Trouble setting preferences in 2.1.1

I am not seeing all the preference settings in 2.1.1. The only one I see is the new Mobile Me one and I don't have a way to select any of the other panels.

OK - I got them back - but I had to trash the aperture.plist file.

Similar Messages

HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

Having trouble setting up my website. It's probably a silly mistake.

So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just plan

No. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
Try altering this and it should work okay.

Trouble Setting Form Defaults

I wanted to write a form to write to the user preferences. This works fine.
I'm having trouble getting the user's current setting to come in as a default. The value can be retrieved from a function call, but the form errors when it tries to execute the call.
I have the field value default set to wwpre_api.value.get_value_as_number('path','name') and the type set to 'function returns number'. Don't worry about the syntax, I think any function call could go in its place.
Anyone get this type of thing to work? Is there a better approach for a form that sets preferences?

I am sorry George. I am very new to this. I believe I made all fields unlocked by selecting all, entering properties in one while all were selected and insured the lock check box in the bottom left of the popup was unchecked. I even checked it and then unchecked it to insure it was applied to all. That didn't make any difference. Then I finally found where to see the comments (which I assume is what you meant by annotations.) I deleted them all. Still no difference. What am I doing wrong? short of doing every field one at a time I don't know how to check to see if there are any fields locked or there are any annotations. I also could not find where or how to turn off annotations or marking edits.
I am attaching a link to the form after performing these functions and saving the form. Please look at and select form field 15 on page 4. Then right click on form field 42 on page 3 and select Set Fields To The Same Size. Options are still greyed out.
https://files.acrobat.com/a/preview/cdb47e60-8e3e-4acf-8c6c-604f04bdaddd
Thank you for all your assistance. I appreciate it and am disappointed in Adobe for not providing support for their product.
Another thought... Could this be something about my computer of the program? If so, how do you recommend I check or correct that?

I have trouble setting the trash mailbox behavior. I have set it to delete every month but it has been keeping the trash mails for only about 10 days. Please help.

I have trouble setting the trash mailbox behavior. I have had it set to delete the messages once a month. But lately it has been deleting my messages every 10 days. I have tried choosing different options to set the trash mailbox behavior but has not been successful. Is there anything I can do? Please help.

Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

Having trouble setting up email accounts in the mail app?

Hi Apple community,
I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
"Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Please note that my college account is run by gmail and ends in murraystate.edu
Thanks, Will.

Hey will,
okay for your college email. Heres what you do.
Try adding your email and wait for the message to come up
Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
Hope that helps.

Having trouble setting up FaceTime. keep giving me Apple ID password

having trouble setting up FaceTime. trouble at verifying use I'd. I have my email setup with different password since I have tw setup email. my Apple ID has different password. same email name.

Hello sangjaimepark,
Thank you for the details of the issue you are experiencing with activating FaceTime. I recommend reviewing the article below for FaceTime activation issues. When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thank you for using Apple Support Communities.
Best,
Sheila M.

Having trouble setting up network

Hi guys,
I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
I've also reset the airport as well with still no luck. Any help would be appreciated. Thanks

Have you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?

Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

How do you connect to the internet?
Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
Hope that helps.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

Are all security updates automatic or can I set preferences?

I was out for a couple of hours. When I came back to my Macbook I had a notification that a security update had been installed.
1) Is there any record anywhere of what update was installed?
2) Do I have any choice or can I set preferences about when and if downloads/updates happen and are installed?
I know there is a list here: Apple security updates - Apple Support
but I want to know if there is place on my machine where i can see the updates and compare . . just to see if, for example the December 22 update is installed.
I can also see other updates in the app store but I don't see any security updates and the updates that are listed there don't have any dates attached.
Thanks very much,
Michael

Thanks, I did have that setting checked for security updates but I guess it hasn't happened automatically, if ever. In fact, this article seems to be saying this was the first automatic one ever?
http://www.reuters.com/article/2014/12/23/us-apple-cybersecurity-idUSKBN0K108W20 141223
So, is there a place that I can see what security updates have been installed?
I can see all the app updates in the app store but not security "patches."
Thanks again,
Michael

How do i set preferences in LR 2.4 to convert all imports to DNG?

How do i set preferences in LR 2.4 to convert all imports to DNG? Is there any downside to doing this automatically?

There isn't a preference for automatically converting to DNG, instead you choose Convert to DNG within the File Handling section of the Import window.
Within the Import section of the Preferences panel you need decide how the DNG files are to be created. The following screen shot is probably the best choice for Lr 2.4 and later.

MSI X58 Pro - I'm having trouble setting up my first Raid 0 Array

Hey guys! I have an i7 920, X58 Pro, 3x2GB DDR3, Radeon 5850, 640GB WD Black (Windows 7 64 bit + applications) and 1TB Samsung F3 (backup) system and I'm having trouble setting up a raid 0 array. I recently decided to purchase two additional 1TB Samsung F3 harddrives in order to create a raid 0 array, while still keeping my original two harddrives separate. I installed the new harddrives today, installed the JMicron drivers that were on the drivers disk that came with my motherboard, went into the bios, and changed it from IDE to RAID. I then went into the raid bios, selected the two new harddrives and selected raid 0, saved everything and tried to load Windows and Windows refuses to boot up. I got an option to try fixing Windows but that didn't end up fixing anything. Finally, I was forced to go back into the bios and switch it from RAID back to IDE just to get Windows to boot up again. Does anyone know what I need to do in order to get this raid 0 to work? Thanks a lot in advance for your help!

Perhaps create a software RAID? You can do it in Windows through Control Panel --> Administrative Tools --> Computer Management --> Disk Management.
A quick guide: http://www.softwaresecretweapons.com/jspwiki/windows-7-software-raid-disk-partition-and-volume-context-menus

I just got a new ipad 2 but I having trouble setting it up, can someone help me. thank yoy

I just got a new ipad 2 but I'm having trouble setting it up, can someone help me?

Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Trouble setting preferences in 2.1.1

Similar Messages

Maybe you are looking for