Trusted RFC User : Current User or Fixed?

Hello All,
We will be implementing Service Desk and Charm.
My question is that while creating the Trusted RFCs initially, which user-id option we should give?
Should it be the Current User? Or a fixed Dialog User-id which exists?
Why I am asking is that I am not quite sure in which all cases this Trusted RFC is used. If it is used in critical operations we should not give a fixed user-id which has plenty of access. It should be Current User.
IF it is a fixed User-Id - what all authorizations it should have in SolMan and in the Satellite Systems?
Thanks!

Hi,
THe user you need can be a current user, however this user needs to be setup in both systems; for a better sypnosis on the setup scenario for trusting RFCs please kindly refer to this note
128447 Trusted/trusting systems
more information are also available in
http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm
Also please remember to regenerate the RFC in SMSY, but before that, you have to
DELETE the following in BOTH solman and satellite system
- the relevant RFCs
- the relevant users created by SMSY when generating the RFCs
- the respective SID in both txn SMT1 and SMT2 (In Solman, you have to
delete the satellite's SID. In satellite system, vice versa)
After you have deleted both, please regenerate the RFCs in SMSY and it
should recreate everything for you again that you have deleted. Please
note that the user you use to generate the RFCs have to exist in both
systems, also the authorization object S_RFCACL have to be included in
user for BOTH system (which is not included in SAP_ALL, SAP_NEW).
Hope this helps.
Cheers
SH

Similar Messages

BPMON Alerts Detail Info - how to switch to use TRUSTED RFC ?

Hello Experts,
we have configured BPMON for our customer and it works fine, alerts are flowing in.
Now the users start using it and they complain about having a logon prompt popup every time the hit "Detail info" button to jump into satellite system to see alert details. It's very annoying when they need to check many alerts simultaneously.
So I investigated and found that the function is using LOGIN type RFC for the logon and it seems that SAP designed it to work this way, as SAP's own DEMO shows same thing.
Question: Is there a legitimate way to make BPMON function use TRUSTED RFC to show alert details instead of LOGIN RFC ?
By "legitimate" I mean, I know the LOGIN RFC can be "adjusted" to behave like TRUSTED, but that is not "legal" fix especially in production.
Appreciate any comments.
Thanks
Elena

Hi Elena
I assume you are using Login RFC in SolMan setup.
If you switch current RFC to Trusted RFC, if the user has Trusted RFC profile and same user exist in both system, user can use trusted connection.
Please go to transaction SolMan setup, and side bar menu managed system configuration and open managed config screen to target system. In the 3 rd step of the wizard, there is a place to configure RFC.
In case if BPMon, Read RFC is used for data collection(as of SAP TMW is used instead of READ).
And then there are 3 RFC TMW, Trusted and last one(RFC for Solution manager).
When you press the detail info button, last RFC is used. To this RFC type, you can assign RFC Login( this will ask login screen by default) or Trused RFC. I think you assin RFC login right now. That's why you have popup.
If you switch this to Trused one, Trused RFC is used.
Best Regards
Keiji

Minimum Trusted RFC's for productive system

Hi!
We have very strict requirements dealing with set up of Trusted RFC for productive system for ChaRM approach in SOLMAN.
Can some one tell me which Trusted RFC's and users for the productive system do I need?
a) Trusted RFC is not mandatory for the productive system
b) Trusted RFC only in productive system, client: 000, users: 1 communication user and 1Dialog user
c) Trusted RFC in productive system for each client with users...
Thank you very much!
H. Thomasson

Create the function modules in SE37 and set the remote-enabled flag in the attributes section. Then import them into XI.
Create a custom Z table through SE11 on each system to store any data, and the code in each function module would reference it. (Either that or just hard-code everything)
In short yes it can be done through SE37, no you don't need SE38.
I think you're talking about function groups which is a container for the function module. You can do everything through SE37 if you use the Goto->Function Groups-> Create Group option and give it the same name as your Function Module.

Trusted RFC not working for different user , working for same user

Dear All,
I have two SAP system - One Solman (7.0) and another ECC 6.0 (SR3) on HPUX box with Oracle DB (Unicode).
I want to establish Trust relationship between these system.
I have configured the same, as per the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm
and note 128447.
My requirement is one user X in solman client 001,
will execute some test plan (Tcode stwb_2) which will take the control to ECC 6.0 client 200, execute the tcode as user Y and come back in Solman again.
The user X (SAP_ALL) exists in Solman - client 001 and user Y (SAP_ALL) exists in ECC 6.0 - client 200.
In ECC 6.0 client 200, I have created a role ZRFCACL with the following and assigned to the user Y (as per the above help / note):
Role : ZRFCACL
Auth. Obj: S_RFCACL
Value assigned to fields are:
     RFC_SYSID : SOL
     RFC_CLIENT: 001
     RFC_USER : X
     RFC_EQUSER: N
     RFC_TCODE : *
     RFC_INFO : *
     ACTVT     : 16
Whenever the user X is trying to execute the test from solman, he is getting the error : "No authorization to log on as trusted system (RC = 0)"
Each time the user is trying the above, in ECC 6.0, the following dump is occuring:
CALL_FUNCTION_SINGLE_LOGIN_REJ under username SAPSYS
I have assigned the role ZRFCACL to user X in Solman also.
Next, I have performed the following check:
created one user M in both system
created the role ZRFCACL2 in ECC 6.0 client 200 as follows and assigned the role to user M:
     Role : ZRFCACL2
     Auth. Obj: S_RFCACL
     Value assigned to fields are:
          RFC_SYSID : SOL
          RFC_CLIENT: 001
          RFC_USER : ''
          RFC_EQUSER: Y
          RFC_TCODE : *
          RFC_INFO : *
          ACTVT     : 16
Assigned SAP_ALL to user M in both system (So the user M in Solman does not have ZRFCACL2).
This time, the trust relationship worked and no dump got generated.
I have also checked the thread Trusted RFC do not work
but unable to resolve the issue.
Any suggestion where the things are going wrong in this / what else I need to check or this is not possible at all?
Thanks in advance for your help.
Sudip

Hi Valdecir,
Thanks for the reply. I am providing the detail of the generated dump below:
Please check in case any clue is there.
Runtime Errors         CALL_FUNCTION_SINGLE_LOGIN_REJ
Date and Time          12.08.2008 18:59:32
Short text
No authorization to logon as trusted system (Trusted RC=0).
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An RFC call (Remote Function Call) was sent with the invalid user ID "98819 "
. Or the calling system is not registered as trusted system in the
target system.
How to correct the error
The error code of the trusted system was 0.
Meaning:
0    Correct logon as trusted system mode
1 No trusted system entry for the calling system "SOL " or the
security key entry for the system "SOL " is invalid
2 User "98819 " does not have RFC authorization (authorization object
(S_RFCACL) for user "98819 " witl client 001.
3    The timestamp of the logon data is invalid
The error code of the SAP logon procedure was 1.
Meaning:
0    Login was correct
1    Wrong password or invalid user ID
2    Locked user
3    Too many attempted logons
5    Error in the authorization buffer (internal error)
6    No external user check
7    Invalid user type
System environment
SAP-Release 700
Application server... "gcbeccd"
Network address...... "10.10.4.158"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "gcbeccd"
Database type..... "ORACLE"
Database name..... "RD3"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 5 2008 00:55:24"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 146
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1194640
MM Free. 2992576
User and Transaction
Client.............. 000
User................ "SAPSYS"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "489F2BD6C36D0F12E10000000A0A049E"
Program............. "SAPMSSY1"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "SOL"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. 001
User................ 98819
Transaction......... "SMSY"
Call Program........."SAPLSRTT"
Function Module..... "SCCR_GET_RELEASE_NR"
Call Destination.... "SM_RD3CLNT200_TRUSTED"
Source Server....... "gcbsolm_SOL_00"
Source IP Address... "10.10.4.206"
Additional information on RFC logon:
Trusted Relationship "X"
Logon Return Code... 1
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "SAPMSSY1".
Source Code Extract
Line
SourceCde
37
endmodule.
38
39
module %_rfcdia_call output.
40
"Do not display screen !
41
call 'DY_INVISIBLE_SCREEN'.
42
perform remote_function_diacall.
43
endmodule.
44
45
module %_cpic_start.
46
if sy-xprog(4) = '%RFC'.
47
perform remote_function_call using rfctype_external_cpic.
48
else.
49
call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50
perform cpic_call using convid.
51
endif.
52
endmodule.
53
54
55
form cpic_call using convid type c.
56
communication send id convid buffer header.
57
if sy-subrc eq 0.
58
perform (sy-xform) in program (sy-xprog).
59
else.
60
message a800.
61
endif.
62
endform.
63
64
form remote_function_call using value(type).
65
data rc type i value 0.
66
do.
>>>>>
call 'RfcImport' id 'Type' field type.
68
if sy-xprog = 'JAVA'.
69
system-call plugin
70
id 'JAVA' value 'FORW_JAVA'
71
id 'RC'   value rc.
72
if there is no rollout on the JAVA side which
73
rolls both, JAVA and ABAP, we return to the
74
C-Stack and reach this point
75
76
in case there was an rollout, the ABAP-C stack is lost
77
and we jump direkt to this point
78
79
here we trigger the rollout on this Abap side with
80
the following statement
81
system-call plugin
82
id 'JAVA' value 'ROLL_OUT'
83
id 'RC'   value rc.
84
else.
85
perform (sy-xform) in program (sy-xprog).
86
rsyn >scont sysc 00011111 0.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080812
SY-UZEIT
185932
SY-XPROG
SAPRFCSL
SY-XFORM
READ_SINGLE_LOGIN_DATA
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
2 FORM         SAPMSSY1                            SAPMSSY1                               67
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
%_RFC_START
Chosen variables
Name
Val.
No.       2 Ty.          FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
0000
0000
2222
0000
SY-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
0003
SY-XPROG
SAPRFCSL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455445422222222222222222222222222222222
3102633C00000000000000000000000000000000
%_ARCHIVE
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
READ_SINGLE_LOGIN_DATA
000000000000000000000000000000
000000000000000000000000000000
544455444445444445445422222222
2514F39E7C5FCF79EF414100000000
%_SPACE
0
0
2
0
No.       1 Ty.          MODULE (PBO)
Name %_RFC_START
%_PRINT
000                                                                                0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination was triggered in function "ab_xsignon"
of the SAP kernel, in line 2491 of the module
"//bas/700_REL/src/krn/rfc/absignon.c#9".
The internal operation just processed is "CALY".
Internal mode was started at 20080812185932.
Calling system.....: "SOL "
Caller.............: "98819 "
Calling client.....: 001
RFC user ID........: "98819 "
RFC client.........: 200
Trusted return code: 0
Logon return code..: 1
Transaction code...: "SMSY "
Active state.......: "-782823270"
Note: At releases < 4.0, the information for the caller is not
available.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(0) 0x4000000003b2b450 CTrcStack + 0x1b0 at dptstack.c:227 [dw.sapRD3_DVEBMGS00]
(1) 0x4000000004d2c470 Z16rabaxCStackSavev + 0x1d0 [dw.sapRD3_DVEBMGS00]
(2) 0x4000000004d32160 ab_rabax + 0x3570 [dw.sapRD3_DVEBMGS00]
(3) 0x4000000002b43cb0 SignOnDumpInfo + 0x280 at absignon.c:2491 [dw.sapRD3_DVEBMGS00]
(4) 0x4000000002b3f2f0 ab_xsignon + 0xb30 at absignon.c:876 [dw.sapRD3_DVEBMGS00]
(5) 0x4000000002aa4cb0 ab_rfcimport + 0x1ad0 at abrfcfun.c:3599 [dw.sapRD3_DVEBMGS00]
(6) 0x40000000040f4a80 Z8abjcalyv + 0x500 [dw.sapRD3_DVEBMGS00]
(7) 0x400000000402f190 Z8abextriv + 0x440 [dw.sapRD3_DVEBMGS00]
(8) 0x4000000003f538b0 Z9abxeventPKt + 0xb0 at abrunt1.c:281 [dw.sapRD3_DVEBMGS00]
(9) 0x4000000003f360a0 ab_dstep + 0x280 [dw.sapRD3_DVEBMGS00]
(10) 0x4000000001cb4600 dynpmcal + 0x900 at dymainstp.c:2399 [dw.sapRD3_DVEBMGS00]
(11) 0x4000000001cab0e0 dynppbo0 + 0x280 at dymainstp.c:540 [dw.sapRD3_DVEBMGS00]
(12) 0x4000000001cb1ec0 dynprctl + 0x340 at dymainstp.c:358 [dw.sapRD3_DVEBMGS00]
(13) 0x4000000001c9dff0 dynpen00 + 0xac0 at dymain.c:1628 [dw.sapRD3_DVEBMGS00]
(14) 0x4000000001fea460 Thdynpen00 + 0x510 at thxxhead.c:4830 [dw.sapRD3_DVEBMGS00]
(15) 0x4000000001fb4de0 TskhLoop + 0x4e20 at thxxhead.c:4518 [dw.sapRD3_DVEBMGS00]
(16) 0x4000000001faae40 ThStart + 0x460 at thxxhead.c:1164 [dw.sapRD3_DVEBMGS00]
(17) 0x4000000001569ec0 DpMain + 0x5f0 at dpxxdisp.c:1088 [dw.sapRD3_DVEBMGS00]
(18) 0x4000000002c10630 nlsui_main + 0x30 [dw.sapRD3_DVEBMGS00]
(19) 0x4000000002c105c0 main + 0x60 [dw.sapRD3_DVEBMGS00]
(20) 0xc00000000002be30 main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMSSY1
0
11.04.2005
09:27:15
22528
E
1
Prg
SAPLSCCA
1
05.07.2005
13:10:18
52224
E
2
Prg
SAPRFCSL
0
13.02.2005
17:31:45
17408
E
3
Typ
RFCSYSACL
0
13.02.2005
17:31:45
7168
4
Typ
SYST
0
09.09.2004
14:18:12
31744
Directory of Application Tables
Name                                     Date       Time       Lngth
Val.
Program SAPMSSY1
SYST                                       . .       : :     00004612
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0\0
Program SAPRFCSL
RFCSYSACL                                  . .       : :     00001760
SOL                             RD3
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
116
CLEA
00
0035
SAPMSSY1
60
117
CLEA
00
0036
SAPMSSY1
60
118
CLEA
00
0037
SAPMSSY1
60
119
MESS
00
001C
SAPMSSY1
60
120
ENDF
00
0000
SAPMSSY1
62
121
00
0000
SAPMSSY1
62
122
PERP
00
0001
SAPMSSY1
64
123
PERP
02
0000
SAPMSSY1
64
124
WHIL
00
0002
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
128
WHIL
00
0003
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
132
BRAN
05
001E
SAPMSSY1
66
133
CALY
00
0003
0038
002A
0005
002B
0000
0000
SAPMSSY1
67
>>>>>
CALY
02
0000
0039
8000
0000
0000
0000
0000
SAPMSSY1
67
141
COMP
00
0002
0010
003A
SAPMSSY1
68
143
BRAF
02
000E
SAPMSSY1
68
144
SRFC
01
0000
003A
003B
SAPMSSY1
69
146
SRFC
01
0000
003C
C000
SAPMSSY1
69
148
SRFC
02
0000
0000
0000
SAPMSSY1
69
150
SRFC
01
0000
003A
003D
SAPMSSY1
81
152
SRFC
01
0000
003C
C000
SAPMSSY1
81
Thanks & Regards
Sudip

Current user overruled in integration server

Hi,
I have a proxy-PI-IDOC interface. The connectivity between SAP PI and the backend system where the IDOC will be sent to is established via a trusted RFC connection where 'current user' is marked. In most of the times the interface is working but in several times I got the error in SM58 'You are not authorized to logon to the system..'. The problem however is that for this action the wrong user is used (an user that indeed is not authorized). It looks that in the connection from the PI system to the backed system the current user is lost and overruled by an user of a former message which has nothing to do with this interface but runs at the same time.
Has anyone faced the same problem and are there any solutions for this.
kind regards
Maarten

Hi,
I have a proxy-PI-IDOC interface. The connectivity between SAP PI and the backend system where the IDOC will be sent to is established via a trusted RFC connection where 'current user' is marked. In most of the times the interface is working but in several times I got the error in SM58 'You are not authorized to logon to the system..'. The problem however is that for this action the wrong user is used (an user that indeed is not authorized). It looks that in the connection from the PI system to the backed system the current user is lost and overruled by an user of a former message which has nothing to do with this interface but runs at the same time.
Has anyone faced the same problem and are there any solutions for this.
kind regards
Maarten

Unable to use Datasource.cfc in Admin API - The current user is not authorized to invoke this method

Hi Everyone,
I am having some issues accessing the methods in the datasource.cfc in the adminAPI.
I can successfully load the administrator CFC and am told that I have successsfuly logged in;
But when I try to subsequently load the datasource.cfc I get an error that the current user is unable to access the method.
/* Create an Admin API object and call the login method */
                                                  var local = {};
                                                  local.adminObj = createObject("component", "cfide.adminapi.administrator");
                                                  /* Enter your password for the CF Admin */
/* if you dump this - TRUE is returned */
                                                  local.adminObj.login(adminPassword="my_admin_user_password");
                                                  /* Create an object of datasource component */
                                                  local.dsnObj = createObject("component", "cfide.adminapi.datasource");
writeDump(local.dsnObj.getDataSources());
I tried creating separate admin users and passwords - yhinking that perhaps a revent hotfix had stopped the "admin" user from being allowed to use the adminAPI - but changing to a new adminuser yielded the same results.
I could login to the admin API with the new username and passsword - but could not access the datasource.cfc after that.
Here is the debug output from the error...
The current user is not authorized to invoke this method.
The error occurred in accessmanager.cfc: line 48
Called from datasource.cfc: line 52
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 155
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 52
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 45
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 1
-1 : Unable to display error's location in a CFML template.
Resources:
Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.31 (KHTML, like Gecko) Chrome/26.0.1410.64 Safari/537.31
Remote Address
127.0.0.1
Referrer
Date/Time
22-Apr-13 01:09 PM
Stack Trace
at cfaccessmanager2ecfc974154242$funcCHECKADMINROLES.runFunction(E:/cf10_final/cfusion/wwwro ot/CFIDE/adminapi/accessmanager.cfc:48) at cfdatasource2ecfc1679861966$funcGETDATASOURCES.runFunction(E:/cf10_final/cfusion/wwwroot/ CFIDE/adminapi/datasource.cfc:52) at cfApplication2ecfc498167235$funcPREREQUISITESTART.runFunction(C:/inetpub/wwwroot/projectD ir/trunk/Application.cfc:155) at cfApplication2ecfc498167235$funcINIT.runFunction(C:/inetpub/wwwroot/projectDir/trunk/Appl ication.cfc:52) at cfApplication2ecfc498167235._factor5(C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: 45) at cfApplication2ecfc498167235.runPage(C:/inetpub/wwwroot/projectDir/trunk/Application.cfc:1 )
coldfusion.runtime.CustomException: The current user is not authorized to invoke this method. at coldfusion.tagext.lang.ThrowTag.doStartTag(ThrowTag.java:142) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2799) at cfaccessmanager2ecfc974154242$funcCHECKADMINROLES.runFunction(E:\cf10_final\cfusion\wwwroot\CFIDE\adminapi\accessmanager.cfc:48) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:655) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:444) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:414) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2432) at cfdatasource2ecfc1679861966$funcGETDATASOURCES.runFunction(E:\cf10_final\cfusion\wwwroot\CFIDE\adminapi\datasource.cfc:52) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:405) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:655) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:444) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:414) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2432) at cfApplication2ecfc498167235$funcPREREQUISITESTART.runFunction(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:155) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:405) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2659) at cfApplication2ecfc498167235$funcINIT.runFunction(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:52) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2659) at cfApplication2ecfc498167235._factor5(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:45) at cfApplication2ecfc498167235.runPage(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:244) at coldfusion.runtime.TemplateProxyFactory.resolveComponentHelper(TemplateProxyFactory.java:538) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:234) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:159) at coldfusion.runtime.TemplateProxyFactory.resolveFile(TemplateProxyFactory.java:120) at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:138) at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:84) at coldfusion.runtime.AppEventInvoker.<init>(AppEventInvoker.java:64) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:232) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:112) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:219) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:204) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662)
And here is the listed exceptions, beneath the stack trace;
13:09:56.056 - cfadminapiSecurityError Exception - in E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc : line 48
         The current user is not authorized to invoke this method.
13:09:56.056 - cfadminapiSecurityError Exception - in E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc : line 48
         The current user is not authorized to invoke this method.
13:09:56.056 - java.io.FileNotFoundException - in C:/ColdFusion10/cfusion/wwwroot/WEB-INF/exception/errorcontext.cfm : line 44
         E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc (The system cannot find the path specified)
This perspn seems to be having the same issue;
http://forums.adobe.com/message/5051892
and I agree I don't have "E" drive either!

I've found a solution to my plight - I don't know if it'll work for you or help you try something that MAY fix it.
I use a common code set which includes the Application.cfc from a CF Mapping - So, in the application.cfc in the actual website I do this:-
<cfinclude template="/UberDirectory/Application.cfc">
Then, in the /UberDirectory/Application.cfc, I was initialising a CFC which checks if the datasource was created for the website. The datasource checking code attempts to log into the Admin API and check & create if necessary the datasource.
This has previously worked without fail for me - But in this instance it failed!! I was doing two things wrong - Firstly, the CFC should only be called in the Application.cfc in the onRequestStart section as the Application had to be initialised first - This is maybe because I've invoked the application.cfc in a "non-standard" manner.
Secondly, once I'd moved the CFC invocation into oNRequestStart I saw the following error:-
The string COOKIE.CFAUTHORIZATION_uber-directory is not a valid ColdFusion variable name.
I had this as the app name .... <cfset this.name = 'uber-directory'>
Changedthe dash to an underscore and I was away and could once again check the datasources
Hope it helps
Martin

Filter Project Server custom field based on current user?

I've got a Project Server 2013 custom field, and I'd like to create a view that only shows me projects where the value in that custom field equals the current user. Simply put: I'm trying to find functionality similar to the [Me] filter in SharePoint.
Apparently, simply using [Me] doesn't work. How can I fix this?

I am trying to do something similar. were you able to find a solution to this? I am assuming no.
Parthiv Bhuta . Consultant

RFC login and user creation to remote system

Hi there,
Hopefully this is the related forum for this question. We have a scenario where we need an automated process to create users on one system and then create just the same account on a remote system with deactivated password.
How is this best handled in ABAP code where the system account info/password of the remote system is not listed in the abap code. Should a SM59 connection be created and then somehow this is referenced from abap code ?
Also, this will be a SM37 job stream running on the local server under one name running the job and in the code it should be using a different name (destination) for the remote connection to create the user.
I am a security person, not abaper. Input /best practice appreciated.
Thanks !

> I am a security person, not abaper. Input /best practice appreciated.
Actually this is a security question, so I have moved it to the security forum...
If the password is to be deactivated in the target system but not in the source ("master" system) then you can use several standard user provisioning mechanisms for this (CUA, GRC-CUP, IdM, UME configuration...) and configure the target system to deactivate the password itself. There are also several ways of achieving this, without any coding required necessarily.
The most obvious one which jumps to mind is RZ11 parameter login/password_change_for_SSO.
Alternately if your scenario is better suited to it, you can also use login/password_max_idle_initial.
Also see transaction RSUSR200.
Etc...
> Should a SM59 connection be created and then somehow this is referenced from abap code ?
No. It should be referenced from configuration of the application which calls the RFC connection, defined in SM59. You can also optionally use the "current user" setting and alternate authentication methods to (saved) passwords. This I would generally recommend.
Cheers,
Julius
Edited by: Julius Bussche on Feb 23, 2010 10:36 PM

How to get the current user logon to portal?

Hi Gurus,
How to get the current user who logged into portal.
I have a webdynpro requirement where in which I have to get the current user id who loggedinto portal which will be the input parameter of the BAPI(adaptive RFC model) which will return me employee number of the particular user.
Can anyone send me the code to retrive the user id through webdynpro application..........
Pts will be rewarded for useful inputs......
Thanks in Advance,
Dharani

Hi Dharani,
Using UMEfactory u can do that...
1. create one input field,
2. create one attribute called Uid
3. assign Uid attribute to the input field
4. type the following code in Doinit() method
            String uid = wdContext.currentContextElement().getUid();
     try {
     IUser user = UMFactory.getUserFactory().
     getUserByLogonID(uid);
     String userName = user.getDisplayName();
     } catch (UMException ex) {
      e.toString();
5. after that go to Portal create one iview assign to particular user. then u get into the user details...
thats it
Regards,
P.Manivannan

Microsoft Word Has Not Been Installed for the Current User

Hi, everybody
I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
Routes tried and failed...
1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
-Kent S.
Be strong as a ship and wise as a whale

These questions are really best in the Microsoft Office Forums.
These are MS Office Questions not ZEN Questions.
Novell did not design Microsoft's Office Install.
I have nothing against snapshots, but it does not work great with the Office
installs, which you yourself know since you are posting here with problems
based on that.
And your other method you are trying with the break out is not working well.
We also know that from experience.
We can tell you that the way most people install it and the way most people
succeed doing it, is by doing it the way recommended and designed by
Microsoft.
ZEN does that just fine.
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"KentFSmith" <[email protected]> wrote in message
news:[email protected]...
>
> Thank you, Grimlock (-Grimlock?-)
>
> Through a google search I encountered a very close suggestion, and the
> poster said they couldn't remember the name of a MS utility but that
> there was one that would break out the individual MSIs from the Office
> 2007 setup.exe bundle. The dependent app appears to be a simple and
> possibly elegant solution, but without a good way to break out the MSIs
> I don't see how to do anything other than with a config.xml ('Config.xml
> file in the 2007 Office system'
> (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
>
> Do you know of that utility and where I can find it?
>
> There is a lot of history here now of just doing the individual
> applications. Everyone gets Word and Excel, but much fewer get
> PowerPoint and Access. All other reasons aside, a compelling one is the
> reduced number of help calls to the Help Desk here. Occasionally we
> also just run the whole Office install for someone who needs some of the
> odd utilities, but that is easily cost-justifiable for us to break them
> out as exceptions. Otherwise, we focus 90% of our support on just Word
> and Excel and it pays off nicely.
>
> If we switch to putting full Office 2007 on all PCs then there may be a
> better approach that include other tools than ZfD, such as the fact that
> we replace 1/3 of all PCs in the organization each year (so that no
> hardware is more than 3 years "behind"). We could put 1/3 of all Office
> 2007 installs into the new PC image. But we still need to support all
> the use of the apps after the install, so ZfD MUST work well, it simply
> MUST work well or we're screwed, to use the vernacular. Also, just
> switching from what we've been doing for years -- single app orientation
> -- means introducing new-ish issues that have to discover and explain to
> our comrades, and to adjust our orientation with unknown future costs.
>
> But that may end up being the simplest adequate solution. And that's
> what I want.
>
> -K
>
> grimlock;1883526 Wrote:
>> Craig Wilson wrote:
>> > You should really focus on #1.
>> > Snapshot is not the way to go.
>> >
>> > Details about what is Not working or what random behavior may help
>> folks.
>> > Ask in the MS forums may help too. dont' mention zenworks.
>> > Just say you are installing as Administrator from a share and getting
>> these
>> > errors.
>> >
>> > While not 100% accurate, it should be good enough to get some good
>> feedback.
>> >
>>
>> Nor is installing 1 app at a time. Install the whole suite, have an
>> icon for each app that runs the exe for that app with a dependency on
>> the another app that points to the installer msi.
>>
>> If any user runs any app, it will run if the executable is there
>> (meaning it's been installed). If the executable is not there then it
>> calls the dependent application (the installer app) and installs it,
>> and
>> then runs it.
>
>
> --
> KentFSmith
> ------------------------------------------------------------------------
> KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
> View this thread: http://forums.novell.com/showthread.php?t=391573
>
>

The current user username has not been granted the ADVISOR privilege despite having it !

Hi,
I'm trying to follow ML note 2499931.1 'Using Dbms_Advisor.Tune_Mview To Optimize Materialized Views For Fast Refresh' and am receiving an error suggesting the user4 does Not have the Advisor privilege
despite the fact that it does. What am I missing ?
Every note I've found so far suggests granting the privilege is the fix.
I have and continue to receive the error.
Version 11.2.0.3 on Redhat 5
select * from dba_sys_privs where grantee = 'SOAUSER';
GRANTEE                        PRIVILEGE                                ADM
SOAUSER                        CREATE MATERIALIZED VIEW                 NO
SOAUSER                        CREATE VIEW                              NO
SOAUSER                        CREATE PUBLIC SYNONYM                    NO
SOAUSER                        SELECT ANY DICTIONARY                    NO
SOAUSER                        ON COMMIT REFRESH                        NO
SOAUSER                        CREATE ANY DIRECTORY                     NO
SOAUSER                        CREATE DATABASE LINK                     NO
SOAUSER                        SELECT ANY TABLE                         NO
SOAUSER                        ADVISOR                                  NO
SOAUSER                        UNLIMITED TABLESPACE                     NO
SOAUSER                        CREATE SESSION                           NO
Error at line 2
ORA-13616: The current user SOAUSER has not been granted the ADVISOR privilege.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4869
ORA-06512: at "SYS.DBMS_ADVISOR", line 1969
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 490
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 970
ORA-06512: at "SYS.DBMS_ADVISOR", line 739
ORA-06512: at line 3
Thanks in Advance
Ken

Sorry, but the code I was receiving the error message for is essentially   the same as the example in the note. Assumed people would have access to the note.
The statement is:
variable foo varchar2(20);
declare foo varchar2(20) := 'ken_foo';
begin
dbms_advisor.tune_mview(:foo,
'create materialized view ken_foo
as
select
papf.rowid R_papf,
paaf.rowid R_paaf,
gcc.rowid R_gcc,
papf.employee_number,
gcc.segment4 cost_center
from hr.per_all_people_f@atc_pp_to_ebs_atcllc papf,
     hr.per_all_assignments_f@atc_pp_to_ebs_atcllc paaf,
     gl.gl_code_combinations@atc_pp_to_ebs_atcllc gcc
where papf.person_id = paaf.person_id
--and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
--and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
and paaf.default_code_comb_id = gcc.code_combination_id');
end;
Per another forum the answer appears to be that sys didn’t have the advisor privilege.
Granted advisor to sys and ran the statement again as soauser and no error.
Thanks
Ken

User ID & log in fix... to preserve or not preserve during the fix?

OK I have the same problem as most everyone else here but am not sure which preference to choose during the archive and install fix suggested by most everyone. So which option should I choose before I embark on this crazy bug fixing adventure.
Details: I upgraded to Leopard... Lost one of my four user log ins (the one with 8 or more characters in the password. Still have admin access via another user account (lucky me) but I want to get my other user log in back so the Re-install with Archive & install options seems to be working for most folks but am getting conflicting advice about weather to choose the "preserve option" or not
_*Do I choose the preserve user & network settings or not??????*_
For folks who have not scoured the 100s of other posts here is what I have gathered
http://docs.info.apple.com/article.html?artnum=107120 article
and
http://docs.info.apple.com/article.html?artnum=306840
and
I installed Leopard yesterday and had this problem - only said "Other..." and I could not sign on. None of the "gobbledygook" methods helped - a bit scary anyway. This morning I spoke to the local Apple supplier, who suggested to re-run the install, but click on "Options" and select "Archive & Install" - the default is just "install", which is what I ran.
At the end of the "Archive and Install" the user names were back, and everything seems normal.
I had the "Other" problem as well. Re-installing and selecting "archive & Install" in the "options" fixed it for me! Brought back all five users and their passwords (including the ones I had changed trying to fix this problem using the DVD install "utilities" and the "password reset" section.
Thanks.
I actually found that when I selected the drive to install to I did not double-click it to give me install options of keeping previous logins, once I reinstalled with this option, everything worked fine
einstall with archive method under options.
You have to reboot first with teh disc in the drive. Hold C the whole time.
and this posting which is the only one that mentions doing it without preserving
If you boot back up to the install disk, go to the Utilities menu then Password reset program. Select your hard drive and the drop down list for user accounts is empty, you could do the follwing to resolve the issue without looseing your personal files. Might take awhile though.
Do an Archive and Install without Preserving (http://docs.info.apple.com/article.html?artnum=107120)
When this is done you'll be guided through to make a new user account
Once in the new user account you go to /Previous Systems/<date and time of the A&I>/Users/<your home folder> and get all your files back

I had one account vanish in this way. This is what I did. In this case the missing account had a user name of bradleyross.
I logged in using an existing administrative account. You don't want to use the account that you create until after all of the files have been moved and had ownership updated.
1. Create a new account with a short user name of bradley.
2. Go into the terminal window and set the current directory to /Users/bradley
3. Delete everything in the bradley home directory
sudo rm -R /Users/bradley/*
4. Move everything in /Users/bradleyross to /Users/bradley
sudo mv /Users/bradleyross/* /Users/bradley
5. Change ownership to all of the files in /Users/bradley so that the owner is bradley
sudo chown -R bradley /Users/bradley/*
6. I was then able to log in to the bradley account and had all the files and settings from the bradleyross account.
7. I had to change a few shell scripts so that they contained /Users/bradley instead of /Users/bradleyross. I don't think that this will be a problem unless you have edited some UNIX shell scripts yourself.
Make a copy of everything in /Users/bradley and /Users/bradleyross before you start
I'm typing this in on a workstation at the Apple store at Christiana Mall in Delaware and typing this in from memory. I don't think I made any typos above, but look before you run.

Jump through query - It uses ALEREMOTE user instead of current user

Hi,
When I do the query in BW using TCODE-rsbbs, select source system, i can jump using query through Bex to ECC system the issue is:
--It logon using the ALEREMOTE user is there any way to make it to use the current logon user?
Thanks in advance

Suman\Madhavi
Thanks for your suggestions.
I am using a user with SAP_ALL but still same issue, it is taking the user specified in RFC connection instead of using the current user.
I created a new logical system and RFC connection with option use 'current user' and tried to create a new source system so that I can use it for RRI jumps but it failed with error: name <logical systemname> of client <client#> is not same as the name <new logical system name> of the warehouse.
Please let me know if have any suggestions.
Thanks

Groovy expression for fetching current user details

I have created a view object that retrieves user details from the database. Also for dynamically getting the details of the current user logged in i have defined a bind variable currentUser and the default expression is adf.context.securityContext.userName.When i give the fixed literal value as user name the details are fetched. However details are not fetched when i use the groovy expression. Can i get some help on this please.
Regards

details are not fetched when i use the groovy expressionby using groovy you cant the details
i cant get you, is this you question?
some hints, here
groovy expression as default value in a Entity's Field Problem

How to list all tables that belongs to the current user?

hi all
"select tblowner,tblname from tables where tblowner in (select user from dual);"
I want a list of all tables that belongs to the current user. I use the SQL above, but given "no rows selectd",but if
I replace the subquery with literal,like
"select tblowner,tblname from tables where tblowner = 'JFMDB');".
I got the list. why?
Thnk u very much！

This looks like a bug that was fixed in 7.0.5.13 and onwards. I can reproduce what you are seeing in 7.0.5.10.0 (Linux x86-64 / Access control enabled instance from root install) but not 7.0.5.13.0 (Linux x86-64 / Access control enabled instance from root install).
Unfortunately I don't have a bug number to pass on. I can't see anything relevant listed in the Release Notes and I haven't found a likely candidate in our internal listings. This may well have been one that was fixed "in passing" when RnD were working on something similar.

Trusted RFC User : Current User or Fixed?

Similar Messages

Maybe you are looking for