Triggering of dynamic actions in infotypes!

Hi Experts,
I have Query regarding the triggering of dynamic actions. Have a scenario where I create a record in infotype 21
with subtype 'XX".
On save of this record I need the dynamic actions to be triggered , where I will write the logic to modify the end date of an existing infotype 21 record with subtype 'YY'.
How can I achieve this?
Please help!!!!

Hi,
Just try this.
Goto V_T588Z.
INFTY SUBTY FIELDN FC NO. STEP VARIABLE FUNCTION
0021 XX I INS,21,(P0021-ENDDA)
Regards,
Srini

Similar Messages

How to make use of a Badi in dynamic action on infotype?

Hi...
i need to create a dynamic action on infotype 6 to create a record in infotype 207.
I have to use badi for it.
i need to use 'f' for 'Indicator for step'. right?
kindly help..
Thnx and regards.
Abhi.

Hi,
Using F calls a routine and not BAdI.
If record will directly be created then there is no need to write Z program and calling it using F indicator. However, in case there is some logic which can not be written directly in the Dynamic Action then you need to write that logic in a routine and call it using F indicator.
VK

How to maintain Dynamic Action for Infotype 2 .

Hi SAP-HR Experts .
I want to maintain Dynamic Action for Infotype 2 .
If Employee's No. of Children exceeds then System immediately ask for maintenence of IT-21 also at the same time .
How to maintain code in table V_T588Z .
Please elaborate it .
Thanks & Regards : rajneesh .

Hi kanupriya .
your reply was Very helpful for me u2026But i unable to achieve the desired result . I maintained the entries in View V_T588Z like this .My Objective is when some body update the Infotype 2 for a employee , and his/her no. of Childrens exceeds by 2 then system should jump into IT-21 for
updation of IT-21 at the same time . I think this what Dynamic Actions work out .
==========================================================
     ANZKD 04 500 P PSPAR-TCLAS='A'
     ANZKD 04 175 P T001P-MOLGA='40'
     ANZKD 04 176 P P0002-ANZKD>='2'
     ANZKD 04 177 I INS,0021,2,01
     ANZKD 04 178 I INS,0021,2,02
==========================================================
Please suggest me what to do , as the above entries are not workout .
Your help will be very appreciated.
Regards ,
rajneesh(9873607039)

BADI, User Exit or Dynamic Action for Infotype 24

Hello,
in PA30, our HR admin team want me to write an Infotype 19 record when a user amends or creates an Infotype 24 record.
I spent all day yesterday trying to find a solution to this.
Can anyone please tell me:
1) Do dynamic actions work for IT0024? - our HR admin suggest that they don't as there is no 'subtype'.
2) Should user exit PBAS0001 (function EXIT_SAPFP50M_002) work for IT0024? I have tried putting in a test display which should appear on save of IT0024 and this does not appear to work.
3) Will BADI HRPAD00INFTY work? If so, does anyone have an example of code that tests the 'old' IT0024 record before modification - the documentation does not help too much with a good example. I'm planning to use this as a last resort due to the need for an access key.
Many thanks in advance,
Keiron.

The BADI is probably the best way to go. You should not need an access key - you do not put your code in the BADI, but instead create an implementation of it in a Z name range. Go to SE18 for the BADI and display it, and select menu option implementation--->create. Give a Z name and then you will have a place to put your code. You can double click on the methods shown in your implementation to get to the ABAP code editor.
Exit PBAS0001 should also work - put a breakpoint in it to see if it is called.
Both the BADI and Exit are called at almost the same point in the SAP PA30 code - however the BADI is called in some cases when the exit is not. It is outside an additional IF test in the SAP code.
Andrew

"Dialog region" plugin - triggering OK dynamic action

Hi all,
I'm attempting to utilise the "Dialog region" plug-in found here
http://www.apex-plugin.com/oracle-apex-plugins/region-plugin/dialog-region_30.html
It's appearing ok, but I initially had trouble associating a dynamic action with the "OK [Dialog Region]" event.
Someone asked the question back in 2011, but didn't provide details on how they implemented the dynamic action.
jQuery ids in Apex dialog region plug-in
I initially issues is because the DA definition still asks for a "Selection type". After trying a few variations, I modified the plug-in to associate an ID with the OK button, and attempted to use "#btn-ok" for a jQuery selector, but this still didn't fire the DA.
At the time my button rendered as
<button type="button" id="btn-ok" class="ui-button ui-widget ui-state-default ui-corner-all ui-button-text-only" role="button" aria-disabled="false"><span class="ui-button-text">Ok</span></button>I ended up succeeding using "DOM Object" of "document" (I thought I had already tried this...), the same way I implemented "Manual Close" for the Skillbuilders modal, but I was wondering if there was a different/more elegant solution?
Scott

Refreshing a region through javascript can be done like this:
$("#region_or_item_id").trigger('apexrefresh');So ideally you would specify 1 attributes for your dynamic action for entering region ids. You'd then need a little parsing for the provided string.
For example, i'd expect a comma-separated list.
-- change the region list into a list of jquery selectors
l_regions := REPLACE(p_dynamic_action.attribute_01, ',', ',#');
-- jquery will fire the refresh for each selector
l_result.javascript_function := 'function(){$("'||l_regions||'").trigger("apexrefresh");};';However, refreshing items... Items mostly get their value from the automated row fetch process, and have no individual refresh. You'd need to actually query the table again for the newest value and put this in the item value (keeping in mind that protected items would also need altered checksums). To do this dynamically, you'd also need an ajax callback. Here you'd need to run provided sql which retrieves a value, and put this in the provided item. If that is a route you want to explore, then you can use apex_plugin.util.get_data and its friends to assist you with that!

Dynamic actions in infotypes

Hi all,
I am calling one infotype(i.e 22) three times in my infogroup but when i write a subroutine on this infotype, it doesn't get called more than once.
I want my infotype to be called three times.
Yogesh

Hey Bro,
can you please explain the issue a bit clear ....

Re: Dynamic Action is not triggering in LSMW Recording

Hello All,
In SAP HRMS personnel actions if i do using LSMW Recording it is not triggering the dynamic actions.
Is there any mechanism to Trigger dynamic action in LSMW Recording ?
How to find the differences in process with and with out recording ?
Small help is also highly appreciated.
With Regards,
Sunil,
+91-9903695384.

Yes. Do one thing. First study the dynamic action. Try to understand what the dynamic action is doing. Is it creating data in other infotype or is it updating some other table. Once it is clear what the dynamic action is doing then you can try to implement the same logic in LSMW. In LSMW there is a provision to add more than one recording and this recording can be called based on some logic..
Thanks & Regards,
Sandip

Dynamic actions and PA-PD integration a problem

Are you aware of an update problem with MSS and PA-PD integration? This information was made available in a presentation to us last year. Was this issue resolved in mySAP ERP 2004?
Dynamic actions and PA-PD integration a problem
Dynamic actions and PA-PD integration are not
processed on updates made from the web (but in the
background through a batch or call transaction session)
Thats why most standard PCRs require HR to process
the transaction using the SAP GUI in the foreground
This normally affects changes to infotypes 0000 &
0001
Then the next slide states:
Workaround for dynamic actions
Review dynamic actions in table T588Z (use SE16 to
display) and document the infotypes and values that
trigger dynamic actions
Incorporate those infotypes into your background
processing and web forms (if necessary)
Workaround for PA-PD integration
Include the integration steps for these infotypes in your
background processing (just as in conversions)

Hi John,
Not sure if it is fixed.. or can be fixed.. we are still in 47 & Use custom code to account for Dynamic Actions.. the PCR processes use the function module HR_MAINTAIN_MASTERDATA to update the infotypes. This function mimics a BDC & hence cannot handle Dynamic Actions... Basically, the issue is not with MSS but it is the way Dynamic Actions work.. to quote SAP "Dynamic actions are not correctly processed in batch input sessions since in batch input the sequence of the screens needs to be predefined correctly. To be able to process dynamic actions in batch input, the checks of the dynamic actions need to be programmed when creating the batch input session. To avoid errors when programming and running the session, the static actions only are processed in batch input. Calls of infotypes that are triggered by dynamic actions should be realized by separate Transaction calls.
Please take a look at OSS Note #386027 for additional info about Dynamic Actions.
Regards,
Suresh Datti

How to process Dynamic Action in BDC

Hi friends.
We are using HR_INFOTYPE_OPERATION to update some infotypes. The problem is that dynamic action does not get triggered as SY-BINPT = 'X' when we use this FM or BDC to update.
Now, is there any workaround so that we can process dynamic actions via our program?
Can somehow we call the subroutine DYN_ACTION from our program? Can the values of PSAVE etc be availabe in our program?
Thanks in adv!

Hi
Its kind of complicated to code dynamic actions in your BDC code. However , I would try my best to make you understand.
1. Make a BDC recording of the source screen.
2. Dynamic actions are stored in table: T588Z. Now during your screen processing of BDC data, you have to check the conditions yourself whether this was the condition which triggers the dynamic action.
3, Make another BDC recording of the target screens which are called due to dynamic actions. Now if the condition in the source screen is fullfilled and you have to call a dynamic action then direct your program flow to the BDC recording of the target screen and update all the fields which would be updated by Dynamic Actions in the normal user interaction of that screen.
In short, you have to program all those things which Dynamic action does since BDC does not support dynamic actions.
Reward points, if helpful.
Regards
Waz

Dynamic Action on "Get Focus" After Closing a Popup Window

Hi,
From one of APEX Application Pages I am calling a Popup Window where users can create a new record. In the Popup Window once the record is created and window is closed, I want to refresh the region on the main page to show the record created in the popup window.
How do I create a dynamic action which will fire when the main APEX window gets the focus (after the popup window is closed). ?
Any pointers will be greatly appreciated.
Thanks & Regards,
Ashish Agarwal
http://www.asagarwal.com

Assuming that you have a dynamic action in the parent page which refreshes the region
<li> Make a note of the event which triggers your dynamic action, lets call this event A.
<li> Create a JS function in parent page which triggers event A when called.
For example if your Dynamic Action trigger is a button(id ="P100_REFRESH") press event
Your JS function could be
function Trigger_refreshRegion()
$('#P100_REFRESH').click();
The way in which you simulate the Dynamic action deoends on the firing event that you have used, so modify it appropriately.
<li>Now in the pop up page, if you are closing the page in JS using smthing like window.close() or so,
just call the parent page's refresh JS function there using the
opener.Trigger_refreshRegion(); //whatever was the name of the function that you created.

Dynamic action in column of classic report

Good day master!
Hi im new in apex,, so im dynamic ondering if its posible to create a dynamic action in the column of classic report in apex?
i'm trying but its not working my problem goes like this..
i have a classic report stock_replenish
columns
item_code
price
supplier_name
item_code is a pop-up loved by sql
what i want to do is when the user choose a item_code it will also return the price and supplier_name
i can do that in apex form but i dont know if iits posible to clasic report?
please help!
ty
Myke;l

Dynamic action on report columns is possible but not as straigth forward as on items.
First you can't select "report colum" as selection type for the dynamic action. Use jQuery Selector instead.
See the [url http://api.jquery.com/category/selectors/]jquery documentation on possible selectors.
I prefer to use something like[name='f01'].
Use the developer tools of your browser to see the name of your report column.
Because you can't submit a single report cell value with the action "Set value".
You have to use a combination of a action "Execute javascript" and a ondemand process.
The javascript code is something like
var elementId,idParts,row;
/*Determine the id of the element that has triggered the dynamic action*/
elementId = String(this.triggeringElement.id);
/*The id of a item in a report column consists of to parts the name and the rownumber*/
idParts = elementId.split('_');
/*The second part is the rownumber we need that to set the value in the right row later on*/
row = idParts[idParts.length-1];
/*This calls the ondemand process*/
apex.server.process ( "MANAGER_EMAIL", {x01:$v(this.triggeringElement),x02:row}, {success: function( pData ) { $s(pData.r,pData.d) }} );apex.server.process(name ondemand process,values to be submitted,options)
{x01:$v(this.triggeringElement),x02:row}
This submits the values of the triggering element and the row on which all the action is happening.
x01 refers to apex_application.g_x01
{success: function( pData ) { $s(pData.r,pData.d) }}
The succes option defines a function that is executed upon succefull completion of the ondemand process.
The ondemand process returns a json object. Which we can refer to in the javascript function with pData.
In our ondemand process we are defining the json object as having to properties.
d and r . d is the display value and r is the id of the element to be set.
$s(r,d) is a [url http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/javascript_api.htm#CDEEIGFH]apex javascript function that sets the value d to item with id r.
Now the server side code. This is an application process with process point Ondemand.
Which is something like this.
declare
cursor c_emp(b_employee_id in number)
is
    select emp.email
    from   oehr_employees emp
    where emp.employee_id = b_employee_id
col_emp_email oehr_employees.email%type;
v_regel       number;
begin
/*Get the employee email*/
open c_emp(apex_application.g_x01);
fetch c_emp
into col_emp_email;
close c_emp;
/*Calculate the rownumber do this only if the triggering element is a popup lov*/
v_regel := to_number(apex_application.g_x02) + 1;
/*Create the json header*/
APEX_PLUGIN_UTIL.PRINT_JSON_HTTP_HEADER;
/*Print out the json object*/
sys.htp.p('{"d":"'||col_emp_email||'","r":"f03_'||lpad(to_char(v_regel),4,'0')||'"}');
end; For specification of the JSON notation see [url http://www.json.org/]http://www.json.org/
To see this in action I have set up a [url http://apex.oracle.com/pls/apex/f?p=VANBAREN_FORUM_TRY_OUT:TBDA:0&c=VANBAREN]demo.
Change the manager and the manager email will change.
I hope this is enough to get you started.
If you have a problem in translating the above code to your specific situation set something up on apex.oracle.com. Then the help can be more specific to.
Nicolette

Testing Dynamic Actions

Hello,
     I had created a dynamic action for a custom infotype 90X9 in which I am comparing a field(FIELD1) if it is initial i am maintaining a record in 90Y9 infotype.
    Through PA30 I created a NULL entry for the FIELD1 for a employee (EMP1) for infotype 90X9 and then I checked 90Y9 hoping that maintained value in dynamic action will fill the infotype 90YP, But this had not happend.
     Is this the correct way to TEST it? Please suggest a TEST method if it is wrong method to test this dynamic action scenario.

Hello
You know what is the most interesting thing about your test case? You are trying to copy the NULL value between infotypes. Well, is the test case not working only for NULL values or all values?
Can you also mention following about your dynamic action?
Infotype:
Subtype:
Field Name:
Function Character:
Sequence Number:
Indicator for Step:
Variable Function Part:
Thanks
Anand

Dynamic Actions in Oracle APEX

Hello all,
I am using Oracle APEX 4.0.
In an application, on a page I am using two standard dynamic actions
to show particular items to the user.
The first one is working fine but when I select the item which
triggers second dynamic action the result of first one is
reverted.
I tried all the three event scopes bind, live and once.
But it didn't worked out. Please suggest something?

Your question is very vague, you ll have to provide more details about what each of those dynamic actions does.

Dynamic Actions with Multiple Actions Capability

Dynamic Actions with Multiple Actions Capability
How can I get Dynamic Actions to work on Actions that are stored solely on IT0302 due to the multiple relationship to a previous Action that is stored on both IT0302 and IT0000?
When multiple actions on a given day are executed, the dynamic action from the first action entered is executed twice - when it should only execute the first time with the second actions dynamic action triggering the second time.
Thanks

When there are multiple actions with the same effective date the wrong dynamic action is triggered. For example, if I have an Expat Return To Home action followed by an Internal Move action with the same effective date the below events occur:
1. IT0001 is updated due to Expat Return to Home - triggering the Dynamic Action off of IT0000 which is Expat Return to Home (Correct)
- Action is stored on IT0000 and IT0302
2. IT0001 is updated due to Internal Move - triggering the Dynamic Action off of IT0000 which is Expat Return to Home (Incorrect - background processing creates data not needed)
- Action is stored only on IT0302
Question:
How can we leverage Multiple Actions with the same effective date while continuing to use Dynamic Actions?

Buttons and Dynamic Actions

When triggering a dynamic action from a button, I'd like to prevent the page from submitting. Following the advice from earlier threads, I have set the button to redirect to a URL. But since the dynamic action will be performing all the required actions, I'd like the URL invoked by the button to do nothing.
What is the best practice for allowing the button to do no more than initiate the DA?
Thank you
CS
Edit: Alternatively; instead of triggering the DA using an "onclick" event on the button, can I invoke the DA by naming it as the target URL. That would be the preferred solution I think.
Edited by: ChrisS. on Jul 31, 2011 4:50 AM

Thank you very very much Little Foot.
Coincidentally, I just read earlier today an answer from Anthony Rayner to an unrelated question which mentioned this neat solution in passing. After hours of trawling through W3 schools in vain...
CS
Edit: PS Sorry Little foot, I already marked Tobias's answer as correct, so I could only give you a helpful
Edited by: ChrisS. on 06-Sep-2011 05:49 Edit: PS Sorry Little foot, I already marked Tobias's answer as correct, so I could only give you a helpful

Triggering of dynamic actions in infotypes!

Similar Messages

Maybe you are looking for