Trouble using open NAT Settings with Airport Extreme

I recently got an Xbox 360 and Xbox live. I have the Xbox wired directly to the Airport. Although the Xbox can connect to the internet, the process of finding other players is extremely slow. It can take up to ten minutes to find a game on Halo 3 for example. I quickly figured out that this problem is a result of the NAT settings on my Airport being set to strict by default. The Airport Admin Utility does not allow me to change the NAT settings to Moderate, it simply allows me to turn off NAT altogether. When I do that, it prompts me to manually enter several IP addresses, none of which I know. I have tried several addresses, and the Airport admin utility will accept them, but after I do this I am unable to connect to the internet at all, so my only option is to turn NAT back on.
It doesn't make sense to me that a device as well designed as the Airport would not at least give the user the option of changing their NAT settings to moderate or turn NAT off completely. I'm sure there is a way to accomplish this, does anyone know how?

Having similar problems, mine is XBox Live kicking me out during Halo games and showing a red connection (low). The Xbox seems to be connecting fineto eth airport (802.11n), so I think it has somethignto do with teh connection settings from the airport to the Internet (Comcast). It also takes a long time to set players. I have been looking for a good website for setting Airport configurations for XBox 360 and XBox Live. Has anyone found one?

Similar Messages

Can I use powerline wireless adapters with airport extreme

can I use power line wireless adapters with airport extreme?

Can this work?
Yes
I read somewhere that powerline adapters are not compatible with Airport.
That information is not correct.
If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

Trouble setting up wireless cameras with airport extreme

I am trying to set up my alarm dot com wireless cameras and am having trouble getting them to connect to my Airport Extreme. With my prior D-Link router, there was no issue, but since upgrading to the Extreme, I can get them to locate the network, but not connect.

Add me to the list of people with Netgear DM111P ADSL modem and AEBS(n)...I can connect fine to the internet directly from MB Pro to modem, and for the last couple months have used the Netgear with my trusty AEX, no problem.
Now I finally get my AEBS from Canada (here in Dubai, UAE) and I have wasted hours trying to get on the internet with the AEBS. I have it configured exactly the same as the AEX is! One works fine, the other not at all. Exasperating.
I am using the Netgear with PPPoA Bridging (the correct setting for the ISP here and what works with the AEX and direct connection). The AEBS shows it is getting the IP correctly and has a solid green light. My MB Pro shows it is getting an IP from the AEBS's DHCP server. And shows entries for the DNS servers.
Yet..no internet. From the number of complaints with this exact same setup...it ain't me...I have used and configured over a dozen routers and modems from all major manufacturers, used DSL/ADSL/cable, PPPoe, PPPoA, etc etc...and I'm stumped.
This is NOT a typical Mac product. I am not happy. If someone figures this out, you will have my admiration.

Double NAT Error with Airport Extreme and Airport Express

I have an Airport Extreme 802.11n base station which is connected to my DSL Modem/ Router via Ethernet. I have a MacPro which does not have an airport card installed so I bought an Airport Express 802.11n - which is connected to my MacPro via ethernet - and thus provides my MacPro with internet access.
Originally I had the APExtreme and the APExpress set up in a WDS - all worked well - my other wifi equipped macs and devices in the house connected to the network with no problem, but I did notice that the maximum throughput I was getting was 802.11g speeds - this is of course due to the overhead of the WDS.
I originally purchased these 802.11n devices because I wanted the higher throughput - so I decided to terminate the WDS and just have the APExpress (attached to my MacPro) "join" the wireless network instead of extending it - which works and I am enjoying the 802.11n speed.
So, I just upgraded a couple of my Macs to 10.6.2 and was going to start using "Back to My Mac" and I got the error that there is a double NAT address problem and that "Back to My Mac" won't work until this is resolved.
I know that going back to a WDS will resolve the double NAT problem - but I don't want to take the performance hit that goes with the WDS.
So, short of buying an Airport card for my MacPro (which would eliminate the need of the APExpress)
Is there any other way to resolve this double NAT problem besides WDS?
Thanks for any advice.

First of all thanks for your quick reply!
Connecting my MacPro to the Airport Extreme would be a serious pain as the DSL Modem and APExtreme are upstairs near the only connection point in the building to a phone line - and my MacPro is downstairs.
I suppose I could dig out a very long ethernet cable to perform the test. But before I jump through that hoop - please explain to me what you are trying to get at - in other words - what does it mean if this resolves the double nat error - and what does it mean if it does not?

IP address not being set using Win XP Pro with Airport Extreme

Hi,
I'd appreciate any information on this subject. I got a new Airport Extreme on Friday to replace my DLink G router. Basically is blew up. So I've got it set up and my Vista laptop is running just fine. However, my work laptop which is a Win XP Pro machine can not aquire a network address. It continually says "Aquiring Network Address" and then times out and disconnects. After a lot of looking around and checking out blogs I took a look and it seems that I cannot get an IP address. When ipconfig in cmd it shows not IP address and subnet, etc as 0.0.0.0. OKay, so I try to reboot, I've also tried release renew and still no go. I can connect with a cable to the Airport and receive an IP immediately and obviously I can get directly on the cable modem I am using with Rogers with no issue. So can anyone tell me why over the air I can't get an IP? Did I set something up with this XP Pro machine that doesn't seem to have a problem with Vista?
Any help would be greatly appreciated...I haven't been wired and years, slightly unsettling!
Thanks!

Okay I got it. I couldn't get an IP address and so I found another discussion. One person said to do this:
The "Limited or No Connectivity" indication is because the network adapter has failed to get its IP address by DHCP from the router and Windows has defaulted to allocating a "169.254" IP address.
Try repairing the TCP/IP stack and Winsock. Open a Command Prompt window ("Start > Run", type cmd and click OK).
To repair the TCP/IP stack, at the prompt, type...
netsh int ip reset resetlog.txt
...and press Enter
(note the spaces in the command line). The original prompt will reappear.
To reset Winsock entries, at the prompt, type...
netsh winsock reset catalog
...and press Enter
Exit the Command Prompt window and reboot the PC.
Well that did it! Off I go!

Using a second router with airport extreme

I have hooked up a second router to my airport extreme for the purpose of providing more ethernet ports. When I do this I disable the wifi on the second router and place it in a bridge mode to let the airport do DHCP.
However none of the PC's in the house can access the internet when plugged into this second router. My mac can access the internet through this second router, however. If I enable the second router's distributions of DHCP, the PC's can access the internet. I an certain this is wrong, however because if my mac is hooked up to this second router my "back to my mac tab" in System Preferences > Mobile me gives me the Double NAT error.
I have tried two different routers attached to the Airport Extreme with the same results. What do you think?

I don't think it needs to be spinning all the time, others disagree with me, whatever is the correct answer it doesn't matter as there is no way to stop it. Hopefully we will at least have the option at some time in the future to let it spin down.

Use an external HD with Airport Extreme to access it for data storage from computers connected to the WiFi network?

Can I connect My Passport HD into my Airport Extreme's USB port to access it from my computers (27" iMac 2012 now using Yosemite) on that Wifi network for data storage and retrieval purposes?

Yes, if the AirPort base station's hardware supports 802.11n. The drive needs to be formatted as Mac OS Extended (Journaled), FAT16, or FAT32, and may need to be connected through an USB hub with its own power supply.
(117777)

Using a external HD with Airport Extreme

I just purchased the Airport Extreme and am using an external HD with it, mostly for my iTunes collection so I can access it even when I am wireless. I am wondering if the HD needs to be spinning all the the time though, even when I am not using the HD (like when my laptop is off). It seems as though the HD is spinning as long as it is connected to the Airport Extreme. Is there anyway to have it stop spinning when not in use? I have tried using the disconnect feature and although it removes it from my desktop, the HD is still spinning. Please help.
Macbook Pro Mac OS X (10.4.8)

I don't think it needs to be spinning all the time, others disagree with me, whatever is the correct answer it doesn't matter as there is no way to stop it. Hopefully we will at least have the option at some time in the future to let it spin down.

Using an UMTS stick with airport extreme

Hallo,
my internet access is actually working only via an umts stick. Can i put this stick into airport express or extreme in order to have a kind of airport wlan for two macs or do i have to connect one of theme and get access via internet sharing?
Thanks in advance
Matthias

The USB port on the AirPort Extreme will support a hard drive and/or a printer while the USB port on an AirPort Express will work only with compatible printers (and a Keyspan remote for PowerPoint presentations), so you will not be able to use your "stick" with the AirPorts.

Can airport express be used as a repeater with airport extreme?

Can Airport Express be used as a repeater with an Airport Extreme?

Hi, it can but i have lots of problems because my mac keeps switching between the express and the extreme. This causes that my connection goes every time down and i have to switch off my airport (in my mac) off and on again.
Do you know how or where i can stop this from happenig?

Help using Windows XP netbook with Airport Extreme

I just brought home a Toshiba N205 netbook running Windows XP. When I try to use my Airport Extreme to get on the internet, the laptop does not see my wireless network, or any wireless network in range for that matter. I have my network protected by WPA2 Personal and I can see about a dozen other wireless networks within range when I'm on my Mac (I live in an apt building).
This is why I hate Windows! It doesn't work I don't know why and I doesn't tell me how to make it work. Help!!

Ok, I found the software toggle and turned on the wireless card. Funny, I thought it was turned on when I ENABLED the device but that's just Windowspeak for "Don't you know the function key idiot?"
The netbook now sees all the wireless networks in range...except my Airport Extreme network. I tried typing in the network name but no go.
What is the Network name (SSID)? Please help

Is there some magic to using a USB HDD with Airport Extreme?

I've gone into the airport utility and I the drive shows up there. So I messed with the settings because I want to share this 1TB Fantom USB v.2.0 drive that was formatted with NTFS and has about 2/3 TB of data stored on it. It has to be accessed by my Windows XP Thinkpad via wireless network as well as my XP desktop via my home ethernet network. The drive does not show up on my desktop or in finder. So I'm wondering what else needs to be done to have it show up as a shared device. I intend to install VMFusion and XP soon because I have a few Windows-specific programs that I own and need to run (Corel, Visio, etc.). But I should be able to see/access this drive right now on my iMac...maybe?

Well... I guess that solves that . Hmmmm... I'll probably have to put all that stuff on another drive, then reformat. What is HFS+? I have several of my DVDs backed up on the Fantom and they exceed the FAT32 size limits. Is HFS+ something that will work with Windows XP, Vista, and OS X without a hitch?

Using Seagate Backup Plus with Airport Extreme

I just purchased the AE to replace an old wireless router. I connected right away and that has been seemless. However, I had received a Seagate backup plus HD as a gift and would like to hook that up via USB 3 to the AE. When i plug it is I hear the drive start up, but from the Airport Utility, i can't seem to recognize the hard drive. Is there more configuration necessary, or shoudl this be "plug and play". Using a Mac Book Pro and don't see it in finder or hte Airport Utility. Note - I am not very technical so likely something very straightforward that i am missing. Thank you!

Unfortunately I don't have one of these drives to verify, but one of the first things that you need to determine is what it is formatted as. The AirPort's print server cannot handle drives formatted in either ExFAT or NTFS. What works best would be HFS+.
If you have already verified that the drive is formatted properly and it is still not recognized by the AirPort Utility, then its power requirements at the USB port may be too high and, possibly, by using a powered USB hub may resolve that.

Using an Older (802.11g) Airport Extreme as bridge with Time Capsule

Several people have inquired about the possibility of having older (802.11g) computers and devices connected through their Time Capsules without disturbing the 802.11n capabilities of their newer equipment.
The latest version of Designing AirPort Networks Using AirPort Utility --
http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf -- explains (pp. 48-49) that one can configure a dual-band (2.4 GHz & 5 GHz) network of this type by setting up the "second device [i.e., the older Airport Extreme] as a bridge." What is lacking is a clear (at least to me) way of configuring the 2.4 GHz Extreme as such a bridge, although the text states that one need only follow instructions "earlier in this chapter" (which begins at p. 14). When I try to do this, the AirPort Extreme shows up as a separate network.
Obviously, I am doing something wrong. Can someone walk me through how to configure the AirPort Extreme as a bridge?
Thanks.

The MAC support people walked me through a solution to my question about using an older (802.11g) AirPort Extreme and a Time Capsule to form a dual network. The solution turns out to be pretty easy but I am posting it in case anyone else has a similar problem.
Here's what was involved:
N-capable equipment: MacBook Pro, IMac, Time Capsule.
B/G-capable equipment: AirPort Extreme (flying saucer 802.11g); Mac G4; older (802.11g) AirPort Express supporting a network printer; IBM ThinkPad running Windows XP (w/service pack 2).
Step 1: Using AirPort Utility (manual setup), I set the Time Capsule to run at 5 GHz (click on "Wireless" then "Radio Mode". Under the same "Wireless" tab, I assigned a 13-digit WPA2 password to this network (more about this latter). If you opt to use the 5GHz frequency, you have the choice of WPA2 or nothing. After saving your settings, exit out of the AirPort Utility; you are done with the Time Capsule.
Step 2: Reset the AirPort Extreme to its default settings by depressing the small reset button while the device is plugged in.
Step 3: I reopened AirPort Utility, accessed the Extreme and clicked manual setup. (You will loose your connection to the Time Capsule at this point, but this is okay.) At the top of the screen that opens in response to clicking "manual setup," click "internet" and set "connection sharing" to "Off (Bridge Mode)" Next click "AirPort" at the very top of the screen: under "Base Station" I named the Extreme as "G network" and set up a network password. Under "Wireless" I next set up a WEP 40 bit password which was identical to the WPA2 password I used for the Time Capsule. Using a WEP password was necessary, because some of the older computers were not WPA2 compatible. I kept the passwords identical simply as a matter of convenience.
Step 4: Connect the AirPort Extreme to the Time Capsule using an Ethernet cable between the WAN port of the Extreme, and one of the three LAN ports on the Time Capsule. There is a small, green LED recessed in the LAN port socket; if it lights up, you are in business.
Step 5: Using a pin, I reset the 802.11g AirPort Express to its default settings, opened AirPort Utility (no need for manual setup for this), named the Express "Printer" and added it to the G network in a conventional manner by following the setup prompts. (If anyone needs help with this, let me know). Exit out of AirPort Utility and reopen it to refresh; all wireless devices (3 in my case) should be visible and lighted green.
Step 6: I set up the MacBook Pro and the IMac to join the 5 GHz Time Capsule network, and everything else to run on the G network. At this point, everything appears to be working. I can, for example, print a document from my MacBook Pro (N-network) to the network printer which on the G-network. (Because the older computers belong to my daughters, I'll never know if file sharing across the networks is a possibility.)
I take no credit for any of this; it was all accomplished through the efforts of very patient MAC support people.
Carl

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Trouble using open NAT Settings with Airport Extreme

Similar Messages

Maybe you are looking for