Trouble building an installer with NI-DAQmx and tasks

I am having trouble getting an installer that includes my tasks for NI-DAQmx. I select the configuration wizard from the hardware tab, it shows my tasks with checkboxes but i cannot 'check' the task I want, it says "the item cannot be checked because it depends on other items whose software has not been installed". The drop down menu for the 'scales' can be shown and checked but that doesn't include the tasks when i try to install the 'package'.

that was the problem... but raises another issue.
My DAQ device NI-USB 6008 was not connected to my "development workstation" but was on the "distribution workstation". When I connected the USB DAQ device to my development workstation I was able to check the checkbox and it was included in the configuration file and when I installed the application on the development workstation, it worked as expected.
Does this mean that any time I make a change to the "Task" i'm going to have to have the DAQ device (the UB 6008) attached to my development workstation for the installer build to work?... that seems cumbersome... and since I'm going to be developing my App to run on 4 different workstations each with it's own USB 6008, am I going to have to configure the appln 4 ways (4 tasks) - 1 for each workstation?

Similar Messages

Installed 8.5 and now I can't build an installer with 8.0

I've been using 8.0 to write some applications. We have the professional development system contract or whatever with NI providing upgrades. Our IT dept came and installed 8.5 on my computer. I used it for a short while, then went back to 8.0. I have not un-installed 8.5. I'm now experencing problems building an installer with 8.0. I get the message box that it is "unable to locate the installer source for NI Labview 8.5 distribution" and a default D drive for the original CDs which I don't have. I do have the original 8.0 CD's and mainly for that reason want to continue to use 8.0. In the build process I am using additional installers for datasocket and visa 4.2. If I uncheck them the install process will complete. Is there someway for me to force my installer builder to use the 8.0 files instead of 8.5? Could I do this by un-installing 8.5? I re-installed 8.0 hoping that would help but it did not. I searched for this problem and found several earlier postings concerning this problem but none specific to this particular issue. thanks for any advice, Mike

Thanks for the input centerbolt. What a pain huh? I'll have to think about if I want to do all that for a while While I have administrative rights on my pc, the IS dept. is so paranoid what people might do I'm uncertain of restrictions that might stop me part way through and then be unable to recover or something. I like LV a lot but not real happy with the build processes for compiling programs and installs. If I copy the LV CDs to my C drive and then do the installation from there rather than the CD drive, will the program installer quick defaulting to the D drive for unfound drivers? Does that make sense? Anyway, thanks again.

Error with "Sync calendar and tasks" - Nokia 6500c

I'm having trouble with "Sync calendar and tasks" - all other sync is fine.
It all worked OK with PC Suite beforehand.
I've auto upgraded to Ovi on last connection.
Can anyone help?
Error message when trying to sync is:
"Not enough space in device
First remove some files from your device and then sync again.
8393f01e"
Phone status:
Device memory - 910MB of 940MB fee
Phone version:
Nokia 6500c
V 09.48
26-01-09
RM-265
Ovi version:
Nokia Ovi Suite 2.0.1.35
Nokia PC Suite 7.1.40.1
Nokia Music 1.3.20722.1
PC Connectivity Solution 9.44.0.3
Connectivity Cable Driver 7.1.22.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.35.0
Nokia Platform 2.5.195
Ovi Desktop Sync Engine 1.0.0.684
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 6.0.2900.5512
- Mozilla Firefox 3.5.5
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 5512)
- Toshiba (Version v4.00.22(D))
Thanks.
Cheers,
Jason.

Hi,
Really **bleep** off with this issue in synchronizing , I move back to my old PC suite that worked fine .
I expect our NOKIA provider to be back on their code and solve this issue.
At least, one mail to me warning me of corrections with this issue and improved performances would not be considered by me as spam but as consideration to users .
Sorry dear developpers but either your specs were uncomplete, at least performance criterias were undefined and you businees acceptance test were unproperly managed. I would not like to be the project manager in charge of ! Just before Christmas, providing such a release will make Santa Klaus quite unhappy top him .
BR

Cannot build Installer with NI-DAQmx Configuration Support 9.6.1

Running labview 2011 SP1 f2
All SW/Device Drivers are up to date. error code -21, see attached for more details.
Things tried:
Updated just about all NI software
repaired Labview, device drivers, OPC and DSC as individuals.
Running out of options, its something specific to my machiene, other developers can build this given the same setup.
Ideas?
Certified LabVIEW Architect
Attachments:
NI Build Error.docx ‏79 KB

-          The following are possible reasons and solutions for this error:
#1. Installer specifications file is corrupted. For example, an old version of an installer specifications file could have been copied into the project.
-Go to Tools>>Advanced>>Mass Compile and mass compile the directory where the error is located. Mass compiling is necessary for VI compatibility with a particular version of LabVIEW. If this does not work then delete the saved installer settings from the project window and create a new one with the same settings.
#2. Additional installer components have been overwritten
-Referring to the knowledge base Why do I get a Missing Distribution Error when trying to build an installer from LV 8.0, an installer build always refers to the original installer source. For example, if you are using the NI-DAQmx driver (with additional component MAX 4.0) and later install Measurement Studio (With additional component MAX 4.1) this will cause an error because the installer is still referring to MAX 4.0. Point the installer to the original content on the driver-cd or the hard drive.
#3. Installing drivers before you installed LabVIEW or Updating your drivers
-The same driver and LabVIEW version, which the VI was written in, must be used to build a functioning installer. If an upgrade has occurred then make sure to include updated versions of the run time engine and driver. The driver and LabVIEW versions can be upgraded , in which case you can include the updated version of the driver and run time engine when you try to include additional installers. Make sure that the driver is properly installed for the specified version of LabVIEW in order to upgrade code for new drivers and software. Make a back up of your current project for reference. Open the project in the specified version of LabVIEW and go to Tools>>Advanced>>Mass Compile and mass compile your code

Building an Installer with the product version major at 0

Hi Everyone,
I'm currently working on a prototype and I should build an installer for the prototype validation.
The matter is that the prototype version start at 0, and I can't find a way to set in the product version major field at 0.
Setting the major field at 0 is possible while building an executable, but not for an installer.
My LabVIEW version is 12.0
Thanks...

Marc-junior wrote:
It seems to me that it is the wanted behaviour application builder here. From the help page, you can read the following "You must increment the version number if you want to create upgrade versions of the installer that are capable of overwriting previous installers."
That does not explain anything. We should be able to make the first ever version 0.0.0, that can later be upgraded to e.g. 0.0.1.
According to microsoft:
The format of the string is as follows:
major.minor.build
The first field is the major version and has a maximum value of 255. The second field is the minor version and has a maximum value of 255. The third field is called the build version or the update version and has a maximum value of 65,535.
So, the max is 255.255.65535. There is no minimum given, so 0 should probably be allowed. I suspect that the input field in the build specification has an incorrect range setting.
LabVIEW Champion . Do more with less code and in less time .

Oracle10gRAC installation with ASM, SGeRAC and Oracle Clusterware on Ita64

Hello!
Does anyone have an installation guide for the configuration: Oracle10gRAC with ASM, SGeRAC and Oracle Clusterware on Itanium?
Thanks in advance, Mara

859875 wrote:
Thanks Fiedi. Thanks a lot for your response.
Last month I did RAC installation where I need format raw devices using below commands :
clean all
create part ext
create part log
Is it not required for standalone DB installation with ASM ?
Basically preparing disk for ASM on RAC or non RAC is the same
>
>
I am able to create 4 logical raw devices (175GB) each. 2 for Data and 2 for DB flash. However I am not able to clean those raw devices with "clean all" command.
Can you help me ?
what error did you get?. Try delete the logical partition and recreate it

CRM 5.0 Installation with MS-SQL and windows 2003 server

Hi,
I have to install CRM 5.0 with MS-SQL 2005 and ECC 6.0 with Oracle 10g and integrate with QAS(Third party tool).
My question are:
1.Can we install all there application on single server.
2. what s/w units we have to chose generally and what are standard(ie. EP,TREX etc.....)
3.Can we install the s/w units later after CRM core installation.
I am a BASIS Consulatnt and first time installing the CRM.
Regards
Alok

Hi Alok,
1. You can install all the applications in one box, But it is not advisable as the performance of all the applications can degrade.
2. Software units like EP, Trex are installed based on the business needs, requirements...
3. You can proceed initially with the installation of CRM Core components and later you can install other components/ software units.
Thanks
Ashok. R

Preview installation with ABAP, JAVA and EP

Hello all
I repost this topic to mark with the "question star".
I been inactive in the sneak preview area for a few month and I see here in SDN that a lot of new software is ready for download.
I have also read some of the postings from this forum, but I'm not sure what I need to have an installation with both ABAP, JAVA en EP.
Can anyone verify that I need:
1 server for the WAS 6.20 for ABAP
1 server for SAP Enterprise Portal 6.0 SP4 NetWeaver Stack 2 Developer Workplace Sneak Preview for JAVA and EP.
And that I can join the 2 systems via rfc or connectors.
Is it also possible to get a Sneak Preview to Web Dynpro (or is it included in the above) ?
Best regards
Thomas Madsen Nielsen

The combined ABAP and JAVA stack Web AS doesn't support installation of EP on top.
If you want the features of both ABAP and JAVA stack in combination with EP then you will need two WebAS instances, one of those MUST BE Java ONLY!
I suppose you could manually club things together with SDM, but the installation program (SAPinst) in its current form is pretty specific in its checks for a JAVA only Web AS before letting you proceed with EP install.
I have not done a thorough check of the details on why you cannot run EP with Athe ABAP stack, it hasn't been worth the effort of trying....
Nick

Installation with multiple as and one DB (no cluster)

Hi, I'm trying to setup a production environment with three Jboss AS non-clustered and one MSSQL database. I've made the installation on each AS and for each AS I've executed all the steps of the Configuration Manager.
Now I have some problems about the three AS line up; when I modify an user password on one AS the other don't see this modification. Moreover, some common features works such as the policy definition; for example, when I create a policy on the first AS the others can see this policy.
Can you help me?
Thanks
Fabio

Multiple, non-clustered LiveCycle instances against a single database is neither tested, nor supported. For each instance, you'd need a separate database (with multiple sets of tables, views and sequences). All changes have to be repeated for every instance you have.
This technical whitepaper from Adobe will provide more details:
http://www.adobe.com/devnet/livecycle/pdfs/lc_platchoice_wp_ue.pdf
What you are attempting is a deployment architecture the author of this whitepaper calls "Server Load Balancing" (see page 11).
You might be better off clustering the three instances.

Trouble synching Photo Album with 1600+ photos and videos

I have a very big album with over 1600 pics and videos. At some point after 1200 or so, I started getting error messages when trying to synch my photos to my computer. I am terrified to loose my pictures and want them on my phone at all times (they represent a video journal of my now year old twins since they were born). Does anyone have any idea of how I can continue to synch them with my computer without having to erase them from my phone?
Thank you!

Photos/videos in your iPhone's Camera Roll should be imported by your computer as with any other digital camera. This is an import process, not a sync process.
With every other digital camera I've used and imported photos and/or video from, I've always deleted the photos and/or video from the digital camera after the import process is complete.
After doing the same with your iPhone, you can transfer selected photos and video back to your iPhone via the iTunes sync/transfer process - creating separate albums by month for example for the 1600 photos and videos. Keeping your iPhone's Camera Roll to a minimum will speed up your iPhone's backup process - which is updated by iTunes as the first step during the sync process.
With iPhoto on my Mac when importing photos from my iPhone or from any digital camera, Events are created automatically based on the date the photos were taken. An Event is created for all photos captured on a particular day with an option to split a single Event into multiple Events. I can also create albums for select photos with an option to transfer selected iPhoto albums and/or Events to my iPhone keeping photos organized by Event and/or by Album as I prefer on my computer which is also reflected with the Events and/or Albums I've selected to be transferred to my iPhone.

N86 no longer syncs with Outlook Calendar and Task

I have been having much troubles with syncing my N86 (recently updated to 30.009 firmware) to my Outlook 2003 with Ovi Suite 2.1.1.1.
At first, the Contacts kept duplicating themselves. I have about 1000 contacts in my Outlook, but Ovi Suite (and my N86 device) ends up sometimes with 1800 contacts -- of which 800 are duplicates. This is very annoying and time consuming to clean up of course. I have discovered that the problem is somehow linked to Ovi.com. I have since turned off syncing to Ovi.com and only keep my N86 device in sync with Outlook and Ovi Suite. But that wasn't before I had to basically delete all my contacts from the N86 device and from Ovi Suite, followed by a sync to Outlook.
Around this same time, I have noticed that my N86 device was missing appointments that I had entered into Outlook 2003. I discovered that the N86 device no longer syncs to Outlook through Ovi Suite. I keep getting the error message "Sync Canceled -- Could not sync calendar items and tasks. Plug the USB cable into your device again or connect via Bluetooth. Then sync again." I did reconnect my N86 device but the same error message shows each time. Basically, Ovi Suite has stopped syncing Calendar items with my N86 device now.
Can anyone suggest what might have gone wrong? Has anyone else experienced this problem? What can I do to get my calendar items back into my device?
- Kin

Hi Tickles,
Could you be more specific about your issue.
Which operating system do u use?
Are you trying to connect thru cable or thru Bluetooth?
Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
Regards
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

Problem with ADF security and task flow calls

Hi.
I am using JDeveloper 11.1.2.0.0.
I encountered a problem when tried to apply ADF security to my application.
The way to reproduce the problem:
1. Create new Fusion Web Application;
2. Import Business Components from Tables from any existing schema and add at least one table to the ApplicationModule.
3. Create "welcome page" (for instance, welcome.jsf). Add a button with fixed action outcome "test".
4. Create test page, for instance, test.jsf. Drag and drop any view object from Data Controls onto the page and create a form with navigation controls. Add a button with fixed action outcome "return".
5. Create bounded task flow, name it "test", drag and drop our test page on it - the page will be the default activity. Add a task flow return activity. Add a control flow case from the default view activity to the return activity, set From Outcome property to "return". So our return button should cause the task flow to exit.
6. Open adfc-config.xml in diagram mode and place our welcome page on it. Then drag and drop the test task flow to create a task flow call activity. Add a control flow case from welcome page to task flow call activity, set the From Outcome property to "test". So our test button should call the test task flow.
7. Configure application to run the unbounded task flow starting with Welcome view activity.
At this point all works as expected: when application runs, the welcome page is displayed with test button. Pressing the test button results in displaying the test page, return button leads back to the welcome page.
Now let's configure ADF Security.
Run the ADF Security configuration wizard, choose ADF Authentication and Authorization.
On the second page select Form-Based Authentication, check the Generate Default Pages flag.
On the third page choose No Automatic Grants.
On the next page keep the Redirect Upon Successful Authentication unchecked. Press Finish.
Open jazn-data.xml to configure roles, users and resource grants:
1. Create application role test-role.
2. Grant the test-role privileges to view the test task flow.
3. Create user and grant him the test-role.
Now we have the public available welcome page and the test page with restricted access.
When application runs, the welcome page is displayed as expected. Pressing the test button redirect us to auto-generated login page. After successful authorization the test page is displayed. But nothing happens if we click now the return button for the first time. When we click the return button once more, the application crushes with Error-500 and message "Target Unreachable, identifier 'bindings' resolved to null". The exact error trace depends on UI control bindings, but looks like this:
javax.el.PropertyNotFoundException: //C:/Users/DUDKIN/AppData/Roaming/JDeveloper/system11.1.2.0.38.60.17/o.j2ee/drs/Test1/ViewControllerWebApp.war/test.jsf @10,120 value="#{bindings.Id.inputValue}": Target Unreachable, identifier 'bindings' resolved to null
     at com.sun.faces.facelets.el.TagValueExpression.isReadOnly(TagValueExpression.java:122)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:476)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:390)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.wasSubmitted(EditableValueRenderer.java:345)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.decodeInternal(EditableValueRenderer.java:116)
     at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.decodeInternal(LabeledInputRenderer.java:56)
     at oracle.adf.view.rich.render.RichRenderer.decode(RichRenderer.java:342)
     at org.apache.myfaces.trinidad.render.CoreRenderer.decode(CoreRenderer.java:274)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.__rendererDecode(UIXComponentBase.java:1324)
(the rest of lines skipped).
Any suggestions?
Edited by: user13307311 on Apr 16, 2013 11:39 PM

@Lovin_JV_941794
The welcome page is public available since it does not have appropriate PageDef file.
Login page comes not from the welcome page, it comes after attempt to access the test page. So after the login succeeded the test page appears, because redirect to welcome page after successful login is not configured. I do not need to return the welcome page at this moment, I need to go to the test page.
It seems the task flow call stack to be destroyed after redirect to login page.
Edited by: user13307311 on Apr 17, 2013 12:45 AM

How we will create relationship with org unit and task catalog

HI Experts
How we can create relationship between Org unit and Task Catalog in Organisation management once we grouped all the tasks in one group.
For Example we have one org unit under that we have 3 depts those will consider as org units only.under 3 depts we have professor,Lecturer,Reader as jobs and positions also.If we create Professor tasks in task catalog which all the tasks will be assigned to positions as well.
If it is Org unit and Task catalog how we can create relationship.
Thanks
Rajji

Hi,
Please try.
DATA: lt_hrp1001 TYPE STANDARD TABLE OF P1001.
DATA: lw_hrp1001        TYPE p1001.
lw_hrp1001-mandt = sy-mandt.
lw_hrp1001-plvar = parent_pos-plvar.
lw_hrp1001-otype = parent_pos-otype.
lw_hrp1001-objid = other_pos.
lw_hrp1001-istat = parent_pos-istat.
lw_hrp1001-begda = sy-datum.
lw_hrp1001-endda = lc_endda.
lw_hrp1001-infty = '1001'.
lw_hrp1001-aedtm = sy-datum.
lw_hrp1001-uname = sy-uname.
lw_hrp1001-rsign = codes.
lw_hrp1001-relat = relats.
lw_hrp1001-sclas = lc_sclas.
lw_hrp1001-sobid = cord_pos.
append lw_hrp1001 to lt_hrp1001.
      CALL FUNCTION 'RH_INSERT_INFTY'
        EXPORTING
          fcode               = 'INSE'
          vtask               = 'S'
          commit_flg          = 'X'
        TABLES
          innnn               = lt_hrp1001
        EXCEPTIONS
          no_authorization    = 1
          error_during_insert = 2
          repid_form_initial = 3
          corr_exit           = 4
          begda_greater_endda = 5
          OTHERS              = 6.
Hope this helps.
regards,
Xiang Li

Trouble building klibc package with Zen kernel

Hello,
I'm using a kernel from the latest Zen-Sources Git (in other words, a modified 2.6.29-rc). I'm trying to build klibc, but having trouble. I'm using the klibc PKGBUILD and files with only a slight modification to _kver to point to my kernel under /lib/modules.
The build process goes until:
KLIBCLD usr/utils/shared/sync
KLIBCLD usr/utils/shared/dmesg
INSTALL headers + man pages to /root/klibc/pkg/usr/lib/klibc
cp: cannot stat 'linux//include/asm/./asm': No such file or directory
make[1]: *** [header] Error 1
make: *** [install] Error 2
==> ERROR: Build Failed.
Aborting...
The problem is in /src/klibc-1.5.15/scripts/Kbuild.install, near the end (under the big comment block). I won't post the code block because it's massive and I don't have copy+paste because of something unrelated, but you can get it from using ABS.
I don't know if the problem is because of 2.6.29, zen, or something I'm doing. I tried disabling a few of the patches we used, and I looked at the patches in the (sort-of-outdated) klibc-zen package in the AUR, but none of those seem to be related at all.
Thanks for any help!

create symlink asm to asm-x86
this is on 32-bit system,

How do I use a counter for time measurement with NI-DAQmx and C++?

Hi,
I need my C++ program to read time (number of elapsed ticks) using the counter on PCI-6229. I had this written and working for the non-MX driver, and now I need to re-write it for NI-DAQmx.
Here are the steps that I want to accomplish:
1. Route the 80MHz timebase to the input of "Dev1/ctr0"
2. Start the counter and let it count the ticks.
3. After a while, read the number of ticks from the counter.
Here is how I am trying to do it now (without success):
           DAQmxCreateTask ( "" , &taskHandle ) ;
           DAQmxCreateCICountEdgesChan ( taskHandle , "Dev1/ctr0" , "" , DAQmx_Val_Rising, 0 , DAQmx_Val_CountUp ) ;
           DAQmxConnectTerms ( "/Dev1/80MHzTimebase" , "/Dev1/Ctr0Source" , DAQmx_Val_DoNotInvertPolarity ) ;
           DAQmxStartTask ( taskHandle ) ;
           then DAQmxReadCounterScalarU32 ( taskHandle , 0.25 , &curCount , NULL ) ;
           and DAQmxClearTask ( taskHandle ) ;
No errors are generated, but I do not see the tick count being incremented when I repeatedly read the counter.
Advice will be greatly appreciated!!

Hi Peter,
Welcome to the forums!   I just want to make sure I understand what you are trying to do. You would like to count the rising edges of the 80 MHz clock using DAQmx in C++. In order to route the timebase to the counter, you need to use the signal name (PFI8) instead of the counter (Ctr0Source) for the counter source input. This name is found in Measurement Automation Explorer (MAX) by right-clicking on the device and choosing “Device Pinouts.” This will physically put the 80 MHz clock on the PFI8 line, so make sure you reset the device or disconnect the terminals after you are done.
That being said, may I ask what you are trying to do by reading the number of elapsed ticks? If you are trying to monitor a hardware timed pulse, it would be better to count the frequency or period of that pulse. This would provide better accuracy, because you are not relying on how fast DAQmx Read can poll the hardware. If you are simply looking for a software based timer, I would recommend taking a look at this MSDN forum post.
Using the GetTickCount function instead will free up your counter and provide comparable accuracy to counting the edges of the timebase.
I hope that helps you out, let me know if you have any further questions about this. Good luck with your project.
Rod T.

Trouble building an installer with NI-DAQmx and tasks

Similar Messages

Maybe you are looking for