installed the recent update. I use GroupWise at work and don't have a choice to switch to another supported program. I need to know how I can revert back to the previous version so I can continue to sync my blackberry with my GroupWise calendar.

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, which you will need. Refer to this KB for PIM compatibility:
KB12268Synchronization support for BlackBerry Desktop Software for Windows
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Office 2013 and Groupwise, Address book issues

Having issues with workstations running Win7 and Office 2013. If you open the mail settings under the control panel only the Outlook address book is listed. Frequent contacts doesn't populate either in Groupwise and no address books are listed as available. Any fixes for this? Groupwise 8 running on NW 6.5

Originally Posted by drettagliata
Having issues with workstations running Win7 and Office 2013. If you open the mail settings under the control panel only the Outlook address book is listed. Frequent contacts doesn't populate either in Groupwise and no address books are listed as available. Any fixes for this? Groupwise 8 running on NW 6.5
We have the same problem, aparently is related with outlook. When we uninstalled office 2013, the adress book is listed and works properly.

Calendar won't sync across devices and other issues

Hello all,
I am running latest versions of IOS 8 on IPAD Air2, iPhone5S and latest Yosemite on IMAC intel last year model.
There are few issues here....
In Mavericks when I edited an event in calendars it would show up almost immediately on my phone. No more. In Yosemite I would edit an event and it seems like a 50/50 chance it would RETAIN in the Yosemite calendar. And if it does, it does no sync across devices. This is a pain in my ***.
Second issue is when I use the 'shutdown' feature top left corner of OS X, the unit would begin to shut down then the spinning logo would keep spinning and unit would never shut down. The energy saver would take effect. I come from work thinking it was shut down, press the power button on back and the unit 'wakes' and continues with spinning shutdown logo.
Third issue, my iPhone randomly asks for the iCloud password, even though it is enable across all of my three devices.
Other than these issues I love Yosemite and IOS 8, but these are really kicking me from behind.
I appreciate any and all help!
Thanks

OK, are you sure the events you are adding are added to an icloud calendar, only iCloud calendars will sync. Tap the calendar button to make sure all your calendars are iCloud calendars. Are changes making it to iCloud.com

How to solve issue with strange iphoto events shown in itunes for sync IOS devices ? This issue is very old and not been fixed by apple... terrible

all softwares latest version january 2013.
I see in itunes many strange crazy iphoto events that in iphoto do not exist.
These vents are named as data and contains just few photos.
each event can be sync with IOS devices, but that event is not in iphoto !
It looks like miniatures... no way to solve this issue making all possible maintenance in iphoto library.
THis issue is very old, very terrible, people start to have doubts about iphoto as a reliable software.
Need a fix asap.
Apple please help!
I were with 2 hours at genius bar but nothing.
Genius told me apple have been informed and they are working on a solution..... this 4 months ago !!!
Need solution asap
THanks
Fabio

Apple aren't here. As you're the only person with this problem that I've seen on here, I would suspect that its more a local problem on your machine than something Apple need to fix.
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Call sync BPM from Async BPM - issue

Hi,
Outline: I'm trying to call a synchronous BPM from an asynchronous BPM in a PI 7.0 SP 14 system.
When doing so i get the following error: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed.
Now this is an oldie when searching the forums for this error message. I do however fail to see a solution to the problem.
Note that the following notes (referred to in similar posts)
- 710445
- 718734
- 830803
are implemented since theese refer to older versions of PI.
My scenario is very simple at present since i've startet from scratch again after getting the error. So what i do is:
1) send async message to async BPM
2) async BPM receives request
3) async bpm transform request til sync_request.
4) async BPM calls synchronous BPM
5) sync BPM receives request and opens a async/sync bridge
6) sync BPM maps request to response
7) sync BPM sends response and closes async/sync bridge
8) async BPM reveices sync_response
9) async BPM sends sync_response to some application
Now step 8 i never succesfully executed. Instead the error earlier described is triggered.
For simplicity i use 1 and only 1 message type in all message interfaces. I have mapping between my synchronous interfaces outside of BPM.
The synchronus BPM is executed just fine. The only issue is getting the reponse back to the asynchronous BPM.
I am familiar with the following similar posts:
- Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
- Problem in posting the data in the syncronous mode
but find them to be of no use.
Hope someone can help.
Best Regards,
Daniel

Daniel Hans Engsig-Karup wrote:First you do not need any bridges if it is asyn/sync kind of a scenario in the second BPM. You need a bridge when the bpm has to wait with a sync call coming in and response in an async call. Essentially your BPMs (I donno why you need 2.. but let us go with 2)
>
>
> 1) send async message to async BPM
> 2) async BPM receives request
> 3) async bpm transform request til sync_request.
> 4) async BPM calls synchronous BPM
> 5) sync BPM receives request
(Remove this if you are calling a sync system here) and opens a async/sync bridge
> 6) sync BPM maps request to response
> 7) sync BPM sends response
Remove this and closes async/sync bridge
> 8) async BPM reveices sync_response
> 9) async BPM sends sync_response to some application
>
VJ

Some Photos Not Syncing to iPad 1, but issue is not the photos.

Some Photos Not Syncing: When syncing iPad1 64gb IOS 5.0.1 w/HP desktop, some but not all jpgs sync from a folder. (There is ample free space on the iPad.) The issue is not the photo files as I have verified that the jpg's are all compatible both through Adobe CS5 and by successfully getting the photos to sync to the iPad by making a copy of them and placing this duplicitous copy in a 2nd temporary folder, which then sync's all the jpg's to the iPad just fine. Still, it makes no sense why they won't all sync from the main photo folder.
[Folder structure is: Sync My Photos Folder; Subfolder 1 syncs all; Subfolder 2 syncs some; Subfolder 3 syncs all. But if I add a new Temp Subfolder 2a and copy non-syncing photos in it, then I am able to sync all teh photos.]
This is a very inconvenient situation, and it wastes space on my desktop harddrive as I have to have all the photos in the main folder--not the temp folder--to which they ar assinged. Has anyone else encountered this, and is there an explanation or solution for this issue?
Thanks.
jdb95

Try deleting the photo cache > iTunes: Understanding the iPod Photo Cache folder

Mail and GroupWise set up issues

Hi,
I use GroupWise for my school e-mail. I have been able to set up my gmail with POP on Mail but I keep having issues trying to set up my school's e-mail. I looked up the set up options here:
http://www.newschool.edu/at/help/helpdesk_doc/popmail.html
I did everything that is listed. When setting it up in Mail the incoming server set up works perfectly. But when I try to set up the outgoing server it just keeps telling me it's failing to connect.
Also on a side note I would prefer not to set up the account with IMAP. That's what a friend suggested I try and I did that a couple months ago but I just hated the way it works with Mail and even led to me going back to using just online Gmail. But I did miss the nice interface of Mail so I am trying again to figure this out.
Any help would be great! Thanks

Thanks for the reply.
For some reason 587 didn't allow the incoming server to work. But when I did un-check the SSL in advanced options it automatically put 110 for the port (which I changed at first to 587). After 587 didn't work, I tried 110 out and it seems to be working, but I'm not sure if the outgoing server is working.
Also, for some reason none of the e-mails from the GroupWise server are loading on to Mail.
I've been searching everything (GroupWise options and there Help & FAQ section, all over google, etc.), trying to find a way to enable POP on GroupWise but there isn't any option like that. Maybe I am missing something?
Also at this point even if I enable POP, if my outgoing server doesn't work I will only be able to receive e-mails but not send them, correct?
I really am trying to find some sort of discussion where someone else had the same problem as me, but no such luck. Seems pretty complicated because this should be easy to set up.
Anyway, once again any help at all is greatly appreciated.

Sync iphone and icloud calendar issues

I have the iphone 4s. I have switched to using the icloud calendar because my phone would not sync with my pc. Data entered into the icloud calendar syncs to my iphone, but data entered into my iphone calendar does not sync to my icloud calendar. Can anyone help

Hi KStover05,
Welcome to Apple Support Communities.
It sounds like you're seeing an issue when trying to sync your iPhone. The article linked below describes why those alert messages appear and how to resolve issues related to them.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
I hope this helps.
-Jason

The whole audio sync/weird sample rate/drift issue (FCP6)

I can tell this question is doomed to fail on account of viewing the other unanswered questions on the subject in the forums, but I'll try nonetheless!
So yeah, importing longer DV clips....audio rate winds up being 'weird' (as in 48003.9kHz instead of 48). Any way of straightening that out that doesn't require a buncha hoops? I've already tried re-exporting it from QT at 48kHz and a few other things. Do I just have to capture in separate chunks instead of one big go?
I found a doc that says, "In previous versions of Final Cut Pro, the "Sync Adjust Movies Over [n] Minutes" option could be enabled in the preferences, triggering an adjustment in the audio sample rate based on the amount of audio recorded to disk during capture. In Final Cut Pro 4 [and up, I'm guessing] this preference has been replaced by automatic audio rate analysis, specific to DV media..."
Apparently this rate analysis ain't working as well as it should...or something...
Anyone?
Thanks,
E

If your footage was shot with the Panasonic dvx100 camera, there is a known audio sync issue. You can install a patch from disc 1 of the FCP install discs inside of the "extras" folder. I've had this problem from time to time and I capture DVCPRO 50, so it's not just a mini DV issue. I usually get an audio rate slightly below 48, like 47.89999 or so. Are you using capture now? I used to get this problem a lot more when using capture now as opposed to log and capture. My solution has always been to always use log and capture and keep clips 15 minutes or shorter. I've tried trashing prefs and all that jazz, swapping out hard drives, but log and capture and shorter clip lengths always seem to clear it up.

How can I sync Exchange/GroupWise calendar with Mountain Lion and iOS 6.1?

On my iPhone I have defined the GroupWise server and I'm receiving every calendar events but it doesn't sync to my computer.
Any idea why and how to fix it?

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

GroupWise Mobile Server Issue

Recently our GroupWise Mobile server crashed. It was running on a virtualized Windows 2003 server. In trying to get it rebuilt and functional I have came across 2 issues.
1. When asked to provide (during reinstalling of Intellisync Mobile suite) GroupWise server address to be used along with port 7191 the username and password are returned saying unable to connect. The thing here is that I can use that same username/pw on GroupWise itself and successfully log into e-mail.
2. When I try and access http://10.3.2.6:7191 or http://mail.usd376.com:7191 I get the following error message in my browser.
HTTP/1.1 200 Date: Mon, 25 Oct 2010 10:59:42 GMT Server: NetWare GroupWise POA 8.0.1 Content-Type: text/xml; charset=utf-8 Content-Length: 268 Pragma: no-cache 59905Bad parameter passed to a NCSP function
Suggestions? Thanks in advance!

I'm a little unclear of what you are saying.
To access the SOAP part of the POA, the URL would be:
http://10.3.2.6:7191/soap
Are you saying that is not the case or are you stripping
off the /soap part?
What request are you trying to execute?
I would expect a SOAPAction header as well.
Also is SSL enabled and you are trying to access it without
SSL?
Preston
>>> On Monday, October 25, 2010 at 10:36 AM,
dmantz<[email protected]>
wrote:
> Recently our GroupWise Mobile server crashed. It was running on a
> virtualized Windows 2003 server. In trying to get it rebuilt and
> functional I have came across 2 issues.
>
> 1. When asked to provide (during reinstalling of Intellisync Mobile
> suite) GroupWise server address to be used along with port 7191 the
> username and password are returned saying unable to connect. The thing
> here is that I can use that same username/pw on GroupWise itself and
> successfully log into e‑mail.
>
> 2. When I try and access http://10.3.2.6:7191 or
> http://mail.usd376.com:7191 I get the following error message in my
> browser.
> HTTP/1.1 200 Date: Mon, 25 Oct 2010 10:59:42 GMT Server: NetWare
> GroupWise POA 8.0.1 Content‑Type: text/xml; charset=utf‑8
> Content‑Length: 268 Pragma: no‑cache 59905Bad parameter passed to a
NCSP
> function
>
> Suggestions? Thanks in advance!

Newbie Groupwise (eDirectory) configuration issue

Hi,
I am new to Linux environment, Please help me to resolve the problem.
I have installed Linux Small Business Suite 9 and I want to configure
Groupwise for LAN. I want to use one of the systems as a server so I have
given it static IP address and changed the host name of the system.
I tried to configure the edirectory8.7.3 before Groupwise and it gave an
error NDSconfig failed.
Later on when i tried to configure Groupwise it asks me for a domain name
for which i have given the host name of my system but it doest accept it.
Please help me.
Thanks,
Swapna.

Swapna,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Treo700w syncing to groupwise 6.5 issue

Similar Messages

Maybe you are looking for