Trigger/Sequence not in ddl preview when comparing models

Hi,
I've a problem with incremental DDL generation and trigger/sequence (auto-increment).
First case :
I've created a table and generated it in my Oracle database.
Then, I've defined on my primary key column the "Auto-increment" and "Identity column" to Yes (and of course sequence and trigger names filled).
If I generate DDL (File/Export or Generate DDL button), no problem. The DDL script contains the sequence and trigger defined in auto-increment properties.
But if I compare my model and the database (Import data dictionnary, swap target...), the sequence and the trigger are not in the DDL preview.
Second case :
If I create a new table in my relational model, with filled auto-increment properties, and then I compare model and db, the new table is created, with associated sequence and trigger. This is completely normal.
Last case :
A trigger manually defined in physical model is not in DDL preview if the table already exists in database. If the table doesn't already exist in db, all statements (table, sequence, trigger) are generated.
my conclusion : auto-increment properties are not taken into account in the incremental DDL generation if the table already exists.
Can you confirm this ?
thanks
regards
Fabrice
(Data modeler 3.1.4)

Hi Fabrice,
A trigger manually defined in physical model is not in DDL preview if the table already exists in database.Yes. This is true.
my conclusion : auto-increment properties are not taken into account in the incremental DDL generation if the table already exists.The actual situation is that auto-increment properties are not taken into account in the incremental DDL generation if the column already exists.
David

Similar Messages

  • After Effects CC not saving ram preview when switching to different tab.

    Okay so just recently upgraded to CC and have been experiencing some ram preview problems.
    What happens is I will do a ram preview, watch it, then switch to a different window (Chrome, word, etc)
    and when I go back to AE and do a ram preview it does it all over again even though i haven't changed anything in the comp.
    I dont believe this was a problem in CS5.
    Any help on what settings i should check or if its a coding problem would be appreciated.
    Some specs:
    16gb ddr3 ram
    AMD FX-6300
    Radeon R7 250
    Everything Program/Cache is on SSD and the project file/video files are on Ext HDD

    Okay it's kind of fixed. (it isnt deleting it like it used too)
    i cleared my cache which was about 30gb, but I still had about 20gb of free space when i cleared it
    but Now I am getting some crashes and other stuff (colored bars, i already read thats getting fixed though)
    Do you think lowering the CPUs used to 3 will help?
    Ill update if it does it again when the cache is getting close to full

  • Photoshop CC: Save For Web function does not update filesize previews when I change filetypes

    I recently tried to save some web banners and wanted to optimize for smallest filesize with best looking output, and as I changed filetypes from Gif to Jpeg to PNG, the preview at the bottom of the window that usually updates with estimated filesize was not changing and the preview image would not change as well. The issue made it impossible to predict the output and required that I actually save in all the variations, then reopen them to see the end result.
    My software is up to date.
    Not really sure what it can be.
    Please help.
    Casey

    Same issue. Hoping someone responds to this thread soon

  • Format and Partition Task Sequence Not Working As Exprected When Using USB Media

    Task looks like this. 
    Had been working on PXE based task sequence, but when I use USB media, it only makes a single partition that is around the size of the USB thumb drive.
    How does this need to be changed so that it makes a C drive partition that is 80% of the total local disk space and a D drive that uses the remaining disk space when using USB boot media?

    If you choose to create a "custom" partition configuration like the one above, then you are responsible for creating any extra required partitions like a BitLocker boot partition.
    Additionally, if you are deploying on a uEFI machine, then you will also need to create the correct uEFI partitions.
    Generally I discourage creating extra partitions.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • I do not have many messages but my iphone 5s says messages take up 4.6GB of space.  When comparing with friends who have many more message, less than 1 GB is being used on their phones.  Why are mine taking up so much space and how do I correct that?

    I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space.  When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages.  Why are mine taking up so much space??

    I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
    But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

  • WHEN-NEW-FORM-INSTANCE trigger does not fire

    Hi,
    Does anyone have any idea why code placed in the when-new-form-instance trigger appears to be ignored when the form is executed from one login but runs fine when executed from another? A breakpoint on the first executable line of code in the trigger confirms that the trigger is not being fired.
    Regards,
    Ian Dodds.

    Hi again Duncan,
    I was able to solve it once I ran the form with the Forms Runtime Diagnostics enabled. I had a table in my schema containing old data used to build menu items. This was causing runtime errors to occur during calls to SET_MENU_ITEM_PROPERTY that were not being propagated to the UI so I didn't know they were occuring.
    The upshot was that the WHEN-NEW-FORM-INSTANCE trigger was not firing. Once I corrected the data it worked a treat.
    Thanks very much for pointing me towards FRD, it's the first time I've used it but it won't be the last.
    Cheers,
    Ian.

  • When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI Quicktime opens one page only. Can anyone assist?

    When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI pages Quicktime will only show one page. So, not very useful!!
    Can anyone assist?

    More threads: https://support.mozilla.org/en-US/search?q=fbi&asked_by=&answered_by=&w=2&a=1&sortby=1&esab=a

  • In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?

    In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?

    I have the same problem with lectures slides.
    Furthermore, sometimes the text box, when doube-clicking, turns  the text into a one-liner. Causing the text box to sometimes get 3. times wider than the pdf itself.
    tcrother wrote:
    ... then when it rotates the text isn't visible and I'm stuck clicking on random parts of my lecture slides hoping the text box will come back. ...
    By pressing [cmd + I] the Inspector opens up and clicking on the rightmost tab 'Annotations' you should be able find those Annotations again. I do this regularly to find the empty annotations I accidentally create while clicking through slides.

  • RoboHelp HTML v9 - Browse Sequence not appearing when generated

    RoboHelp HTML v9
    New project - eg not converted from previous version
    Added a browse sequence as per the help documentation - I've followed the help documentation however when I get to view result of the generated WebHelp - the browse sequence is not present on the topic pages that were added to the browse sequence.
    I read previous forum postings for RH8 - where reinstalling or repairing the software seemed to assist - however when I access through control panel - add/remove programs the only option in to Remove RH9.
    So I thought I'd ask the question here before uninstalling.
    There was also mention of a dll file that needs to be registered on the viewers pc before the browse sequence would appear and if this is the case due to the possible audience for the publish I would not be able to control that.
    Any help is appriciated, thanks.

    Hi
    Thanks - I guess I was looking for the page icons that visualized the
    sequence for the viewer.
    That being said - the navigation arrows are present in my published file
    however seem to hold no functionality - while on a topic that is within
    the browse sequence clicking the arrows does not move through the
    sequence.
    I was initially looking for onscreen navigation  for a series of topics -
    I though browse sequence would do the trick but I think I will move to
    another method.
    Karen Voycey, BSc
    Learning Solutions Specialist | Human Resources
    10 Wellington St. E. | Toronto, ON | M5E 1L5
    t. 416 366 7600 x 2451|1 800 569 1163 | cell +416 568 2551
    [email protected]
    Proud national insurance sponsor of the AIR MILES® Reward Program. For
    more information go to www.rsagroup.ca.
    RSA is a registered trade name of Royal & Sun Alliance Insurance Company
    of Canada.
    From:   Captiv8r <[email protected]>
    To:     Karen Voycey <[email protected]>
    Date:   13/07/2011 04:52 PM
    Subject:        RoboHelp HTML v9 - Browse Sequence not appearing
    when generated
    Hi there
    Your mention of: "the browse sequence is not present on the topic pages
    that were added to the browse sequence" seems to imply that you are
    expecting to see the sequence directly on those pages. But that usually
    won't happen.
    Perhaps it will help to start by viewing the link below:
    http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/012006.htm
    Then come back with any questions you may have.
    Cheers... Rick
    http://www.robowizard.com/pc.gif
    Helpful and Handy Links
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
    http://www.ShowMeSolutions.biz
    http://sorcererstone.wordpress.com/
    http://www.gooberguides.com

  • I have manipulated a photo using layers etc and then flattened it and saved it under a new name.  When I use 'Preview' (mac) to view the finished photo it doesn't look right.  It's as the layers have not flattened correctly.  When viewed in Elements 12 it

    I have manipulated a photo using layers etc and then flattened it and saved it under a new name.  When I use 'Preview' (mac) to view the finished photo it doesn't look right.  It's as the layers have not flattened correctly.  When viewed in Elements 12 it looks OK.  The photo looks incorrect in other software such as photo books.
    Looking at the same photo before flattening, what is being shown is only the top layer.
    How do I correct this?

    STEVEN1A wrote:
    I have manipulated a photo using layers etc and then flattened it and saved it under a new name.  When I use 'Preview' (mac) to view the finished photo it doesn't look right.  It's as the layers have not flattened correctly.  When viewed in Elements 12 it looks OK.  The photo looks incorrect in other software such as photo books.
    Looking at the same photo before flattening, what is being shown is only the top layer.
    How do I correct this?
    The top layer is indeed the one that is visible, unless there is/are area(s) of translucency on that layer, so that you can visualize a portion of the subjacent layer.
      the finished photo it doesn't look right.  It's as the layers have not flattened correctly. 
    Are your settings targeted to have the printer manage colors, or, to have PSE manage colors?

  • How do I tell Preview/Safari not to date-stamp when I print/save a webpage?

    How do I tell Preview/Safari not to date-stamp when I print/save a webpage as a PDF?
    There doesn't appear to be a Preference for this. Thanks.

    Oops, sorry, I was planning on selecting "helpful" and then "solved" for your reply, but the "solved" button has disappeared. Looks like I can only pick one.

  • When-mouse-click trigger is not working

    Hi,
    My forms version is 10g.
    I've a black level and item level when-mouse-click trigger.
    There is some code inside that which is not being executed.
    To test, i simply printed a hello message inside the trigger's code.
    Even hello is not being displayed.
    Can anyone please help me in why this trigger is not working.
    Navnit

    You have some other issues going on if you don't see anything from a when-mouse-click trigger.
    First of all, are you spelling the trigger using a dash or underscore? WHEN-MOUSE-CLICK will run, but WHEN_MOUSE_CLICK will not.
    Have you set :SYSTEM.Message_Level to some value above zero in the form? If so, set it back to zero.
    On what object are you trying to click? Is this causing navigation? Navigation may cause validation to run, which may fail, which may prevent the navigation, which may prevent your when-mouse-click from running.
    And last, are you sure you are running the currently compiled fmx version of your form?
    When nothing works, you need to back up and start finding out what DOES work first.

  • Why my child or subpages not showing in preview or when published?

    Why are my child or subpages not showing in preview or when published?

    Hi,
    Are you unable to see the child pages in the Menu? If yes, please make sure you select "All pages" in the Menu type dropdown. By default, "Top level pages" is selected.
    Cheers!
    Aish

  • FailureHan​dlerExampl​e does not seem to work when used in the ProcessMod​elPostStep​Failure Sequence of the Sequential​Model

    I've incorporated the FailureHandlerExample into my Test Sequences (with some minor modifications) and it works ok when it is in the SequenceFilePostStepFailure in my Sequence File. However, it says in the Sequence comments that this can be made into a ProcessModel Sequence by putting into the ProcessModelPostStepFailure Sub Sequence of the SequentalModel. I tried this, and it doesn't work. It has the same internal steps as the SequenceFilePostStepFailure Sequence, but it never gets called. What do I need to do to get this to work properly in the event of a failure?

    I have just tried the callback and it works for me. Here is what I did.
    1) open new sequence file.
    2) double click on model path shown at the bottom of the sequence editor. This opens model file associated with the new sequence file.
    3) with the process model file active, select Edit>>Sequence File Callbacks
    4) select ProcessModelPostStepFailure in the dialog box provided, click the Add button and then the Edit button.
    5) Add a message popup to the newly created ProcessModelPostStepFailure.
    6) Return to the new sequence file created in step 1 above.
    7) select the None adapter and insert a Numeric Limit Test step type.
    8) change the step limits to be 5 and 10. The step will then fail since the default measurement is 0, outside of the limits.
    9) run the sequenc
    e by selecting Execute>>Single Pass.
    The step fails and the ProcessModelPostStepFailure is called, displaying the message popup.
    See if this works for you.

  • DDL Preview doesn't work correctly - User defined DDL (2.0.0 Build 584)

    After changing "User defined DDL" statement in view definitions, i imported schema metadata (File>Import>Data dictionary) and compared my datamodel with my current database schema. The changes were detected correctly and alter DDL statements for tables generated correctly also.
    When i viewed the "compare models" dialog it all seemed to be all right and the modified User DDL statement for the view was marked. But when i generated DDL script, only the old DDL for this view was generated.
    Even when i try to generate DDL via "DDL Preview" on object directly, the new DDL is ignored.
    I couldn't find forum entries, but maybe some of you have experience about this issue or known bugs.
    Edited by: Stephan Tomczik on 31.01.2011 02:26

    Hi,
    I'm not sure if you're aware, but there is a 3.0 beta version of Data Modeler.
    You can download it freely from here :
    http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html
    There are many bugs fixed there.

Maybe you are looking for