TRIGGER TO RECORD WHEN SOMEONE ADDS ROWS

Hello,
I am trying to write a trigger that will timestamp who adds rows to a table,
I must be close but sql developer is telling me that i dont have enough values.. does anybody know what is missing here? my table has 3 cols, the pk, username and date_entered
thank you Very much in advance
CREATE OR REPLACE
TRIGGER REGISTRAR_ENTRADAS
AFTER INSERT ON EVALUATION
FOR EACH ROW
BEGIN
insert into audit_record_tb1
values(sys_content('userenv','current_user'),
sysdate);
END;
Alvaro

thank you to you two very much i dont know how to give a correct one to you two, i know you both have it right but i have exactly this
CREATE OR REPLACE
TRIGGER REGISTRAR_ENTRADAS
AFTER INSERT ON EVALUATION
FOR EACH ROW
BEGIN
insert into audit_record_tb1(user_value, date_recorded)
values(sys_content('userenv','current_user'),sysdate);
END;
and for some strange reason i am getting an error saying that sys_content is an invalid identifier
and my table, well yes, as easy as in the example create table audit_record_tb1 (user_value varchar2(25), date_recorded date);

Similar Messages

  • Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.

    Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.

    You could try to use a motion sensor - in a do-it-yourself store you can buy motion sensors that turn on the lights when a burglar approaches the property. Connect this sensor to the remote control of your camera instead of to a light.
    Probably you can buy ready-made motion sensitive remote controls, the photographers here will know. You would need this kind of remote control for wildlife photography.

  • Field values erases when Add Row button is pressed in Master Detail Form

    Hi,
    I am using APEX 4.0. There is a master-detail form in a page, this has 5 rows in it by default, has a Add row and a Delete button. I face two problems now:
    1. When the values are entered in all the 5 rows, that are in default, and Add Row button is clicked, these values are entered in the DB, but they are erased from the interface. Means when user clicks Add row he don't see the old values he has entered. All new empty rows are only seen. This might confuse the user. How can I resolve this.
    2. The values are saved to the DB only when the Add row button is clicked, so suppose if the user enters some wrong values in the default rows and after he clicks Delete button, all the field values are erased. Is there a way to delete only that particular row? (Please note: the values are not saved to the DB, unless the Add Row button is clicked)
    Please let me know how to resolve these 2 issues.
    Thanks.

    So let me get this straight:
    You enter information into a tabular form and then click the add row and the data is being duplicated from the prior row or being inserted into the table ?
    Thank you,
    Tony Miller
    Webster, TX
    A lady came up to me on the street, pointed at my suede jacket and said "Do you know a cow was murdered to make that jacket?"
    "I didn't know there were any witnesses", I replied " Now I'll have to kill you too"

  • Add Row in Master Detail Form

    Hi all,
    I wonder if there is a way to just Add Row in the master detail (tabular) form without actually submitting the page. So if user has updated any existing row before clicking the Add Row button, the update should not be submitted by Add Row button click. If this is possible, then I want to submit (insert) the newly added row as well as any updates made to the existing rows when user click the "apply changes" button.
    Any luck?
    Thanks for the help.
    Milaan

    Hi Andy,
    Thanks for your response. Here is what I am doing... On submit I am calling another page (popup) for user to enter electronic signature. So when they add row (which is a submit), it calls the electronic signature page popup, and only upon entering the signature (nuisance at this point) it adds a row in the tabular form. Is there a way to change this behavior to not to submit the page every time user click Add row button?
    Thnx
    Milaan

  • 2 table rows - one "Add Row" button

    I am a novice, not alot of training with javascript.
    I need 2 table rows added to a table without having multiple "add row" buttons. I would like to be able to add both rows with one button.
    right now the button is set for the most current row:
    Table1._Week.addInstance(0);
    the row above is Table1._Codes
    How do I script this in order to have both rows appear when the Add Row button is selected?

    Hi,
    A couple of things without benefit of seeing the form.
    Are the repeating rows called:
    'Week' / 'Codes'?
    OR
    '_Week' / '_Codes'?
    The underscore '_' is shorthand for instanceManager, which is used to call the addInstance. If I assure that the repeating rows are just 'Week' / 'Codes' then the following javascript in the click event of the button should work:
    Table1._Week.addInstance(true);
    Table1._Codes.addinstance(true);
    This should add a row to each repeating row in one button.
    Please note that the parameter for the addInstance is either 0 (false) or 1 (true), which relates to whether the row will be data merged with the form.
    Hope that helps,
    Niall
    hmmm, see you have another thread on this: add multiple rows with add a row button ???

  • Add row not working if more than 5 records are displayed on the screen

    Hello all,
    Does anyone know why the add row button on an sql updateable report would stop inserting a blank row for data entry when more than 5 records have been entered into the form? I can insert up to 5 records. After that, a blank row is no longer supplied by the button. Odd. Have any ideas?
    Any assistance would be greatly appreciated!!!
    Michelle

    You're welcome, Michelle!
    The "Maximum Row Count" setting determines the maximum number of rows Apex will, or could, retrieve for a report. In your original settings, this was only 15, so matched the numbers of rows on a page - therefore, you would (A) only have one page of records and (B) never see a "New Row" as that would be record number 16 (or something higher than 15), which Apex would ignore!
    One thing to note, though, is that some of the pagination schemes (the ones with a "Z" in the description) will count the full number of records available every time the report is loaded - for small tables, this is not an issue but for large tables, you may want to use one of the other schemes.
    Andy

  • Add row to tabular form pagination problem when sorted

    Hi,
    I have a problem with a tabular form that has various sortable columns. If the user tries to add a row when the sort order is set to something where possibly the nulls are appearing first in the list, then the user cannot enter any data (since the last page of results is always shown after clicking the add row button).
    I know the empty record is in the list somewhere since the pagination page count is increased by 1, but there is no way for the user to enter data into that record since traversing back pages then removes the empty record. How can I fix this? Is it possible to programatically reset all column sorting?
    Cheers!

    Hi,
    Sort orders in reports are stored as user preferences - these can be removed using PL/SQL. Have a look at: Need to do column SORTING only when I click the column heading and Re: Default sort and pagination placement not working in reports
    Or, you could try adding a blank row in your SQL statement itself: Problems With "Add A Row"
    Andy

  • FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts.  When I try to call a contact with an iPhone, its connecting then fails.  When someone try to FaceTime me,I try to access but it says connecting then fail

    FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts.  When I try to call a contact with an iPhone, it says connecting then fails by ending automatically.   When someone try to FaceTime me,I accept but it says connecting then fail.  I only have a MacBook Pro to FaceTime and not an iPhone.  I was informed that I should be able to FaceTime from my laptop via video call without an iPhone.
    Please advise.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    1. The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    2. Connect to a different network, such as a public Wi-Fi hotspot, and try again.

  • How to trigger a workflow when a bank record of an employee is delimited

    Hi Friends,
      I want to trigger a workflow when a bank record of an employee is delimited(Infotype  IT0009). When delimiting the bank info, the old record's ENDDA is changed and a new record is created with the BEGDA. In this case two events are triggered one is BANKDETAIL-CREATED and other one is BANKDETAIL-DELETED.
    Which one should i use to trigger my workflow.
    Note : If we use the creation of new record for triggering workflow, then in case when the record is created for a new employee then the workflow will be triggered. To control this can we check whether there is an existing entry in IT009 for the employee or not. If an entry already exist then trigger the workflow else not. Is this ok? Please advice.

    Hi sapient,
    Here i think none of the events would actually help you in achieving what you want because you want to trigger the workflow when the account is delimited not when the account is either created or deleted.Please look for some other information to trigger your workflow.Will get back to you if i had any ideas.
    Thanks,
    Bhumika

  • How to trigger a workflow when a info record is changed?

    Hello All,
    I would like to trigger a workflow when the conditions from a info record are changed?
    What business object should be used?
    Thanks in Advance
    Rui

    Hi,
    for these kinds of issues,
    foirst check if a uefull event already exists in the system
    for this you first actiave the event trace: SWELS.
    Then you change the info record.
    And then you read the event log with SWEL.
    If there's no event, you may eventually have to create it in an exit with SAP_WAPI_CREATE_EVENT fm
    Kind regards, Rob Dielemans

  • When someone leaves me a message on my iphone 3g is only records about 5 seconds and then cuts off

    when someone leaves me a message on my iphone 3g it only records about 5 seconds why?

    Talk to your carrier. Voice mail is handled by them.

  • I'm trying to view my movies through itunes and apple TV but only a few appear in itunes when i add to library, they include .avi and mp4 files.  Whys have only a few copied and rest wont add to my library, can someone help? Do I need to convert them?

    I'm trying to view my movies through itunes and apple TV but only a few appear in itunes when i add to library, they include .avi and mp4 files.  Whys have only a few copied and rest wont add to my library, can someone help? Do I need to convert them?

    What are the file extensions of the movies that won't import to iTunes
    What video content works in iTunes
    What video content works with iTunes and mobile devices?
    iTunes:
    Video content purchased from the iTunes Store.
    QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
    Video podcasts.
    iTunes Digital Copies.
    iTunes Store Movie Rentals (Requires iTunes 9 or later).

  • Can i add a sound alert or message when someone comments on a pic of a photo stream when i am only another participant (not owner of the photstream)?

    Hi,
    How can i add a sound alert or message when someone comments on a pic of a photo stream when i am only another participant (not owner of the photstream)? Thank you. Joana

    Joana,
    that should be automatic.
    See: http://help.apple.com/iphoto/mac/9.4/#pht884a8908
    When you like or comment on a photo in a shared stream, a notification is sent to all the Apple devices of the photo stream’s creator and subscribers. You can delete comments you added to a photo by placing the pointer over the comment and clicking the Delete button that appears.
    Usually the problem is the other way round - how to prervent spamming all subscribers to a shared stream from being alerted to each comment on a photo in the stream. Quite a few subcribers have cancelled their subscriptions to shared streams, because they have continously been sent alert messages and could not disable them. It can get rather annoying - there is no way to silently add a few comments to photos and then send only one alert.

  • Duplicates appearing when user adds someone to 'to' field in Outlook 2010 calender invite

    Hi Everyone,
    I have a user that when they send calender invites, when they add people in the 'to' field they will appear multiple times. i.e the contact address, the full email address etc.
    We have re - imaged the PC, re created the users PST file, run outlook in online mode, Moved the users account to another DB, and still no progress, duplicates are still appearing
    See attached screenshot for example
    Has anyone had to deal with this problem before, if so how was it resolved, if it was ever resolved, Help would be greatly appreciated as we are scratching our heads in IT here

    Hi,
    As per the description, I understand that you'll have duplicate email addresses in the To... field when create calendar invites.
    In order to understand the issue more deeply, I would like to clarify the following questions:
    How did he/she "add people" in the To... field? Did he/she directly type email address or pick it from your address book?
    Will the duplicate happen right after adding people in the To... field or after sending the invites?
    Seems you've tried a lot on the machine side, I suggest we first try this on OWA (Outlook Web App) and see if issue persists. This will help to determine whether the issue is on the client side or the mailbox (server) side.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Can't add row to sorted tabular form

    I have a very basic tabular form created using the wizard. The only significant change I made was to the sort order. When I click on the add row button, the new blank row is created at the top of the table. When the number of rows in the table grew beyond the page size (10), the blank row seems to be created at the top, but the form goes to the last page of data so the blank row is never displayed.
    If I remove the ordering then the blank row is added at the bottom and the automatic navigation to the last page shows the blank row.
    How can I modify this behaviour - either add the blank row at the end, or display the first page when adding rows.
    Table Structure
    dt_id (populated by trigger)
    dt_date
    dt_meal_type varchar2
    dt_food varchar2
    Sort order is (dt_date desc, dt_meal_type)
    Apex 2.1.0.00.39 on XE

    Vikas,
    I've had a look at your javascript idea. It took a little bit of figuring out but I think I understand it. I had to modify it a bit so that it cleared the values (I'm not trying to clone anything - I just want a blank record).
    After spending a whole morning on this I still have 2 fairly serious outstanding issues:
    a) When I enter some values into my new blank record and hit Submit nothing seems to be saved and the record just seems to get lost (I suspect I have cleared out some important hidden fields or something)
    b) It doesn't work if the table is blank and I am trying to enter the very first record.
    I'm sure it's possible to fix these issues but I am no javascript expert and I have come to the conclusion that it just isn't worth investing any more time.
    The benefit of Application Express to me is that it is a simple declarative development environment. There are many things I need to be concerned about and javascript just isn't one of them.
    Whilst I wait for the tabular forms functionality to mature, I think I will go back to the good old report + Edit button style.
    Thanks,
    Alastair
    PS. Here is the script I added to the region header (I removed everything I didn't understand and added it back in as and when I needed it):
    <script>
    function addRow()
    var col = html_GetElement('NAME'); // NAME is just an arbitrary column in my table
    var tab = html_CascadeUpTill(col,'TABLE');
    var row1 = tab.rows[1];
    var clone = row1.cloneNode(true);
    var elements = clone.getElementsByTagName('input');
    for (var j=0;j<elements.length;j++) elements[j].value="";
    myNewRow = tab.insertRow(tab.rows.length);
    myNewClone = myNewRow.replaceNode(clone);
    </script>

Maybe you are looking for

  • Adding text in Elements 10

    I opened Elements editor today, and found I could no longer add any text to a new image. I start Elements, go to the editor, create a new image, then add text, and I cannot see the text at all.  Things I have checked: Various fonts Various sizes Vari

  • Printer not printing correctly since installing Mavericks

    My printers are printing incorrect sizes and not centering on the page since I installed Mavericks. I've reinstalled the drivers and still have issues. I'm an artist and have a show coming up. I need to print my images. This is making me crazy! Pleas

  • Finder window won't refresh

    I'm sure this is an old complaint, but I have found few resources that help me understand what is going on. I would like to use rsync to back up portions of my main HD to a second HD. It works fine. The first time I sync'd the directories, the Finder

  • Capturing VGA to DV

    This may be considered off topic, but here goes anyway. I do a bunch of lecture videos. These frequently include software demos. I'm looking for a solution to capture video out from a VGA port directy to DV. I've tried one of those $100 boxes - total

  • I dont know whats going on but...

    Ok so i added this album i was going to buy next month and then today i recieved an email from iTunes and its a recipt saying that i bought the album today but its not in my library it is still in my shopping cart. What do I do??