Trouble in file transfers...

Hi everyone...
I wanted to transfer my files from my PC to my new MacBook, using what Apple considers "the easiest way to transfer files to your new computer", Ethernet direct-connection... but I haven't been able to transfer anything after about an hour of struggling. I think generally Apple's support articles are pretty good, but the articles that try to explain how to do this type of migration lack a lot of details.
http://www.apple.com/macosx/switch/howto/network.html
I do the physical connection from the PC to the MacBook (both have a built-in Ethernet Port, but I think the PC doesn't support Gigabit Ethernet). Nothing seems to happen (I do have "Enable Simple File Sharing" checked in my PC), and I can't access my PC files or folders in the Network Browser in Tiger.
So I tried to see if Mac Help could assist me. I found I could use this alternative method to try to connect:
Type the network address for the computer in the Server Address text box using one of these formats:
smb://DNSname/sharename
smb://IPaddress/sharename
OK, and how am I supposed to know the DNSname, Sharename or IP Address of my PC (I'm assuming it's a different one than the Internet IP Address)?
If I right-click My Computer and then click the Computer Name tab, I can see Computer's Full Name and Workgroup. I've tried to use those names to connect via the Server Address text box in the MacBook, but it gives me Error -36 (it isn't able to connect) every time.
Please, I'd greatly appreciate it if you could help me out...
Thank you!

On the Windows PC make sure your hard drive is being shared. Right- click on the hard drive on the windows pc. when the menu pops up click on sharing and security. then check the box that says "share this folder on the network". Then after you have shared the hard drive on the windows pc connect the two of them and set up the network as described in the article. Then, on your macbook double click on the hard drive and then click on net work and you should be able to find your computer there. I really hope this helps a little bit. Sorry if it seems like i repeated the article.

Similar Messages

Migration Assistant - Files Transferred, but no User Account

I used Migration Assistant to migrate a User account from an early 2009 Macbook Pro to a brand new Macbook Pro. The files transferred (they appear in Macintosh HD / Users), but there is no User account showing in System Preferences or at Login. The permissions are blocking me from accessing the files. I can change them one by one, but, naturally, I'd rather not. I'd love it if there were just some way for me to force the OS to recognize the User so that I can delete the Temp user and work from my original User (I tried to Migrate from the initial setup screen, but it wouldn't find my backup volume).
Some background--beginning a few months ago, I was having some technical problems, and on the advice of an apple-certified tech had attempted to create a new user account. It appeared to fix the problem, so I began manually migrating files, but slowly, so that if it was a software issue, I would be able to isolate the problem software. A month in and after only half of the files were transferred, the tech problem reappeared, so I wound up with half of my files in one user account, half in another. I went ahead and migrated the other half of the files, but wound up with serious permissions issues all over the drive (mainly in photos, music). That is the backup that I am migrating from onto my new replacement Macbook Pro. I don't know if it's the permissions problems that are mucking up the migrate, or what. I have several older backups (from a prior, prior Mac) with no permissions problems, but that's a last resort, as I'd rather avoid the headache of figuring out what files I've updated since those year-old or more backups.
Also, I've been running MA from a Time Capsule using an Ethernet connection. I bought a USB to USB cable, but the comp won't find the TC unless it's connected via network. Any better, faster connections? I use the machine for work, and I'd rather spend as little time migrating as possible.
Thanks in advance, folks.

Sorry for the confusion. My first Mac was a PowerBook--we'll call it "PowerBook." Then I had a 2007 MBP--we'll call it First MBP. PowerBook was migrated to First MBP with no problems except some unreliable Airport at times. I did an Erase & Install and transferred data folder-by-folder from PowerBook to First MBP, as I had read somewhere that Airport settings migrated from PowerBook might cause troubles when put on an Intel machine. (Some minor problems persisted, but those are most likely irrelevant here). Then, I bought a new MBP at the beginning of 2009 when Apple came out with the new design. We'll call that Defective MBP. I just received a replacement MBP, call it "Replacement MBP."
I bought Defective MBP and migrated First MBP to it using Migration Assistant. Defective MBP began having technical problems--it froze up, it said I had no Airport card installed, yet it passed all hardware tests. So I took it to Apple, who replaced the Airport card.
I then began seeing a third-party certified repair person to avoid making appointments. She was the one who advised me to create a new user account, because her tests were suggesting a software issue. I wasn't given detailed instructions on how to treat the temp user account. So, yes, I moved all files from "clwaltrip" (the original user account) to the corresponding folder in "catherine," what should have been the diagnostic temp account. By "corresponding folder," I mean that I moved the contents of Users/clwaltrip/Music to Users/catherine/Music, and so on--like a manual rebuild. I manually reset permissions on each of these folders to allow "catherine" Read & Write access, instructed Finder to Apply to Enclosed Items, and was still getting blocked by permissions all over the place. I eventually made sure that clwaltrip was empty of any important files and deleted the clwaltrip user account. I (very unwisely) attempted to set the permissions on Macintosh HD for "catherine" to "Read & Write". That, of course, required me to go back and repair permissions for days. (Yes, I am duly sheepish). (BTW, Defective MBP was sent in for service twice more during this period, the Airport card was replaced again, a cable was remounted, or whatever they did--nothing worked.) It was only a couple of days after the Macintosh HD permissions repair fiasco that I requested and was approved for a replacement (further issues were indicating a logic board fail, perhaps--drag and drop stopped working, etc). I backed up the single user account, catherine, from the Defective MBP onto the TC via Ethernet (likely with some remaining permissions issues not allowing "catherine" to access "clwaltrip"'s files even though clwaltrip no longer existed).
I received the Replacement MBP and attempted to connect to the TC during initial setup using Ethernet. No connection could be made--it would not even time out after a few hours of reading the time machine backup. I forced restart and tried again. It still would not connect to the TC backup on initial setup. So I forced restart (held down power) skipped that step in setup, allowed it to create a user account (named "clwaltrip" again), and ran Migration Assistant from the Utilities folder (That was when I plugged in the USB, but after no response, I unhooked it and moved exclusively to Ethernet connection to run Migration Assistant--Airport was off). From the TC backups, I selected the backup volume "catherine" mentioned above. No new user account was created, but the user FOLDER for "catherine" is there, complete with all files (see below for details). I have made the "iTunes Library" in Users/catherine/Music the iTunes Library for "clwaltrip" and had to change some permissions to do so. (It's interesting that under "Sharing and Permissions" for these folders, the users listed are "staff," "everyone" and "(unknown)"--presumably "catherine" should be in there somewhere, but it is not and does not come up on the list when I select "+" to add permission for a new user.) I have added "clwaltrip" and given it Read & Write access to Users/catherine/Music, Users/catherine/Documents and Users/catherine/Pictures and applied all to enclosed items. I have not yet checked to see how well those permissions changes worked, nor have I physically moved any files from Users/catherine to Users/clwaltrip.
I hope that all makes sense so far. I have backups of Defective MBP and First MBP, both before and after the Erase & Install mentioned in the first paragraph. (I actually have oodles of old backups and computers with most of my original files on them, if I need to start from scratch somehow).
So. Replacement MBP now shows ONE user account in System Preferences--clwaltrip, the one set up by the initial setup screens when I took the computer out of the box and could not get setup to access the Time Capsule, as explained above. But Finder shows TWO User folders--Users/clwaltrip (from initial setup) and Users/catherine (migrated from the TC backup of Defective MBP). I used the option to transfer accounts, settings--I checked all boxes, in other words, and I only selected the "catherine" account to transfer from the TC backup (because there was only one account on Defective MBP when I last backed it up, as explained above).
Yes, the Macintosh HD/Users/Catherine folder appears to be "orphaned" in that it does not show up in SysPref, but otherwise appears to have normal enclosed folders--Desktop, Documents, Downloads, Library, Movies, Music, Pictures, Public & Sites. And from what I can tell, it contains exactly what the "catherine" Home folder looked like on Defective MBP--same Desktop shortcuts, same enclosed items in catherine/Music, everything.
About the red "no access" badge--back when I had two user accounts on the Defective MBP, I used to see the no access badge when trying to access "clwaltrip" folders from the diagnostic account, "catherine". But I altered privileges while logged in as clwaltrip to allow catherine Read & Write access, in order to transfer the clwaltrip files to catherine. The red badge went away and it does NOT show up on the items in the Users/catherine folder when viewed from clwaltrip on the Replacement MBP.
You know, I think I knew that about the TC USB port at one point and just forgot. I'll put a Post-It on the TC to make sure I remember from now on.
Thanks for your patience!

Trouble Importing files to Pro CS3 and also getting default workspace

Hi guys, I'm a newbie and only using Premiere CS3 3.2.0 (with update recently installed) I'm on a Vista-based laptop, 2.5Ghz, 4mb RAM, plenty of hard drive space.
When I start a new project in Premiere CS3, in the New Project window, I go down to XDCAM EX, (shot with Sony EX 3), and highlight 1080p. Usually I get text in the description box but right now I'm not getting anything. And when I give the project a name and click OK, I get a blank workspace; no default timeline bin or file bin or monitor windows. I get nothing.
I have files on an external 250gig IOMEGA hd. Having trouble importing these files into the project. Can anyone help with any ideas of how to get started? Thanks!
UPDATE: I'm still getting a blank workspace when opening up a new project.
I have since attempted to import files from the external HD. It appears the files transferred over but I have no idea where they went. I saw the bar accept the files but cannot find the files listed anywhere in Premiere. Can someone please help?

OK, this used to work. Is that correct? Now it does not, or appears to not work. When that happens, something has changed.
The task will be to determine what might have changed. Have you had any OS updates lately? First, these can render display drivers obsolete instantly. Though it sounds like most of your GUI is displaying fine, some updated GUI info might not be, like the Timeline and Project Panel. Check to see if you have the latest display driver.
Since you have updated to 3.2 (normally a highly recommend thing to do), I would be interested to know if this behavior started before that update, or if it started long after 3.2 worked for you. Redoing the update might be like a Repair Install. If not, I think that I would try a Repair Install to see if something has been broken along the way.
I know that none of this really points to a cause, and probably does not point to a cure.
Along the way, tell us more about your entire system, both the hardware and the software.
Last, do you happen to have Window Blinds, or have a MS mouse with an InteliPoint mouse driver? I know that sounds like a weird question, but I have my reasons.
Good luck,
Hunt

I'm having some troubles with videos transferring

I just bought a Ipod video 30gb. I can transfer songs and photos but not videos. in Itunes i see my videos but i seems like it doesnt transfer on my ipod, and also i transferred videos in .mp4 (as suggested) and Itunes doesnt even show them to me when i want to add them to my library.
I'm kinda lost here can somebody help please!!

as for transfer your video to your iPod make sure "automatically update all videos" is selected.
and as for your other question what did you use to convert the files? i have had troubles converting files with Quicktime. it doesn't always seems to work.

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

Problem with Jabber and file transfers WAN - LAN-Users - a solution!

Hi,
I read a lot of messages about problems with file transfers between iChat-Users, if one (or both) are behind a NAT.
I had this problem to and found an easy solution:
My situation
iChat-Server behind a Netgear ProSafe FireWall. I opened the needed Ports including Port 7777 (the Port for the iChat-proxy (proxy65).
The iChat-Server is configured to host the domain "server.ourdomain.com" (as an example).
This address can be reached from the LAN and also from the WAN-side.
From the LAN-side the DNS redirects to 192.168.1.1, from the WAN this domain redirects to our official IP-address (the WAN-IP of the FireWall).
I tried nearly all kinds of mentioned solutions, but nothing helped.
The really easy solution is: I just added our official IP to the "Hosted Domains" in the iChat-section of Server-Admin.
After that change, the transfers are made via the proxy65 of iChat-Server. The transfers are shown in the log /private/var/jabberd/log/proxy65.log.
I think, that the other posters who also have this kind of problem are working in a similar setup (domain name of server is used from the LAN AND the WAN-side with different IP-addresses (LAN-IP & WAN-IP).
This solution will only work, if the WAN-IP is a fixed address.
svenc

Until the introduction of file promises in AIR Athena, it has never been possible to drag remote files out of an AIR application.
You could refer to the http://www.adobe.com/devnet/air/flex/articles/using_file_promises.html
Hope this is helpful. Please let me know if I could help more.

I bought a new computer, and i have transfered everything using home share, file transfers, etc.. yet still when i go to sync, itunes tells me ipod can only be synced with one computer... is there a way to retire the relationship with the old computer?

i bought a new computer. the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer? i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..

if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it.

Is there a way to prevent LR from reducing size (pixels) of files transfered to Photoshop as a psd file for editing?

The subject line says it all. I have discovered that LR reduces the size of files transferred to Photoshop for further editing when compared to the same RAW file processed in ACR in Photoshop. For example, a psd file created by LR from a 36 MB RAW file will typically result in a 100 MB psd file. The same RAW file processed similarly in Photoshop will result in a file around 300 MB. This makes a huge difference when the files are converted to JPEGs for printing. The smaller LR psd files result in JPEGs typically under 500 KB where the Photoshop JPEGs are typically around 1.5 MB.

Whew! I didn't think this would turn into such a long discussion!. OK - my error, spatial data not color. But that is loosing focus on my question. My objective is to get the best print possible from the final JPEG file used for printing.. As previously noted, for a given RAW file w/similar adjustments but with one processed in LR and the other in PS , a print made from the larger of two resulting JPEG files, the larger JPEG file resulting from only PS ACR processing (i.e., no LR) will result in a better print. Elie-d appears to have answered my basic question. If LR will always pass a 103 MB file then I assume there is no way to change this size. In case anyone is interested here is some additional info for consideration. Both LR & PS using 8 bit mode and 240 ppi.. Procedure in LR: 1) download RAW files from camera CD; 2) make adjustments to photo; 3) using Edit in External Processor, photo transferred to PS in PSD format, 8 bit. 4) file size around 100 MB (103 MB per elie-d). Procedure in PS: 1) download RAW file to hard drive with Nikon View2; 2) open file in PS - auto opens in ACR; 3) apply essentially the same adjustments (e.g., exposure, highlight, shadow, etc) ) as applied in LR; 4) file opened in PS editor; 5) resulting PSD file size with no further processing (i.e., no layers, etc.) is 310 MB). The resulting JPEG file created from the LR PSD is typically less than 200 KB whereas the JPEG from the PS PSD will generally be around 1.5 MB. As an academic question it would still be interesting to know why one gets different size PSD files from LR and PS and what, if any, affect this has on print quality. As for now I will not use LR to process RAW files. I prefer the larger PSD & JPEG files I get using just PS

How to find out the size of files transferred over the SQL * Net?

I am trying to test the Advanced Compress (AC) for 11g Data Guard. When the AC is turned on, the archived log files are supposed to be compressed on the primary database server and sent over SQL*Net, then decompressed on the standby db server. We will see the file sizes are the same on both primary and standby servers. I want to verify that the AC works by monitoring how much data are sent over SQL*Net. Per Oracle, AC uses 35% less of the bandwith. That means the size of the files transferred should be at least 65% of the original size.
Is there a way to find out the size through Oracle utilities? If not, how to find out by OS utilities? OS is Solaris 5.10.
Thanks.

I'm not sure this can be done via SQL*Net, but a network packet sniffer between the two servers should be able to help - you might want to contact your network team.
HTH
Srini

Items In Use for File Transfers

Whenever I transfer several files at a time (7+ or so), I get the error "The operation cannot be complete because the item "(insert filename here)" is in use."
I have tried the lsof command in Terminal with no results. This happens with different files (mainly pictures, as I transfer those in large amounts) and from both local drives and card readers or USB drives. The files are usually being moved to a network attached storage that is in the Finder exceptions for indexing. The files aren't always new, so I do not think finder is indexing them. If I click "ok" (and in doing so cancel the transfer) and start it again, it works just fine (until it decides to hit another file and repeats the process).
It's a very annoying little problem because it forces me to micromanage large file transfers. Any ideas?

As a workaround consider
ditto
Sometimes I get a scrap file in the trash that cannot be deleted for the same reason, although I find no obvious cause. Sometimes it's the mail app and a stray RSS file, but not always. Even then I have to shutdown and restart mail, which is really not acceptable to me.
Usually a logout/in unhooks it but that's not a solution either.
You might try transferring the files using a new account with no apps running or even installed other than the defaults.

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fa

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fast. please

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

File Transfers in Chat Rooms?

We're running OS X Server 10.8.3. Is there any known way to have the ability to transfer files inside of a Chat Room? I find it mind-numbing that this isn't possible. We cannot use the chat room feature at all without this. Does anyone know of a way to get it to work or are we stuck now having to look for a third party chat room product?
thanks,
Ben

I'm not sure either of you understood my question. I'll try to make it more clear, in case anyone else has any ideas or feedback that could help:
We are using Mac OS X Server, 10.8.3. We are using the "Messages Server" service. When using a "persistent chat room" -- one of the supposed features of OS X Server. From http://www.apple.com/osx/server/features/#communication ...
"Messages Server brings the collaborative power of instant messaging to your organization. Now workgroups can transfer files securely, share group messages, conduct audio conferences, even broadcast a presentation, movie, or photo slideshow to other Messages users running OS X."
And from the OS X Server product overview PDF, pg. 18...
Group Collaboration Made Easy
Messages Server works with OS X to automatically populate users’ buddy lists with
members of the groups to which they belong, so it’s easy for them to start communicating. And thanks to store-and-forward functionality, Messages Server allows users
to send messages to buddies who are online, combining the advantages of instant
messaging and email.
Messages users can request Messages Server to create and host a persistent chat
room. Perfect for virtual-team scenarios, project-specific discussions, and real-time,
blow-by-blow updates, the chat room allows individuals to join at any time, leave
when they need to—even log out and shut down—and still come back to review
all communications from the time the chat room opened.
Here's the problem I'm perplexed by:
File transfers work just fine when doing 1-to-1 chats. However, in a "Chat Room", they do not work at all.
I realize that this may be "just how it is" but I was wondering if anyone had any knowledge of a way to make it possible. Seems like a ridiculous limitation, and one that makes the entire (otherwise useful) feature of "persistent chat rooms" all but moot for us.
thanks,
Ben

Disconnect from WiFi Button in Yosemite (Faster File Transfers via Airdrop)

Hi all! Just thought I'd share a great new pro-tip I found that's pretty handy.
Sometimes file transfers through a complex or busy network with a (think hotel lobby or coffee shop), Airdrop file transfers can run extremely slow vs. it going from computer to computer via no network (Ad Hoc). I was determined to find a work around for disconnecting from a WiFi network without turning off Wifi.
Anyways, Yosemite introduced a much asked for feature - The disconnect from WiFi button! Just hold down option while you select the WiFi indicator on the menu bar and click disconnect! Your WiFi will continue to be on and it simply won't connect to that network again. If you now search for other computers in AirDrop, it will find them and be a much faster computer to computer connection.

Testing in a new User will quickly tell you if the problem is system wide or if it's your User's folder that contains the problem.
CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups Switch to the New User by logging out/in or use Fast User Switching.
Enter your Apple ID and password.
Test Markup in Mail using the iCloud account.
Continue testing to see what works in the new User.
Do you still see the issue?
If yes, then the problem is with your base files.
If no, then the problem is in your User's folder.
Finder - my iMac name is - iMacs iMac. All of a sudden it become iMacs iMac (2) and latter iMacs iMac (6). What are these numbers ?
In System Preferences > Sharing you can see name. When Finder adds a number it indicates it's seeing another drive with the same name. You can select to rename but this could also be an indication of issues at the base level.
Do you have an external drive that could be used to clone your drive in case you need to do a clean install?

File transfers not working

my file transfers have suddenly stopped working, they start and crap out around a quarter of the way through. the majority of people that im talking to are not on ichat but aim on windows. what can i do, and if i have to delete and re install how do i save my buddy list?

Hi:
If you think your iChat problems might be from corrupted ichat preferences files, the "sledge hammer" approach would be to delete the five com.apple.ichat.*.plist files that are in your Home folder's Library folder's Preferences folder. The next time you launch iChat, it will be just like a first-time-ever launch of iChat, so you will need to re-enter all the iChat account information when the iChat startup wizard launches, and your iChat preferences, in particular, remembering things like resetting your iChat > Preferences > Video > Bandwidth to None and stuff like that. Your buddy list is maintained on AIM's servers, not your computer, so it's safe.
(if you find that this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons above)

Music file transfered from PC does not appear in t...

Some of my music files transfered from PC does not appear in the music player in the cellphone but they appear as rigntone..NOKIA N81
How will i resolve it??
Can someone help me?
Please reply, it's urgent.

Hi Irosenth
Thanks for the answer. I am not sure I understand your question though.
We have a collection of reader enabled pdfs that the user can open in a webbrowsercomponent in a .Net winform.
We used to (Reader 9.4 and before) replace the Readers "save pdf" button with our own "save pdf" button that
- saves the pdf
- exports its data as xml
- send a message to the .Net winform that the pdf has been saved.
We implemented our own save button and its functions using a plug-in.
Now I can't find our "save pdf" button in Reader X. That is my problem.
So I try to create a new toolbar and place our "save pdf" on this new toolbar as you adviced me.
I expect the toolbar to show up in the Tools pane in the webbrowser component in Reader X.
But it doesn't. There is no Tools pane when I open the PDF in the webbrowser.
(btw all the keyboard shortcuts we have created in the plugin (ie CTRL, ALT, L) works fine - so the plugin generally works).
When I couldn't find my toolbar with its button in the webrowser, I tried to open one of the reader enabled pdfs in the Reader X as a standalone application.
This was just as a test to see if it worked any different from the browser plugin. It is not part of our use case.
But I noticed that in the standalone Reader X I do have a Tools pane, and my new toolbar but no "save pdf" button.
This is how it looked with Reader 9.4 and before:
OK the red text in the screenshot is quite difficult to read. It says (from above)
"We have replaced the Readers save button with our own save button in the plugin.
This is the (selvcreated save) button I miss in Reader X"
"This is a Reader enabled PDF shown in a webbrowser component in a .Net Winform"
"The users only have the Reader, not Acrobat"
Best regards
Jan
Message was edited by: Dafolo_Jan

Trouble in file transfers...

Similar Messages

Maybe you are looking for