Trouble viewing events generated by AIM-SSM-10 on SDEE Server

Hi,
Is there a tip that can help me view the xml file produced by the sdee-server in a more convenient fashion. See attached file for more details.
The events are interlaced with html tags.
thanks,
Julie

Julie -
If you don't want to read XML, then you would need a script that will parse it into something that is readable.
I would suggest installing the free IPS Manager Express and pulling events from the sensor you want to see into it.
Then you can browse events in IME or export them in HTML or CSV format.
Each sensor can send events traffic to up to 5 event collectors (although it will cost some processing power on the sensor to maintain additional sessions).
- Bob

Similar Messages

Email Event Generator to read out-box on Exchange server

I know Email Event Generator could read in-box, can it also read out-box on Exchange server? if yes, how could i configure to read outbox?

The iPhone and iPad are unable to read RMS (restricted email) because iOS is not RMS enabled. GigaTrust has an application (http://www.gigatrust.com/ios-devices.shtml) for the iPhone and iPad that will allow RMS protected emails to be viewed and created. The GigaTrust App is available for a free download from the iTunes App Store but there are server side components that must be provided by GigaTrust and require a connection license.

How to determine the event generating component in RESTORE-VIEW phase

Hi,
I have performance issues with my application.
I am using PPR for components within the CoreTable. The table-model for this ADF-CoreTable is coded in java instead of binding it to PageDef table.
The PageDef for the JSF page is heavily loaded with other objects & therefore there a delay in response. I have also found out that maximum time is lost after the RESTORE_VIEW process to before APPLY_REQUEST_ VALUE phase.
Not sure if I am doing it right, but this is what I plan to do.
On determining the event from CoreTable components, I want to bypass the ADF phase by passing null to all ADF Phases
initContext(null)
prepareModel(null)
& before Invoke application
prepareRender(null)
Is there a way to determine the event generating component in the PhaseListener class?
This is a ADF 10g project developed on JDeveloper 10.1.3
Thank you,
Prakash

Just for other readers,
I attempted to create a button to toggle a session scope Flag for test & proceed. However I was still unable to skip the ADF phase.
In a self defined PhaseListener I also tried to remove ADFPhaseListeners before RESTORE_VIEW & reinstate it back in before RENDER_RESPONSE. Except the ADF InitContext() & processValidation() which run immidately after RESTORE_VIEW all other calls to ADF Phases were skipped.
The reasults were not helpful to proceed as I need to entirely skip/bypass the ADF lifecycle to achieve the quick responce.
Thank you

Viewing reports generated by BOXI in local Java application?

Hi,
I am developing a Java client that will act as a front-end to a BOXI R2 server and am having some problems finding a suitable way to display the generated reports in an integrated manner.
I have been using the Web Services component to interact with the server as this seems like the easiest (only) way to run reports on demand, including setting parameters. The ReportViewerBean java applet seems like the only tool available to integrate in a client java application but I have some problems with it. The only way I have been able to get it to display a report is by getting an IReportSource from the page server. It also doesn't let me set parameters programatically and so what my app has to do at the moment is set parameters and retrieve a view using the web service, put the retrieved view back on the server in a temporary location and then retrieve the temporary view on the server using the IReportSourceFactory and feed that to the ReportViewerBean.
This solution is no good and I need some help getting this to work.
I have used an ActiveX CR viewer component in a separate project written in VB6 which allowed me to set parameters, data sources, ect. and run the report. It was very flexible, but unfortunately tied to windows. Is there any similar component available in java that isn't as crippled as the ReportViewerBean and allows me to just view the report I retrieved from the server?
Thanks,
Elliot.

The Crystal Report Viewer looks good, but it seem that it's only available for Windows and Mac platforms. The reason why I am using Java is because the company I am working for has clients using both Windows and Solaris workstations.
The reporting component I am investigating needs to be integrated with our current software solution.
There are a few requirements that restrict this to an integrated solution:
We will be managing cascading and custom dynamic prompts and feeding formatted strings from that to the report parameters
Solution has to be cross platform, including Unix platforms
Interface has to be restricted so that viewing, printing, exporting can be controlled and audited by us.
An interface that I can catch hyperlink events from to trigger extra functionality in the parent program.
Thanks for the suggestion, but are there any other thick client java options for viewing a generated report?

WLI 10g3 JMS Event Generator for Foreign Queues

Hi,
Our requirement is to listen to messages on a remote destination on another weblogic instance (8.1).
One option we are trying is create a foreign JMS Module on local server (10g3) to connect to the remote destination
and use JMS Event Generator to poll for messages on the local Foreign JMS Module and fetch the message and publish this
message into a message channel.
This works fine when I have a local JMS Queue and JMS Event Generator tries to listen to it.
But while trying to use JMS Event Generator against foreign JMS module we are getting stuck with error failed to establish JMS Session :
<Jul 8, 2009 12:26:29 PM IST> <Warning> <EJB> <BEA-010096> <The Message-Driven EJB: foreignGenEventName is unable to connect to the JMS destination or bind to JCA resource adapter: test.mydestination. Connection failed after 64 attempts. The MDB will attempt to reconnect/rebind every 10 seconds. This log message will repeat every 600 seconds until the condition clears.>
<Jul 8, 2009 12:26:29 PM IST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: foreignGenEventName is unable to connect to the JMS destination: test.mydestination. The Error was:
weblogic.jms.common.JMSException: Error creating session
Nested exception: weblogic.jms.common.JMSException: Error creating session
Nested exception: weblogic.jms.common.JMSException: Error creating session
Nested exception: weblogic.messaging.dispatcher.DispatcherException: could not find Server AdminServer
Nested exception: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.messaging.dispatcher.S:AdminServer'. Resolved 'weblogic.messaging.dispatcher'; remaining name 'S:AdminServer'>
Any pointers to a possible issue will eb really helpful.
Thanks,
CA

Varun,
Thanks for your inputs. Regarding the possibility of misconfiguring the ForeignJMSServer , we are able to view the remote destinationname (also the jndi binding name) in the jndi tree of the local server console, which in my opinion translates to a valid configuration.
Can anyone let me know if this issue is fixed in 10.3 as there is a CR raised in the 10.0 version as well for this?
CR332983
CR326377 It was not possible to deploy an MDB while connecting to a foreign JMS provider through WLS foreign server resources configured in a JMS module.
Thanks,
CA
Edited by: user1549937 on Jul 9, 2009 4:26 AM

Event generated by user 'anonymous' at host 'CIS'. Unable to get reference.

Hi,
We have integrated our custom portal webcenter application with UCM through document taskflows.
We are not unable to view the documentts fetched from UCM. Below is the error getting logged in UCM whenever we access the application.
Event generated by user 'anonymous' at host 'CIS'. Unable to get reference. Cannot read folder. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,anonymous,CIS!$!csCollectionUnableToGetReference!csCollectionCannotRead
intradoc.common.ServiceException: !csCollectionUnableToGetReference!csCollectionCannotRead
*ScriptStack COLLECTION_GET_REFERENCE
3:getReferenceMeta,**no captured values**
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at collections.CollectionUserHandler.getReferenceMeta(CollectionUserHandler.java:1765)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:533)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Regards,
Boopathy P

Hi Ryan and Deepak,
Thanks for your suggestions.
The problem was due to the security group assigned to the folders. I had created custom security groups and had assigned it to the folders and contents. But forgot to create the role as groups in weblogic console and assign it to the user. On applying the public security group to folders and contents i was able to rectify this error.
Regards,
Boopathy

Can I use classes and methods for a maintenance view events?

Hello experts,
Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!

Hi viraylab,
1. The architecture provided by maintenance view
   for using EVENTS and our own code inside it -
   It is provided using FORM/PERFORM
   concept only.
2. At this stage,we cannot use classes.
3. However, inside the FORM routine,
   we can write what ever we want.
   We can aswell use any abap code, including
   classes and methods.
(But this classes and methods won't have any
   effect on the EVENT provided by maintenance view)
regards,
amit m.

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

Hi. Having trouble viewing a downloaded file from a site. iPad is telling has not got a app to open file ,but have downloaded so many now and none of them are any help. Tried this on my android phone still nothing. Please can anyone help as slowly ma

HHi having trouble viewing a downloaded file from a site my iPad is telling me I don have a app to open file . And have downloaded loads of apps and still no joy . Have tried this on my android phone to and still nothing. Please can anyone help as slowly going crazy. Thanks tim

What type of file? From what site? What Apps have you downloaded for it?
Perhaps if you provide details of what you are doing we can provide more precise help.

Recently I am having trouble viewing some videos on Yahoo using Safari 5.1.1 on MacBook Pro 10.6.8. I am not finding a solution on internet.

Recently I am having trouble viewing some videos on Yahoo using Safari 5.1.1 on PowerbookPro 10.6.8. I am not finding a solution on internet.

An example link & a clear description of the trouble will help.

I can no longer EDIT nor VIEW events created in iCal...

I have a problem with my iCal in that I can longer edit nor view events.
I can create events, but only the first line of the details for a new event. I am not able to edit or add more info in any way after that (date, time, details, etc.)
I can delete the event though.
When I say I cannot edit nor view events, this problem occurs when double-clicking, when right/CMD-clicking, choosing the relevant command from the menu, or when typing the keyboard shortcut of either CMD-i or CMD-e.
Nothing works. Nothing happens. It's as if I have chosen to do nothing at all.
I have an iPhone which I use to sync events between my Mac and my iPhone, but without being able to properly create an event on my Mac with a chosen time and alarm, etc. iCal on my Mac is almost useless. All my events now have to be created on my iPhone - even when I am sitting right in front of my Mac.
The only use my Mac's iCal is to me now is for pop-up reminders after an event from my iPhone has been synced to my Mac.
The problem I am having with iCal is happening with all the calendars I have set up.
I have no online subscriptions, everything's local.
I have my iPhone set to auto-sync with my Mac for all data.
I am running the latest versions of iCal, the Mac OS (Leopard), the latest iPhone OS, etc.
I tried deleting all my iCal preferences from the ~username/Library/Preferences, but that didn't work.
I tried deleting all my calendars from within iCal in case there was a corrupt calendar, but that didn't work.
I trashed everything I could find that had anything to do with iCal (knowing I could restore from a recent Time-Machine backup), but still nothing worked.
Even when I had an empty iCal to work with, creating a test new-event revealed the same problems of not being able to edit the event after the first line.
I have since restored all my data from the backup I did the other day, so I am back to square one - not that anything I tried before this actually moved me off square one in any way...
Can anyone help me here? It's getting really frustrating having to type all my events out on the iPhone screen, especially when I'm sitting at my computer.

Similar problem here. My Ical refuses to edit or delete events. Viewing is possible, though sometimes the whole screen turns grey. Adding new events from mail is still possible. The task-pane completely disappeared. My local apple technic-centre messed about with disk utility for a bit and than told me to reinstall leopard. I could of course do that, but it seems to me that reinstalling Leopard just to fix iCal events is a bit invasive.
I tried also tried removing everything, installing a new copy of iCal from the leopard-cd, software updates, all to no avail.
At the moment I'm open to all suggestions that do not include a complete leopard reinstall.

JMX API to Create Event Generator

Is there any JMX API available to create JMS event generator?
Thanks

Hi,
As mentioned in the last post go to the event screen by
Environment --> Modifications --> Events.
There you click on new entries and try writing your logic for event 21 i.e. after selecting 21 give some name of your event and write down the logic how you want to do this.
If event number 21 does not work then try 1. One of these two should work.
Hope this helps!!!
Regards,
Lalit

ICal's month view events are spilling out and overlapping making unreadable

iCal's month view events are spilling out of their day boxes and overlapping the events below them making it impossible to look at the month view and discern one's schedule.
What's really odd is it only seems really a problem with the current month. January 2009.
What can I do to remedy this situation?

Okay, I figured out a simple remedy that was probably always intended by Apple. I had been pasting long text paragraphs from emails into the 'Subject' Header. When I paste the long paragraph of information in the "NOTES" area at the bottom of the dialogue box and just put a brief subject line in the header area this fixes the problem.
This might seem like common sense, but Palm Desktop did not require this. I figured this out by trying Entourage. Entourage synching with the iPhone however works through iCal and deleted all my color coded Calendars that I had not backed up. In Palm Desktop I had 15 categories each with a color code.
Now, when I put an address into the "Location" window why can't I tap that on the iPhone Calendar and have the GPS/Googlemap display this location on a map?

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Viewing Events in a List Format

Trying to Organize on Iphoto over 15k Photos that were previously very organized on my PC. On the PC I had my photos in what would be considered folders/albums on I photos. I did the import from my external harddrive and ended up with a lot of random events - many in order many not. Guess I'm used to viewing photos differently and the view in events is not cutting it at all.
Is there a way to view events in a list format - similar to explorer on the PC. What have you found as the best way to organize photos coming from a PC? I had mine by year - example 2009/ then named for each month - 1Jan09NewYears, 2Feb09Valentine's Day etc. on the PC.
I know this is really a personal choice - just looking for ideas and a WAY to View Events in a LIST Format.
Thanks

Is there a way to view events in a list format - similar to explorer on the PC.
No. iPhoto is about the Photos not the Filenames.
What have you found as the best way to organize photos coming from a PC? I had mine by year - example 2009/ then named for each month - 1Jan09NewYears, 2Feb09Valentine's Day etc. on the PC.
You can find all the photos from a specific date very easily:
a: Click on the Magnifying Glass in the Search Box at the bottom of the iPhoto Window. Select Date. Now you can find all the pics from any Year, Month or Day, just by selecting that Year, Month or Day
b: Use a Smart Album: (File -> New Smart Album) based on Date will again, find all the pics from a Date or Date Range.
However, If I might comment: Looking for a List View, Sorting on Date are simply trying to use File Organisation on your Photos. iPhoto has many more ways of doing things, and much more flexible. For instance, while knowing the date a pic was taken makes it really easy to find, what if you don't know the date? Again, the date is easy, but what if you want to have a separate heading for your favourite photos, regardless of date and so on. This is a canned answer I use and it explains my organising system:
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums exensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 25k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
Keywording takes time to set up, there's no doubt about it. I use Keyword Manager as it's much more powerful than the inbuilt system, and adds the possibility of nested keywords. So, for instance, if I add John to a photo it also adds 'Family'. Now I can add many keywords to a pic quickly.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.
Regards
TD

Trouble viewing events generated by AIM-SSM-10 on SDEE Server

Similar Messages

Maybe you are looking for