Trying to add Exchange server to existing O365 Tenant
Original installation moved mailboxes from Exchange 2010 server to O365 - worked great. Decomissioned the 2010 server, then realized that I needed it to do administration of Exchange on-line. Built new Exchange 2013 Server on-prem, patched to CU3, obtained public
cert, now running Exchange Hybrid wizard, but it is asking me (after several Send/Receive connector questions) to "Enter a FQDN for your on-premise org. This will configure the outbound mail connector to route mail from the
EOP service to your on-prem org".
At the moment, all mail is going in and out of the O365 tenant and I don't want to change that.
1. If it enter an Internet routable entry (mail.organization.com) will this change the mail flow of my tenant?
2. Do I need to configure this connection manually (i.e. Powershell).
Again, I only want this box to do mailbox administration, since we have ADFS and DirSync configured to integrate with on-prem AD.
Please advise
Take a peek at this --
http://technet.microsoft.com/en-us/library/jj863117.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Similar Messages
-
HI, Iam trying to Integrate Exchange server using Java Mail
Here is what iam stuck with, I have a problem while conneting to Exchange Server using imap over ssl.
My code looks like this
props.put("mail.imap.host",host);
props.put("mail.imap.sasl.authorizationid","user1");
props.put("mail.imap.sasl.enable","true");
props.setProperty("mail.imap.socketFactory.class","javax.net.ssl.SSLSocketFactory");
props.setProperty("mail.imap.socketFactory.fallback","true");
props.setProperty("mail.imap.socketFactory.port","993");
Authenticator auth = new myauthenticator(AdminUserName,AdminPassword);
Session session = Session.getInstance(props,auth);
session.setDubug(true);
Store store = session.getStore("imap");
store.connect();
I get the following Exception as
javax.mail.MessagingException: Software caused connection abort: recv failed;
nested exception is:
java.net.SocketException: Software caused connection abort: recv failed
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:571)
at javax.mail.Service.connect(Service.java:310)
at javax.mail.Service.connect(Service.java:169)
at javax.mail.Service.connect(Service.java:118)
at MoveCalendar.move(MoveCalendar.java:63)
at SendCalendar.send(SendCalendar.java:74)
at SendCalendar.main(SendCalendar.java:40)
Caused by: java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at com.sun.mail.util.TraceInputStream.read(TraceInputStream.java:110)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at com.sun.mail.iap.ResponseInputStream.readResponse(ResponseInputStream.java:97)
at com.sun.mail.iap.Response.<init>(Response.java:96)
at com.sun.mail.imap.protocol.IMAPResponse.<init>(IMAPResponse.java:61)
at com.sun.mail.imap.protocol.IMAPResponse.readResponse(IMAPResponse.java:135)
at com.sun.mail.imap.protocol.IMAPProtocol.readResponse(IMAPProtocol.java:261)
at com.sun.mail.iap.Protocol.<init>(Protocol.java:114)
at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:104)
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:538)
... 6 more
DEBUG: setDebug: JavaMail version 1.4.1
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
DEBUG: enable SASL
DEBUG: mail.imap.sasl.authorizationid: user1
If i change the sessionFactory.class or if I remove this property I donot get any Exception It gets Executed well, but IT goes directly to the Adminstrators Mail account but not to the AuthorizationId I gave it. Can any one give me sugssion upon this issue.I don't understand whether the problem was with the Exchange Server I was trying to connect or with my local Environmenthi,
Iam very thankful for your reply here's the requested debug steps
DEBUG: setDebug: JavaMail version 1.4.1
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
DEBUG: enable SASL
DEBUG: mail.imap.sasl.authorizationid: user1
DEBUG: protocolConnect returning false, host=india.lendingspace.com, user=PMaganti, password=<null>
* OK Microsoft Exchange 2000 IMAP4rev1 server version 6.0.6249.0 (lsinmail.india.lendingspace.com) ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
DEBUG: protocolConnect login, host=****, user=AdminUserName, password=<non-null>
IMAP SASL DEBUG: Mechanisms: NTLM
IMAP SASL DEBUG: No SASL support
A1 LOGIN AminUserName AdminPassword
A1 OK LOGIN completed.
A2 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A2 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
DEBUG: connection available -- size: 1
A3 SELECT INBOX
* 1 EXISTS
* 1 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
* OK [UNSEEN 1] Is the first unseen message
* OK [UIDVALIDITY 261914] UIDVALIDITY value
A3 OK [READ-WRITE] SELECT completed.
No of Messages msgs 1
A4 FETCH 1 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 1 FETCH (ENVELOPE ("5 Mar 2009 13:25:19 +0530" "Outlook Calendar Events Using Java" ((NIL NIL "XXXXX" "XXXXX")) ((NIL NIL "XXXXX" "XXXXX")) ((NIL NIL "XXXXX" "XXXXX")) ((NIL NIL "XXXX" "XXXX")) NIL NIL NIL "<XXXXX>") INTERNALDATE " 5-Mar-2009 13:25:19 +0530" RFC822.SIZE 1348)
A4 OK FETCH completed.
FROM: XXXX
SUBJECT: Outlook Calendar Events Using Java
DATE: Thu Mar 05 13:25:19 IST 2009
A5 FETCH 1 (BODYSTRUCTURE)
* 1 FETCH (BODYSTRUCTURE (("TEXT" "CALENDAR" ("CHARSET" "US-ASCII") NIL NIL "7BIT" 598 10 NIL NIL NIL) "mixed" ("boundary" "----=_Part_0_18680399.1236239719654") NIL NIL))
A5 OK FETCH completed.
[ Multipart Message ]
CONTENT:TEXT/CALENDAR; charset=US-ASCII
A6 STORE 1 +FLAGS (\Answered)
* 1 FETCH (FLAGS (\Answered \Recent))
A6 OK STORE completed.
A7 COPY 1 CALENDAR
A7 OK [COPYUID 262745 258 23] COPY completed, 1 messages copied.
A8 EXAMINE INBOX
* 1 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS ()] Permanent flags
* OK [UNSEEN 1] Is the first unseen message
* OK [UIDVALIDITY 261914] UIDVALIDITY value
A8 OK [READ-ONLY] EXAMINE completed.
A9 CLOSE
A9 OK CLOSE completed.
DEBUG: added an Authenticated connection -- size: 1
A10 LOGOUT
* BYE Microsoft Exchange 2000 IMAP4rev1 server version 6.0.6249.0 signing off.
A10 OK LOGOUT completed.
DEBUG: IMAPStore connection dead
DEBUG: IMAPStore cleanup, force false
DEBUG: IMAPStore cleanup done
Actually what iam doing is read a mail which was more recent in inbox and If it is an Calendar event Iam copying that mail to Calendar Folder. So that Microsoft OUTLOOK automatically recongnizes them and secudles them in it's Calendars
This is actually done for adminstrator's Account but not for the user1
As you have suggested I removed the socketFactory class stuff and did this.
and this is my modified Code
props.put("mail.imap.host",imapHost);
props.put("mail.imap.sasl.enable", "true");
props.put("mail.imap.sasl.authorizationid", "user1");
Authenticator auth=new myauthentication(imapUserName,imapPassword);
Session session = Session.getInstance(props,auth);
session.setDebug(true);
store = session.getStore("imap");
store.connect();
And that goes like that. -
Trying to install Exchange Server 2013 and receive this error.
Hello,
I have a computer running Windows Server 2012 R2 Standard. I have completed all the prerequisites to install Exchange Server 2013. It all was going good until the install started. Then I received the below error. Does anyone have any suggestions? I am new
to Exchange Server so would thank and appreciate any help I could get to resolve this issue.
Thank You,
Stan
Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
" was run: "Microsoft.Exchange.Management.Tasks.InvalidWKObjectException: The well-known object entry B:32:A7D2016C83F003458132789EEB127B84:CN=Exchange Servers\0ADEL:16cd035a-6201-492f-b85f-1e28cc9f9ee0,CN=Deleted Objects,DC=MULTIAXCNC,DC=local on
the otherWellKnownObjects attribute in the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=MULTIAXCNC,DC=local points to an invalid DN or a deleted object. Remove the entry, and then rerun the task.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription, GroupTypeFlags groupType, Boolean createAsRoleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".Here is the error I am getting and the last setup log I can find. Any help how to get past the error would be helpful.
Thank You,
Stan
Error
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.AddAccessRuleCryptographicException: Could not grant Network Service access to the certificate with thumbprint 845C42A131A8A73487400A91491182FB95B81612
because a cryptographic exception was thrown. ---> System.Security.Cryptography.CryptographicException: Access is denied.
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.CAPIAddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.AddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, String websiteName, Boolean requireSsl, ITopologyConfigurationSession dataSession, Server server,
List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Setup Log Below
# Default Install steps for ClientAccessRole.
# Programmatically generated on 7/5/2014 10:58:24 PM.
# Variable Declarations
$RoleAllRoles = 'BridgeheadRole,GatewayRole,ClientAccessRole,MailboxRole,UnifiedMessagingRole,FrontendTransportRole,AdminToolsRole,MonitoringRole,CentralAdminRole,CentralAdminDatabaseRole,CentralAdminFrontEndRole,LanguagePacksRole,CafeRole,FfoWebServiceRole,OSPRole'
$RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Bin'
$RoleCustomerFeedbackEnabled = $True
$RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Datacenter'
$RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDomainController = 'MULTIAX2012.MULTIAXCNC.local'
$RoleExternalCASServerDomain = $null
$RoleFqdnOrName = 'MULTIAX2012.MULTIAXCNC.local'
$RoleInstallationMode = 'Install'
$RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V15\'
$RoleInvocationID = '20140705-2258240578829153548'
$RoleIsAdminToolsRoleInstalled = $True
$RoleIsBridgeheadRoleInstalled = $True
$RoleIsDatacenter = $False
$RoleIsDatacenterDedicated = $False
$RoleIsFfo = $False
$RoleIsPartnerHosted = $False
$RoleLanguagePacksPath = 'C:\Exchange\'
$RoleLoggedOnUser = 'MULTIAXCNC\Administrator'
$RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Logging'
$RoleNetBIOSName = 'MULTIAX2012'
$RoleNoSelfSignedCertificates = $False
$RolePreviousVersion = $null
$RoleProductPlatform = 'amd64'
$RoleRoleName = 'ClientAccessRole'
$RoleRoles = 'BridgeheadRole,AdminToolsRole'
$RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
$RoleTargetVersion = '15.00.0913.022'
$RoleUpdatesDir = $null
# Component tasks
# Tasks for 'All Roles Common First' component
# [ID = AllRolesCommonFirst___3e69ba31a53e4c29a2d6bffcf78cc614, Wt = 5, isFatal = True] "Starting the WMI service."
7/5/2014 10:58:24 PM:
if (Get-Service winmgmt* | ?{ $_.Name -ieq "winmgmt" })
Set-Service winmgmt -StartupType Automatic
Start-SetupService -ServiceName winmgmt
# [ID = AllRolesCommonFirst___56139ce4432346ecb7936afae4c3a9cc, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
& $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoleName.Replace('Role','')
# [ID = AllRolesCommonFirst___edc23bc11a4e4119a6a4ee802ff1ea49, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
if ($RoleRoles)
& $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoles.Replace('Role','').Split(',')
# [ID = AllRolesCommonFirst___62f13a063b2846a5ab20765bb7a3fc51, Wt = 5, isFatal = True] "Starting the Remote Registry service."
7/5/2014 10:58:25 PM:Start-SetupService -ServiceName RemoteRegistry
# [ID = AllRolesCommonFirst___00573a17b6e34c26842a6646830d57fa, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:25 PM:Set-LocalPermissions
# [ID = AllRolesCommonFirst___77668249568048d3812fb7cdba08c58b, Wt = 1, isFatal = False] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF");
$mflFilePath = ($RoleInstallPath + "bin\en\Exchange.MFL");
compile-moffile -MofFilePath:$mofFilePath;
compile-moffile -MofFilePath:$mflFilePath;
# [ID = AllRolesCommonFirst___f557448f44964e5eaa5dba792a3c4f09, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCByPortRule)
# [ID = AllRolesCommonFirst___84a0f0e2c2f44db2b537e9696c26fc3e, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCEPMapByPortRule)
# Tasks for 'ClientAccess Permissions Configuration' component
# [ID = ClientAccessLocalPermissionsComponent___6246589bb8494a3580c22c26e18451d1, Wt = 1, isFatal = True] "Setting folder or registry permissions for the Mailbox role: Client Access service. "
7/5/2014 10:59:35 PM:Set-LocalPermissions -Feature:"ClientAccess"
# Tasks for 'Exchange 2003 Registry Configuration' component
# [ID = LegacyRegistryMarkersComponent___7d6dadc1069b42ac93eadd1143c04a1a, Wt = 1, isFatal = True] "Installing/Removing registry values used by Exchange 2003 components"
7/5/2014 11:00:01 PM:set-ExsetdataRegistryMarkers
# Tasks for 'Client Access Perf Counters' component
# [ID = ClientAccessPerfCountersComponent___deb99c54869843b68426390615283ab7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:01 PM:new-PerfCounters -DefinitionFileName OwaInstallSingleCounters.xml
# [ID = ClientAccessPerfCountersComponent___ca78563ec1f1468982d1a2e59c6001bd, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:15 PM:new-PerfCounters -DefinitionFileName EcpPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69a559428fb42029ca3261e795b216d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:21 PM:new-PerfCounters -DefinitionFileName RwsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___c335490f948a4b16b5e2d2ce5f1eb9e7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:26 PM:new-PerfCounters -DefinitionFileName InfoworkerAvailabilityPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5af856aa00ae485ca206c5cdd13e9128, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:31 PM:new-PerfCounters -DefinitionFileName InfoworkerSharingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___86121d1b951e43fb934f1f1d573362eb, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:35 PM:new-PerfCounters -DefinitionFileName ThrottlingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___ea5896b92c494834b1a93c4620fcaef4, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:42 PM:new-PerfCounters -DefinitionFileName MiddleTierStoragePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___dab6f03bdf5141efb7b017c3009fb9e6, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:48 PM:new-PerfCounters -DefinitionFileName ActiveManagerClientPerfmon.xml
# [ID = ClientAccessPerfCountersComponent___5471455db0ef4610bf68fe7ad9417e19, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:53 PM:new-PerfCounters -DefinitionFileName RmsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___81ad52cb2950483196b52371b4d992c8, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:58 PM:new-PerfCounters -DefinitionFileName InfoworkerMailTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___072bf6737f1c42a0a8847ce35cf8a0c7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:03 PM:new-PerfCounters -DefinitionFileName InfoworkerUserPhotosPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___50b64611f7444bb49d50e00c206d2c13, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:08 PM:new-PerfCounters -DefinitionFileName AirSyncCounters.xml
# [ID = ClientAccessPerfCountersComponent___f2620ff8c3754396a8ea7d77257e2895, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:14 PM:new-PerfCounters -DefinitionFileName ClientAccessRulesPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4ef0f16c017840a583ace9f062300207, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:19 PM:new-PerfCounters -DefinitionFileName Imap4Counters.xml
# [ID = ClientAccessPerfCountersComponent___135fb06dadd9403a83ceebb290638efe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:24 PM:new-PerfCounters -DefinitionFileName Pop3Counters.xml
# [ID = ClientAccessPerfCountersComponent___312e8d44e92b45e0809f9d3d5dc2cfc0, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:29 PM:new-PerfCounters -DefinitionFileName WsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3c333497697041cb854190ec31c17b18, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:48 PM:new-PerfCounters -DefinitionFileName UMClientAccessCounters.xml
# [ID = ClientAccessPerfCountersComponent___ba015b97cc0b4beba7b25b6cb297fcac, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:54 PM:new-PerfCounters -DefinitionFileName AutodiscoverPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3daffea50d5a4318aab4aa737e508146, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:59 PM:new-PerfCounters -DefinitionFileName OAuthCounters.xml
# [ID = ClientAccessPerfCountersComponent___c71073d7f1ab4c119af83efb513b3a9d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:04 PM:new-PerfCounters -DefinitionFileName InfoWorkerMessageTrackingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___abdaf0bf21f4473b88819ee85cada219, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:10 PM:new-PerfCounters -DefinitionFileName RpcClientAccessPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___9f160f3e42984edfa25b62424ebc05b5, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName RpcClientAccessServerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___e55cb179521a4dacbeaa588c6948cf14, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName AddressBookServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___064a7856cf7c4b0399c85cf4f3bc2f1c, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:20 PM:new-PerfCounters -DefinitionFileName RpcEntryPointsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___42325F33-A961-41FE-B6B5-5CFB3AA9820A, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:22 PM:new-PerfCounters -DefinitionFileName MapiHttpEmsmdbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4C04D747-3B5C-400A-980F-45504324EF42, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:28 PM:new-PerfCounters -DefinitionFileName MapiHttpNspiPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5ab36fffacd04975bb1bc681a214bf71, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:33 PM:new-PerfCounters -DefinitionFileName ThrottlingServiceClientPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6ca23933132d44b39d6586cb3f9f8f21, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:39 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6602c41b35254405bed412fab7d527fe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:44 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerMdbPerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___74e45a45ea8c449092a10929ae24ba4b, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:50 PM:new-PerfCounters -DefinitionFileName MlbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___a3bcb686add64cf296c8616d387d0323, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:55 PM:new-PerfCounters -DefinitionFileName MlbMultiInstancePerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___c00c15c4ef6f479b9f5deb852d8eda7d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:01 PM:new-PerfCounters -DefinitionFileName ProvisioningPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___fe1a2a7c828f4b57abc2e50dc09baddf, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:06 PM:new-PerfCounters -DefinitionFileName GalsyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___35D14CB8B01949818832943A391D77B9, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName BackSyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69599d235234effb6d2740f3c52f7e1, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName AdminAuditPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___09bd11b57f6445e890391a507262cf32, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName InfoworkerMultiMailboxSearchPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___324687361E1C473A834C22A66104679f, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName ProvisioningCachePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___98C36FFEC7944065889DB24067CFD3EE, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:21 PM:new-PerfCounters -DefinitionFileName OABRequestHandlerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___1F5A7B68C95B42568E02FAA15A05EF17, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:26 PM:new-PerfCounters -DefinitionFileName DlpPolicyTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___995DEA7A1AC5467C89939F5F8CE5F2AF, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:31 PM:new-PerfCounters -DefinitionFileName ConfigurationCachePerformanceCounters.xml
# Tasks for 'Client Access Configuration' component
# [ID = ClientAccessComponent___d5119205104847bcb275cb63b65160b6, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:35 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Owa\Bin\Microsoft.Exchange.Clients.Owa.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___954344d74d8849e9ae7123b91761ed9d, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:57 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Sync\Bin\Microsoft.Exchange.AirSyncHandler.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___6632d6c1d5054563942db4f180976238, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:01 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\AutoDiscover\Bin\Microsoft.Exchange.AutoDiscover.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___390b4ffddd484dcb9edc01dd725e020a, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:07 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\exchweb\ews\bin\Microsoft.Exchange.Services.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___178a10624c88445093855c4ede7e9b9c, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:
. "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";
Set-NtlmLoopbackCheck $false
# [ID = ClientAccessComponent___14a6761e144e428b93c62249acc814fe, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:install-ClientAccessIisWebServiceExtensions
# [ID = ClientAccessComponent___28fdfe8bec984e809cdeef6d4d59bf4e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:43 PM:
if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
restart-service MSExchangeServiceHost
# [ID = ClientAccessComponent___7816256880dc4be0baf5b005b2af8cd3, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if (get-service MSExchangeProtectedServiceHost* | where {$_.name -eq "MSExchangeProtectedServiceHost"})
restart-service MSExchangeProtectedServiceHost
# [ID = ClientAccessComponent___e95499b43bd1484dbc03098fb1b4e592, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:set-ExchangeServerRole -Identity $RoleFqdnOrName -IsClientAccessServer:$true -DomainController $RoleDomainController
# [ID = ClientAccessComponent___f4c48e196e374cf3af269b1cea0602c8, Wt = 1, isFatal = True] "Installing/Removing the WebReady Document Viewing service."
7/5/2014 11:04:45 PM:Install-TranscodingServiceEx
# [ID = ClientAccessComponent___f50fd59d231140eb9b2405bbed2b93d4, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if ($RoleIsDatacenter -eq $false)
uninstall-FBAService
# [ID = ClientAccessComponent___9fad9d51b3ec4ecdad567ab58e470be7, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if ($RoleIsDatacenter -eq $false)
stop-setupservice -ServiceName MSExchangeFBA
# [ID = ClientAccessComponent___1c7a7da2ab9d41bb8db75522ad28b9db, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
$tpath = "$env:SystemRoot\system32\inetsrv\microsoft.web.administration.dll";
add-type -Path $tpath;
$sm = new-object Microsoft.Web.Administration.ServerManager;
if ($sm.Sites["Exchange Back End"] -eq $null)
$ppath = "$env:SystemDrive\inetpub\wwwroot";
$s = $sm.Sites.Add("Exchange Back End","http", "*:81:", $ppath);
$s.ServerAutoStart = $true;
$sb =$s.Bindings;
$b = $sb.Add("*:444:","https");
$sm.CommitChanges();
# [ID = ClientAccessComponent___a5f211d837784aea931b9ba55c39996d, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
Get-ExchangeServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
# [ID = ClientAccessComponent__SetInstallPathInMrsAppConfig, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
Set-InstallPathInAppConfig -ConfigFileRelativePath "Bin" -ConfigFileName "MsExchangeMailboxReplication.exe.config"
# [ID = ClientAccessComponent___765cc444ba07411aa81d58397b0401fd, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if (!(get-service MSExchangeMailboxReplication* | where {$_.name -eq "MSExchangeMailboxReplication"}))
install-MailboxReplicationService
# [ID = ClientAccessComponent___151b722e327b42a69411df32afdbbcbb, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationFirewallRule)
# [ID = ClientAccessComponent___7d69bb94f08245589e49eb569c6d5f4f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
if (!(get-service MSExchangeMigrationWorkflow* | where {$_.name -eq "MSExchangeMigrationWorkflow"}))
install-MigrationWorkflowService
# [ID = ClientAccessComponent___95f051d9dc5941c4b6014181b6e5ce93, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeABRPCFirewallRule)
# [ID = ClientAccessComponent___959c2d6566984da6b8e0e3235c1c11c2, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangePOPBeByPortRule)
# [ID = ClientAccessComponent___29864e7462374fdb84fc75eec931d8e4, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeIMAP4BeFirewallRule)
# [ID = ClientAccessComponent___052e1b794d0641ada4d6d417061af2a8, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeOWAByPortRule)
# [ID = ClientAccessComponent___975efd8911fd41cca8b17462535d710e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationByPort)
# [ID = ClientAccessComponent___023036e43f004bda9f4f4e0b1e0d233f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Install-ResourceHealthActiveFlags
# [ID = ClientAccessComponent___3a51c2876e2c4643bc892d2665754228, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\PushNotifications\" -ConfigFileName web.config
# [ID = ClientAccessComponent___FCC16AC1FFED43518F8292DBE770C621, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\emsmdb\" -ConfigFileName web.config
# [ID = ClientAccessComponent___E9C71786D02E40CBB1403E2E1A4B0758, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\nspi\" -ConfigFileName web.config
# [ID = ClientAccessComponent___abcab6b91ac844848c58b4ee66fcbea6, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
."$RoleInstallPath\Scripts\Install-OutlookServiceVirtualDirectory.ps1";
# [ID = ClientAccessComponent___9D94915F-B12D-4579-93EE-36B6DF42CF4A, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
$MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
$MapiMailboxClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\emsmdb");
$clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiMailboxAppPool_CLRConfig.config");
Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiMailboxAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiMailboxClientAccessPath`" /applicationPool:MSExchangeMapiMailboxAppPool /path:`"/mapi/emsmdb`""
-IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___B551AAAC-0F36-428B-B1BB-3B9AFDC9EAEF, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:50 PM:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
$MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
$MapiAddressBookClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\nspi");
$clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiAddressBookAppPool_CLRConfig.config");
Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiAddressBookAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiAddressBookClientAccessPath`" /applicationPool:MSExchangeMapiAddressBookAppPool /path:`"/mapi/nspi`""
-IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___178FD1A31B5949A0B4A819E39311B1FD, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
$ExchangeLabsRegKey = 'HKLM:\SOFTWARE\Microsoft\ExchangeLabs'
$E4eCertificateDistinguishedNameRegValueName = 'E4eCertificateDistinguishedName'
if ($RoleDatacenterE4eCertificateDistinguishedName -ne $null)
New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eCertificateDistinguishedNameRegValueName -Value $RoleDatacenterE4eCertificateDistinguishedName -Force
Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. value: $RoleDatacenterE4eCertificateDistinguishedName"
else
Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. Value is null."
$E4eServiceUrlRegValueName = 'E4eServiceUrl'
if ($RoleDatacenterE4eServiceUrl -ne $null)
New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eServiceUrlRegValueName -Value $RoleDatacenterE4eServiceUrl -Force
Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. value: $RoleDatacenterE4eServiceUrl"
else
Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. Value is null."
# [ID = ClientAccessComponent___240c7e5d07f941cfbe69a692dc33a31a, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
."$RoleInstallPath\Scripts\ConfigureCafeResponseHeaders.ps1";
CreateCustomHeadersNodeForBackend 'autodiscover'
CreateCustomHeadersNodeForBackend 'ecp'
CreateCustomHeadersNodeForBackend 'ews'
CreateCustomHeadersNodeForBackend 'oab'
CreateCustomHeadersNodeForBackend 'owa'
CreateCustomHeadersNodeForBackend 'powershell'
CreateCustomHeadersNodeForBackend 'pushnotifications'
CreateCustomHeadersNodeForBackend 'rpcproxy'
CreateCustomHeadersNodeForBackend 'sync'
CreateCustomHeadersNodeForBackend 'mapi\emsmdb'
CreateCustomHeadersNodeForBackend 'mapi\nspi'
CreateCustomHeadersNodeForBackend 'outlookservice'
# [ID = ClientAccessComponent___75f8c93d15314369983d33ec0742e189, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:53 PM:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
# Tasks for 'POP/IMAP Backend Configuration' component
# [ID = PopImapBeComponent___d91be94d83bb4dc28e1fbdf7d94ca60e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:05 PM:
if (!(get-service MSExchangeIMAP4BE* | where {$_.name -eq "MSExchangeIMAP4BE"}))
install-Imap4BeService
# [ID = PopImapBeComponent___e2debc6ecabf457eb6f278096ad5102c, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
if (!(get-service MSExchangePOP3BE* | where {$_.name -eq "MSExchangePOP3BE"}))
install-Pop3BeService
# [ID = PopImapBeComponent___7ee4dbb3fe884d26bb3e060ac68061ee, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Pop3Service.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
$fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___9b86c2af9f364990aa196cb6e69905b6, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Pop3.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___01c604c08fd6402e9de6b3c45e3431c8, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Imap4Service.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
$fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___2528980001a444fcb7097d123e879728, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Imap4.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___bbfdc492aaf748298977cb9b98e00029, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Imap4Container -Name:"IMAP4" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___091c98cfe0f145189c0966717496795e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Pop3Container -Name:"POP3" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___42cb9f4ac2924c27b6ebf60b92a03628, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-ImapSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# [ID = PopImapBeComponent___181f5361a5df4e7ca009f21f26f8c0d5, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-PopSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# Tasks for 'ClientAccessExchangeCertificate' component
# [ID = ClientAccessExchangeCertificate___fb5e9028e669404d94dba90aace8c2f9, Wt = 1, isFatal = True] "Installing Client Access server certificates."
7/5/2014 11:05:07 PM:
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController -
Add extra Server in existing OAM setup
i am having OAM-OIM setup, i want to add new web logic server,how to do that?
Hi Kenneth,
It is possible. You can do it even without using SDK. just create a User Defined Field to the object lines you need. This will automatically create the new column.
The other option is to do it by code. For that the existing matrix should be empty. So if the matrix has values, you should save them, than add your column, and set the values again.
The last issue cold be done using formatted searches. Have a look at them.
I think you can get what you need without coding anything, just with UDF and formatted searches.
Regards,
Ibai Peñ -
Oracle ORA_16000 when trying to add standby instance to existing rac node
I attempted to use dbca to add a new standby instance to an existing cluster. The cluster is 4 nodes, Linux RHEL 5.3 Oracle 11.1.0.7. Also using ASM, asmlib, ocfs2 and shared block devices.
ASM instances are up and functional on all nodes. current config appears to be running normally and correctly.
I have a 4 instance database running on the cluster. I also have 3 physical standby active data guard instances running on 3 of the nodes. I wanted to add a new ADG instance to the 4th node.
While running dbca I received ORA-00604 and ORA-16000.
The active data guard database was open (read only) and redo apply was on. I am using data guard broker as well, but not grid control.
Does anyone have a procedure for adding an instance in this environment? Do I need to have the standby in mount state? If dbca won't work does anyone have a manual procedure for adding a new instance?
Thankszulo
Let's say you adding node nusclust160## to you existing cluster and dbca is a pain to use.
Extend clusterware to the nusclust160## server.
re: Page 64 of Oracle® Clusterware Administration and Deployment Guide 11g Release 1 (11.1)
1a.
Add undo tablespace to support additional node.
Re-check space for DATA1 on nusclust16007 and /dbdata/ORADB on sun16109.
As of Thursday, May 21, 2009 the DATA1 asm group has 53,584M free.
As of Thursday, May 21, 2009 the /dbdata/ORADB has 77G free.
In a separate terminal window on nusclust16007 run the following in sqlplus
CREATE UNDO TABLESPACE UNDOTBS4 datafile '+DATA1' SIZE 13300M AUTOEXTEND ON ;
This will take a long time to create this tablespace. Please minimize the window after submitting the ddl and move on to the next step.
1b.
Insure .bash_profile on nusclust160## should look like this:
vi .bash_profile
export ORACLE_HOSTNAME=nusclust160##
export ORACLE_SID=ORADB4
export ORA_CRS_BASE=/apps/ocr/oracle
export ORACLE_BASE=/apps/dbs/oracle
export PATH=/usr/ccs/bin:/usr/X/bin:/usr/bin:/usr/sfw/bin:/usr/sbin:/usr/local/bin
export server=`uname -n`
export PS1="$ORACLE_SID@$HOSTNAME >"
alias cls='clear'
alias More='more'
alias ll='ls -lt | more'
Gather IP addresses for fourth node from /etc/hosts:
222.65.125.### nusclust160##
222.65.125.### nusclust160##-vip
10.333.248.### nusclust160##-priv
2. Start Oracle Universal Installer:
Go to CRS_home/oui/bin and run the addNode.sh script on one of the existing
nodes. Oracle Universal Installer runs in add node mode.
The Oracle inventory on nusclust16007, nusclust16008, and nusclust16036 are found under:
/home/oracle/oraInventory
Use a X windows enabled session (The OUI takes 33 minutes)
cd /apps/ocr/oracle/product/11.1.0/crs/oui/bin
./addNode.sh
a. In the first screen specify a new node as :
Public Node Name: nusclust160##
Private Node Name: nusclust160##-priv
Virtual Host Name: nusclust160##-vip
If you receive the error:
" tar. ./bin/racgvip.orig: Permission denied"
Do the following:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
ls -al racgvip.orig
paste here:
chown root:oinstall racgvip.orig
chmod 771 racgvip.orig
should now show:
-rwxrwx--x 1 root oinstall 19213 Feb 11 08:36 racgvip.orig
As root:
a.
On nusclust160##:
cd /home/oracle/oraInventory
./orainstRoot.sh
b.
On nusclust16007:
cd /apps/ocr/oracle/product/11.1.0/crs/install
./rootaddnode.sh
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Attempting to add 1 new nodes to the configuration
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 4: nusclust160## nusclust160##-priv nusclust160##
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
/apps/ocr/oracle/product/11.1.0/crs/bin/srvctl add nodeapps -n nusclust160## -A nusclust160##-vip/255.255.255.224/bge0
c.
On nusclust160##:
cd /apps/ocr/oracle/product/11.1.0/crs/
./root.sh
WARNING: directory '/apps/ocr/oracle/product/11.1.0' is not owned by root
WARNING: directory '/apps/ocr/oracle/product' is not owned by root
WARNING: directory '/apps/ocr/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
OCR LOCATIONS = /raw/ocr/ocrconf1,/raw/ocr/ocrconf2
OCR backup directory '/apps/ocr/oracle/product/11.1.0/crs/cdata/rac_cluster' does not exist. Creating now
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/apps/ocr/oracle/product/11.1.0' is not owned by root. Changing owner to root
The directory '/apps/ocr/oracle/product' is not owned by root. Changing owner to root
The directory '/apps/ocr/oracle' is not owned by root. Changing owner to root
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: nusclust16007 nusclust16007-priv nusclust16007
node 2: nusclust16008 nusclust16008-priv nusclust16008
node 3: nusclust16036 nusclust16036-priv nusclust16036
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
nusclust16007
nusclust16008
nusclust16036
nusclust160##
Cluster Synchronization Services is active on all the nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
4. After this is done crs_stat -t will show nusclust160## in the crs i.e.
I see:
Name Type Target State Host
ora....160##.gsd application ONLINE ONLINE sun...160##
ora....160##.ons application ONLINE OFFLINE
ora....160##.vip application ONLINE ONLINE sun...160##
Do not be concerned about ora.nusclust160##.ons being OFFLINE, as that will be fixed shortly in a step that follows this one.
5. As oracle :
On nusclust16007:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
./racgons add_config nusclust160##:6251
This should take about one second to run.
If it says that it has already been added to the OCR you are fine.
If it hangs, you may need to reboot all servers to clear this issue.
6. Insure new node is properly added to ocr by running
On nusclust16007:
ocrdump
Check for the entries that show:
[DATABASE.ONS_HOSTS.nusclust160##.PORT]
ORATEXT : 6251
7. Check that your cluster is integrated and that the cluster is not divided into
partitions by completing the following operations:
On nusclust16007:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
./cluvfy comp clumgr -n all -verbose
Should see Verification of cluster manager integrity was successful.
8.
Use the following command to perform an integrated validation of the Oracle
Clusterware setup on all of the configured nodes, both the preexisting nodes
and the nodes that you have added:
AS oracle on nusclust16007:
cluvfy stage -post crsinst -n all -verbose
Post-check for cluster services setup was successful.
good: Post-check for cluster services setup was successful.
9.
On nusclust160## as oracle run the following:
cd /apps/ocr/oracle/product/11.1.0/crs/bin
./crs_stat -t | grep OFFLINE
If you see this:
ora.nusclust160##.ons application ONLINE OFFLINE
then run this:
./crs_start -all
After:
./crs_stat -t
ora.nusclust160##.ons application ONLINE ONLINE nusclust160##
If you see the above then you can move on the next step.
Adding database binaries to the nusclust160## server and setting up the listener.
1.
From nusclust16007:
Open an X window (The OUI part takes 13 minutes)
cd /apps/dbs/oracle/product/11.1.0/db_1/oui/bin
./runInstaller -addNode ORACLE_HOME=/apps/dbs/oracle/product/11.1.0/db_1 $*
You should get a prompt to specify a new node, in this case you should see nusclust160## where you will need to put a check mark beside it.
2.
from nusclust160##:
Eventually you will be prompted to run the following as root on the new node
On nusclust160##
cd /apps/dbs/oracle/product/11.1.0/db_1
./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /apps/dbs/oracle/product/11.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
3. verification
Now set up the .bash_profile and .asm profile to on nusclust160## to support new ORADB4 and +ASM4 instances for the oracle userid.
On nusclust160##:
cp .bash_profile .bash_profile.bak
On nusclust16007:
sftp nusclust160##
put .bash_profile
On nusclust160##:
vi .bash_profile
change ORALCE_SID to ORADB4
cp .bash_profile .asm
vi .asm
change ORALCE_SID to +ASM4 in .asm file
which sqlplus
Should show the path below is $PATH environmental variable is set correctly.
/apps/dbs/oracle/product/11.1.0/db_1/bin/sqlplus
On nusclust160##:
oifcfg getif
This should show:
ce4 10.333.248.192 global cluster_interconnect
ce5 222.65.125.128 global public
4.
Run Netbackup Oracle Agent link script.
As oracle make sure ORACLE_HOME is fined.
env | grep ORACLE_HOME
then
cd /usr/openv/netbackup/bin/
./oracle_link
ls -al $ORACLE_HOME/lib/libobk.so
should show:
/apps/dbs/oracle/product/11.1.0/db_1/lib/libobk.so -> /usr/openv/netbackup/bin/libobk.so64.1
5.
On the target node, run the Net Configuration Assistant (NETCA) to add a
listener. Add a listener to the target node by running NETCA from the target node and
selecting only the target node on the Node Selection page.
I shall do the following on nusclust160## using X Windows
Now before I do this I see:
crs_stat -t
ora.nusclust160##.gsd application ONLINE ONLINE nusclust160##
ora.nusclust160##.ons application ONLINE ONLINE nusclust160##
ora.nusclust160##.vip application ONLINE ONLINE nusclust160##
Connect to nusclust160## and open up X windows session.
netca
Choose Cluster configuration.
select nusclust160## as the node to configure.
Choose Listener configuration, then Add.
When it prompts you for a listener name choose LISTENER as it will append _NUSCLUST160##(server name) to end of the LISTENER name to make a complete listener name.
At this point you will have listener to support the new node in the crs.
now
crs_stat -t
will show:
ora....0#.lsnr application ONLINE ONLINE nusclust160##
ora.nusclust160##.gsd application ONLINE ONLINE nusclust160##
ora.nusclust160##.ons application ONLINE ONLINE nusclust160##
ora.nusclust160##.vip application ONLINE ONLINE nusclust160##
At this point the necessary crs entries for gsd, ons, vip, and the listener on nusclust160## all we need now are the ORADB4 and +ASM4 instances added.
III. 7/11/2009 7:40 AM Sat [120 min] NTTA DBA
Use NON dbca method to create additional instances on the nusclust160## server. This will involve a complete shutdown of all RAC instances.
1.
Undo tablespace creation was taken care of in Step I,1. Check on the progress of the creation of tablespace UNDOTBS4 in the minimized window. Should see tablespace on primary and physical standby databases.
2. First we shall set up the +ASM4 instance on nusclust160## and add it to the cluster.
On nusclust160##
cd $ORACLE_HOME/dbs
vi init+ASM4.ora
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cluster Database
cluster_database=true
cluster_database_instances=6
# Miscellaneous
diagnostic_dest=/apps/dbs/oracle
instance_type=asm
# Pools
large_pool_size=12M
asm_diskgroups='DATA1','ARCH','REDO1','REDO2'
asm_diskstring='/raw/asm'
+ASM1.instance_number=1
+ASM2.instance_number=2
+ASM3.instance_number=3
+ASM4.instance_number=4
3.
On nusclust16007
cd $ORACLE_HOME/dbs
sftp nusclust160##
put orapw+ASM1 /apps/dbs/oracle/product/11.1.0/db_1/dbs
put orapwORADB1 /apps/dbs/oracle/product/11.1.0/db_1/dbs
4.
On nusclust160##
cd $ORACLE_HOME/dbs
cp orapw+ASM1 orapw+ASM4
cp orapwORADB1 orapwORADB4
5.
On nusclust160##
cd $HOME
. ./.asm
sqlplus '/ as sysasm'
startup
create spfile from pfile='/apps/dbs/oracle/product/11.1.0/db_1/dbs/init+ASM4.ora' ;
shutdown immediate ;
startup
show parameters spfile
6. Now that we have a running asm instance add it the cluster.
On nusclust160##
srvctl add asm -n nusclust160## -i +ASM4 -o /apps/dbs/oracle/product/11.1.0/db_1
srvctl enable asm -n nusclust160## -i +ASM4
7. Now that we have an asm instance let's set up a database instance.
On nusclust16007/ORADB1 :
alter system set cluster_database_instances=6 scope=spfile ;
alter system set instance_name=ORADB4 scope=spfile sid='ORADB4' ;
alter system set instance_number=4 scope=spfile sid='ORADB4' ;
alter system set local_listener=LISTENER_ NUSCLUST160## scope=both sid='ORADB4' ;
alter system set thread=4 scope=both sid='ORADB4' ;
alter system set undo_tablespace=UNDOTBS4 scope=both sid='ORADB4' ;
alter database add logfile thread 4 group 28 ('+REDO1', '+REDO2' ) size 100M ;
alter database add logfile thread 4 group 29 ('+REDO1', '+REDO2' ) size 100M ;
alter database add logfile thread 4 group 30 ('+REDO1', '+REDO2' ) size 100M ;
alter database add logfile thread 4 group 31 ('+REDO1', '+REDO2' ) size 100M ;
alter database enable public thread 4;
Need to add 5 groups to support standby
So at the end of the day 900M will be added to REDO1(29,577M free) and 900M will be added to REDO2 (29,577M free).
8. Set up init.ora, listener.ora, and tnsnames.ora for ORADB4 on nusclust160##.
a. init.ora set up
cd $ORACLE_HOME/dbs
vi initORADB4.ora
SPFILE='+DATA1/ORADB/spfileORADB.ora'
b. add entries to tnsnames.ora:
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
ORADB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16007-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16008-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16036-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
LISTENERS_ORADB =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16007-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16008-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16036-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
LISTENER_NUSCLUST160## =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
ORADB_PRIM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16007-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16008-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust16036-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
c. add entries to listener.ora, The entries for most of this file should be set already, just insure modifications that need to be made are made.
SID_LIST_LISTENER_NUSCLUST160## =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps/dbs/oracle/product/11.1.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORADB)
(ORACLE_HOME = /apps/dbs/oracle/product/11.1.0/db_1)
(SID_NAME = ORADB4)
LISTENER_NUSCLUST160## =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = NUSCLUST160##-vip)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = 222.65.125.###)(PORT = 1521)(IP = FIRST))
9. Reload the listener.
lsnrclt
set current_listener LISTENER_NUSCLUST160##
reload
exit
10. Check audit trail, add instance to cluster, and start db instance.
a.
Check for audit directory and start the instance.
/apps/dbs/oracle/product/11.1.0/db_1/rdbms/audit
If this audit trail directory does not exist then create it.
b.
srvctl add instance -d ORADB -i ORADB4 -n nusclust160##
srvctl modify instance -d ORADB -i ORADB4 -s +ASM4
srvctl enable instance -d ORADB -i ORADB4
Will probably show: PRKP-1017 : Instance ORADB4 already enabled.
c.
sqlplus '/ as sysdba'
startup
**Because the cluster_database_instances parameter requires the complete shutdown of all instances in the cluster, you might have an issue when it attempts to start the instance. If you receive an error then run:
srvctl stop database -d oradb
sqlplus '/ as sysdba'
startup
shutdown
srvctl start database -d oradb
shutdown
srvctl start instance -d ORADB -i ORADB4 -o open
11.
Modify spfile of ASM1, ASM2, +ASM3
On nusclust16007
. ./.asm
sqlplus '/ as sysasm'
alter system set instance_number=4 scope=spfile sid='+ASM4' ;
On nusclust16008
. ./.asm
sqlplus '/ as sysasm'
alter system set instance_number=4 scope=spfile sid='+ASM4' ;
On nusclust16036
. ./.asm
sqlplus '/ as sysasm'
alter system set instance_number=4 scope=spfile sid='+ASM4' ;
b Modify tnsnames.ora on nusclust nusclust16007, nusclust16008, and nusclust16036
On nusclust16007
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
Add the following line to the ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the LISTENERS_ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the ORADB_PRIM alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
On nusclust16008
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
Add the following line to the ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the LISTENERS_ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the ORADB_PRIM alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
On nusclust16036
ORADB4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORADB)
(INSTANCE_NAME = ORADB4)
Add the following line to the ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the LISTENERS_ORADB alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
Add the following line to the ORADB_PRIM alias:
(ADDRESS = (PROTOCOL = TCP)(HOST = nusclust160##-vip)(PORT = 1521))
c Add standby logs on primary to support 4th node.
alter database add standby logfile thread 4 group 32 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 33 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 34 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 35 ('+REDO1', '+REDO2' ) size 100M ;
alter database add standby logfile thread 4 group 36 ('+REDO1', '+REDO2' ) size 100M ;
12.
Test the cluster to make sure everything is set up correctly.
a. Shutdown resources.
On nusclust16007:
emctl stop dbconsole
ps -ef | grep perl
ps -ef | grep agent
ps -ef | grep java
On nusclust16008:
emctl stop dbconsole
On nusclust16036:
emctl stop dbconsole
On nusclust16008:
cd $HOME
. ./.rman
cd scripts
./go
shutdown immediate
cd $HOME
. ./.bash_profile
srvctl stop database -d oradb
crs_stop -all
crs_stat -t
b. Startup resources
On nusclust16007:
cd $HOME
. ./.bash_profile
crs_start -all
crs_stat -t
The command above should show everything up and running.
ocrcheck
On nusclust16008:
cd $HOME
. ./.rman
cd scripts
./go
startup
On nusclust16007:
emctl start dbconsole
On nusclust16008:
emctl start dbconsole
On nusclust16036:
emctl start dbconsole
How does that work for you?
-JR jr -
Trying to add Kanaka server in directory utility
When I try to add a Kanaka servier ip adress in directory utility on Mac osx 10.6.8 I click the plus sign it puts host1.com and you can not edit it just add or delete it. Any thoughts?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I was able to edit it, though I had the same first impression. Click
RIGHT ON the 'host1.com' portion, not to the right of it in the white
space. Maybe double-click. Anyway, it works eventually. Also, this is
a Mac dialog box so if it really doesn't work (permissions or something
maybe) you'll need to talk to Apple about it.
Good luck.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJPGXACAAoJEF+XTK08PnB5vUEP/A67040zlHJnb7HgHBbip6BK
NLtPOO5iygbYBWFIVYIZ5ptuWr3P2vp3CKXg53yPL+rQGoAi+j 4ASyAKuS9GcSBr
qM0noBRDVSFAk9fX0AF/xQ1wbFkMirQml+q1H3vX0K7rGH78eFHoTFnWE1+q1gSq
HVaRWmQ+fzP1br9QgFidPh6VEQtnNXGVu1yy5M8jZ4MlqbjoV6 XSW2XHBVxyYpC3
/QSQkrtBJwGwJG7HRfV+8PpsSQIfMOBgCbQ3sIoTwkJbC96QmIb rv1QK79f4OIkY
MESPbv+qQjxJGHLFw9xqp/fc0u3vGu0mQAL0xon8cS8CiELgTFNpLMu6ZgTS149A
ir8J2WSxYb42w0rJMpYgS8NmXB9tU3mhz4jvnO/f6WylloKuMFpcOR1/BGxF6LQu
ZRp8TIlvX46l9ggIsjuAxZJHTBgurw+q2zl7V/OVLAjaCYDjbTm4vpY0LKwDAvW7
IooEwDp47vJV412mqiOLK1pQdj9d92UqE/NA51WlVo08DYYB4YTm6hCWjDDOr6Rr
n5gXiM7ZNCzvR9TdgZZIQzlc7+J7TdJXpM4RP/n8OOrq7pLYgsmkPR9ZzgNMi2U2
lDtpH0B7Hi6wLB+jSiwRl0YTNSm+1zLja0pWI/n0Yei3SVz52HICeL6JxsU+ccfq
JRWP/8qxZFSByNlQ/2N2
=xp4m
-----END PGP SIGNATURE----- -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
Exchange Server 2013 Missing file on ISO install Error Code 1603
Hi all, a mystery needs solving any suggestions much appreciated:
We are trying to install Exchange Server 2013 on Windows 2012 server.
The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
All preparation and requisites in place.
During Stage 2 Copying files, we receive an error code 1603 and installation halts.
The error states:
Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
Verify that the file exists and that you can access it.'.
We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
We have tried both Mailbox/Client Access and Mailbox only installations.
The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
Any ideas anyone, could we source a different ISO or copy of the file or ?????
Many thanks in advanceHad the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
a CSS and not as a TXT.)
I reran the install and it completed without issue. -
Exchange Server 2010 - DAG - Physical and Virtual
Hi All,
we are trying to configure Exchange Server 2010 SP1 DAG with TWO Servers, we are getting the error sector size on log file header was mismatch
1) Physical Server - when we check the sector size on log file - 512 bytes (RAID5)
2) Virtual Server - when we check the sector size on log file - 4096 bytes
is there any workaround to solve this issue or do i need to re-install the physical server with 4096 sector size..
When i check the Volume details on both machine
1)
Bytes Per Sector : 512
Bytes Per Physical Sector : <Not Supported>
Bytes Per Cluster : 4096
Bytes Per FileRecord Segment : 1024
2)
Bytes Per Sector : 512
Bytes Per Physical Sector : 4096
Bytes Per Cluster : 4096
Bytes Per FileRecord Segment : 1024
MCITPHi Jared,
I've got a question regarding your answer.
We have an existing Exchange 2010 DAG configuration with 3 mailbox servers in NL and 3 in the UK.
2 for normal databases at each site and 1 for Archive databases at each site.
The current Mailbox servers for the Archive databases are Hyper V 2008 R2 based VM's with a passthrough for storing the databases.
We now want add 1 new Mailbox server for storing archive databases at each site and add them to the DAG.
Can we use Windows 2012 Hyper-V hosts and create the new VM's with 4k sectorsize vhdx files for the new mailbox servers ?
Regards
Misha Verhoeven -
Exchange Server 2013 SP1 Standard: Installation failing can't progress
I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of racket
do they think they're running?).
The error message:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
Yet, I see no PushNotifications virtual directory or anything remotely related to that on IIS or in the inetpub folders and files. If I try to resume the set-up after this error I get:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The AD configuration for virtual directory 'PushNotifications' already exists in 'CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local', please remove this AD configuration manually.
Parameter name: VirtualDirectoryName".
And I have to remove this config using ADSI Edit, which just returns me to the first error.1. Prodution
2. Just 1 DC for 1 site.
3. Setup.EXE
4. Matches SP1 version numbers
5. That's just what was made available to me via MSPP, the installer doesn't see any updates?
6. Here is the log files:
[03/23/2015 22:06:52.0940] [1] Setup failed previously while performing the action Install. Looking for the failed task with ID ClientAccessComponent___75f8c93d15314369983d33ec0742e189.
[03/23/2015 22:06:52.0941] [1] 131 tasks were found to run.
[03/23/2015 22:06:52.0941] [1] Processing component 'Client Access Configuration' (Configuring Mailbox role: Client Access service.).
[03/23/2015 22:06:52.0941] [1] Executing:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
[03/23/2015 22:06:52.0955] [2] Active Directory session settings for 'New-PushNotificationsVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'SVR01.OFFICE.local', Preferred Global Catalog: 'SVR01.OFFICE.local', Preferred Domain Controllers: '{ SVR01.OFFICE.local }'
[03/23/2015 22:06:52.0956] [2] User specified parameters: -Role:'Mailbox' -DomainController:'SVR01.OFFICE.local'
[03/23/2015 22:06:52.0956] [2] Beginning processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:52.0999] [2] Searching objects "SVR02.OFFICE.local" of type "Server" under the root "$null".
[03/23/2015 22:06:53.0066] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:53.0068] [2] Processing object "SVR02\PushNotifications".
[03/23/2015 22:06:56.0763] [2] The properties changed on the object '' (CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local) are: "{ MetabasePath[msExchMetabasePath]='IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications', AuthenticationMethodFlags[msExchInternalAuthenticationMethods]='Ntlm, WindowsIntegrated', AuthenticationMethodFlags[msExchExternalAuthenticationMethods]='Ntlm, WindowsIntegrated', Id[distinguishedName]='SVR02\PushNotifications (Exchange Back End)', InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, OrganizationId[msExchOURoot, msExchCU]='' }".
[03/23/2015 22:06:56.0764] [2] Saving object "SVR02\PushNotifications (Exchange Back End)" of type "ADPushNotificationsVirtualDirectory" and state "New".
[03/23/2015 22:06:57.0073] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:57.0587] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:57.0591] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0378] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0378] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0386] [2] Ending processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:58.0388] [1] The following 1 error(s) occurred during task execution:
[03/23/2015 22:06:58.0388] [1] 0. ErrorRecord: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] 0. ErrorRecord: System.InvalidOperationException: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it. ---> System.Runtime.InteropServices.COMException: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
at Microsoft.Web.Administration.Interop.IAppHostAdminManager.GetAdminSection(String bstrSectionName, String bstrPath)
at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, String moduleName, String moduleType, ExchangeVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetLiveIdBasicAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, ADExchangeServiceVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServiceVirtualDirectory`1.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewPushNotificationsVirtualDirectory.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[03/23/2015 22:06:58.0389] [1] [ERROR] The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
[03/23/2015 22:06:58.0389] [1] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0390] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___75f8c93d15314369983d33ec0742e189 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03/23/2015 22:06:58.0390] [1] Setup is stopping now because of one or more critical errors.
[03/23/2015 22:06:58.0390] [1] Finished executing component tasks.
[03/23/2015 22:06:58.0406] [1] Ending processing Install-ClientAccessRole
It says it can not log on with the supplied details, but the account is an Administrator account with full privileges so I can't see why this would be the case. -
Cannot install Exchange server 2013
hey,
I'm trying to install exchange server 2013 on windows server 2012 and I getting this error :
One or more servers in the existing organization are running Exchange 2000 Server or Exchange Server 2003. Installation can't proceed until all Exchange 2000 or Exchange 2003 servers are removed.
Warning:
Cannot find the Recipient Update Service responsible for domain 'DC=Nesstr,DC=com'. New and existing users may not be properly Exchange-enabled.
Now, I think before I got here there was exchange server 2003 in virtual machine but I cant find the vm, probably someone has deleted the vm without uninstall the exchange properly and maybe this is the problem.
anyone suggestion what to do next ?
best Regards,
Idan keshetHi Idan,
We need to do these steps to connect to Configuration:
1. Open ADSI Edit.
2. Right-click ADSI Edit, select Connect to… .
3. In Connection Point, Select a well known Naming Context > Configuration.
4. Click OK.
Thanks,
Winnie Liang
TechNet Community Support -
Exchange Server Installation Error.
Please any one can help me to solve this issue.I am trying to Install Exchange server 2013 on Windows Server 2012 R2 . I have installed all Prerequisites for Exchange Server and The user is already a member of enterprise admin and schema admin but I am
getting following Error.
Error:
The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
Error:
Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
Error:
The local domain needs to be updated. You must be a member of the 'Domain Admins' group and 'Organization Management' role group, or 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.LocalDomainPrep.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain devcn and site Default-First-Site-Name, and wait for replication to complete.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspxDid you run setup.exe /PD or setup.exe /preparedomain
It does make a difference.....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013
Hi all to every techies ....
I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated ,
The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER
Thank you all
Neil PatricHi,
To understand more about the issue, I’d like to confirm the detail error when the installation failed.
As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
2. Installing the Exchange Server 2013 pre-requisites on the server
3. Running Exchange Server 2013 setup
For more information, you can refer to the following article:
http://exchangeserverpro.com/how-to-install-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support -
I need a mixed clustering environment that coexist 2007 CCR cluter with 2010 DAG or 2013 DAG.
Is there any step-by-step article I can refer to?Hi,
Do you want to know how to migrate CCR to DAG?
If you want to migrate from CCR to DAG, there are two available ways to achieve this.
One is to bring the new hardware, the other is to break and format the existing Exchange 2007 CCR Cluster to use the hardware.
Bring the new hardware, you need to install new server and configure Exchange 2010 DAG, then move mailbox from Exchange 2007 to Exchange 2010.
Breaking the existing Exchange 2007 CCR Cluster, you need to decommission your passive Exchange Server 2007 SP2 Node first, re-install Exchange 2010 server role on this server, and then configure Exchange 2010 DAG using this server. After that, you
can migrate mailboxes from Exchange 2007 to Exchange 2010, remove the last Exchange 2007 server. Then add seond server to existing DAG.
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support -
Exchange Server Setup Encountered an Error
I'm trying to install Exchange Server 2010 on a Windows 7 Service Pack 1 machine. I get to step 4... it says Microsoft Exchange Server 2010 Setup Initializing for a brief moment and then Exchange Server Setup Encountered an Error. I looked in
the event log and this is what it says, can someone help me figure out what is wrong?
Thank you,
Cynthia
Log Name: Application
Source: MSExchange Common
Date: 10/10/2014 1:12:36 PM
Event ID: 4999
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: HP
Description:
The description for Event ID 4999 from source MSExchange Common cannot be found. Either the
component that raises this event is not installed on your local computer or the installation
is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the
event.
The following information was included with the event:
9788
E12
c-RTL-AMD64
14.00.0639.021
ExSetupUI
M.E.Management.SystemManager
M.E.M.S.W.WizardForm.InitializeComponent
System.ArgumentException
e578
14.00.0639.021
Falsehi Cynthna7575
Thank you for your question.
By your state,I think you want to install EMC on windows 7.
If that,you can refer to the following steps;
1.Check that you have installed the necessary operating system components
a. Open Control Panel, and then select Programs.
b. Click Turn Windows features on or off.
c. Select Microsoft .NET Framework 3.5.1.
d. Navigate to Internet Information Services > Web Management Tools >IIS 6 Management Compatibility.
e. Select the check box for IIS 6 Management Console, and then click OK.
2.Ensure that you un-tick the box during the setup wizard to automatically install roles and features required for Exchange
3.If there will be issue, you can try to install Exchange management tool in other Windows 7 X64 machine to see whether it is OK
If any questions,please let me know.
Best Regard,
Jim Xu
Maybe you are looking for
-
JS CS3 import external data into Dialog.
I would like to create a dropdown in a dialog that is populated by either an XML or txt file. Can this be done? First an xml or txt file would be created listing all the current products we do. This would sit on a server. The InDesign script would re
-
New Source System Client for BW
Hi All, Currently we have R/3 QAS Clint 102 connected to BW QAS. We want to get rid of this Client 102 and connect a new QAS Client 100 (same server but different Client) to BW QAS. I created a new Source System (QAS100) in BW QAS and did a restore.
-
VB-Java bridge strange problem
Hi, We are using JCom for our application. Our server is a weblogic 6.1 app server hosting EJB's and our client is a Visual Basic(VB) trying to access these EJB's. I am using "zero client installation" programming model. I am getting a strange proble
-
When trying to serialize java5 enum types over iiop (e.g. using the wlogic.jar client), you'll get a Mismatched serialization UIDs-exception (tested with WLS 10.3). This derives from a known bug or an omission in the java5 specification. There's a go
-
I have Iphone 4, version 4.3.3 (8J2) How can i remove the brightness toolbar from the main page, below the applications above the shorcuts?