Trigger output function in quotation

Hello,
There is a button on the header of the quotation called "trigger output", what is this function means?
At the moment, when I click it, it shows" no manual print functions found".
It looks like there is some customizing is missing, can somebody give me some hints?
Thanks!

Hi David,
thanks to your response anyway, but do you mean I need to do the customizing for the action profile??
Many thanks
PS. no need to send it to my mailbox
Edited by: Holger Gnoth on Jul 10, 2008 2:09 PM

Similar Messages

Possible to trigger output type through Function module?

Hi,
Is it possible to trigger output type through Function modules or through some codings or any standard FM's?
Regards
Bala.

You did not specify what area you need to retrigger an output type for, but here is a sample to retrigger a delivery output.
CALL FUNCTION 'BAPI_LIKP_PROCESS_MSG_DIRECT'
    EXPORTING
DYNAMICOUTPUTDEVICE       =
      processing                       = PROCESSING
SORTMESSAGE               = 1
    TABLES
      deliverynumber                 = delnbrs
      outputtype                       = outputs
      messageprotocol              = bapimsgprot
      return                              = bapiret2.
Thanks

Trigger Output Type through RFC

My requirement is when RFC is called then based on the invoice number and Fax number this RFC should able to create invoice document in PDF format and sent a mail to particular fax number with PDF as attachement.....
we have created output type to trigger the print program which call the smartform then then we convert smartform into PDF format and send a mail so by this we are done with part to create the PDF and email it ...
but the problem is i want to trigger output type when RFC is called....so that it will called the print program and process goes on as planned..?
Is there any FM to trigger O/p type so that i can call it in RFC
or some other option???

You did not specify what area you need to retrigger an output type for, but here is a sample to retrigger a delivery output.
CALL FUNCTION 'BAPI_LIKP_PROCESS_MSG_DIRECT'
    EXPORTING
DYNAMICOUTPUTDEVICE       =
      processing                       = PROCESSING
SORTMESSAGE               = 1
    TABLES
      deliverynumber                 = delnbrs
      outputtype                       = outputs
      messageprotocol              = bapimsgprot
      return                              = bapiret2.
Thanks

Where is Output function in Bridge for Windows

I am learning Adobe Photoshop and am being introduced to Bridge. The Tutorial I am using demonstrated the Output function which allow images to be converted to PDF's. In my Windows version I am finding a Keyword function in it's place that does not do the same thing. Can someone tell me where the Output function is for the windows version of Bridge?

In my Windows version I am finding a Keyword function in it's place that does not do the same thing.
Not sure if I understand this problem, there is a Keyword panel where you can add keywords and sub keywords or select already existing keywords
Can someone tell me where the Output function is for the windows version of Bridge?]
In Bridge CC it is gone with numerous posts about it hence you did not get a reaction on your post. But since you clarified you have CS6 then there are two ways. One is a tiny little icon left in the top bar (Between the 'edit in Camera Raw' and 'left and right rotation arrows' showing a paper with folded edge.
The other more easier way is to select the workspace called 'Output'. You can find this at the right side of the top bar next to the search field. Either click on the triangle to reveal the rest of the names or drag the 2 vertical dotted lines to the left to extend the row of workspace names.

How to use trigger file functionality in File Adapters - Match file names

Hi,
I am using trigger file functionality in File adapters to pick up data files as:-
<property name="TriggerFilePhysicalDirectory" value="/pub/Dev/eastern/brs/"/>
<property name="TriggerFile" value="*.trg"/>
Here any file with .trg extension is taken as a trigger file and File adapter randomly picks up one of the data files.
My requirement is that the trigger file will be of the same name as that of the data file like:- <data_file>.data <data_file>.trg
How to implement this feature using trigger file functionality of File adapters??

The trigger file is any file that indicates(triggers) that the actual data file has been put in ftp location, i.e- determines the state when data file should be read.
This helps usually when a large data file is being transferred and at that incomplete state the FTP adapter tries to read it(which is not desirable)
It is configured when you create the ftp adapter service in your process(in wizard) or u can manually configure that in the JCA file for the FTP Adapter service as below:-
<?xml version="1.0" encoding="UTF-8"?>
<adapter-config name="FlatStructureIn" adapter="File Adapter" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="*.txt" adapterRef=""/>
<endpoint-activation operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property.../>
<property name="*TriggerFilePhysicalDirectory*" value="/tmp/flat/ArchiveDir"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
Reference: http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAJCBGI

Trigger output on Inbound Delivery Type

Hello,
I'd like to know if it's possible to trigger output on Inbound Delivery Item in SAP ERP. Reason I ask is that we want to trigger a label printout for every delivery item during goods receipt of the inbound delivery.
I know I can trigger output on Inbound Delivery Header, but not sure how to get a printout per delivery item.
Can anyone let me know if it's possible, and if so, how to set this up?
Regards,
Oliver

Hi,
I am not experienced in printing, and at first glance this does look difficult...
Because in customizing you have two separate paths...
The path given above from Warren, and then it splits:
- Maintain Output Determination for Outbound Deliveries
- Assign Output Determination Procedure
- Maintain Output Determination for Inbound Deliveries
- Assign Output Determination Procedure
Now the difference in these two paths is that:
- if you select the first one, you get a pop-up giving you a choice to "Assign Deliveries (header)" and "Assign delivery items",
- if you select the second one, there is no further selection, you only see delivery types, and this is also filtered, only inbound deliviery types are shown.
So it seems not possible.
BUT: if you select the "Assign delivery item" option in the first path, you see ALL item types; also for inbound. So test it there, hope it works. (I suppose now that you know how to print, have all the determination, etc - yes, you wrote that you know it for outbound).
Brgds
Juergen

Amended PO attempt to trigger output and Failed

Hi,
In the application monitor out put errro's, i have the above said error "Output error in purchase order 65000XXXXX for output medium MAI "
and in the out put log i am able to see below log.
Search Result: 1 Document Output Status Changed Repeated Manual Generat.on Generat.at Changed on Changed at Medium Actions
Incorrectly processed        27.04.2009 09:42:06 27.04.2009 09:42:07 Mail
Output Log Message Type Message Documentation
Information Date: 27.04.2009 Time: 09:42:06
Information Name of the Smart Form: ZEBP_PO
Information Processing class: CL_PD_PO_PROCESSING_BBP
Information Processing method: PROCESS_BBP_PO_MAI
Error Status does not allow output (held?)
Error Document not sent to
Error Action could not be successfully executed
Amended PO should not trigger output and not triggered. but the question is why it attempt to trigger output and failed
Can any one please let me know where i can see why system attempt for output and failed
Regards,
Jai

Resolved

No Output Function in Bridge CC

I just downloaded Bridge CC last week and I don't have the Output Function, do I need to re-download the program?

I believe you are talking about Adobe Output Module. When Bridge CC shipped, it didn't include the Adobe Output Module.
For installing it please download the package as listed in the below mentioned link and follow the install instructions.
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
Make sure that you have the most recent version of Bridge CC(6.0.1) installed.
Regards,
Ashutosh

A trigger blocking function for control cycle in Kanban

Hi,
I wantet to change the status in Kanban. I get this error u201CA trigger blocking function was defined for the control cycle in the replenishment strategyu201D. I don't want to set a period of blocking function. how can I deactivate it.
Thanks

Hi,
Pls. check the following setting :
First in PK13n ( KANBAN Board) check whether X is marked with KANBAN Number e.g. 1X.
If so then replenishment will not be triggered because KANBAN is locked.
To unlock the KANBAN pls do the following :
Go to -
> PKMC ( Control Cycle Maintanance) in Change Mode----> Select Control Cycle -> Go to Display Control Cycle ( Glass Icon)--> on top of details of kanban cycle choose option ---> Display Kanbans ( Spectacle Icon )
Select it and go inside : Inside pop up appearing check first Column : Lkln ( Lock Indicator).
Remove the tick in check box of lock indicator for respective KANBAN for which you want to trigger replenishment.
Pls. try above settings and revert back if still problem persists.
Reward if problem solved.
Regards,
Tejas
Edited by: Tejas Pujara on Aug 1, 2008 12:25 PM

We have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.

we have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.
Rajiv Kumar

Hi,
More details about your discussions forum will make others easier to find a corresponding solution on your requirement.
If you mean there are three Discussion Board list waiting for synchronizing, I would suggest you create an Event Receiver for the three Discussion Board list.
Here is a link with code demo about how to copy items from one Discussion Board to another including Replies:
http://spcodes.blogspot.com/2013/03/programmatically-copy-items-from-one.html
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

Trigger and Functions

Hi All,
I am new to PL/SQL. In my projeect i came thru a requirement.
My table has a column called time and the type of column is char(4).
data will look like 1100. The new table has time as char(5), Now i want to write a trigger for each row inserted to change time col data to 11:00
for that i wrote a trigger and function. The function compiled well, i get errors compiling trigger.
Here is the code for trigger and the function. Any help is appriciated. any code that will meet my requirements is helpfull.
create or replace TRIGGER "PACER"."TimeTrigger"
AFTER INSERT
ON PACER.TIMETEST2
BEGIN
UPDATE TimeTrigger
     SET TIME1 = ChangeTime(TIME1);
     SET TIME2 = ChangeTime(TIME2);
END;
Error(9,2): PL/SQL: SQL Statement ignored
Error(9,6): PL/SQL: ORA-00922: missing or invalid option
create or replace FUNCTION ChangeTime(ChTime VarChar2) RETURN Varchar2 IS
     Len NUMBER;
     ChHours CHAR(2);
     ChMinutes CHAR(2);
     ChSec CHAR(2);
     ChColun CHAR(1);
     ChTimeFormat CHAR(5);
BEGIN
     Len := LENGTH(ChTime);
     ChColun := ':';
     IF Len = 4 THEN
          ChHours := SUBSTR(ChTime,1,2);
          ChMinutes := SUBSTR(ChTime,3,4);
          ChTimeFormat := ChHours||ChColun||ChMinutes;
     END IF;
     RETURN ChTimeFormat;
END ChangeTime;
Thanks.

Hi,
Here's something you can try. It should give you ideas.
CREATE TABLE     table_x
(     empno          NUMBER
,     ename          VARCHAR2 (10)
,     status_cd     VARCHAR2 (1)
CREATE TABLE     table_y
(     id          NUMBER
,     name          VARCHAR2 (15)
,     status_cd     VARCHAR2 (1)
CREATE OR REPLACE TRIGGER     table_x_aiu
AFTER INSERT OR UPDATE ON     table_x
FOR EACH ROW
BEGIN
--     This trigger keeps a copy of table_x's
--     empno, ename and status_cd columns in table_y's
--     id,    name and status_cd columns.
--     The strings in table_x be any combination of UPPER
--     and lower case, but the copies in table_y are always
--     UPPER.
     MERGE INTO     table_y     y
     USING     (
          SELECT     :NEW.empno          AS empno
          ,     UPPER (:NEW.ename)     AS ename
          ,     UPPER (:NEW.status_cd)     AS status_cd
          FROM     dual
          )          x
     ON     (x.empno = y.id)
     WHEN MATCHED          THEN
     UPDATE     SET     y.name          = x.ename
          ,     y.status_cd     = x.status_cd
     WHEN NOT MATCHED     THEN
     INSERT     (y.id,          y.name,          y.status_cd)
     VALUES     (x.empno,     x.ename,     x.status_cd);
END     table_x_aiu;
SHOW ERRORS
PROMPT ***** Testing INSERT *****
INSERT INTO table_x (empno, ename, status_cd) VALUES (1, 'Agatha',     'A');
INSERT INTO table_x (empno, ename, status_cd) VALUES (2, 'Lucy',     'b');
PROMPT     ***** table_y should have two rows *****
SELECT     *
FROM     table_y
ORDER BY     id;
PROMPT ***** Testing UPDATE *****
UPDATE     table_x
SET     ename     = 'Agnes'
WHERE     empno     = 1;
PROMPT     ***** ID=1 should have name='AGNES' and status_cd='A' *****
SELECT     *
FROM     table_y
ORDER BY     id;The names I give to triggers are usually similar to, but not exactly the same as, the name of the table to which they are attached. The last part of the trigger name, "_aiu", is a reminder that this trigger fires After Insert or Update.
Avoid using double-quotes when naming things.

How-to trigger a function module after user logs on

Dear All,
We would like to trigger a function module after a user connects to our BW system.
The user exit SUSR0001 works, but only when the user is connecting via the SAP GUI --> it is not called if the user connects via the Business Explorer or the WEB
Any thoughts on how to achieve this?
Any help appreciated
Thank you
Ioan

Hi Ioan,
I would recommend to post this thread in the abap forum.
Siggi

PXI 5422 Trigger output control

How can the trigger output of the Digital Data and Control be controlled?
Can it produce either a trigger pulse or digital value change on one of the PFI outputs through software instead of just at the start of the generation?

Hi,
Could you explain a little more about your application and what you are trying to achive, as well as what events you want your trigger to be output on? What is this tigger going to be driving?
Thanks
Matt Surridge
National Instruments

Trigger Output Condition for EDI Medium

I need to trigger output for one Z Order Type which is having the medium as EDI.
I am aware of FM WFMC_MESSAGE_SINGLE which could trigger output for print medium (Doesn't work EDI medium 6) .
I need a similar FM but for EDI.
Thanks
Anand

Hi
Check the following fun Modules
WFMC_MESSAGES_SELECT_PA
WFMC_MESSAGES_EXTEND
WFMC_MESSAGES_PROCESS
WFMC_MESSAGES_SELECT
WFMC_MESSAGES_SELECT_ALL_FALSE
WFMC_MESSAGE_SINGLE_NO_UPDATE
WFMC_MESSAGE_SINGLE_SCREEN
Reward points for useful Answers
Regards
Anji

Trigger Javascript function onClick of HTMLB button

Hello Everyone,
Could anyone give me some sample code to trigger a Javascript function onClick of HTMLB button. Basically I have some javascript code and I want it be executed on click of a HTMLB button. I would greatly appreciate your help. Thanks.
Regards,
GY

Hi,
as Ravi wrote, you trigger javascript functions using the attribute onClientClick. You define first the javascript code in your page and then you can call the code like this:
      <htmlb:button text    = "Some text"
                    encode = "false"
                    onClientClick = "javascript:Your.Function()" />
check that you define the code first and then you write the code for your button; otherwise, application will not know that the JS code exists.

Trigger output function in quotation

Similar Messages

Maybe you are looking for