Error getting when saving the sales document in third party sales order
in third party sales order,when i am saving the sales order i am gettingthe following error
subsequent function 'purchase requistion from sales document' not possible due to credit block.earlier i have maintained credit checks for some customers,but for this customer i have not maintained any credit check. i dont know why system is blocking for this customer also.pls help me where i went wrong.
highly rewarded if help full.
thank you
Please go to FD32, check any default risk category and credit limit is maintained for the customer.
Also check OB45, any default risk category & credit limit is maintained for the credit control area.
Also, which order type u r creating sales order? for that order type, Goto VOV8, remove the credit grp and credit check settings.
Also goto XD02, check in sales area data, billing tab, credit control area field, please remove that also.
Hope it Helpful.
Reward points if useful..
Similar Messages
-
GR date (MIGO) as the Billing date in Third Party Sale
Dear All,
I have a scenario where the GR date should be the billing date in third party sale.
Can it be accomplished by any user exits of billing? Please share your ideas and if this can be done through user exit, please name the user exit.
Thanks in advance.
Regards,
Ipsithi,
read sales order number or PO number or get the information from document flow of VBFA if pO exists thengo to PO history in EKBE table if BWART - 101 then trigger billing document with reference to SALES ORDER on the same day.
for that you need to create a Back Ground Job in SM36.
balajia -
Come here and discuss the business process of Third Party Purchase Order?
come here and discuss the business process of Third Party Purchase Order?
when this po is used and the following process is what?Hi YuLin
It is a vague topic..anyways i will tell you one important scenario of the 3rd party order :Third Party Without Shipping Notification(its imp one)
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you.
In this scenario, the vendor does not send a shipping notification. The incoming invoice from the vendor updates the billing quantity, so that the customer-billing document is only possible after entering the invoice from the vendor
Function List
The following functions are provided to support the Third Party Without Shipping Notification (J55) building block:
When the order is created, the specification of material numbers, quantity and conditions takes place at item level. As the material is not available on stock, a purchase requisition is created directly within the sales order.
Purchase Order Processing
The purchase requisition can already be automatically assigned during creation. If not, it is possible to assign the purchase requisition manually. The purchase order is created with reference to the purchase requisition. The quantity and the material are transferred from the sales order. The purchase order price can now also be determined using condition records.
Vendor Invoice Verification
The vendor invoice verification must take place before customer billing. The quantity of the invoice updates the quantity to be invoiced in the sales order.
Billing Documents
The billing documents are carried out on the basis of the order. Since the vendor might not deliver the exact quantity ordered, quantity adjustment takes place through the quantity in the vendor's invoice.
Controlling
The revenue and costs will be posted to CO-PA via the billing document
Key Points
As no shipping notification is available, the customer invoice can only be created after having finished vendor invoice verification.
Normal process you can refer in help.sap.com under this link
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b91d843ad11d189410000e829fbbd/frameset.htm
regards
Yogesh -
Error while Creating PO from Purchase Requistion in Third Party Sales
Dear Team,
While Creating the Purchase Order from Purchase Requistion in Third Party Sales. When I am saving the PO I am getting the Error in GL Account Cannot be Used. I have disabled the field G/L Account in settings of Account Assignment Category of Third Party. Still I am facing that Error while Creating Purchase Order. Can you guide me where we do this Assignment of G/L Account so that I can change the G/L Account.
Thanks,
Farhan.Dear Farhan,
1. Go to T. Code: FS00 and enter GL number and Company Code and go to Tab: Create/bank/interest, write down the field status group.
2. Go to T. Code: OBC4 and Select your Field Status Variant and Double Click: Field Status Group (From Left-hand Dialog Structure)
Double-Click on to Field Status Group (as noted down from in Step 1).
From Select group, Select Additional account assignments and make Earmarked Funds, as optional.
Best Regards,
Amit -
No CO-PA document on Third party Sales Order
We are doing Third Party Sales orders with Purchasing and Invoice REceipt, via the following process.
1 Sales order, 2) automatically creates the req via sales order, 3) delivery of sales order, 4) create the purchase order from the req. 5) post goods issue on the delivery, 6) Post goods receipt on purchase order, 7) bill and 8) invoice via miro.
the issue we have is that the variance(cOGS-PPV) account on the Miro does not go to CO-PA .
I believe that it is due to the Third Party sales order . re- oss 322497 and 772345.
Has anyone found a solution or have a similar problem.
I know that this is different from normal third party which does not deliver and receives PO and MIRO before the billing.Hi Jeffrey,
If the corresponding purchase order belongs to a third-party deal,
please have a look at note 322497.
This would explain the behaviour that you are describing.
As explained in the note, during goods or invoice receipt for a
third-party transaction, as of Release 4.6, the system no longer
writes a line item in the costing-based profitability analysis.
Unlike the processing of a third-party deal in front of release 4.6 the
update of the goods receipt or the invoice receipt is not therefore
anymore required from the release 4.6 in the costing-based profitability
analysis.
You may find further information on the topic in SAPNET
(intranet.sap.com/co-pa):
within "Actual Data","third party business/business background"
Regards,
BC -
User exit when saving the financial document (VX11N)
Hi,
We are creating financial document as a letter of credit using transaction code VX11N. User would like to have some checking on the fields based on some user defined logic. Is there any user exit that can be used to serve this purpose. I am looking to usre exit similar to when saving sales order (i.e: USEREXIT_SAVE_DOCUMENT in MV45AFZZ).
RegardsHi,
Check below link for all SD user Exits.
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
Best regards,
Anupa -
Giving error message when saving the Query
Hello,
I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
Error Message:
u201CThis internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
Could any one please suggest me how can I over come with this problem.
Thanks
Prathap.Hi Prathap,
There is some problem in the definition of the Query.
Please click on the check button before saving the query, it gives where the problem exists in it.
Hope it helps.
Veeerendra. -
Error Message when saving the workflow in SWDD.
I have raised this question before in the forum, but I still don't have answer.
When I try to save the modified workflow or activate it, I have the error message like:
Message Type X,
The current application triggered a termination with a short dump.
Analyse des erreurs
Short text of error message:
Control Framework : erreur when a control release !
Technical information about the message:
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Does anyone have some clue on that??This is from the long text for this message:
Control Framework : Error processing control
Diagnosis
An error occurred when the system tried to process the commands from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support Package, the current kernel, and GUI patch for the release of your system
2. Check whether the error occurs locally on one or a few PCs, or generally on all PCs. Note whether the error only occurs for some users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem with the PC. Check the installation; if necessary, reinstall the software. In the dump, search for the SY-MSGLI field, since it may point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note 158985).
4.Start the transaction and continue until the screen immediately before the dump.
5. From the System -> Utilities menu, choose Autom. Queue, Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will display the ABAP call that caused the error; the Automation Trace will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to sapservX, so that SAP can analyze them.
There are plenty of options stated in this message which could cause the problem, I suggest you start with those.
Kind regards, Rob Dielemans -
How do I get refunded for the purchase of a third party app?
I have purchased an app called crestron mobile pro on Saturday 2-15, when I actually needed the crestron mobile pro g version. How do I get refunded for the wrong version of the app, which I don't need anymore?
All purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Third party sales order report
Hi
I got to prepare a report and the description is as follows:
"Report for discount pricing conditions manually entered in third party sales orders."
"Discount price reporting for manual pricing conditions in sales order processing (not in billing)"
"The report should reflect manual pricing discounts captured in the third party sales order.The relevant (third party) document types will be confirmed.Currently we have the following pricing condition type used for manual discount: YRD2- Manual Distr. Discount % YRD3- Manual Distr. Discount fixedThis report will facilitate the monitoring on the discounts given to the distributors.We still need to confirm the complete list of discount pricing conditions for the report.The report should extract the manual discount information based on the following criteria:Sales organization, period, sales order, customer (wholesaler and/or third party) and pricing condition type.Summing per sales order, customer, period should be enabled.The discounts should be displayed in document (sales order) currency. "
I didnt understand the following to get the purpose of this report:
1. what is this third party sales order ?
2. What is manual pricing condition?
3. what is manual pricing condition? how many types of conditions are there like this?
4. What is the actual analysis that can be made from the output of this report?
Please explain them in detail. Thank you.THIRD PARTY SCENARIO
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
The processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally, can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing
If a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
You process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Goods receipt will be posted when ever the vendor ships the goods to our customer.
We will do this transaction in SAP using MIGO.
Invoice receipt is done when the Vendor sends us the invoice.. ( I.e Billing ).
It can be done using MIRO.
THe above two steps are standard and manual. There are many other ways that the actual process can happen. If the client follows EDI standards then the Goods receipt and Invoice receipt can be done through IDOCs automatically.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
Regards. -
Documents in Third Party Processing.
Hi
What are all the documents that get created in Third Party Sales Processing?
I am confused as to whether we create a delivery for the purchase order following sales order or we do just goods receipt followed by invoice receipt. Don't we create the delivery that is made by the vendor to the final customer.If yes, is it done wrf to purchase order from VL10B or wrf to sales order from VL01N.
Plz clarify.
Regards
Mahesh.Hi,
hi
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Reward points if helpful.
Regards,
Amrish Purohit -
Plz requesting kindly for screen shots of intercompany and third party sale
Hi btothers,
Am into new project where we have intercompany sales and third party sales ,can any one plz send me with step by step screen shots to my mail id [email protected]
Thanks & regards,
srinivasHi Srinu,
Please find below the complete Documentation on Third Party Sales and Intercompany Process.
THIRD PARTY SCENARIO:
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
The processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally, can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing
If a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
You process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always following a third party process for a material then you have to create the material using item category group BANS.
The procurement type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurement ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to configure the item category determination
Order type + item cat Group + Usage + High level = Item cat + Manual item cat
OR + NORM + + = TAN + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevant for billing indicator as F
step 4)
The schedule line category for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requisition order immediately after the creation of the sales order and the PO to vendor is created against this purchase requisition.
Intercompany Process:
Go through the explanation given below with test cases.
Business case: -
Customer orders goods to company code/Sales organization A (Eg.4211/4211).Sales org 4211 will accept and punch the order in the system with sold to party as end customer code in the system. Company code/sales org B (Eg.4436) will deliver the goods to end customer and raise an intercom any billing on 4211 with reference to delivery. This can happen only after 4211 raises invoice to his end customer to whom the material has been delivered by 4436.
SPRO Customization required:-
1. Assign plant of delivering company code (Eg.SI81) to sales org/distribution channel combination of ordering company code (Eg.4211/RT)
2. Maintain intercom any billing type as IV for sales document type OR
3. Assign Organizational Units By Plant (Eg.SI81/4211/RT/11)
4.Define Internal Customer Number By Sales Organization (Eg.4436 will create customer master for 4211 company code and that number will be maintained in this relationship:-4211/231)
5. Automatic posting to vendor account (Optional)
6. Maintain pricing procedure determination for 4211/RT/A/1/RVAA01-For customer sales and billing
Maintain pricing procedure determination for 4436/RT/A/1/ICAA01-For intercompony billing
Master data to be maintained:-
1. Create end customer master in company code/sales org 4211/RT/11
2. Create customer master for 4211 company code/sales org in 4436/RT/11
3. Maintain PR00 as price for end customer-Active in RVAA01
4. Maintain PI01 as price which has to be paid to 4436-Statistical in RVAA01
5. Maintain IV01 as inter-company Price-Active in ICAA01
Process:-
1. Create OR with sold to party as end customer.
2. Plant to be selected is delivering plant belonging to different company code. With this selection system will treat this order as intercomany sales.
3. Pricing procedure is RVAA01
4. With reference to this order delivery will be created from the delivering plant and post the goods issue for this delivery.
5. Ordering sales org will create billing document F2 with reference to delivery for end customer.
6. Delivering sales org will create intercompany billing IV with reference to delivery document.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
In Third party sales, Part of MM..?
Hi guru's
Can explain about third party sales and what is major part of work for MM in that.
1.Please send me the overall flow in Third party sales process with Transaction codes.
thanks
sap-mmTHIRD PARTY SCENARIO
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
i think this will be helpful to you -
hi
experts,
can any body explain in third party sales where do we see migo, miro, if possible step by step process.
thanks in advanceCustomize the third party sales in summary:
1. Create Vendor XK01
2. Create Material u2013 Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Regards
Deepak -
Dear All,
I am having good domain in third party business process, i want to configure the same in SAP SD, plz provide me the any doc/link for the same.
Thanks
S.Nileshkumar
[email protected]hi,
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Thanks
Sadhu Kishore
Maybe you are looking for
-
Time Machine Backed Up to Host Computer
Dilemma. Settings in Time Machine were such that when it backed up....it backed up to computer rather than external drive. Now "backup" files are clogging my hard drive but can't find them. I know this because when I go to "about this mac", it indic
-
Windows storage server 2008 R2 ISO
Hi All, from where I can download ISO image for Windows storage server 2008 R2 Standard? The key is written on the sticker which is on the Server which is for windows server 2008 Storage r2.Please let me know can i use this key for windows server 20
-
"error compiling movie: unknown error" in premiere cs3.2 / win8
This happens during both Export and Render Work Area, as soon as the renderer hits one of my assets. Initially, this asset was an uncompressed AVI with an alpha channel, over another uncompressed AVI. You can see the Progress bar suddenly get extreme
-
ORA-01427: single-row subquery returns more than one row -- no solution
Hello to all: I have to tables: Table a anwender (Email,Dept). --> all fields are filled Table b dingo (Name,email,dept) --> all fields are filled I now want to update the table a with the data from table b: update anwender a set a.abteilung = ( sele
-
Multipage PDF different layouts export to Excel format
Problem how to convert 24 page file with different layouts on each page to clean Excel spreadsheet layout. Column layout returned is a mess and could be resolved if individual PDF pages or selected parts of page could be exported. I can send source f