Triggering workflow when saving the infotype 0023 in PA30

Hi all,
I need to trigger the workflow and send an external mail when i give the datas in the infotype 0023 and save it in PA30. Kindly do the needful.
Thanks and regards,
Ashu

Make use of the BO
EMPLOYEEI  (Employee information)  and the method that you have to assign to the task is CREATEINTERACTIVE and the event that you have to use in the START EVENTS of the workflow is CREATED
go through the BO in SWO1 Txn you will get the IDEA
Any Queries Revert Back

Similar Messages

  • Print program is not getting triggered when saving the application

    Hi all,
    My requirement is when i save the invoice using VF01 the print program should get triggered.
    The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
    The setting "send immediately (when saving application)" is also checked.
    I need to configure it for VF01 transaction.
    The error message displayed was " please maintain output device in master data".
    Regards,
    Umesh

    Hi Umesh
    Please check if you have missed any of the following:
    1. Defining Access Sequence(can use existing).
    2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
    3. Output Determination Procedure
    4. Assign Output Procedure to Billing Types
    Kind Regards
    Eswar

  • In VA02 transaction which exit is triggering when saving the data

    hi all sap gurus,
    In VA02 transaction which exit is triggering when saving the data

    Hi Reddy,
    The <b>user exit</b> and badi tried for this transactions are
    V60F0001                SD Billing plan (customer enhancement) diff. to billing plan
    V46H0001     SD Customer functions for resource-related billing
    V45W0001     SD Service Management: Forward Contract Data to Item
    V45S0004     Effectivity type in sales order
    V45S0003     MRP-relevance for incomplete configuration
    V45S0001     Update sales document from configuration
    V45P0001     SD customer function for cross-company code sales
    V45L0001     SD component supplier processing (customer enhancements)
    V45E0002     Data transfer in procurement elements (PRreq., assembly)
    V45E0001     Update the purchase order from the sales order
    V45A0004     Copy packing proposal
    V45A0003     Collector for customer function modulpool MV45A
    V45A0002     Predefine sold-to party in sales document
    V45A0001     Determine alternative materials for product selection
    SDTRM001     Reschedule schedule lines without a new ATP check
    <b>Business Add-in</b>     
    BADI_SD_SCH_GETWAGFZ     Scheduling Agreement: Read WAGFZ from S073
    BADI_SD_V46H0001     SD Customer functions for resource-related billing
    <b>Reward pts if found usefull :)</b>
    Regards
    Sathish

  • Is it possible when saving the psd file to have an automatic jpg file saved at the same time?

    My work involves preparing images for printing lightboxes and window installations.  My clients require to pre-approve the photos before printing.
    I usually save my files as psd but since the files are very large in this format I usually save another copy as a jpg file that has a much smaller file size.  This makes it possible for me to add these to a presentation and and send them to my client.
    Is it possible when saving the psd file to have an automatic jpg file saved at the same time?  Or do I still have to do this manually?

    If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette.  You may be able to write a Photoshop that would do as save as Jpeg,  And you should be able trigger its execution by setting up a Script Save event using the Script event manager.  When You do a manual save  the script should be triggered.  I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event.  I have only use open events.

  • Inserting Pricing condition in Sales order when saving the sales order

    Dear ABAPers,
           My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
    In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
    How to do this.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    I have Solved this Problem.
    Thanks & Regards,
    Ashok.

  • User Exit or BADI for Tcode IW31 when saving the Service Order

    Dear ABAPers,
            I would like to add one more line in Service order item when saving the Service order in (IW31).Is there User Exit or BAdI.It is very Urgent Please help me.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    These Exits does not meet my requirement.
    These Exits are not called at the time of saving Service Order.
    Thank you for your valuable reply.
    My Requirement is when saving the service Order  i want to add the Line itm at runtime.
    It is very urgent requirement.Please help me.
    Thanks & Regards,
    ashok.

  • User Exit or BADI for IW31 when Saving the Service Order

    Dear ABAPers,
            I would like to add one more line in Service order item when saving the Service order in (IW31) at runtime.Is there User Exit or BAdI.It is very Urgent Please help me.
    Thanks & Regards,
    Ashok.

    Hi
    U can go through the tansaction.
      System/ Status
      Double click on program name.
    For badis:
    Search for the Phrase:
      cl_exithandler=>get_instance.
    U will the badi definitions.
    For User exits:
      search for the phrase: CALL CUSTOMER-FUNCTION
      u will get the user exits.
    If it is helpful rewards points.
    Regards
    Pratap.M

  • History of the Infotypes deleted through PA30.

    Hi FOlks,
    Is it possible to see the history of the Infotypes deleted through PA30.
    Eg: In IT2001 sick leave applied on 20.01.2009 being deleted though PA30. After this deletion, would we be able to see who has deleted and what record has been deleted???
    If u2018yesu2019 wht is the tcode to see that???
    Rgds,
    Sekar.

    Hi,
    As mentioned by Archana,
    SE38 > RPUAUD00 > execute > Give PERNR in personnel number field > give IT2001in infotype field > select long term documents > Excecute > Double click on particualr recors > the you can see old value and new value. There is column named action. From that column you can see whether particular record is created or updated or deleted....

  • Giving error message when saving the Query

    Hello,
    I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
    Error Message:
    u201CThis internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
    Could any one please suggest me how can I over come with this problem.
    Thanks
    Prathap.

    Hi Prathap,
    There is some problem in the definition of the Query.
    Please click on the check button before saving the query, it gives where the problem exists in it.
    Hope it helps.
    Veeerendra.

  • Error getting when saving the sales document in third party sales order

    in third party sales order,when i am saving the sales order i am gettingthe following error
    subsequent function 'purchase requistion from sales document' not possible due to credit block.earlier i have maintained credit checks for some customers,but for this customer i have not maintained any credit check. i dont know why system is blocking for this customer also.pls help me where i went wrong.
    highly rewarded if help full.
    thank you

    Please go to FD32, check any default risk category and credit limit is maintained for the customer.
    Also check OB45, any default risk category & credit limit is maintained for the credit control area.
    Also, which order type u r creating sales order? for that order type, Goto VOV8, remove the credit grp and credit check settings.
    Also goto XD02, check in sales area data, billing tab, credit control area field, please remove that also.
    Hope it Helpful.
    Reward points if useful..

  • Problem when saving the outline

    Hello:
    We're working with Essbase 9.3.1.
    When saving an outline with EAS, the message windows "Starting save of outline" appears and it never close (even if the modification is as simple as adding an alias or an UDA). We've found that If we make Ctrl+Alt+Supr and press cancel in the client machine, the message disappear inmediately. So, it seems a Java problem. Does anyone knows any solution for this issue?
    Thanks in advance and regards,
    Joaquin Castellano

    Hi,
    I take it you are accessing EAS through the web client, if you it will probably down to using the 1.6 JRE.
    You can install the 1.5 JRE and go to control panel > java > Java > disabled the 1.6 versions and keep just the 1.5
    Or you can have a read [here |http://john-goodwin.blogspot.com/2008/09/never-ending-eas-outline-save.html] for futher details
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • User exit when saving the financial document (VX11N)

    Hi,
    We are creating financial document as a letter of credit using transaction code VX11N. User would like to have some checking on the fields based on some user defined logic. Is there any user exit that can be used to serve this purpose. I am looking to usre exit similar to when saving sales order (i.e: USEREXIT_SAVE_DOCUMENT in MV45AFZZ).
    Regards

    Hi,
    Check below link for all SD user Exits.
    https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
    Best regards,
    Anupa

  • Ps assembly processing:WBS have not be created when saving the sales order

    In the ps assembly processing, I want to generate a network when I create a sales order.  So I did the following steps:
    1-Use the TCODE cj91 to create a standard WBS "E-000007.1".
    2-Use the TCODE cn01 to create a standard network "10000000" and assign the standard WBS "E-000007.1" to it.
    3-Use the TCODE cn08 to config the Network Parameters from Sales Order like below:
    Material number : 600000-000000-0009
    Order Type      : Z301
    Std network     : 10000000
    Class Type      : 020
    Network Profile : Z0001
    MRP Controller  : 001
    Std WBS element : E-000007.1
    4-Use the TCODE va01 to create a sales order and add an item with the material "600000-000000-0009" and save.
        When the SAP R/3 System is saving the sales order, a WBS ought to be created u2013 based on the assignment of the standard network to the standard project.But I could not found the WBS.I thought I have do all of steps and could not found the reason.
       So I need the experts give me some useful advice and reference to resolve the problem.Thank you.
    Regards
    Yoda

    Hi,
    Maintain strategy group in material master MRP tab....
    If problem still persist then check is there any credit block to that customer...if it is release it in VKM3....
    Once you release it will create automatically.
    Regards

  • Error when saving the RFQ

    HI all,
    Iam creating a standard RFQ manually through purchasing>RFQ's and quotations>RFQ.
    But when iam saving the RFQ, iam getting an error like,
    Please enter the required value for the Purchaser's Phone Number segment in the PO Headers flexfield.
    Please help me to get rid of this error.
    with regards
    vijay

    HI sandeep,
    Your reply solved my purpose. Can you also please tell where That particular Flex field is located in PURCHASE ORDERS window.
    Thank you,
    vijay

  • "Message Processor" does not get assigned when saving the document.

    Hi folks!
    When creating a support message (SLFN) and saving the document usually the BP of the current user got assigned to the partner funtion "message processor".
    This used to work but does not anymore. Now I cannot find the reason why.
    I think I could achieve this via customizing "Make Settings for Change Transaction Types" and using "Specify Copy of Current User" but I am pretty sure this was not customized before.
    I could use partner determination procedure, too. Access sequence "User" but still I am not sure this was customized before.
    I am using SLFN transaction type service provider scenario (SLFC0001)
    Anyone got an idea?
    Thanks in advance.
    Regards
    Edited by: Christian Kaunzner on Mar 25, 2009 5:15 PM

    Hi Christian,
    did you solve this issue on your own? can you share your experience?
    thanks
    Pedro Rodrigues

Maybe you are looking for