TREX command line control

Good day to all.
Can I freeze queue in TREX from command line?
Thanks,
Alexey

The CommandLine tool is also shipped with JCAPS and which is very useful to tool.
We can do deploy, redeploy and undeploy with this tool. and the respective docs are available as said in the above location.

Similar Messages

Is there a way to pass archive file name to the command-line control?

Hi there,
I have been researching the flash media live encoder laterly. But still cannot find confirmed anwsers on the following questions:
1. Is there a way to pass an archive file name to the command-line control when starting an encoder?
2. Can the username/password to the Flash Media Server be saved in the profile? If not, is there any otherway to provide(GUI mode) them automatically,
like as variables to a script?
Thanks a lot in advance.
Helen

1. The only way to inform the command-line encoder about the archive file name is to save the FMLE session profile with the file name. The node for saving the file name is <output><file><path>C:\sample.flv</output></file></path>. The easier way to update the xml profile is to use "Save Profile" option of the GUI mode. If you want to programmatically update the file name, read the profile and update the node before launching the encoder. I hope this answers your question.
2. No. Credentials can't be saved in the profile. The only way to provide them programmatically is to use /ap and /ab commands for the command-line encoder. For GUI mode, there is no programmable option. But still you can try capturing keystrokes.

Command line control of AppleVNC or ARD?

I have a headless G3 running that is running the AppleVNC server and I want to shut it off via ssh. I've misplaced the password and I want to use OSXvnc instead. The problem is it seems that AppleVNC is supervised somehow, so whenever I try to kill it it just starts back up again as a new process; a great feature when you want it, but a pain when you don't.I also have a firewall up so I can't start OSXvnc on port 5901 because that port is blocked (I should learn how to unblock this firewall port on the commandline, but I don't yet and it's a bit off-topic...).
Can someone tell me if there are command-line controls to 1) take down the AppleVNC server or 2) change the password? (subquestion, anyone know a good link to learn about OSX firewalls and the command-line?) I read the documentation and I found networksetup and systemsetup but it appears that these are only for Mac OSX Server and I am just running 10.4 End User.
Nate Murray http://www.natemurray.com

If you want to learn about the command line, basically you will be learning UNIX. Apple's version is called Darwin, which is their flavor of FreeBSD.
Here's Apple's site:
http://developer.apple.com/documentation/Darwin/index.html
As far as killing the AppleVNC server, you could find the process in
Utilities>Activity Monitor and kill it there. If it comes back up, then I think
AM allows you to see parent processes. If it is starting up after a kill, that means something else is watching it and restarting it, then also kill that parent process (watcher process)
Or, from the command line you could use ps to find the name of the
process and I think execute kill -9 <process id number>

Command line control Profile Manager 2

Greeting All,
Any guide that introduce command line that can control Profile Manager 2 to make device camera on/off? Do know is this possible via command line?
Here is the sernario.
1. User scan a QR code that trigger App to commnuicate Profile Manager turn off camera.
2. App to login Profile Manager in background and turn off camera in profile.
3. Profile Manager push profile to trun off device camera.
4. App logout Profile Manager in background.
Any advise is welcome.
Thanks,
Spin

The CommandLine tool is also shipped with JCAPS and which is very useful to tool.
We can do deploy, redeploy and undeploy with this tool. and the respective docs are available as said in the above location.

"Diadem command line control"

I have a report format that I wish to use many times with different data files. Does diadem support command line arguements so that i can startup diadem and pass it the report format and data file names i want it to use.

Hi GRD,
You can indeed start DIAdem with parameters, which Otmar is quite right in saying are usually built into a Windows shortcut, though you can just as easily issue them from the command line. The most useful of these is the "/c" parameter to run a DIAdem command immediately after launching DIAdem. If you have all your commands built into a VBScript, you can run all of them with a single parameter by referencing the VBScript, as follows:
diadem "/cScriptStart('VBScriptPath')"
The extra "" quotation characters surrounding the /c parameter enable your path to have spaces in it (i.e. 'Program Files'). If you do not have your commands in a single VBScript, you can queue up multiple /c parameters to be run sequentially after DIAdem start up.
Note that the syntax for these command parameters follows the old "autosequence" syntax from DIAdem 7 and prior versions, for example, the "/cScriptStart('VBScriptPath') command uses '' quotation characters and has no "Call" statement.
For the specific case of wanting to load a data file and a report layout file into DIAdem 9.1 just after launching it, use the following parameters:
diadem "/cDataFileLoad('DataFilePath')" "/cPicLoad('ReportLayoutPath')" /cPicUpdate
Note that if your path starts with the standard DIAdem path that you can use the "." character to quickly communicate this fact. If, for instance, your files were in the DIAdem user directory, you would use the following parameters:
diadem "/cDataFileLoad('.\user\dat\DataFileName')" "/cPicLoad('.\user\gra\ReportLayoutName')" /cPicLoad
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

Controlling Apple Chess from the command line

Hello is it possible to control Apple Chess with the command line? I would like to get two computers to play against each other over a wireless connection, either airport of bluetooth.
Any other suggestions would be great!
Thanks,
Tim

Hey all thanks for your replies. I have figured it out using Max/MSP to send Applescript UI messages to the terminal. Each computer has a patch on it and plays after the other one has made a move. It is quite fun to program as it is using the chess app as an algorithm... anyhow i can't use screen sharing because i want the computers to talk to each other as if they were playing a game of chess against against one another by speaking the moves to each other.
As if they were two computers at leisure playing chess in a park!
Best,
Tim

Launch remote control via a command line?

Is is possible to launch a remote control session via a command line as well
as the other "remote actions"?
Thanks,
Bryan

On Wed, 29 Sep 2004 22:25:17 GMT, Bryan Miller wrote:
> Is is possible to launch a remote control session via a command line as well
> as the other "remote actions"?
take a look at the online documentation which describes this..
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Command-line type itunes control - questions

Hello,
I'm writing a little tool with Applescript to control iTunes via command-line type interface. I have few general questions, thanks in advance for any answers. First I'll explain my idea, questions at the end. (If wrong forum, please tell me where to go)
The goal: to control music with as less hassle as possible. I listen music all day, have dozens of gigabites of it, and find mouse/iTunes interface too troublesome. Moodkiller whilst reading a book, for example.
Tool is pop-up dialog, with a single text field. Write something and hit enter -> search phrase or command interpreted and sent to iTunes as Applescript -> iTunes acts, and a new dialog pops up, ready for next command. (Enter with no text quits app)
Examples:
"oasis wonderwall"
Searches iTunes library and finds Wonderwall of Oasis. Displays a pop-up list of search matches, in this case just one song. Hit enter -> iTunes plays it. (If more results, I get to choose song from list.)
I find this quicker than to activate iTunes search box with mouse, enter search string, activate results pane with several TAB:s etc...
"trip-hop"
Searches an iTunes library, finding over two hundred "trip-hop" genre songs. This time just plays random song among results (thumb rule: if number of results > 100, behave that way, otherwise as above). Library continues playing from that point. Usually means you get to hear a lot of trip-hop. (could also make new trip-hop playlist)
">"
Command: skip to next song. ">>>" skips 3 songs at once, ">>>>" four songs etc
"<"+" increases three notches, "++" four etc.
Decrease volume, again "---" three notches etc.
"play", "pause", "stop"
Basic player commands, you name it.
"oasis wonderw >"
Searches song and adds it to end of current playlist (if more than one result, choose from list).
Other ideas too, but you propably got the point.
My questions:
1) Any applications currently doing this kind of job? With iTunes or other music players? (You can use Quicksilver for iTunes song searching, but I'm not certain if that's very handy or fast)
2) Would you use this kind of tool, if it were good? (just a theoretical question) If yes, how would you like to control it?
3) I have used Applescript's basic "display dialog" and "choose from list" commands, but would love more customized pop-ups (fancier song lists etc). Pointers to good scripting additions to accomplish this? Currently the entire tool is made with Applescript.
If this raises interest, I could post the tool somewhere. It's still very early draft, anyway.
Cheers,
O
Helsinki

Hi CofeeBreak,
Thank you for your comment, but I was able to find the problem (didn't solve it yet): In the FM command line interface, calling a HEX file located in a folder with brackets in its name, such as "C:\hello_World(V1)\LabVIEW.hex" will not be recognized by the FM.exe, whereas "C:\hello_World_V1\LabVIEW.hex" will work just fine. In the Flash Magic GUI and Command Line Manual section on hex files there is no mention of that, my solution at the moment is to remove the brackets from folder names.
Thanks
Amir

Command line build and source control (svn)

Using Flash Builder, what should be checked into source control to enable a command line build without any user interaction? Just checking in all the source directories is apparently not enough - as far as I can tell the individual projects have to be added to the workspace for the build to work.
I've experimentally determined that .metadata/.plugins/com.abobe.flexbuiler.project and .metadata/.plugins/org.eclipse.core.resources are the 2 directories required for my build to work. the com.adobe.flexbuilder.project directory is pretty straight forward and it's obvious what needs to get checked in. the org.eclipse.core.resources directory has quite a bit more files contained in it - do all of these need to be checked into source control for the build to work? Deleting the .history folder appears to be ok.

Hi GB_Austin,
What you need to do is set up a Single Source Layout (SSL) to
build with the conditional tags. If you are not sure how to do
this, let me know. Let's assume you have a SSL that can do this and
it is called "General". To build it using Command Line Compilation,
use the following command:
rhcl [address of your project's xpj file] -l "General" -o
[address of the output directory]
The -l (lower case L) tells the caommand line to use this
SSL. If you leave -l "General" out it will compile your Primary
Layout instead. If you leave out the -o and the address, the output
chm file will be placed in the current folder. So the basic command
is just:
rhcl [address of your project's xpj file]
I hope this has helped,
darkagn

Controlling Application Layer Firewall from Command Line Not Working

We are trying to manage the OS X Application Layer Firewall for Mountain Lion from the command-line. We have several hundred Macs that we need to manage and it isn't possible to have someone log in to each one to modify settings. We have used socketfilterfw in the past, and can still use it to add items but we can't seem to manage it at all. We are also having issues trying to remove certain items although it appears we can still add items.
When we try to block or unblock the feedback we get is that the item has been configured however when we do a list the item attributes haven't changed.
When we try to verify if the item has been signed we get an error Killed: 9
When we try to sign an item we get the same error, Killed: 9
With one item specifically, when we try to remove it we get a Segmentation Fault 11 although we can add that same item just fine.
It should be noted that doing all of this through the GUI works fine.
Does anyone have any ideas on how to manage the firewall from te command-line that works? Has socketfilterfw been depricated and replaced by something else? Is this just a bug? I am placing the same information in a bugreport but just wanted to check with the co

It's a known issue that apparently hasn't been fixed. Not a high priority for Apple Engineering, it seems.

Can flash player app be run and controlled in a system with only command line?

I want to test my. flash app in a remote linux pc. I am not permitted to install desktop environment in that remote pc.
So I am wondering if I can use flashplayer_10_sa_debug to run my app in a system with only command line access.
And further, can I use some command option to interact with my app for doing something?
If not , how can I reach my goal? Can you give me some advices?

Hi,
Can we get a status update for this? This seems to have broken Mac Projector files when published from a PC. Our old CD-ROM presentations no longer work. They throw the same error.
Is there a bug ticket that we can follow? Any sort of timeline? I need to give an answer to my client on when this will be fixed. Telling them to disable Gatekeeper isn't really a great solution.

Command line hangs when starting OC4J with MapViewer

Hello,
I have a simple development setup with a stand-alone oc4j instance installed via the MapViewer Quick Start Kit, on an 11g database, on a Windows XP workstation.
The problem: When I start the oc4j instance everything seems to start up successfully - the AS Control, the MapViewer EAR, etc.., but the command line window hangs after the last command is executed. It does not return to the command prompt. And if I close the Command Prompt window the oc4j instance automatically shuts down. Any thoughts on why this is hanging? Or is this normal behavior? Thank you. The text of the startup is shown below.
(Oh...and if you have any idea why I am getting a string of [ConverterRule] WARNINGS, please let me know. Thanks.)
-Dan
------- Output below --------
C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home>java -jar oc4j.jar
WARNING: Code-source C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applica
tions\mapviewer\web\WEB-INF\lib\dms.jar (from WEB-INF/lib/ directory in C:\app\o
racle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\WEB-INF\l
ib) has the same filename but is not identical to /C:/app/oracle/product/11.1.0/
db_1/oc4j_mv/lib/dms.jar (from <code-source> (ignore manifest Class-Path) in MET
A-INF/boot.xml in C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\oc4j.jar).
If it contains different versions of the same classes, it will be masked as the
latter is already visible in the search path of loader mapviewer.web.web:0.0.0.
WARNING: Code-source C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applica
tions\mapviewer\web\WEB-INF\lib\ojdl.jar (from WEB-INF/lib/ directory in C:\app\
oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\WEB-INF\
lib) has the same filename but is not identical to /C:/app/oracle/product/11.1.0
/db_1/oc4j_mv/diagnostics/lib/ojdl.jar (from <code-source> (ignore manifest Clas
s-Path) in META-INF/boot.xml in C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\h
ome\oc4j.jar). If it contains different versions of the same classes, it will be
masked as the latter is already visible in the search path of loader mapviewer.
web.web:0.0.0.
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Number,null)
2009-03-10 10:51:20.500 NOTIFICATION oms root path: C:\app\oracle\product\11.1.
0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\
09/03/10 10:51:20 mbean domain: mapviewer
2009-03-10 10:51:20.500 NOTIFICATION OMSConfig mbean regisred.
2009-03-10 10:51:20.500 NOTIFICATION MapTileServer root path: C:\app\oracle\pro
duct\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\
09/03/10 10:51:20 mbean domain: mapviewer
2009-03-10 10:51:20.515 NOTIFICATION MCSConfig mbean regisred.
2009-03-10 10:51:20.515 NOTIFICATION MapViewer server version: Ver1033p5_B081010
2009-03-10 10:51:20.515 NOTIFICATION using default config file: C:\app\oracle\pr
oduct\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\WEB-INF\conf\mapV
iewerConfig.xml
2009-03-10 10:51:20.515 WARNING dcsf:true
2009-03-10 10:51:20.531 WARNING destroying ALL mapmaker instances.
2009-03-10 10:51:20.531 WARNING dcsf:true
09/03/10 10:51:20 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
2009-03-10 10:51:20.578 NOTIFICATION Spatial Provider shapefileSDP has been regi
stered.
2009-03-10 10:51:20.578 NOTIFICATION Map Recycling thread started.
2009-03-10 10:51:20.593 NOTIFICATION *** Oracle MapViewer started. ***
2009-03-10 10:51:21.515 NOTIFICATION *** Oracle MapTileServer started. ***
2009-03-10 10:51:21.531 NOTIFICATION *** Oracle Feature of Interest (FOI) Server started ***
---> This is where it hangs up. It just sits here and never returns to the command prompt.

I guess I've come to the conclusion that it's normal for the command window to remain open while mapviewer is running. I just don't recall that from my previous installations.
-- considered answered.

Command line interaction - piecemeal!

Hi All
I am using "Calling System Exec.vi". Lets say you have a command line app where you have to interact with it over the command line (e.g the command line is the applications UI) The app prompts the user for input for example "Press L to load" and then provides output, e.g. "Load Successful" and these "questions and answers" may occur a number of times.
From what I can understand this VI is geared towards running the command line application and entering all input (standard inpu) and getting all output (standard output) within a single execution of the Calling System Exec.vi
What i need to be able to do is open the app but then enter the input and retrieve the output on a piecemeal basis, at will, without having to wait for the overall execution of the vi to end and\or having to retrieve the standard output in one big lump when it does end. Is this possible, if so how?
The nearest analogy I can provide to describe what I want to do is when you are communicating with an instrument, you first open it and then you write to it (standard input) to get it to perform some action, and then you read from it (standard output) to get a response. Finally when your done you close it.
I have a feeling that this is looking like a DLL but because this is a third party .exe I cannot obtain a DLL so this is my only option.
Thanks for your help.

This question has been brought up before. Did you try a search?
http://forums.ni.com/t5/LabVIEW/Controlling-the-STDIN-STDOUT-of-a-legacy-application-in-LabVIEW/m-p/...

Need a command line switch to close Acrobat Catalog Index batch file

I am looking for help with a command line switch. I am VERY new to scheduling tasks and writing scripts.
Our office created an Acrobat Catalog Index that needs to be updated on a regular basis. I created a .bpdx file as follows:
\\dept\SPDintelshare\Analysis\2nd Hand Transaction Logs\Secondhand Transaction Logs.pdx /rebuild
This runs via Microsoft Task Scheduler from a .bat file as follows:
"C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe" "C:\Documents and Settings\cutrone0999\Desktop\PawnIndex.bpdx"
The batch runs just like it is supposed to, but it won't close when it is finished re-building. I have tried using EXIT at the end of the .bat file and that doesn't work. I also tried a force close for acrobat.exe and that doesn't work either. The problem is that if I log off my computer the batch will run as scheduled and when I log back on in the morning the scheduled task shows 'running' and I have to end it. Then I have to re-start my computer or I can't open any Adobe documents.
If I leave my computer logged on, the batch runs as scheduled and when I log back on in the morning I have to close the dialog boxes showing the index re-ran and then close Adobe.
I would appreciate any suggestions. I have googled this every way I can think of and I'm not finding any results that are helpful. Thank you in advance!
Paula Cutrone
Lead Crime Analyst
Onondaga Crime Analysis Center
Syracuse, NY

Acrobat can be opened by a Windows batch process, but a Windows batch process can not trigger a batch process/Action within Acrobat. It is possible with MacIntosh's Apple Script to open a PDF and run Acrobat JavaScript but not interact with Acrobat's Batch Processing or Acrobat's Actions. Note that opening a BPDX file is different than opening an Acrobat Seq file.
The catalog/index scheduled update is not part of Acrobat "Batch Process" or "Action". The running of rebuilding of the catalog/index is controlled by the values within the BPDX file. So if one opens the BPDX file with Acrobat and a catalog/index is scheduled to be rebuilt or past the scheduled date and time, then the catalog/index build is submitted for precessing by Acrobat..
Now the issue is how to close Acrobat after this processes has completed. Since Acrobat does not communicate with the Windows OS system, the Widows scheduled process has no way to know when this task has completed. Even though one can use JavaScript to test the status of a submitted Catalog/Index build/rebuild there is no communication of the submitted catalog job unless quired by Acrobat JavaScript. If you check the Acrobat JS API Reference you will see there are 2 possible results for a catalog/index rebuild, a completed rebuild and a termination with errors. One of these should require additional action.
Further, a recent update to Acrobat JavaScript has added restrictions to using JavaScript to "closeDoc" method which may need to be addressed.
It is also possible to open an FDF file and add/run JavaScirpts within a PDF, and again this is different than running a "Batch Process"/"Action" in Acrobat.

TREX command line control

Similar Messages

Maybe you are looking for