Trouble with Server 9.2 Avitek Tutorial 10

I'm running through the WebLogic Server 9.2 Tutorial,
"Avitek Medical Records Development Tutorials".
In Tutorial 10, "Using EJBGen to Generate EJB Deployment
Descriptors", Step 4, "Use the EJBGen utility to regenerate the
deployment descriptor and EJB files.", Sub-step 9, I have
trouble. It says
. . enter the commands to execute the build script:
prompt> ant -f ejbgen.xml
When I do this the build fails:
C:\medrec_tutorial\src\physicianEar>ant -f ejbgen.xml
Buildfile: ejbgen.xml
BUILD FAILED
C:\medrec_tutorial\src\physicianEar\ejbgen.xml:3: taskdef
class com.bea.wls.ejbgen.ant.EJBGenAntTask cannot be
found
Total time: 0 seconds
Trying the build-file packaged with the tutorial doesn't work
any better:
C:\medrec_tutorial\src\physicianEar>ant -f
ejbgen_tutorial.xml
Buildfile: ejbgen_tutorial.xml
BUILD FAILED
C:\medrec_tutorial\src\physicianEar\ejbgen_tutorial.xml:4:
taskdef class com.bea.wls.ejbgen.ant.EJBGenAntTask
cannot be found
Total time: 0 seconds
Can anybody clue me in on what I'm doing wrong?

After the initial install I needed to edit the port being used by opmn because the process would not start.
As I started retracing my steps I reverted this change and the process was able to start. Apparently, whatever was
using the port was not longer running.
Overall, lots of pre-reqs that were required were not available. This included a gcc linux patch, XML DB, Oracle Text, etc.
After these were all in place the install finally resulted in a working Apex environment. Wasn't easy, but was able to work through
the issues.

Similar Messages

Trouble with server protected pages

I have an Admin folder that is protected via IIS (no anonymous access), as well as SSL connection on pages within that folder... and Safari 3 will no load the pages correctly on the first attempt. EVERY single page I go to, I have to hit the refresh button for it to display. This was NOT happening in Safari 2, and it doesn't happen in any other browser.
Can someone tell me why this is happening and how I can fix it?
Also, is there a way to make sure Safari / Keychain Access doesn't have the username/password server login used to access pages in this folder saved... i.e. force login every time and/or remove old login information. Keep in mind, these are form logins... these are server controlled logins.

I should mention I've tried the following:
Empty cache
Delete History
Remove all cookies
Turn off all auto-fill options
It still automatically loads the page without me entering anything.... and it still requires me to refresh the page if I attempt to view any page that's protected in that folder.

Trouble with applet tutorial about servers

I downloaded the sources of this (http://java.sun.com/docs/books/tutorial/deployment/applet/clientExample.html) example and am trying to make them work. However I'm having trouble with the server program.It compiles fine but when I run it I get NullPointerException in QuoteServerThread class on this line:
packet = new DatagramPacket(buf, 256);buf is a byte array and it's set to null.
I don't have any experience with networking in java so if the problem is something really simple you'll know why I didn't find it.
Oh, and the code of the thread is here http://java.sun.com/docs/books/tutorial/deployment/applet/examples/QuoteServerThread.java

Replace
byte[] buf = null;with
byte[] buf = new byte[ 256 ];Other problems may happen if this sample was not tested properly.
The problem is that the DatagramPacket requires you to supply a non-null buffer, as per:
DatagramPacket
public DatagramPacket(byte[] buf, int length)
Constructs a DatagramPacket for receiving packets of length length.
The length argument must be less than or equal to buf.length.
Parameters:
buf - buffer for holding the incoming datagram.
length - the number of bytes to read.
Edited by: baftos on Jul 18, 2008 3:38 PM

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

I am an iPad novice and whilst I have managed to set up my personal email, I have having trouble with my business email in that I can receive emails, but am unable to send and the message says 'this email address has been rejected by server'

I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'

That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.

Trouble with permission to open current PDF from one user to another user. what is the cure. i am running nthe current Server and updated Os 10.9.2

Trouble with permission to open current PDF from one user to another What is the cure ? I'm running the latest Server and OS 10.9.2.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

Can't create a new account at ePrintCenter - trouble with the server for 2 weeks.

Hi. I'm trying to create an account at ePrintCenter and all the time getting mesage 'Возникла проблема с сервером. Проблема будет устранена в ближайшее время. Приносим извинения за неудобства.' (A trouble with the server, wait, bla bla bla). When will it be fixed?

For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee

I'm having trouble with Snow Leopard server disconnecting.

I'm having trouble with Snow Leopard server disconnecting. Recently upgraded my laptops to latest MacBook Pro OSX Lion, but everything has been fine since December until now. I did just add a 2TB Drive to the set-up (OWC Mercury Elite AL-Pro) in a Daisy chain of 2 other 2TB drives and a 3TB Drive that had been working perfectly up until now. I was able to use it yesterday, but now it has gone haywire and I lose connections while working on files or saving files. Have to restart server and it works for a while, but then drops off. Could Server be corrupt?

Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe

TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks!

Trouble with opening/creating Server Model Diagrams

I created server model diagrams by drag-and-dropping specific tables from the Server Model Navigator. Is it supposed to take a LONG time
for this step (e.g., 3 whole minutes for one table) or should it be basically "immediate"? They eventually made it, but seemed unreasonably long!
I saved the diagrams, quit, and come back to the repository, see the diagram names, click on a diagram, verify the elements inside, everything
looks good -- until I try to open the diagram, it (Design Editor) locks up every time!!
Does anybody know why I'm having either one of the above problems? Is there any setting I need to configure?
(By the way, I'm using Designer 6i with an Oracle 8.1.7 database.)
Thanks in advance.
Brenda

Could be your memory. Designer takes alot to run, as you may know. Minimum should be 256mb. Close all apps and try to open
the diagram again. I have had lots of trouble with my designer locking up!

HT5622 When I try to log in to game center in my iPhone 4S no SIM card but it has wifi. It says something like trouble communicating with server. Please reply .

I can't fix this wired problem help can't connect to server when I try to sign in with my Apple ID

Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

Why cant download the cc trial? When I try the site said is having trouble with the server

Why cant download the cc trial? When I try the site said is having trouble with the server

Some links that may help
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

10.5 Server : Standard Installation : Newbie Tutorial / Setup Walk-Through

Hello all,
I recently setup OS X Server 10.5 for a client after doing it many times at my home. I could not have possibly done it without the help of this discussion board so thanks to everyone asking and answering questions!
To help other server newbies easily setup Server 10.5 (as apple claims), I'm hoping to make a basic installation procedure that will always work for newbies. Right now it's not exactly "detailed" - just the basic steps to ensure success.
Below is my setup procedure that has worked well for me (especially at my house). It's for a Standard installation; and we'll be setting up the server to include Mail (local only), iChat, VPN, File Sharing, iCal, Web Server/Wiki, Apple Remote Desktop access, and Time Machine (may not work well).
Please let me know if I'm missing something that will help ensure this setup works as perfectly as possible on any system.
+to help make sure this works, try using all the names i've used below (besides perhaps user names & passwords); like "server.house"+
*1) Setup Router*
• ensure router is properly connected to modem/internet
• router lan address = 10.0.2.1
• subnet mask = 255.255.255.0
• dhcp on
• dhcp server starts at = 10.0.2.9
• dhcp server ends at = 10.0.2.99
• dns server (opendns servers) = 208.67.222.222, 208.67.220.220 (not a completely necessary step, but may help ensure it works)
• port forward to 10.0.2.2 = vpn (udp: 500, 4500; udp/tcp: 50)
• port forward to 10.0.2.2 = ard (tcp: 5900, 5988; udp/tcp: 3283)
*2) Install/Setup Server*
• startup server computer with installation cd and start installation process
• choose "Standard Installation"
• setup administrator account with the following settings:
user name: Administrator
short name: admin
password: admin
• setup network settings (choose manual configuration):
manual ip address = 10.0.2.2
subnet mask = 255.255.255.0
router = 10.0.2.1
dns server = 10.0.2.2
search domain = house
• primary dns server = server.house
• server name = server
+choose all the services and let installation complete; wait until desktop loads+
Verify things are initially okay:
• Open safari, and type "server.house" in the address bar (ensure wiki appears)
Good, now:
• Download latest 10.5 server combo update, install, restart.
• Run software update until all updates are installed (may require several restarts)
• Setup a dyndns account for your server, install dyndns software (make sure it's updating via web and the ip address doesn't start with 10.x)
*3) Setup Server Preferences*
• open server preferences
• go to file sharing: turn on file sharing
• go to vpn: turn on vpn
shared secret = somethingsecretive
ip address range = 10.0.2.101 - 10.0.2.199
• go to users
• make new user(s) with all options enabled
+you should now have all services in server preferences enabled (if not, enable them) and user names setup; for good measure, restart the computer again+
*4) Setup Client Computers*
+make sure client computers have all software updates installed before proceeding+
• Open system preferences: network
• Make a new location called "Server"
• Set TCP/IP to DHCP
• DNS Server = 10.0.2.2
• Search domain = house
• Click apply
It's probably a good time to double check that the internet works - open Safari and google something. Good, it works.
There are two ways to setup the client computers to connect to the server with basically no manual configuration needed:
First way:
Go to system preferences: accounts: select user name to associate with server: select "server account" (if available): enter appropriate info for user on server: wait a bit: restart computer
or (if "server account" isn't available):
Second way:
Open finder: applications: utilities: directory utility. once opened, it should automatically find your server. if it doesn't, click the lock, click "plus sign", type = "open directory", server name = server.house, click ok
• enter appropriate info to connect to server and ensure it's set to automatically setup all services, once finished - restart.
*5) If the automatic setup didn't work, here's how to manually setup the client workstations:*
Safari
• Open Safari and type "server.house" in the address bar, enter user/pass, make sure it connects to wiki.
iChat
• add new jabber account
• jabber id = [email protected]
• server = server.house
• port = 5222
• kerbos = on (you can leave off if you want)
You can test by connecting to your Jabber account
VPN
• open Network in system preferences
• click lock
• click "plus sign"
• interface = VPN
• vpn type = L2TP over IPSec
• service name = server
• server address = your dyndns address
• click advanced
• dns server = 10.0.2.2
• search domain = house
• click ok
• click authentication
• enter user's server password
• enter "somethingsecretive" in "shared secret"
• click ok - click apply
You can test by clicking "connect" - after verified, disconnect.
_File sharing_
• Open finder: click "Server" under "Shared"
• If it connects as guest, click "connect as"
• enter your server username/password
Drag a file to and from a folder to make sure file sharing works
Mail
• Add new mail account (imap)
• Incoming mail server = server.house
• Outgoing mail server = server.house
• Outgoing authentication = kerberos 5 (or password)
• user name = [email protected]
• enter password
Check to make sure you get the server welcome e-mail and that you can send email to other users on the server.
*Time Machine* (very problematic at this time)
• Open Time Machine in System Preferences
• Click "options"
• Eliminate as many folders as possible to keep backup times shorter; click done
• Click "change disk"
• Select "Server" disk; click "use for backup"
** I highly recommend using local SuperDuper! backups and/or Retrospect for networked backups to the server. Other options include the dot mac Backup application or online backups (google it).
*If you have PCs on your network that you want to be able to connect to the server for file sharing*
• Open Windows Explorer (my computer)
• Click tools: map network drive
• Enter "\\server\public" (or if you setup a user account on the server for the pc user(s) i think you can use "\\server\pcusername" - and follow the next two steps)
-Click "connect using different user name"
-Enter pc user account username/password
• save settings
Check to make sure the drive shows up and you can move files to/from server
Helpful info for newbies setting up server 10.5:
• Apple's Server Resources page with all manuals
• Probably the most helpful newbie setup discussion
• Probably the most helpful newbie setup discussion #2
• Discussion about DNS
• "Time Machine is a dog... discussion"
• Manage Central Address Book discussion
• Leopard to Windows Files Sharing Issues discussion
• Lynda's 10.5 Server Training Videos (this does cost money and I haven't personally used it, but it looks very helpful)
I hope that's a good start for people, but I'm sure some setting(s) can be tweaked or I missed something that could make this process go even more smoothly. Lets make this the definitive newbie standard installation setup tutorial.
-Brian
corewerkz

Hi gikku,
Good idea! I forgot about the web server port forwarding, that will allow the wiki to be seen over the internet.
One question: what does adding the dyndns address to "Server Admin > web > settings > sites" actually do? I'm not too knowledgeable about Server Admin.
Thanks,
Brian
corewerkz

Trouble with DNS set up

Hello !
I've got a real trouble with my dns configuration... and i can't understand! so, i need some help....
well, qutie newbie in mac os server, i run in on a G4, and i had not noticed any trouble until i've decided to run open directory as a master with LDAP, wanting to have a kerberos protection for the users.
Kerberos doesn't want to play with me !
I've been in console mode to have a look, and, actually i've seen this :
"Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no name available via DNS for 192.168.0.109
Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no reverse DNS entry for server, various services may not function properly"
Ok... my DNS has a trouble... but i don't know how to fix it ! Is there anybody in this world who can help me?
I don't want to have a real DNS for my little server... but i understand that my config is not good. I can understand that having a caching DNS can improve the quality of my config, and, in other hand that it is necessary for having the services of OSX server in an effeciant way, but i don't know the way and the parameters i've to put in my config to fix it.
Now, just some words on my config...
First, i've got an adress provided by my FAI (the frenchy workd for ISP, i think) is "193.252.209.135". This adress is set on a d-link modem router via PPOE. The DNS of my provider (wanadoo.fr) are 80.10.246.1 and 80.10.246.132.
After this there is my G4 With mac osX server.
• en0, the "extenal gate" and the internal ethernet on the computer is plug on the modem with the adress "192.168.0.109". the router is set on "192.168.0.1". the dns are 80.10.246.1 and 80.10.246.132.
• en1, the "internal gate" for the network, an PCI card in the computer, has the parameters : adress "192.168.3.1", subnet "255.255.255.0", router "192.168.3.1". no dns records. (no VPN service for the moment). After this, i've a switch for the macs behind the server. (without any link agregation)
All those parameters have been set by the gateaway assistant.
And now the parameters inside the admin server :
DHCP : en1 - adress from 192.168.3.2 to 192.168.3.254, name 192.168.3. no static card. Router 192.168.3.1. No name for domaine by defaut, name servers 80.10.246.1 and 80.10.246.132 No LDAP, no WINS.
DNS : No zone transfert, recursivity is ON. No zone records.
NAT : set on full, Transfert and Network Address Translation.
When i've been on the terminal, i had those information:
"wakan:~ st$ sudo changeip -checkhostname
Password:
Primary address = 192.168.0.109
Current HostName = wakan.local
The DNS hostname is not available, please repair DNS and re-run this tool."
All my "main" services are working fine (AFP, Firewall, DHCP, DNS, Update) Open Directory is running without Kerberos. By the way, all the macs after the G4server can have a corect access to internet, and share information via LDAP of Open Directory, but i've to say that, a couple of days later, a friend of mine, who has a PC computer, can't have a DHCP dynamic address when he plug on my little network. I think that it is an other trouble, and i've decided to have e look to this later... but if someone knows how to resolve it...
So here begins the nightmare for me... so if anybody can help me... i realy need some help to fix this mystery!!!
Special thanks!

As the router modem is already doing NAT why use NAT in the server?
If you want to use OpenDirectory and other services you should/need to set up the DNS correctly using the server's private IP (and others in the same range the server is setup with). The domainname used internally can be different than your public one.
And then use the server as the only DNS for you LAN clients and the server itself. Forwarders (your ISP DNSes) in /etc/named.conf usually speeds up lookups of external addresses (also turning off IPv6 can help that too).

Troubles with the creation of New Custom Adapter for NW 7.1

Hi guys !!!
I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
[Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
note : 1004000
I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed:           0
Deployed with warnings:           1
Failed deployments:                0
~~~~~~~~~~~~~~~~~~~
1. File:C:Users
maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
     Name:PI71_AF_myFirstCustomAdapter_ver_2.0
     Vendor:sap.com
     Location:SAP AG
     Version:7.1007.20090310105326.0000
     Deploy status:Warning
     Version:NEW
     Description:
          1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
     1.An AS Java service, which is providing a container, is stopped or not deployed.
     2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
     at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
     at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
     at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
     at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Result
Status:Warning
I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
Antonello

Hi,
the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
     at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
     at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
     ... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
     at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
     at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
     at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
     ... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
     1.An AS Java service, which is providing a container, is stopped or not deployed.
     2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
     at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
     at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
     at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
     at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
     at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
     at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
     at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
     at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
     at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
     at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

Trouble with Server 9.2 Avitek Tutorial 10

Similar Messages

Maybe you are looking for