Trouble getting virtual NICs to appear in VM
Hi all. We have the latest release of HyperV running on fully patched Windows 2008 host machine. We have 3 physical dual port NICs in the machine and we are having trouble creating virtual networks and having them show inside a guest VM.
Our guest VM is running Windows 2003 Web, SP2. No network adapters show up under Control Panel -> network connections
In device manager I notice a yellow exclamation under Other Devices. The details for this are as follows:
Unknown Device - Location: on Intel 82371AB/EB PCI to ISA bridge (ISA)
The drivers for this device are not installed.
Details: Value - ACPI\VMBUS\4&4B018EB&0
Here are the steps we took to create the virtual network:
1) Open Virtual Network Manager
2) Click Add on "External" virtual network
3) Select Intel Pro/1000 PT Dual Port Server Adapter (unused on host machine, but cable is plugged in) - External
4) Click OK to create virtual network
5) Go to Settings of VM and click Network Adapter
6) Select the virtual network we just created under Network: in Settings
7) Configure IP address etc on new VIRTUAL nic created on host machine. I have confirmed Hyper-V removed all checkboxes under properties of the physical NIC minus Microsoft Virtual Network Switch Protocol
Does anyone know what I am doing wrong? Is there some sort of driver/patch I am missing? Any help would be much appreciated!
I should have stated;
Windows Server 2003 x86 SE built on VS 2005 R2 sp1, transferred to Server 2008 with hyper V installed, upgraded to SP2. Integration Services setup disk has been run. Mouse control is in and running. Still no NIC drivers.
System built on 2008 Vhost with SE sp0 and upgraded works. I hadn't installed the integration disk. My bad.
So is there nic drivers available or not? The biggest business requirement for virtualization is to save on all the testbed workstations and servers. These run things like Windows 2000 server and workstation, Windows XP, server 2003 sp0. Various testing levels for compatibility with clients. Without this driver natively there seems to be no way forward for the company infrastructure.
meep.
Similar Messages
-
Trouble getting downloaded tracks to appear in playlist.
Just downloaded some music. Was able to get some of it moved into a playlist. Downloaded some more, and am unable to get tracks to move into the playlist. I've rebooted the computer twice. Still won't. I've tried right-clicking and selecting add to playlist - seems to work but then is't there. Also tried to select the track and drag it to the playlist name in the left menu, but it won't allow that. This happened some weeks back, and it eventually worked after a couple days. Any idea?
I should have stated;
Windows Server 2003 x86 SE built on VS 2005 R2 sp1, transferred to Server 2008 with hyper V installed, upgraded to SP2. Integration Services setup disk has been run. Mouse control is in and running. Still no NIC drivers.
System built on 2008 Vhost with SE sp0 and upgraded works. I hadn't installed the integration disk. My bad.
So is there nic drivers available or not? The biggest business requirement for virtualization is to save on all the testbed workstations and servers. These run things like Windows 2000 server and workstation, Windows XP, server 2003 sp0. Various testing levels for compatibility with clients. Without this driver natively there seems to be no way forward for the company infrastructure.
meep. -
Having trouble getting objects on panel
i am just attempting to build a simple gui frame and am having some trouble getting my labels to appear. here is what I have for the panel that the labels and buttons will be on. everything shows up no problem except clearButton and welcome2. Any suggestions would be greatly appreciated...thanks in advance
class CountClicks2Panel extends JPanel
constructs a count-clicks-1 panel instance
public CountClicks2Panel()
// button has not been clicked yet
this.numClicks = 0;
// create the labels and buttons for this panel
JLabel welcome = new JLabel("Button-Click Counter");
welcome.setForeground(Color.BLUE);
JLabel welcome2 = new JLabel("Jared Letendre");
welcome2.setForeground(Color.RED);
JButton clickMe = new JButton("Click Me");
clickMe.setForeground(Color.BLUE);
clickMe.setBackground(Color.RED);
JButton clearButton = new JButton("Clear Count");
clearButton.setForeground(Color.BLUE);
clearButton.setBackground(Color.RED);
showNumClicks = new JLabel("# of clicks: " +
this.numClicks);
// add labels and button to this panel
this.add(welcome);
this.add(clickMe);
this.add(showNumClicks);
this.add(welcome2);
this.add(clearButton);
// create button action (so clicks will be counted),
// and associate that action with clickMe button
CountClicks2Action countAction = new CountClicks2Action();
CountClicks2Action clearAction = new CountClicks2Action();
clearButton.addActionListener(clearAction);
clickMe.addActionListener(countAction);
} // end CountClicks2PanelSorry about that...i put it in code blocks originally but it didnt show when i previewed it...anyway here is the complete code. thanks for helping out
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
A GUI application with a button for which the number
of clicks is kept track of and displayed
@author Sharon Tuttle
@version 09-10-07
public class CountClicks2Test
creates a CountClicks1 frame
@param args not used here
public static void main(String args[])
CountClicks2Frame mainFrame = new CountClicks2Frame();
mainFrame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
mainFrame.setVisible(true);
A frame with a panel containing two labels and a button
class CountClicks2Frame extends JFrame
constructs a count-clicks-1 frame instance
public CountClicks2Frame()
this.setTitle("Button-click Counter");
this.setSize(this.DEFAULT_WIDTH, this.DEFAULT_HEIGHT);
// add count-clicks-1 panel to frame
CountClicks1Panel panel = new CountClicks1Panel();
this.add(panel);
// data fields
private final static int DEFAULT_WIDTH = 150;
private final static int DEFAULT_HEIGHT = 200;
A panel with two labels and a button, that displays how many times
the button has been clicked
class CountClicks2Panel extends JPanel
constructs a count-clicks-1 panel instance
public CountClicks2Panel()
// button has not been clicked yet
this.numClicks = 0;
// create the labels and buttons for this panel
JLabel welcome = new JLabel("Button-Click Counter");
welcome.setForeground(Color.BLUE);
JLabel welcome2 = new JLabel("Jared Letendre");
welcome2.setForeground(Color.RED);
JButton clickMe = new JButton("Click Me");
clickMe.setForeground(Color.BLUE);
clickMe.setBackground(Color.RED);
JButton clearButton = new JButton("Clear Count");
clearButton.setForeground(Color.BLUE);
clearButton.setBackground(Color.RED);
showNumClicks = new JLabel("# of clicks: " +
this.numClicks);
// add labels and button to this panel
this.add(welcome);
this.add(clickMe);
this.add(showNumClicks);
this.add(welcome2);
this.add(clearButton);
// create button action (so clicks will be counted),
// and associate that action with clickMe button
CountClicks2Action countAction = new CountClicks2Action();
CountClicks2Action clearAction = new CountClicks2Action();
clearButton.addActionListener(clearAction);
clickMe.addActionListener(countAction);
} // end CountClicks2Panel constructor
An action listener that counts the number of times the
clickMe button has been clicked
private class CountClicks2Action implements ActionListener
// default constructor will suffice, in this case
increases and displays the number of clicks of this
button
public void actionPerformed(ActionEvent event)
CountClicks2Panel.this.numClicks++;
CountClicks2Panel.this.showNumClicks.setText(
"# of clicks: "
+ CountClicks2Panel.this.numClicks);
public void actionPerformed2(ActionEvent event2)
CountClicks2Panel.this.numClicks = 0;
CountClicks2Panel.this.showNumClicks.setText(
"# of clicks: "
+ CountClicks2Panel.this.numClicks);
// data fields for CountClicks1Panel
private int numClicks;
private JLabel showNumClicks;
} // end of class CountClicks1Panel -
I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?
I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/ -
I am having trouble getting rid of delay between slides. I am Revolving from one to the other and it comes up blank in between slides.
@vincepay
Here is a link to the drivers for the HP Colour LaserJet 3600 windows 7 drivers:
HP Color LaserJet 3600 Series Printers World Wide Printing System - 64 bit driver for windows 7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution -
Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps. -
I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am having trouble.getting music that I have purchased in the past to transfer to my phone after I did recent update on the phone. I can see the music, it is in a lighter font and appears to still be there but will not play. When placed on shuffle it will skip right over this music. I have already paid for this music and have been able to play it at one time but that was before the update. Why can I not listen to this music anymore?
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
When setting up converged network in VMM cluster and live migration virtual nics not working
Hello Everyone,
I am having issues setting up converged network in VMM. I have been working with MS engineers to no avail. I am very surprised with the expertise of the MS engineers. They had no idea what a converged network even was. I had way more
experience then these guys and they said there was no escalation track so I am posting here in hopes of getting some assistance.
Everyone including our consultants says my setup is correct.
What I want to do:
I have servers with 5 nics and want to use 3 of the nics for a team and then configure cluster, live migration and host management as virtual network adapters. I have created all my logical networks, port profile with the uplink defined as team and
networks selected. Created logical switch and associated portprofle. When I deploy logical switch and create virtual network adapters the logical switch works for VMs and my management nic works as well. Problem is that the cluster and live
migration virtual nics do not work. The correct Vlans get pulled in for the corresponding networks and If I run get-vmnetworkadaptervlan it shows cluster and live migration in vlans 14 and 15 which is correct. However nics do not work at all.
I finally decided to do this via the host in powershell and everything works fine which means this is definitely an issue with VMM. I then imported host into VMM again but now I cannot use any of the objects I created and VMM and have to use standard
switch.
I am really losing faith in VMM fast.
Hosts are 2012 R2 and VMM is 2012 R2 all fresh builds with latest drivers
ThanksHave you checked our whitepaper http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a for how to configure this through VMM?
Are you using static IP address assignment for those vNICs?
Are you sure your are teaming the correct physical adapters where the VLANs are trunked through the connected ports?
Note; if you create the teaming configuration outside of VMM, and then import the hosts to VMM, then VMM will not recognize the configuration.
The details should be all in this whitepaper.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com ) -
I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below. Any suggestions would help.
Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul -
Getting Undeleted Topic to Appear in Client Working Folders
I'm testing out the Undo Deletion function in RoboSource
Control and am having a little trouble getting an
undeleted/restored topic to appear in RoboHelp HTML. (This is
RoboHelp X5.) After I undelete a topic, I can see it in the
database using RoboSource Control and in the relevant project's
folders on my hard drive using Windows Explorer. However, when I
open the relevant project in RoboHelp HTML, the topic is nowhere to
be found. I tried doing a Get Latest Version and Check Out All, but
neither of these caused the undeleted/restored topic to be visible
from RoboHelp HTML. The only workaround I' ve been able to use is
to import the file back into the project. (I haven't spent any time
to determine whether this will break or courrupt anything in the
project.)
Is there any way to get an undeleted/restored topic to
automatically appear in a project for all client users? Note: By
automatic, I am including "Get Latest Version" or "Check Out All"
as you clearly need to do something to copy the file over to each
client's working folders. We'll have as many as 4 client users and
I need to ensure they'll all be able to work from an accurate copy
of each help project.
Thanks!So, to make sure I understand, every time I undelete/restore
a topic, I'll need to alert all 4 client users and then each of
them will need to open the project on their machine and import the
undeleted/restored topic?
Also, I'm currently running all these tests with the Client
and Server installations on my machine. When we deploy this, we'll
have a dedicated server and 4 client users. Now, when I undelete a
topic, I notice that this automatically restores the .htm file to
the relevant working folder - however, it's the SERVER'S working
folders. Thefore, it seems like:
the client users will have to import
the .htm file by browsing over our network to the Server's working
folders; OR
the administrator could, using
RoboSource Control, check the file out and then back in to each
client's relevant working folders (which would place a copy of the
file on their machines and then they could import it into the
project from there); OR
the administrator could just e-mail
them a copy of the file and they could import it from wherever on
their machine (they'd just have to be sure they import it into the
correct project folder).
Is any of this accurate?
Thanks! -
i have an iMac and iPhone 4s i also have ringtones as an app i am also an match user with the cloud how can i get a ringtone to appear in my library to use on my phone
Oh nice, there's a PassKeeper application for the iPhone and iPad. Simply install it and it should talk you through steps, otherwise their website is probably a great place to check.
http://itunes.apple.com/us/app/passkeeper/id405021740?mt=8
I really like the application 1Password, and it works across all the products, Mac, PC, iPad, iPhone. -
hi all
im having trouble getting my laptop to connect to my mac using migration assistant. my mac has a code on the screen but my laptop doesnt respond and just says it waitng for my mac to respond.
any idea? pleaseHi Christina, belated welcome to Apple Discussions if nobody said it already.
I've had some experiences with these new flash memory recording camcorders, and I'll give you a quick rundown of what I've learned. Many of them (JVC, Panasonic, etc.) tend to record in a .MOD file format, which is non-standard, proprietary, and unrecognizable by most software. I thought Canon was usually a little more standards-compliant, but it appears they also use this .MOD format in your specific camera model. There are likely a couple ways we can get around this though!
In order to play the files, you will likely need to change their file format (.MOD) to .AVI manually. You'll have to locate the files on your Mac, and then manually change the file names so that the file extension (after the period) is .AVI
At that point, a video player application such as http://www.videolan.org/vlc/download-macosx.html>VLC should play the files fine!
You should be able to transfer new video files from the camera to the Macbook Pro with no problems as well. Just plug in the camera to the computer via USB, and also make sure the camera is plugged in to charge. Once it's plugged in, open iMovie (came with the MBP, in the Applications folder) and the MBP should take care of the rest.
Let me know if you have any success with any of this!
FYI, the thread that I got some of the above information from is here:
http://forums.macrumors.com/showthread.php?t=478326
--Travis -
I am trying to edit a certificate I created last year but I just keep getting a blue bar appear at the top??
Hi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry -
I am having trouble getting my emails on my mac in the last 2 weeks after being away
i am having trouble getting my emails on my mac only and getting the following message - The MobileMe IMAP server “mail.me.com” rejected the password for user . i have used my password on ipad/iphone and me.com website and all is fine .
Refer to these articles:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
Time out errors when trying to download ios5
I am trying to download the latest version for my iPad but keep getting time out errors and the download fails. My internet connection is still there and hasn't dropped off. Not sure why the download won't 'finish'. Thanks for any help.
-
Importing Word documents into Robohelp 8: topic content is in a text box
Hi I think I am doing standard stuff, but I have never used the import from Word function in RoboHelp before... I used file > import to import a Word document, paginating on heading1 and heading2. All is fine, except that all the text of every topic
-
Upgrading from 10.3 to Tiger 10.4.6
I'm trying to install 10.4.6 on my iBook G4. When I put in INstall Disc 1 I'm getting a long message the top & tail of are:- "No debugger configured............Darwin Kernel...panic. We are hanging here...". It effectively freezes the machine and I'v
-
HT204088 How do you know your history
Hey I wanted to know what I ordered ?
-
hi All, We developed an application which displays users and groups in an active directory. We are using System.DirectoryServices namespace to search Active directory. Our client is using OID as user database. we want to access OID from our C# code.