Trouble with Fixed Pixel Width Portal

I'm working on a portal for the University of Tennessee Martin, and I'm trying to make it a fixed pixel width(800). We tried setting the width for each region, but it would always revert to a percentage. We then tried adding empty regions out to the side. It worked for IE 6, but when we looked at it on Safari and Netscape spaces between regions had been added, things weren't aligned; it was a mess. Could someone tell me if this is possible and how?

Hi Josh,
Take a look at this post:
Re: Fixed Width Region not being Honored
or do a search of this forum on 'pixel'

Similar Messages

How do I deal with missing pixel-widths?

I apologize if this is the wrong forum. I am currently writing a GUI in swing, and I seem to be having some sort of a pixel mismatch problem. There are two verifiable symptoms so far. I have a BufferedImage that is intended to serve as a ribbon across the bottom of a larger page. I've run createGraphics() on it, and I am using that graphics object to draw hashmarks and numbers to the buffer, and thence the screen. The larger page is arranged in SpringLayout. I'm having two problems that I'm pretty sure are connected.
- first is that the numbers that I'm drawing to the BufferedImage keep dropping pixel columns. Zeros will be drawn with the middle column gone, for example (and thus no hole). At smaller resolutions, unbolded, they can look like Cs if the drop hits the wrong spot.
- the bottom ribbon itself goes all the way to the left edge of the page, but the numbering isn't supposed to start until a bit further in - matching up with a spring width from further up the page. The x coord used for drawing and the width spring used for layout are both drawing from the same variable, and thus should be identical, but the number and hashmark are about 4 pixels to the right of where they should be. My guess is that a detailed search would find that there are 4 columns missing between the hashmark and the edge of the screen - which would line up with the approximate frequency seen further in.
I have tried messing with (java-native) fonts and sizes, I have tried swapping back and forth on bold, and I'm pretty sure by now that it's an error somewhere in the pixel lineup. Does anyone have any idea what causes this, or how to fix it?
Thank you for your time.
Fibula

Hi, sounds like an interesting effect, but is rather hard for me to picture from just your description. A small compiling & runnable example demonstrating your problem would really help here. By the way, with "pages", do you mean panels?

RH 10 issue with Fixed Column width

Hi,
Is anybody else having issues with setting a fix width for a column in a table? In RH v.10 the "fixed widths" are not staying "fixed" as I have them manually set.
I've recently been upgraded from Robohelp (html) v.8 to v.10.
In a "Design" view in v.8.0 when I set a column width from the right click menu (AutoFit > Fixed Column Width), the width of the column would be whatever width I'd set it to. Now, in v.10, the width is whatever width the Robohelp window is set to! For example, I have a large monitor and I've got Robohelp open in Full Screen mode, the table (a 1-cell table) gets set to the width of the window rather than the particular width I want to use! I want the cell to be a particular width (much less than my monitor or the open window's width). Can someone please tell me what I am doing wrong?
OS=Windows7.
Browser=IE9
Robohelp is installed locally (it is not being run over a network).
Thanks!
P.S. So far this is the only issue I've had after upgrading from RH v.8 to RH v.10.

Hi William,
In a "Design" view in v.10, the table (which is 1 cell) looks like a big rectangular box. I've turned off the border (cell or table border), so the border appears in gray.
Put mouse focus on this 1-cell table, then grab an edge with the mouse.
Move the table inward to make the column narrower in the view.
Then from the right click menu, choose AutoFit > Fixed Column Width.
Voilá - the width is back to the width of the display window.
Did that make sense to you? Thank you for your help and ideas.
Cheers,
Julia

PDF Export with fixed column widths ignores page break on Analysis item

Hi experts,
we use the column width modification to define fixed column width in a analysis item. On the same Web template we want to export the whole template including the analysis item to PDF format. First of all everything worked properly, but the fixed widths have not been applied to the PDF. According to [SAP Support Note 1336188|https://service.sap.com/sap/support/notes/1336188] and additional explainations from [SDN Thread 1558536|Column Width Modification not working in Print Version; we solved the problem.
Unfortunately another problem arises. Our Analysis item delivers a big number of rows which extent multiple pages. By applying the export fix width parameter all page breaks are ignored, meaning that the analysis item is never shown completely in the PDF. We tried all parameter options of the Export Function without success. It seems that the EXPORT_FIX_WIDTH is just working for analysis items, which fit on one single page by length.
Any ideas how to solve this?
FYI, our XHTML code (Version SAP BW 7.0 SP 19):
<bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_1">
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:MODIFICATION type="CHOICE" value="MOD_SINGLE_MODULE" >
<bi:MOD_SINGLE_MODULE type="COMPOSITE" index="1" >
<bi:ACTIVE value="X" />
<bi:MOD_SELECT type="CHOICE" value="MOD_GENERIC_MODULE" >
<bi:MOD_GENERIC_MODULE type="COMPOSITE" >
<bi:MOD_REFERENCE value="com.sap.ip.bi.rig.ColumnWidth" />
<bi:MOD_PARAMETER_LIST type="ORDEREDLIST" >
 <bi:MOD_PARAMETER type="COMPOSITE" index="1" >
 <bi:MOD_PARAM_NAME value="COLUMN_DEFAULT" />
 <bi:MOD_PARAM_VALUE type="CHOICE" value="INTEGER" >
 <bi:INTEGER value="50" />
 </bi:MOD_PARAM_VALUE>
 </bi:MOD_PARAMETER>
 <bi:MOD_PARAMETER type="COMPOSITE" index="2" >
 <bi:MOD_PARAM_NAME value="EXPORT_FIX_WIDTH" />
 <bi:MOD_PARAM_VALUE type="CHOICE" value="BOOLEAN" >
 <bi:BOOLEAN value="X" />
 </bi:MOD_PARAM_VALUE>
 </bi:MOD_PARAMETER>
</bi:MOD_PARAMETER_LIST>
</bi:MOD_GENERIC_MODULE>
</bi:MOD_SELECT>
</bi:MOD_SINGLE_MODULE>
</bi:MODIFICATION>
</bi:ANALYSIS_ITEM>
Any help and comments will be appreciated. Thank you!
Best regards,
Sebastian

Thank you!
Unfortunately I didn't find any work around.
Thanks,
Federico

Grid with fixed column widths

Hi Folks,
I have a grid in which I want to prevent the user to move the set column widths, because this grid has a separate graphik on top of it which would then cease to correspond with the grid columns.
My question: is there any means of difining a grid with non-resizeble columns?
Thanks & Regards
Fouad
Message was edited by: Fouad Sebbane

Hi
In the below structure ,set bold field as 'X' for columns u wish to keep fixed.
Fieldcat
types: begin of slis_fieldcat_main0,
 row_pos like sy-curow, " output in row
 col_pos like sy-cucol, " position of col
 fieldname type slis_fieldname,
 tabname type slis_tabname,
 currency(5) type c,
 cfieldname type slis_fieldname, " currency
 ctabname type slis_tabname, " and table
 ifieldname type slis_fieldname, " initialcol
 quantity(3) type c,
 qfieldname type slis_fieldname, " qty
 qtabname type slis_tabname, " and table
 round type i," round in write statement
 exponent(3) type c, " exponent for floats
 key(1) type c, " column with key-color
 icon(1) type c, " as icon
 symbol(1) type c, " as symbol
 checkbox(1) type c, " as checkbox
 just(1) type c, " (R)ight (L)eft (C)ent.
 lzero(1) type c, " leading zero
 no_sign(1) type c, " write no-sign
 no_zero(1) type c, " write no-zero
 no_convext(1) type c,
 edit_mask type slis_edit_mask,
 emphasize(4) type c, " emphasize
 fix_column(1) type c, " Spalte fixieren
 do_sum(1) type c, " sum up
 no_out(1) type c, " (O)blig.(X)no out
 tech(1) type c, " technical field
 outputlen like dd03p-outputlen,
 offset type dd03p-outputlen, "offset
 seltext_l like dd03p-scrtext_l, " long key
 seltext_m like dd03p-scrtext_m, " middle
 seltext_s like dd03p-scrtext_s, " short
 ddictxt(1) type c, " (S)hort (M)
 rollname like dd03p-rollname,
 datatype like dd03p-datatype,
 inttype like dd03p-inttype,
 intlen like dd03p-intlen,
 lowercase like dd03p-lowercase,
 end of slis_fieldcat_main0.
Regards,
Raj

Troubles with login to SubOne portal server

Hello evrebody,
at first i'm sorry for my english, it's not good yet :(
I develope forum based on DiscussionProvider and want to have register users on my forum.
My trouble:
I'm trying to login with LoginProvider, and I want that users after login going to another page,
in the file display.template i wrote
<form action="http://mainserver.domain.ru/amserver/UI/Login?&goto=http://virtaulsever.ru/portal/dt?provider=SomeProvider" target="_parent" method=post name="userid_form" enctype="application/x-www-form-urlencoded">But when i trying to login i go to the http://virtaulsever.ru/portal/dt?provider=SomeProvider
but i'm still ANONYMOUS user...
help me pleaase, how can i register and goto another page.
Thanks.

You may specify the module the user have to authenticate with adding in the url parameters module=LDAP for instance.
Another solution is to specify an authentication level in your authentication module like 0 for anonymous and 1 for LDAP or any other module you are using. Then in the login url, you add the parameter autlevel=1 (require to authenticate against a module for which the level is at least 1).

Prob with fixed column widths and word wrapping in viewer

i have a report where each record has a very long paragraph of text in it.
In desktop and plus, the text column is at a fixed width and the text just wraps nicely according to the column width.
But in Viewer, the column widths do not stay fixed, the text does not wrap, and the long text is displayed in a single line that completely stretches the column width off the page and requires a horizontal scroll bar.
is there anyway to fix the column width in viewer, have the text naturally wrap, and prevent the column stretching. All word wrapping settings are on, but seem to have no effect. I can't seem to find any solution to this.
Thanks...

Hi Pritam,
Per my understanding that you can't see the vertical scrollbar of the ReportViewer controls 2012 to scroll for the grid rows, but can see the vertical scrollbar of the web application, you also can't fix the headers while scrolling, right?
I have tested on my local environment and can't reproduce your issue, but you have an alternative way to add some css to the web form's source code to display the vertical scrollbar.
Details information below for your reference:
Please check below properties setting of the reportviewer which control the visibility of the scrollbar:
AsyncRendering="true"
SizeToReportContent="false"
Please check if this problem also occur on other version of IE and other type of browser.
Please check if you have done correct setting of the Fix data to freeze the table header as the step of below:
http://technet.microsoft.com/en-us/library/bb934257(v=sql.100).aspx
If step1 doesn't work, please click the source of webform.aspx and add below CSS to add the vertical scrollbar manually:
#ReportViewer1 {
overflow-y: scroll;
Run the application you will see it display as below:
Similar thread for your reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/f96b3b56-e920-411b-82ea-40467c922e66/reportviewer-control-vertical-scroll-bars
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

Slide show with fixed page width

I made this previously in another side (e.g. thaisailing.com): to have a slide show at 100% page width so that it scales from left to right, independant of the window size. But this time it will not succeed. If I take a rectancle and fill it with one image, it works fine. But not with a slide show element. It always goes back to the side of the inner space only. How can I have a slide show with full page with (not full screen)? Thanks,
Frank

Hi Frank,
Please refer to the following link http://www.musegrid.com/adobe-muse-tutorials/how-to-build-a-responsive-design-images-slide r-in-adobe-muse
Cheers!
Aish

Trouble with a study course portal - buttons are unclickable...

I have a sage accounts e-learning course i am doing - its an online course. When you go to the site you have to log-in - up to this point all works fine...
Once you are logged in you have to then click on a button that says lauch site, this then tries to launch a site in a seperate screen....
Google Chrome; Screen opens, site doesnt it just sits with the timer on the screen
Internet Explorer: does the same as google chrome
Firefox: Opens the screen and the site, lets you work through most of the course but in parts where you have to click on buttons to do things it doesnt let you click on them... when you clikc them nothing happens...
Why is this can anyone help??
Thanks

Problem still works in safemode.
Checked out that link... its not an extensions or theme issue. But went on to look into the plug-in issues... tried disabling them one at at time and problem was always there. By doing this have discovered the programme is using Shockwave flash 10.1.102.64 to work. As when you disable that plug-in it stops working altogether.
So im figuring its a problem with that... ive tried re-installing it but its made no difference.

Fixed width Portal

Team,
We are trying for a fixed width portal in 6.1, by changing the portalContent style in portal60.template and generating the styles, we are able to get the portal with fixed width. But portal is left aligned, how can we make the portal centered.
used "text-align: center" but it didn't help.
.portalContent
width: 950px;
text-align: center;
overflow: auto;
Which style we need to use for this.
Thanks,
Ramesh
Edited by ramesh.totakoori at 01/16/2007 6:15 PM
Edited by ramesh.totakoori at 01/16/2007 6:16 PM

Hi Ramesh,
Try adding "margin: auto" to the .portalContent CSS block and it should work in any correctly-implemented browser (Firefox, Safari, Opera).
Leave the "text-align: center" in there because I think it's needed for IE 6. Not sure if IE 7 addressed this issue or not.
Hope this helps!
Chris Bucchere | bdg | [email protected] | http://www.bdg-online.com

I'm having trouble with something that redirects Google search results when I use Firefox on my PC. It's called the 'going on earth' virus. Do you have a fix that could rectify the vulnerability in your software?

I'm having trouble with a virus or something which affects Google search results when I use Firefox on my PC ...
When I search a topic gives me pages of links as normal, but when I click on a link, the page is hijacked to a site called 'www.goingonearth.com' ...
I've done a separate search and found that other users are affected, but there doesn't seem to be a clear-cut solution ... (Norton, McAfee and Kaspersky don't seem to be able to detect/fix it).
I'd like to continue using the Firefox/Google combination (nb: the hijack virus also affects IE but not Safari) - do you have a patch/fix that could rectify the vulnerability in your software?
thanks

''' "... vulnerability in your software?" ''' 
And it affects IE, too? Ya probably picked up some malware and you blame it on Firefox.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

I am having trouble with my Mac Mini's ethernet connection. Defining a new network interface shows no ethernet adaptor. Reloading SL from DVD repaired. But SL update lost ethernet again. Will Lion Fix?

I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

I down loaded ios7 and now I'm having trouble with my audio on Skype, does anyone knows how to fix it? Please help!

WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...

You can try removing app then reinstalling. If that doesn't work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

I am really in trouble with AP Div-How do I fix it on the web?

Hi,
I am really in trouble with my website. I have added some pictures and text on top of Fireworks Image and have published it on the website.
But the concern is, when I zoom in & zoom out, I can see the previous text on the screen and also the picture and texts I have added using Ap Div tag are scattered moving all to the left when I zoom out. Can someone help me how to fix this in one particular place so that it doesn't move when I zoom in or zoom out!!! I am using Adobe Dreamweaver CS3, if this will help.
Appreciate your sincere help on this.
Thanks in advance.

Frankly, there's a lot that is wrong with that page:
1. Most of your content is in the images - this means that you will get very poor search engine ranking
2. Your extensive use of absolute positioning for layout - this means that when you enlarge the text size in the browser, you will have overflow problems on the page (for example, the terrible problems at the bottom of the page)
3. You have used tables for layout - this is because of your use of Fireworks to create the HTML
Each of these problems is solvable but none of them are solvable easily without a redesign of the page. A web page should be built from the top down, stacking content containers (i.e., <div>, <section>, <article>, <aside>, etc.) vertically or floating them horizontally or both. These containers would be loaded with the text content of the page, and images would be used only for cosmetic appearance. Using CSS to style/locate the content will allow you to completely move away from tables for layout. Most typical pages can be created without the use of absolute positioning which should be used only for special purposes, not for layout of the page elements.

Trouble with Fixed Pixel Width Portal

Similar Messages

Maybe you are looking for