Trim selection lost after "undo"
I select my trim edit points on various tracks, perform some trims. When I "undo" the trims, the selection of the trim edit points gets lost on all tracks but one (all tracks selected), so I always have to reselect all the trim edit points (which is time consuming in the case of L cuts etc.).
Is this a bug or has this always been like that?
I've seen similar behavior with Photoshop and layer selection, so I'd assume it's normal function.
Similar Messages
-
Tree node selection lost after returning from called page
Hi
in a default unbound task flow i have a Page1 calling Page2.
Page1 displays a master-detail data using treetable component, while Page2 displays detail data (selected from Page1) as a read-only form.
When coming back from Page2, Page1 tree node selection is lost and tree table is rendered as if was called for a first time (detail data are disclosed).
How can I restore an original selection?
(Jdev 11.1.2.2)
Many thanx1. before goind to the Page 2, remember somewhere the selected row keys, as follows:
RowKeySet rks = yourTreeTable.getSelectedRowKeys();2. after returning to the page 1, do as follows:
Iterator rksIterator = rks.iterator();
if (rksIterator.hasNext()) {
List key = (List)rksIterator.next();
JUCtrlHierBinding treeTableBinding = null;
treeTableBinding =
(JUCtrlHierBinding)((CollectionModel)table.getValue()).getWrappedData();
JUCtrlHierNodeBinding node =
treeTableBinding.findNodeByKeyPath(key);
RowKeySet newRks = new RowKeySetImpl();
if (node != null)
newRks.add(node.getKeyPath());
callSelectionListener(yourTreeTable, newRks);
// refresh your tree table - ommited here
// where is:
protected void callSelectionListener(RichTreeTable table, RowKeySet discRows) {
SelectionEvent selEv =
new SelectionEvent(table, new RowKeySetImpl(), discRows);
JSFUtils.resloveMethodExpression("bindings.YourVO.treeModel.makeCurrent", // <-- of course, adjust this value to the your selectionListener expression
null,
new Class[] { SelectionEvent.class },
new Object[] { selEv });
} // of makeCurrent()
public Object resloveMethodExpression(String expression, Class returnType, Class[] argTypes, Object[] argValues) {
FacesContext facesContext = FacesContext.getCurrentInstance();
Application app = facesContext.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = facesContext.getELContext();
MethodExpression methodExpression = elFactory.createMethodExpression(elContext, expression, returnType, argTypes);
return methodExpression.invoke(elContext, argValues);
} -
Sometimes, when using an IMAP email account, I delete an email, and hit cmd-z to try to undo the action, and the email would flash back and disappear. And at that point, that email is gone for good. Can't find it anywhere. Is this a known problem in Mail?
Sometimes, when using an IMAP email account, I delete an email, and hit cmd-z to try to undo the action, and the email would flash back and disappear. And at that point, that email is gone for good. Can't find it anywhere. Is this a known problem in Mail?
-
Cannot undo the trim selection and return to original clip
I have a clip 6 seconds long and dragged it into the project. I shortened it to 2 seconds some how. I tried to undo the trim selection. I even deleted the clip from the project and the event. I imported it again. Once I dragged it into the project again, the orange bar appeared and the clip shortened to 2 seconds. I want the full 6 secs. I double clicked and got into the trim clip screen and it will not let me use the handles to expand to the original clip. It can get shorter, not longer. Does this make sense.
There should be little arrows at the bottom right and bottom left of the clip. You can click on an arrow and a handle will pop out allowing you to add frames back to the clip.
You can also drag the whole six seconds back from the Event if that is quicker.
Message was edited by: AppleMan1958 -
Can't select photo after scans for faces
I just bought a laptop with iphoto 09 on it; previously I used 08 (or earlier; can't remember). {Yes I know a new version '11 just came out. Given the number of problems reported maybe I'm not sad about the purchase-timing}.
My library is huge with 30K+ images; I keep it on an external HD. After opening the new iphoto it asked to tweak my library which I allowed. Upon first opening all images seem to be there and selectable, but after it scans for faces (takes hours), I can no longer select a photo, necessary in order to start identifying faces.
I tried closing iphoto and reopening - same thing; images selectable prior to running faces scan, then not.
I tried rebuilding the library. This lost all my keyword structure (I use keyword manager) and after the rebuild bombed failing to import all the images, I deleted the rebuilt library before testing whether it could select images.
My old library does seem as if it should be rebuilt, many images now appear blank as thumbnails though present when selected.
¿ Will rebuilding the library fix the selecting-face scanning problem?
¿ Is there a way to rebuild the library that will retain my keyword structure?
BTW, I deleted the partially rebuilt library via iphoto library manager...
Thanks for any help.Darn! It seems to say MS-DOS (FAT). I thought I had fixed all my HDs to be properly formatted for the Macintosh.
Does this mean I'm SOL?
I could put a screen shot of my disk utility...
Or how about I just copy the entire iphoto library to my new giant-er HD and then reformat the EHD and copy it back ... is that necessary? And if so, how best to move the library. Do I need to use iphoto library manager or just slide the whole thing onto the internal HD?
Thanks a million.... -
CVS keyboard accelerators lost after restart
Hi
I set up accelerator keys for CVS edit (F10) and CVS commit (F11). Whilst JDeveloper is running, these keys work fine and I am able to edit and commit with these shortcut keys.
However, when I restart JDeveloper, the settings are lost and I have to set the keys again - (I have to do this each time I restart JDeveloper).
When I set keys F10 and F11 to other accelerator shortcuts such as make selected or run selected these work fine, even after restarting JDeveloper. The problem only seems to be with the CVS commands.
Do I have to some additional configuration for the CVS accelerators?
I am using JDeveloper 9.0.3.1 and the problem occurs on both Windows XP and SUSE Linux 8.1.
Thanks
UsmanI'm seeing this problem with set accelerators being lost after restart with JDeveloper Preview 10.1.3.0.2.
I set an accelerator to an external tool (Tomcat Startup and Tomcat Shutdown) and the accelerator is gone after I restart JDeveloper.
I apologize if this is a known bug in Preview... I did a cursory search through the forums and only found this one.
Thanks,
Chris -
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export optionsafter upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options -
After selecting one scene from the scene selection menu, the following scenes play automatically, as if it were in "play movie" mode. Is there a way to stop that behavior and have the DVD return to the scene selection menu after playing just the selected scene?
OK
So what You want is a "Play All" button resp. a "Play one Chapter at a time" one.
Then
BAD News - There are Non ! in iDVD
GOOD News - it can in part be faked.
read on
Play all resp. one chapter at a time
Play All Button
1. There are NO - Play All - button in any version of iDVD
2. It can be faked in several ways
• Easiest and most fault proof way is to make a doublet movie containing All and with
Chapters set to match. It will take up x2 space but is easy to understand and produce.
Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
• It's said that one can put all movies into a Photo/SlideShow and this will also
give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
Mike Evangelist1
You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
Summary
a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
b. Using Roxio Toast™ - also an usable way to go
Yours Bengt W -
Back to selection screen after error
Hello ABAPers,
I have a executable program (REPORT) to do some processing (e.g. read a standard table with the parameters and select-options and save the data in a Z table).
When occurs an error (e.g. when sy-subrc <> 0 after select) and a message of type E is showed, the program show the message in a "clean" screen with title SAP. Then, after ENTER or ESC, it leaves to initial screen of SAP (SAP Easy Access).
The message of type E is triggered from a routine (FORM) called from START-OF-SELECTION event. And the program don´t write nothing in list (only return a status message if everithing is ok).
How can I force the program to back to selection screen after some error?
Thanks in advance.
Best regards,
Charles Oliveirahi,
Do the following for your requirement.
in the message give the following
start-of-selection.
Perform <routine>.
Form <routine>.
if <condition>.
message 'xxxx' type 'S' display like 'E'.
exit.
endif.
endform.
This way the control returns to selection screen even after the message is triggered.
Thanks
Sharath -
Select data from undo tablespace?
Hi all,
Can i select data from undo segments in undo tablespace?
Thank you.
Dan.This sort of thing could be considered to be selecting from an undo segment:orcl> select count(*) from emp;
COUNT(*)
14
orcl> delete from emp;
14 rows deleted.
orcl> commit;
Commit complete.
orcl> select * from emp as of timestamp(sysdate - 5/1440);
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-12-80 00:00:00 800 20
7499 ALLEN SALESMAN 7698 20-02-81 00:00:00 1600 300 30
7521 WARD SALESMAN 7698 22-02-81 00:00:00 1250 500 30
7566 JONES MANAGER 7839 02-04-81 00:00:00 2975 20
7654 MARTIN SALESMAN 7698 28-09-81 00:00:00 1250 1400 30
7698 BLAKE MANAGER 7839 01-05-81 00:00:00 2850 30
7782 CLARK MANAGER 7839 09-06-81 00:00:00 2450 10
7788 SCOTT ANALYST 7566 19-04-87 00:00:00 3000 20
7839 KING PRESIDENT 17-11-81 00:00:00 5000 10
7844 TURNER SALESMAN 7698 08-09-81 00:00:00 1500 0 30
7876 ADAMS CLERK 7788 23-05-87 00:00:00 1100 20
7900 JAMES CLERK 7698 03-12-81 00:00:00 950 30
7902 FORD ANALYST 7566 03-12-81 00:00:00 3000 20
7934 MILLER CLERK 7782 23-01-82 00:00:00 1300 10
14 rows selected.
orcl> -
Empty selection options after report run
Hi,
After the execution of my abap report sap returns to the selection options screen in which all the selected values from the run are still mentioned. How can i refresh the selection screen (so no values in the selection options after the report run) ?
this is the code (all parameters as you can see) :
parameters : p_matnr like mara-matnr default ''.
parameters : p_werks like mard-werks default 'XYZ',
p_lgort like mard-lgort default ''.
selection-screen skip 1.
parameters : p_qty like sy-tabix default 1.
selection-screen skip 1.
parameters : p_file like RLGRAP-FILENAME memory id GXD.
with regardshi
i tried for select-options try for parameters
at selection-screen .
if sy-ucomm = 'ONLI'. " Only when execute is pressed
v_low = s_kunnr-low.
v_high = s_kunnr-high . " Hang on to this for select statement
clear s_kunnr[].
clear s_kunnr. " Clear the screen parameter
endif.
for your program
data : matnr like mara-matnr, " variables are taken so that we can have the values for further operations
werks like mard-werks,
lgort like mard-lgort,
qty like sy-tabix,
file like RLGRAP-FILENAME.
at selection-screen.
if sy-ucomm = 'ONLI'. " Only when execute is pressed
matnr = p_matnr.
clear p_matnr.
werks = p_werks.
clear p_werks.
lgort = p_lgort.
clear p_lgort.
qty = p_qty.
clear p_qty.
file = p_file.
clear p_file.
endif.
start-of-selection. " write what ever code you have for the start-of-selection
NOTE "Remove the memory id for p_file otherwise it will not be cleared
regards
prasanth -
User Settings lost after session is released
I am having a problem with the User settings being lost after the user logs off the system.
menu settings, fields displayed in Marketing Documents, displayed User Defined fields and the
sequence of User defined fields get lost after the session ends. This does not happen to all users,
just some users. The users that keep losing their settings keep losing their settings, the ones that do not have a
problem seem never to have a problem.
has anyone else experienced this problem and if so, how has it been resolved?
Thanks in Advance!!!
DanaDana,
You may check these threads first:
change in form settings
Re: Settings don't seem to "stick" after being added from the Form Setttings
Re: 2007A PL42 and Windows Roaming Profiles
Form settings not saving
Thanks,
Gordon -
Nokia Maps subscription info lost after firmware u...
anyone tell me why my maps software has lost the subscription data for navigation - only 10 months used, lost after recent firmware update- dont want to pay again but it keeps asking me to when I want to navigate
Hi wadders
Which phone model on what firmware version are you using?
In Nokia Maps > Options > Extras > My Licenses - what result do you get?
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers? Thanks a lot !!!!
我的书签在电脑突然被断电之后全部丢失了,我该怎么办呢??谢谢啦!!~~~~This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
* http://kb.mozillazine.org/Lost_bookmarks
Maybe you are looking for
-
Formatting phone number: how to get rid of (...)?
I live in Romania, and Contacts incorrectly formats phone numbers of the type xxxx xxx xxx (10 digit, the national standard, out of which the first is zero) into (xxxx) xxx xxx, i.e. inserting brackets before the first and after the 4th digit respect
-
Making Business Place and Section Code compulsory entry in Posting Invoice
Hi How do we make Business Place and Section Code Compulsory while posting Invoices for a vendor Regards Sanil Bhandari
-
How do i make a itunes connect account
When I signed in to Itunes Connect with my apple ID it didn't work. I changed the password and it still didn't work.
-
Hi Friends, Can anyone please tell me what controls header screen in t.code MIRO and how do I see what fields are mendatory or suppressed in it. If you can provide path , it would be helpful. Points to answers. Thanks
-
Highly unsatisfied customer- unable to get callback
I have been a verizon customer for 5 yrs. After my contract was up recently, and after receiving a promotion nearly everyday decided to call and renew contract. BIGGEST MISTAKE OF MY LIFE. After a 3 hr long phone call, the rep was able to offer me a