Trouble shooting and plotting my ECG data (The VI. is included)
Hello Everyone
Im trying to simulate a ECG for a project. I choose the Wavelet Transform approach as I hear it would be more accurate and easier to create.
Ive created a sample ECG signal with noise imposed on it now Im atteplting to filter out the noise and detect and plot the real ECG data.
Ive come to realize I can't use a simple wave graph after the array function due to types of input data.
How do I graph my data?
Does youguys have any idea on the proper setting to get the best reading on my multiresolution analysis.vi ?
Any Help would be GREAT thankyou
Ive been staring at thie VI. for a long time....@_@....
Attachments:
ECG vi.vi 117 KB
The outputs of the Wavelet Denoise Express VI and the Multiresolution Analysis Express VI are of waveform (dbl) type. When wired into a waveform graph, your information should populate within these graphs. Another route you could look at going for your application is mentioned in this discussion forum. It is a simulate ECG Signal Express VI, which I believe will give you the necessary inputs you are looking for. This might be a little easier to implement.
David A.
National Instruments
Applications Engineer
Similar Messages
-
About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!
I've had my new one for less than 3 weeks. What gives? I'm loosing faith in appleno body?
-
I can't connect to the itunes store. I've tried everything in the articles for trouble shooting and nothing works. My library comes up, my ipod syncs, and I get no alert messages. I'm running Vista.
I can't connect to the itunes store. I've tried everything in the articles for trouble shooting and nothing works. My library comes up, my ipod syncs, and I get no alert messages. I'm running Vista.
-
My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 secOne then stops without connecting. Anyine have a solution to this issue?
I have an AT&T contracted iphone 5. Cannot send mms to anyone but other iPhone users. If you search the Internet, you'll see that the problem is everywhere...both the carriers and Apple are actling like the problem belongs to the other, or feigning any knowledge (which is kind of funny since the no MMS thing was in an ios6 beta that was released awhile ago, so I KNOW apple knows about it). No, I'm not running a beta (obviously, I just got my iphone 5). Awesome. Have a great camera on this thing, but cannot send OR receive MMS from anyone other than other iphone users. Gotta love it.
-
iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?
Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). -
I want to do photo shoot and i want to see the picture in I pad ? right a way!
I want to do photo shoot and i want to see the picture in I pad ? right a way!
How soon is right away.
You can use the Camera Connection Kit to load your photos from your cameras to the iPad after shooting.
Some people have also had success tethering their iPad to their camera to see the photo within a view seconds of shooting. There have been posts about this with Nikon DSLR camera on the Digital Photographers Forum.
Go to http://forums.dpreview.com/forums/
Search for iPad tethering and read the posts. -
Hey, i have an iphone 4, and it is upto date, the problem is that my phone does not play any videos online except on facebook, all other videos do not play instead a crossed play sign appears on the video. Please help.
I watch YouTube videos on a regular basis - mostly with the YouTube app but also with Safari.
Some YouTube videos are supported to be viewed on a computer only or with a Flash capable device, which is becoming few and far between since Adobe no longer supports Flash on any mobile platform.
Sometimes I get this video cannot be played on this platform, but rarely. -
How do you open multiple binary files and plot them all on the same graph?
I have three different binary files and I want to plot all 3 of them onto a graph.
I am familiar with opening and reading a single binary file. (Thanks to the help examples!)
But to do multiple numbers at the same time? I was thinking of putting 3 different 'reading from binary file' blocks with the rest of the 'prompts', 'data type', etc.. and then connecting them on the same wire.
However, I got into a mess already when I tried to read one .bin file to dynamic data type --> spectral measurements --> graph waveform. The error was Not enough memory to complete this operation... Why is that? That didnt happen in the help example "Read Binary File.vi"... Has it got something to do with the dynamic data type?
Thank you for your time.
Jud~Have a look at the image below and attached VI. Simply enter the different paths into the PathArray control.
R
Message Edited by JoeLabView on 07-30-2008 09:59 PM
Attachments:
multipleBinary2Graph.vi 18 KB
multipleBinary.PNG 5 KB -
I have purchased TRANSLATE SMS and it does not translate.
I have done all the trouble shooting that apple advise and still nothing.
Has any one got any suggestions?When you contacted the developer, what did they say?
-
Firefox version 3.6.10
I followed to the link to the article:
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
And went to "error -228" and followed this instruction>
"On Linux, this error can be caused by IPv6. To disable IPv6, go to about:config and find the preference network.dns.disableIPv6, then right-click on it and toggle it to true. This change will require a restart of Firefox. "
This fixed the problem and I can download plugins and extensions without difficulty.
Thanks.
Richard9 -
I'm at a loss. I have done everything on Apple's Troubleshooting list to try to access my laptops music files on my Touch, but there is still no Shared folder in the More section of my Touch's music. I've restarted and updated everything, unathorized and reauthorized both devices, toggled home sharing on/off, allowed the relevant ports to pass through my router's Firewall, and have turned off the Firewall on my laptop. Nothing. Nada. It is a 4th gen Touch. ***.
Does anybody have a hail mary of an idea to get this freaking home sharing to work on my Touch? Grrrr.So. When i turn search for my library from my ipad the little grey boxes appear with the names of the tv shows on them before the artwork is loaded. but on the 5 shows im having an issue with they remain blank.
I then deleted thhe 5 shows from my library and then re added one ofthem only changing the info-name to aaaaaaa and changing it from a home movie to tv programe. This did work for a short while. the name appeared on my ipad with the correct tv show cover. then after about a minute the name went blank and the album cover changed to a cd in my music library.
I had a similar issue with some of my other tv shows. i.e. when i tapped american dad on my i pad, there was 2 little boxes that said no season. so i clicked on the top one and it was just the pilot. so i went in to itunes to investigate and in the metadata the artist had been filled in as (1). so i deleted the number from the artist pane and that sorted that issue out. i checked the rest of the tv programs and there were a few issues but using the same method that sorted them all out.
I then went back to sort out the other 5 shows out. i ticked every box in the metadata to clear everything and put the show name as show 1. and changed from home video to tv program. when i added the show again the same thing happened. Appears with no show name. then after a minute it changes the picture again. Ill keep posting updates until its fixed. cheers -
Don't understand why my Imessaging stopped working. If I go to settings messages and check out Imessaging it just says waiting for activation.
Change the DNS servers of the wifi network to 8.8.8.8, 8.8.4.4
Go to settings>general>date&time> set automaticly , turn it on if it wasn't
then settings>general>reset>reset network settings
restart the phone -
Is anybody having trouble loading and maintaining g-mail in the Mail program?
Since I upgraded to Yosemite version 10.10 on my MacBook I have had difficulty with the Mail program, either failing to load g-mail or deleting it once I have opened it on my iPhone or iPad. Is there some setting that needs to be changed to keep this from happening?
Yes I did and it works then it doesn't... i dont know why
-
Trouble shooting and Error handling / Alert Messages
Hi,
SAP - Xi - File or File - XI - SAP
1. I am presumming that when SAP is down then alert management can send message to receiver .
2. But when XI is down can I send alert to receiver that XI is down, how can I acheive this. Please provide me the steps also.
3. And if FTP server is down and XI can't send file then what happens, does XI keep trying to send file to FTP. Is there any way we can send alert to someone that FTP is down.
Regards
RinkuHi Rinku,
if you are talking about CCMS installation and configuration,
This could be a good start
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d724f879-0901-0010-219b-af6665b95fee
The below links talks more about configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b
FAQ on CCMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
Maybe you are looking for
-
aoa! plz help me, i got following error when i run report through forms on application server 9i, forms run successfully, but report not. the error is "FRM-41213: Unable to connect to the Reports server misdb" thanks in advance.
-
B2B Message Error - Decrypting S/MIME message failed
Hi, Am getting following error when i receive the inbound message from trading partner I have set up the certificates on both sides. [2010-04-15T19:53:18.981-04:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkMan
-
Object as Reference not working..Please help..!!!
public class GG{ public static void main(String[] args) { Integer i = new Integer(10); System.out.println("Before Call:"+i); change(i); System.out.println("After Call:"+i); public static void change(Integer x){ x=20; Here the output is coming Before
-
How to clear off Jpanel off its components?
hai forum, In my project i have to select a method when textfields to enter its parameters will be displayed in a panel(which is inside a scrollpanel). When i select a second method(which is done using radio button) i want the previous panel screen h
-
Hi, We want to copy the CL_RSTRAN_TRFN class interface to custom class (Z class) and want to do change in method if_rso_tlogo_maintain~prepare. Copied the CL_RSTRAN_TRFN to custom one. When i am trying to activate it giving error message as "You cann