Trouble shooting techniques

Hi All,
Kindly tell me trouble shooting techniques or methods for oracle weblogic server 10.3 to resolve issues.
Thanks in advance.
Balaji kumar
Edited by: user9284716 on Sep 21, 2010 5:25 AM

Few links that may help you:
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/trouble.html
http://download.oracle.com/docs/cd/E11035_01/wls100/cluster/multicast_configuration.html
http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs100/jdbc/troubleshooting.html
http://download.oracle.com/docs/cd/E15289_01/doc.40/e15059/sys_hangs.htm
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/jms_admin/troubleshoot.html#message_life_cycle_logging
http://unixlead.com/blog/?p=29
For the rest as Bob said,you have to be specific.
Regards
Girish

Similar Messages

I had a 1 TB Drive that was connected as a back up, but it is no longer recognized by the mac. How may I trouble shoot to reconnect?

how do I trouble shoot this?

emanwine wrote:
Got it to connect and it is my back up. ...
Good News.
If this is your only Backup would suggest getting a New EHD and creating another one... Preferably a Clone if you don't already have one.
http://www.bombich.com/
Can never have too many Backups...

I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up

I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up

Could be since it (security software) is listed as #5 in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

TS4268 Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working

Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working

Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps!

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

I can't log into my iTunes account. I logger out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. Now when i press sign in and then choose existing Apple ID, nothing happens

I can't log into my iTunes account on my iPhone 5s. I logged out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. I then tried to log back in immediately afterwards. I was unable to do so. After clicking "sign in" at the bottom of the apps main page, it brought up another menu where I clicked "Choose existing Apple ID". After pressing this the menu disappeared and nothing happened. I tried this multiple times and received the same result each time. I tried the other available option of creating a new AP ID to log in with and that one worked perfectly fine. I am clueless as to why the log in for me is either not able to load or just completely blocking me from getting back into my iTunes account on my phone. Not only can I not listen to the music I currently have, but I cannot log in to purchase the new music that I wanted to with my unused iTunes gift cards

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

Kisight: How do I get my iSight working ? Trouble Shooting an iSight Camera. (Version 3)

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Trouble shooting guide! Read this first!!!! rev 13-1-2004

(Revision 13-1-2004)
Hi there,
Follow everything on the list, even if it doesn't look like it would solve your problem, most problems are created somewhere else!
To give some examples:
CPU won't run FSB133....mostly powersupply or CPU-cooler.
Videocard won't load drivers....mostly powersupply.
Sound won't work.....mostly metal-standoff's.
Windows won't install, file read error.....mostly CPU-cooler, Bad-ram or powersupply.
That is why you need to go over the entire list and check all!
Before you start doing anything, remove the power and make sure that you have touched the metal case of your system. If you don't you could damage your system due to static discharge!
Thanks to Arioch and Dragon60 for comments on this.
There are several reasons why this happens.....to name the most commen:
CPU speeds
You have a Duron, that CPU is 100FSB!
You have a Athlon(XP) and it's showing the wrong speed, set the CPU-FSB to 133....
Or 166 when it's a FSB333 CPU....or 200 when it's a FSB400 CPU....
Some boards have a jumper to set it, other do it in the BIOS.
Check your manual for this.
Speeds must be:
Duron upto 1300MHz = 100MHz (=200DDR)
Duron from 1400MHz = 133MHz (=266DDR)
Athlon B type = 100MHz (=200DDR)
Athlon C type = 133MHz (=266DDR)
Athlon XP - C type = 133MHz (=266DDR)
Athlon XP - D type = 166MHz (=333DDR)
Athlon XP - E type = 200MHz (=400DDR)
Use this link to see if your motherboard actually supports your CPU.
The TBred CPU's (0.13) start from XP-1700 and up, but not all boards support this CPU and they either show on the D-LED all red or don't start at all!!
The K7T266pro2 is an exception, it can be made to support the TBred CPU's, on this link you find all the info on how to make it work.
Many reports have told us that FSB333 CPU's work on KT3-Ultra boards work just fine, but it's unsupported by MSI, we don't know why....
As for mulipliers with AMD CPU's, just set them Automatic, as they are hardcoded on the CPU themselves and will allway's be correctly, even if if you think the BIOS doesn't know it.
How to recognise the CPU:
If you look on the dice, there are letters after the speed.
The last letter will tell you the FSB of the CPU.
B=100MHz (=200DDR)
C=133MHz (=266DDR)
D=166MHz (=333DDR)
E=200MHz (=400DDR)
To recognise a CPU quickly, checkout this link.
Thanks Mellops.
The MHz setting must match your setting in the BIOS for FSB value, as it translates to the correct FSB setting for the CPU.
The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
Detailed information on the code can be found in this AMD document. (Thanks Hans)
CPU Cooling
CPU cooler not made for your CPU, check if it can handle your CPU....
CPU cooler mounted wrong!, take it off and check it as it will fit 2 way's, but only 1 is the right one, examine very carefull!
The cooler has a lower part that needs to go over the bump (higher part) of the socket, if it's not over there it won't cool the entire dice and WILL give you trouble.
Also check if it's making contact with the entire dice of the CPU...
Make sure you regrease it again, the same grease/paste can't be used twice!
YOU MAY NEVER USE A THERMALPAD OR GREASE AGAIN! APPLY NEW EVERY TIME YOU TAKE THE COOLER OFF!!
top 2 show how not to do it
Used too much silver-grease! It will shorten the bridges on the CPU, clean it and use white-paste.
(Silver-paste is not recommended in any case!)
The latest AMD XP CPU's (XP-2200 and above) require a copperbased heatsink because the dice is smaller and generates far more heat per square cm then the "old" CPU's do.
How to check the cooler before taking it off.
There is a simple way to check the cooler without taking it off.
You do this by first checking your idle temp with PCAlert, it should be below 50-55C.
Then you download a client from www.distributed.net, let this client run for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
If it still goes up or the system crashes, there is a big chance you mounted the CPU-cooler wrong.
When you can't run this check, try with FSB100, if the system does run the check then, it could be well that the cooler is mounted wrong or your powersupply doesn't have enough power.
***** YOU CAN'T CHECK THE CPU COOLER ON TEMPS OR FAN RUNNING, IT MUST BE TAKEN OFF THE CPU!!! *****
Cleaning the CPU and Cooler - thanks to Dragon60 for his addition.
An additional comments about this is what you clean the CPU with in this situation. The best thing to use is isopropyl alcohol. If this is not available then metholated spirits would do.
Make sure you allow the CPU to dry properly before you put it back in. This also means DO NOT try and clean it whilst it is still in the socket as some of the cleaning fluid, grease and dirt may get underneath and short some pins.
Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may disolve some parts.
Thanks Dragon60.
If you don't understand what we are talking about on this cooler matter, then read this link: AMD CPU & Cooling guide
Powersupplies
Powersupply too little, most commen cheap 300W CPU's can't handle an XP-1700 or above, try a better one to be sure.
Make sure your powersupply has about 185W combined on the 3.3+5V and that the 3.3V has 20A or above.
That should be enough for most systems.
On the latest boards the 12V has become very important too, expecialy with TBred CPU's.
Make sure yours can give 18A or more on the 12V line too.
I have found that a lot of cheap 350W will fail with modern boards and TBred CPU's.
Allway's make sure you have a decend PSU, it never fails to spent a bit more on that part!
Borrow a bigger one from a friend if you are not sure....
More info about powersupplies: Click here.
And the second you must read: Click here.
Powersupplies with these type of numbers on them or higher should be fine:
3.3V - 28A or better
5V - 30A or better
12V - 18A or better
Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!!
Do NOT trust the 300W or 400W rating on them!!!
Q-Tec is about the worst of them all!!
Metalclips
Stand-off's left between the board and the case, take the board out and check for too many of those metal-clips, they can shorten circuits and cause al sorts of problems (most of the time audio problems)
RAM
Ram problems, don't try to run with PC100 (SDram boards) when you have a 133FSB CPU, get PC133 ram of decend quality.
In any case, don't use cheap quality ram (Crucial seems decend, but give's a lot of problems, I consider these cheap quality too :P ), replace the ram with another brand to see if it fixes it....
DDR ram speeds:
Duron upto 1300/Athlon-B =100FSB=PC-1600=DDR200
Duron from 1400 =133FSB=PC-2100=DDR266
Athlon-C/XP upto 2600 =133FSB=PC-2100=DDR266
Athlon XP D-type and above =166FSB=PC-2700=DDR333
Athlon XP E-type and above =200FSB=PC-3200=DDR400
Higher DDR speeds are only a must if you try to overclock, they have no speed gain if run at the correct speed. You may use faster ram on a slower system, the speeds given are what is needed minimum.
Perform RAM test tools, ie http://www.memtest.org if you suspect RAM is faulty, such as BSOD or data corruption. [added by Maesus]
Try your system allway's with 1 stick of ram, adding more sticks can give all the trouble too.
Some sticks just won't work in pair and a lot fail when you put 3 or more in the system.
When you want to use 3 sticks, make very sure you use the MSI tested ones, they are your best chance that they work without problems.
If still nothing, try to seat the ram in another slot, sometimes they work better in another slot.
Thanks boost
Or rise the Ram voltage a little, be carefull doing this!
Sometimes this works when you have a lot of ram in there.
BIOS
BIOS settings not right, clear the CMos and start with the default settings, if it works, try setting ONLY the FSB to 133 if needed, nothing more.....
And go further from there......
Clearing CMos
When you clear the CMos, make sure that all power is cut from the system.
This is done by takeing the wall-plug out or use the switch on the powersupply to turn it off.
On most boards, as far as I know all MSI boards, you must set the JBat1 to position 2-3 (clear position) for about 10 seconds, then set it back to 1-2 (keep data position)
After this your CMos should be cleared and you can turn the system back on.
In some rare cases it's needed to take the battery out too for a minute or so.
It can happen that the system will prompt you to set the BIOS again, go into the BIOS and set everything you need, then save the settings.
Thanks fguevara.
Harddisks
Harddisk is giving problems, most of the time with WD drive's, they are jumpered somewhat strange compared to others:
No jumper = Stand-Alone no other drive attached to the cable.
Jumper master = if you have a slave drive attached
Jumper slave = when it's slave to another drive
Harddisk is doing weird things:
Make sure you have connected the blue connector to the board, and don't let the other end of the cable unused, make sure there is a device connected to it.
The middle connector can be left into the air without problems if not needed.
IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
Click here for DFT
Other brand drives can have problems too, make sure they are ok, as harddisk failure can cause all sorts of problems.
Allway's be sure your harddisk is in tip-top shape, if not, replace it and try another to verify.
For more information read this: Click here.
To know what harddisks your motherboard support, use this link.
To enable harddisk over 137GB in Win2000 edit this registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
"EnableBigLba"=dword:00000001
The KT4 raid boards only support 1 harddisk on IDE3, the rest must be SATA drive's!!
Harddisk/power led not functioning - thanks to Tweetyoost
If your HD led or power led not work try to switch(wrong + or - side) the connectors on the motherboard.
leds will work only when + or - is correct
Thanks Tweetyoost.
Floppy drive's
If your floppy drive doesn't work or the led stay's on all the time.
Make sure the floppy is set correctly in the BIOS, as the BIOS doesn't autodetect a floppy drive.
Check the cable, make sure the twist in the cable is at the floppy-drive side.
If the light stay's on, flip the connector at the floppy-drive arround.
Sometimes it happens that even after all this, they still don't work, try with another drive from another brand.
Not able to enter the BIOS or lockup
When you try to enter the BIOS it won't go in there or
lockup, but your system is running fine.
This symtom can happen when your CPU-Cooler is giving spikes on the coolerwire.
Try with another brand of cooler to test if it solves it.
Keyboard and optical mouse lights stay on after power off[/U]
Some motherboards have a jumper called JKBV1, this jumper is located (mostly) near the keyboard connector, put it in the other position.
If your board doesn't have the jumper, try to find the following BIOS settings and turn them off:
resume on KBC
resume on PS/2
resume by alarm
USB ports not working[/U]
Check in the BIOS if the ports are enabled.
USB2.0 ports are supported in Win2000+SP3 and XP+SP1, just let the OS reinstall the ports and they should work.
Thanks Stygge
Replacing parts and the system won't boot after
It's never a good idea to replace stuff like CPU and ram without taking the board out of the case.
But if you still like to do so, please support the board, because if you don't you might bent the board a little and cause other components to make bad contact.
Allways support the board when you replace stuff, no matter what!
Also make sure your system can take the replacement, it could happen for example that your powersupply can't handle your changed videocard from GF2MX to GF4Ti4600.
Test all the parts in another system
Make sure that the new part is in good working order in the first place (in particular: videocard, CPU, memory): try it in another system, or have it demonstrated by the one you bought it from if possible.
Testing might also give you a clue on what is actually wrong in your own system.
Thanks HansH.
Checking the powersupply
Don't do this if you don't know what you are doing!
Disconnect the powersupply.
Orientate the 20pin Powerconnector with the clip up.
Locate pin 4 and pin 8 top row, mostly green and black wire.
Use a wire to short them (or better a 12V test lamp).
Now connect the power and the fan inside the powersupply should start spinning.
If it doesn't your powersupply maybe dead.
Thanks HansH.
KT4 users
Please read the Un-Official KT4 guide if you have CRC errors or strange crashes.
These can be BIOS problems.
In any case !!!Only flash if the system is stable!!!
Set default-settings and FSB100 to make it stable first!!!
Motherboards making a Siren-sound
If your board is making the sound of a firetruck, BEEP-BOOP-BEEP-BOOP...
Check the folowing:
1. CPU too hot
2. chassis intrusion was enabled in the BIOS
3. PSU is below min/max allowable value
Stutter in audio
Remove your antivirus software.
We have heard a few cases where the stuttering was created by badly behaving antivirus software.
Disable cpu halt command if it's in the BIOS (Thanks Pascal16)
Windows
Windows2000/XP won't run stable, try to disable APIC and install again....
Not all drivers/devices like the APIC.
Windows2000/XP won't install USB2.0, install the latest servicepak (SP3 Win2000 or SP1 WinXP).
Let Windows rediscover the USB ports, they should work now.
If you have driver or other problems and don't know what to do anymore but Windows does function without crashing, read this: Click here.
Audio [added by Maesus, 20/2/2003]
Can't stream AC3 via SPDIF to external DD decoder? try this ac3filter [info provided by Manfred ]
Lan not working 100MBit
You could try this patch, seems to work on some boards.
The download-link is at the bottom of this post.
I think I have about covered all most commen problems....
Check those first before you ask us, as it's not fun to type the same over and over again.... :(
Another good link for trouble shooting is here: Link
If you have more issues that can solve problems, please write your thing below......
I will insert your comments in this guide, with credits, offcourse 8)
!!I will delete any attempt for discussion or problem report below this message.....!!
Please report back, in another thread, if your problem was solved and how you did it, this will help others a great deal.
It's only ment to help people as a guide to where the problem can be, start a new thread if this guide didn't solve your problem and you need more help!
This thread is only for the experts to guide you into a solution :]

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

When I try and launch Firefox, I get this error message A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help?

When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....

See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.

After updating to Firefox 4, it will not open. I end the Firefox processes in Task Manager per trouble shooting procedures; still not working. Removed and re-installed. No go.

Can I revert to an older version? I tried all your published trouble shooting procedures to no avail to get Firefox 4 to open. When I try to run it, there is a process running in the Task Manager but no task or program actually opens.
I never had any problems with previous versions.

There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

How do I find missing/lost bookmarks I tried the trouble shooting section i just couldn't figure it out

I had a bookmark folder & decided to add two more. When I went to my folders I could only find one new folder. When I clicked on it, it brought me to the second new folder. I couldn't get all three to appear under the bookmarks section. I retitled them because two of the three bookmarks had the wrong bookmarked items & then I lost the third, which had all the original bookmarks.
I've tried your trouble shooting section, I don't understand all of the information. I have been through the trouble shooting section several times trying different options. I've gotten myself so frustrated & confused :( I'm hoping for a little one on one help.
Thank you so much

First steps read the articles & do the following
# manually backup your current bookmarks (as they are now) see [[Restore bookmarks from backup or move them to another computer]]
#locate your profile, backup your bookmarks backups folder and the files it contains. See [[Profiles - Where Firefox stores your bookmarks, passwords and other user data#w_how-do-i-find-my-profile]]'''_how-do-i-find-my-profile'''
*also see http://kb.mozillazine.org/Profile_folder_-_Firefox#Folders
* put the new backups somewhere safe; outside any Firefox or profile paths
Now look at what you have and keep the best ones 
There are limits to what may be restored, depending on what you have done and deleted, but once you have taken the action above you have preserved whatever is there.
You can now try restoring any of the automated backups that Firefox has made for you (By default each of the last ten days). But take CARE any restore overwrites and destroys existing ones (unless it is from an HTML file then it is appended ). Always backup by exporting before you do a restore.
You may restore from any backup you have made by exporting the current state, you are not limited to just the automated backups.
Post back with how you get on and with any further questions.

About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!

About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!
I've had my new one for less than 3 weeks. What gives? I'm loosing faith in apple

no body?

My Ipod touch Is stuck in restoe mode. I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.

My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.

Did you try here:
iOS: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Next try on another computer to help determine if you have an iPod or computer problem.

My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

Trouble shooting techniques

Similar Messages

Maybe you are looking for