Troubleshooting in OSB

Hi All,
I have a doubt in OSB. In BPEL if any project is deployed and we test that BPEL process instance will get created in em console for the process.If error occurs at any stage of the BPEL process we can see where the error has occured and what error has occured in that BPEL process by seeing its corresponding instance. Like that is it possible to see the flow trace for an OSB project? Because in OSB instance is not getting created when any application calls the OSB project or when the OSB project is tested from sb console.
Suppose if a service calls the OSB project and OSB is calling the endsystem[client service --> OSB --> end system], suppose if any occurs in OSB side or end system is down how can we troubleshoot this error? because instance will not get created in sb console. How can we troubleshoot in that case?
My opinion is when desinging the business logic we can put alerts, or log activities. if we put alert activity we can see the error in Alert destination in sbconsole. if we put log activity means where we can see the error message. Please correct me if i am wrong.
can anyone help me in this issue?
Thanks in advance,
Arun.

As OSB is stateless, concept of instance is not applicable.
One of the ways is to use alerts, that you seem to have already tried. And if you use the log action, you should see the statements in the server logs.
Choose an appropriate log level for the different statements and ensure that the weblogic logging level is also set appropriately.
For ex. if the weblogic logging is set to ERROR and you try to have a log action at DEBUG level, you cannot see the logs.
if the weblogi logging is set to DEBUG and if you use log action with levels Debug,Info, Warning, Error - all of them will be visible.
If this is only for your debugging the scenarios, you can also enable tracing (in Operation Settings) on the proxy/business service to capture the complete trace of the execution. But ensure this setting is turned off in PROD environments as this hampers performance.
Thanks,
Patrick

Similar Messages

Two listener for the same queue - different extraction rule

Hi all.
I've the following situation that I'm trying to troubleshoot.
OSB communicates with another system using JMS Queues.
One queue for teh request, one for the response.
Depending on the kind of service, the request is published on the request using a dynamical routing to a Business Service. Depending on the cases, this business service could be:
1. Just insertion on the queue (no response required)
2. "Queue Manager" - Insertion and wait for response (response required, JMS Correlation ID as correlation pattern)
About the extraction from the response queue, when the messages are published from the "Queue Manager", then they must be extracted from the same resource based on the Correlation ID.
Otherwise, all the messages published in other way (not the "Queue Manager" but the option #1), a different resource should extract them from the response queue (a proxy service with protocol JMS).
What happens at runtime is that the messages published from the "Queue Manager" are extracted from the other resource.
How can I solve this?
Do I need to use two separate queues or there is a way to configure two different listener on the queue, one based on the JMS Correlation ID and the other one that extracts all the other requests?
Thanks in advance to anyone that will help.

Unfortunately, I've already evaluate the message selector option, but in the following case:
BS1 (Request Only)----->JMSQRequest ----->Your Logic ----->JMS Reponse--->JMS Proxy service with Message selector
The JMS Proxy with message selector should know the value that is the key for the extraction. In this case we have not this infornation since when we run this scenario there is an external system that extracts the request and provides the response... and in the middle we lost the informations (e.g. if we use a key ID, the Proxy with message selector doesn't knwo which value is has to search for in the ID).
For the moment I think that the best solution could be to have two separate queues, but I'm trying to figure out if there is any other option.

SFTP Issue in OSB invocation resulted in an error: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,ip

I created a Proxy Service to do pull file and push it to sftp server
known_hosts file is present on OSB server.
It has abcserverhostname,IP ssh-rsa AA................. ==
I created a business service to do SFTP push to sftp server (remote) - Its not working.
<Error> <SFTPTransport> <BEA-381826> <Key Not Found for host hostname,10.124....>
com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124.....
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
My Business Service
End Point URI : sftp://sftpserverhostname:22/directorypath
Authetication Mode : user name, password.I have created a Service Account for sftpserver and imported in Business Service.
Do I need to give anything else in known_hosts file ?
and hostname can be any random name?
<Dec 11, 2013 1:45:37 PM GMT+08:00> <Error> <SFTPTransport> <BEA-381801> <Error occured for endpoint com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124....
com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:161)
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:111)
at sun.reflect.GeneratedMethodAccessor566.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
Caused By: com.maverick.ssh.SshException: ssh-dss Key Not Found for host eirnode2,10.124.10.16
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.A(Unknown Source)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.verifyHost(Unknown Source)
at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
Truncated. see log file for complete stacktrace

BEA-381826 suggest that there is any issue with your public key in known_host file, can you cross verify it again. Also can you check if known_host file has appropriate permissions and I am assuming it is in /OSB_DOMAIN/osb/transports/sftp folder.
Hostname,IP algorithm publickey are the hostname, ip, and public key of SFTP server.
As per troubleshooting guidelines
The Key not found for IP, host error message indicates that the known_hosts file does not contain an entry that corresponds to the specified IP-host combination. If the entry exists, then try with another algorithm key; for example, if the earlier attempt was with an RSA key, try again with a DSA key.
Cheers,
Sahil

Java client for OSB proxy with JMS Transport

Hi,
I am trying to call OSB proxy with JMS Transport. I am generating the client through ant task clientgen and following this article
http://www.oracle.com/technetwork/articles/murphy-soa-jms-092653.html
The osb proxy is req-response and is simply routing to BS which return a string value.
When I run my client, it get stuck and does not return at all. Has any one trying java client in such scenario?
What I may be missing?
Below is snipped of client code:
String url = "http://localhost:7021/sbresource?PROXY/MySample/MyJMSProxyService";
CreditLoanApprovalServiceSoapBindingQSService service = new CreditLoanApprovalServiceSoapBindingQSService_Impl(url);
MyPortType port = service.getCreditLoanApprovalServiceSoapBindingQSPort();
LoanStruct in = new LoanStruct(); //populated the data structure
String loanResult = port.processLoanApp(in); // Stuck here without any error
System.out.println("LoanResult--> " + loanResult);
Thx
/Ashwani

http://localhost:7021/sbresource?PROXY/MySample/MyJMSProxyService is the WSDL URL of the proxy.
Transport is is picked by the client from wsdl.
As far as the documentation of client generation is there, there is no change.
But meanwhile I have started working on sending the message directly to queue. JMSProxy is getting called. May be I will first run the proxy this way and then try troubleshooting the java client.
Regards
Ashwani

WLS 10.3.3 (OSB) Exception faced : General runtime error: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.

WLS 10.3.3 not supporting SHA2 cert at provider end . (wild card certificate cannot be imported to trusted certs)
During integration from OSB 11g we face below exception :
General runtime error: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received
Regards,
Anitha

Enable -Dssl.debug=true java option and capture the logs.
You might find this userful
http://weblogic-wonders.com/weblogic/2010/01/28/troubleshooting-ssl-issues/

Getting error in OSB :: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received..

Hi There,
am getting error when invoking a webservice from OSB .
"The invocation resulted in an error: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received..".
certs were loaded to the trust store and could see certificates in Trust store.
surprisingly, same webservice works from SOA BPEL and even from soapUI.
I even made Host Name verification to NONE... none of those helped.
your suggestions are very much appreciated.
Thanks,
Karthik.

Enable -Dssl.debug=true java option and capture the logs.
You might find this userful
http://weblogic-wonders.com/weblogic/2010/01/28/troubleshooting-ssl-issues/

OSB sbconsole responding slow.

Hi,
We have OSB 11.1.1.5 installed on Weblogic server 10.3.5 running on 64 bit Linux platform. The OSB installation is a vanilla one with no changes to the default installation, except that we have increased the JVM heap size of osb_server from 512MB to 1024MB. There is around 8GB of RAM available in the server.
Issue : sbconsole is too slow in responding, each click on any link in the sbconsole takes around 10mins. It also looks like the services deployed in the server are working fine as we get service responses in a second or even quicker.
Is there anything that has to be done to make the sbconsole respond quicker or where should i start troubleshooting.
Any pointers in this regard would he helpful.
Thanks,
Vijay.

Hi Anuj,
Thanks for checking on this thread.
We have 2048MB allocated to JVM of osb_server and 2048GB to JVM of AdminServer. We have around 30 OSB projects deployed in the server. We are opening the console from remote machine. Im able to login to the console with a wait of around 2-3minutes, but on clicking the Project Explorer link, we have to wait infinitely.
Below is excerpt log from AdminServer.log. Any clue on this would be helpful.
####<Apr 12, 2012 1:06:40 AM MDT> <Error> <WebLogicServer> <osbhost1> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <7f1db88dd9a30289:1149bab9:136a3fa7406:-8000-0000000000001cb2> <1334214400210> <WL-000337> <[STUCK] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "715" seconds working on the request "weblogic.servlet.internal.ServletRequestImpl@1dfb2a14[
GET /sbconsole/sbconsole.portal?_nfpb=true&_pageLabel=WLI_DashboardPage&selmodule=operations&selsubmodule=dashboard HTTP/1.1
Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, */*
Referer: http://osbhost1:7001/sbconsole/jsp/login/login_form.jsp?
Accept-Language: en-us
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; InfoPath.3; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC LM 8)
Accept-Encoding: gzip, deflate
Connection: Keep-Alive
Cache-Control: no-cache
Cookie: ADMINCONSOLESESSION=BXgyPG8TSDRXqhWRx1kYylgpcZSkQyNQPQb4LFbQTl2WQhw1hCzL!-338513878
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-101 "[STUCK] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, suspended, waiting, priority=1, DAEMON> {
-- Waiting for notification on: weblogic.rjvm.ResponseImpl@1ee662dc[fat lock]
java.lang.Object.wait(Object.java:???)
weblogic.rjvm.ResponseImpl.waitForData(ResponseImpl.java:80)
Thanks,
Vijay.

OSB 11.1.1.7 installer crashes on Windows XP

Hello everyone,
I'm trying to reinstall OSB 11.1.1.7 but the installer crashes with no errors. I've uninstalled everything possible related with Oracle in the PC, and reinstalled weblogic and oepe with success.
The OSB installer's path is C:\osb, the temp directory C:\Temp, and the jdk directory is C:\Development\Java6.
I've run the installer through cmd: setup.exe -jreLoc C:\Development\Java6 with no luck. I've even tried from C:\osb\Disk1\install\win32\setup.exe, but it crashed. Never shows up the installer's window.
The log doesn't seem to have any errors:
Using paramFile: C:\osb\Disk1\install\win32\oraparam.ini
Checking if CPU speed is above 300 MHz.   Actual 2659 MHz    Passed
Checking swap space: must be greater than 512 MB.   Actual 4092 MB    Passed
Checking monitor: must be configured to display at least 256 colors.    Actual 4294967296    Passed
The commandline for unzip:
C:\osb\Disk1\install\win32\unzip -qqqo ..\..\stage\Components\oracle.swd.oui\11.1.0.9.0\1\DataFiles/"*.jar" -d "C:\Temp\OraInstall2013-11-27_10-39-42AM"
The commandline for unzip:
C:\osb\Disk1\install\win32\unzip -qqqo ..\..\stage\Components\oracle.swd.oui.core\11.1.0.9.0\1\DataFiles/"*.jar" -d "C:\Temp\OraInstall2013-11-27_10-39-42AM"
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 354.
Any ideas about what is happening?

Hello amordetrance,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1421
Best of luck,
Mario

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
        java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
        java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

OSB file logging settings configuration

Dear Experts,
I need to know if it is possible to log on file all messages of error (i.e $fault variable) during a flow execution without using in the flow neither logs neither report. Is it possible ? If it is, which the correct WLS settings configuration ?
Regards,
Mike
Edited by: Mike.Di on 3-dic-2009 5.55
Edited by: Mike.Di on 3-dic-2009 5.57

I can only think of one solution: using the debugging/tracing facilities of OSB. You could enable execution tracing for a particular proxy service, or you could enable debugging of pipelines in the alsbdebug.xml file in your domain's home. For this WLS's log should have a severity level of debug. Of course this would mean you'd have a lot more messages in the log files, not just the errors. I would not recommend this for a production environment.
Why can't you use the Log action that's specially designed for sending messages to WLS's log file?

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while calling a bpel service from OSB

Hi
I try to call a BPEL service from OSB 10.3 and use these bpel url's
ormi://<hostname>:<rmi port>/<domain name>/<process name>
opmn://<hostname>:<opmn port>/<oc4j instance name>/<domain name>/<process name>
and I create a static service account with ocj4admin
when I try to run the BusinessService then I got this error
WARNING: Exception returned by remote server: {0}
com.evermind.server.rmi.RMIConnectionException: Disconnected: javax.xml.namespace.QName; local class incompatible: stream classdesc serialVersionUID = -91204487
54896609940, local class serialVersionUID = -916876369326528164
at com.evermind.server.rmi.RmiCallQueue.notifyQueuedThreads(RmiCallQueue.java:70)
at com.evermind.server.rmi.RMIClientConnection.notifyQueuedThreads(RMIClientConnection.java:208)
at com.evermind.server.rmi.RMIClientConnection.resetState(RMIClientConnection.java:147)
at com.evermind.server.rmi.RMIConnection.receiveDisconnect(RMIConnection.java:236)
at com.evermind.server.rmi.RMIClientConnection.receiveDisconnect(RMIClientConnection.java:176)
at com.evermind.server.rmi.RMIConnection.handleOrmiCommand(RMIConnection.java:208)
Please help me out.I am using SOA Server 10.1.3.4 with jdk 1.4.
Regards
Ayush
Edited by: Ayush fujitsu on Apr 6, 2010 3:36 AM

Hi i have followed the following steps which is specified in this thread
You need to follow below steps...
add a java parameter to the OSB server. Go to domains\osb_domain\bin folder and edit the setDomainEnv file and add this line to this file. set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME% -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0
Step 2 is to replace the bpel jars in the bpel transport ear. Go folder osb_10.3\lib\transports and open bpel10gtransport.ear and replace the following jar files orabpel.jar, orabpel-common.jar , xmlparserv2.jar and oc4jclient.jar with the ones you can find in the soa suite 10.1.3 home.
But still i am getting the error.
I am using WLS (10.0).Is it compatible with bpel-10g protocol, because i have already called a sync BPEL process with http protocol and it worked?This thread talks about WLS(9.2)
Regards
Ayush

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sail

Hello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

IPod not recognized by Windows or iTunes, troubleshooting didn't help.

I have an 80 gig iPod classic. When I plug it into my computer it is not recognized by either Windows or iTunes. However, it does charge while connected. I have gone through every troubleshooting tip on the Apple website and nothing has worked. The only thing I was unable to try was restoring it because it needs to be recognized in iTunes in order to do so. Any suggestions?

I had the same problem.......
OK, after 8 hours.. It worked..... I was installling and uninstalling only itunes 9 but not all the apple components in my computer....... uninstall itunes 9 and all its components: Apple Mobile Device Support, Apple Software Update, Bonjour, iPod for Windows, iTunes, QuickTime.
Under the folder c:\Program Files delete the following folders:
Apple Software Update, Bonjour, iPod, iTunes, QuickTime
Search for any hidden folders named "Apple Computer" or "Apple" These may appear under AppData or Local/AppData, Delete these folders.
Restart your Windows machine and install itunes 9 and quicktime again..... good luck!!!!!

Troubleshooting in OSB

Similar Messages

Maybe you are looking for