Trying to create a hideitem.js file to hide menu items in reader 11.07

I am looking to hide menu selections for Reader 11.0.7 by creating a HideItems.js file, is there a utility or document that I can refer to that identifies the values for each menu selection?
In the example below the value "HelpReader" was used, I am looking to find other values for additional menu selections.
//[Help - Adobe Reader X Help]
app.hideMenuItem("HelpReader"):
In particular I am trying to hide the View>>Comment>>Annotations and the View>>Read out loud entries.
thanks in advance
MtDew

Thank you for your information, this was exactly what I needed
thanks
Bob
On Wed, May 14, 2014 at 1:43 PM, Gilad D (try67)

Similar Messages

Trying to create cofile from data file

Hi All,
I am trying to create a cofile with the tp createcofile command and getting the following error .....
---> tp CREATECOFILE DC1K900012 pf=/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL
This is tp version 372.04.65 (release 701, unicode enabled)
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/DC1KK900012.DC1: Not a directory
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/SLOG1021.DC1.LOC: Not a directory
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG1021.DC1 for more details)
Please help with the syntax of creating a cofile ....
Thanks in Advance.
Regards,
Revanth Kumar

Hello Revanth,
the correct syntax is:
tp createcofile <transport_request> pf=<path_to_tp_profile> -s<extra_r/3_SID> -Dtransdir=<transport_directory>
where "-s<extra_r/3_SID>" is used only if you're generating the file to another system ID. Normally the correct system to connect to for export purposes is the source system and this normally is the same as the first three characters of the transport requests name. However in some cases this is not true and you want to specify a extra R/3-system name. In this case
you can use -s option as described above.
Best regards,
Tomas Black

Trying to create 5.1 test file - problems with LF channel

I'm trying to create a 5.1 test file. To do this I'm creating test audio that cycles through each 5.1 channel in turn - all of which is fine until I get to the LF channel. If I place a lf clip in the project, turn the LF bass clef all the way up and the centre down, it doesn't matter where I pan that clip, it still bleeds over into other channels. Because I'm trying to generate a test clip that cycles through each individual channel, I need to be able to have a piece of audio on the LF channel only without it coming out of any other channels...
help!!
many thanks

I discovered an easier method.
As we know, the Audio Mixer in Premiere has a flaw. You can't assign a track only to the LFE channel.
Here is the solution:
Import your Low frequency file into the project tab.
Select the file and click on Clip>Audio Options>Source Channel Mappings..., now under "Track Format" select 5.1, and repeatedly click the Channel tile until the Bass Clef appears.
It should look like this:
You just converted your mono LFE file into a virtual 5.1 surround file, with the LFE audio only on the LFE channel. This is the only way to achieve this solely in Premiere.
Now drag the LFE file from the project panel to the sequence. Notice that Premiere shows the track as a 5.1 surround track even though it's really mono.
Your file will now only play in the LFE channel.
For more info see my tutorial, Surround sound mastering..., here: http://forums.adobe.com/thread/517372

Is it possible to create a checkmark next to a context menu item in a Tree in LabVIEW?

Hello,
I'm creating a custom application where a particular context menu will be shown to the user depending on what item in the Tree they have right-clicked on. One of the items in the menu that I would like to display is essentially a "Disable" option. I'm looking for a way to show the user the current state of this Disable option by providing a checkmark next to it if they have already clicked it for a particular item in the tree. Here's a screenshot of a similar checkmark from the LabVIEW dev environment drop-down menus:
Does anyone know if it is possible to create a context menu with a checkmark like the one above in a Tree in LabVIEW? I've tried searching the web and here in the NI forums but without much luck. Thanks!
Lars L

Wow, I know this one!
I used it a couple of years ago (LV 8.6)
There is an option to "Set Menu Item Info" that allows you to set the check for a context menu item.
http://zone.ni.com/reference/en-XX/help/371361H-01/glang/set_menu_item_info/
I used it in my Tree
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

I cannot install itunes because of an error while trying to create directory H:\Program Files why is this happening

I get this message when trying to install itunes, I have tried just about everything but nothing works. I have wiped ALL traces of itunes and started again...no luck...iI tried a 32bit instead of a 64 which is what my pc is rated for...no luck...it was all due to the latest version being released so I tried to upgrade but nothing works. Not even rolling back to a previous version is working.
Any ideas????

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

An error occured while trying to create directory C:\Program Files\Common Files

iTunes and Quicktime kept giving errors when trying to update so I tried to uninstall and re-install but I get the same error and now don't have iTunes. I get multiple errors for c:\program files\common files\apple\apple application support\webkit.resources\ru.lproj and c:\program files\common files\apple\mobile device support\com.apple.windowsmail.client.resources\pt.lproj\localizable.strings. Verify that you have access to that directory.I have tried clearing cache, cookies, etc. Also tried to remove those files but I get another error. I have full administration rights and turned off all security. Any ideas???

I get multiple errors for c:\program files\common files\apple\apple application support\webkit.resources\ru.lproj and c:\program files\common files\apple\mobile device support\com.apple.windowsmail.client.resources\pt.lproj\localizable.strings. Verify that you have access to that directory.
I have tried clearing cache, cookies, etc. Also tried to remove those files but I get another error.
That's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive. There's XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I am using a web hosted email site and I am unable to use the clipboard/cut/paste functions? I already tried to create a user.js file with script but its still not working. What else can I do?

I have double, triple checked to script and I can't find any errors.
The only thing I might be unsure of is the actual site that I am listing. I tried https://www.webmail.????.com and I tried https://www.????.com. Is it that its a secure site? HELP

Did you try to use the keyboard instead (Cmd+V and Cmd+X and Cmd+C)?
Maybe Shift + Insert works as well on Mac (does work on Windows and Linux).
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

How do I correct iTunes v10.6 error when trying to create c:\ProgramData\Microsoft\Windows\Start MenuStart Menu folder

When I try to install v10.6 of iTunes for Win7, the installation is almost complete when I get an error "An error occured while attempting to create the directory: C/\ProgramData\Microsoft\Windows\Start Menu" I already have this folder installed with lots of data in it. I tried changing the name to "Start Menu 1" to fool the installer, but still received the error message.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

Why can't I close my PowerPoint files and my menu items won't work?

My MacBook Air has opened a number of Power Point files, and I can't close any of them. When I do a Force Quit, it closes everything, but when I start Power Point again, it opens up all of the same files, and then I'm stuck again. It won't let me close them or save them or anything. I am basically stuck.

Go to System Preferences > General and check "Close windows when quitting an app".

Trying to create Executeable jar file.Exception in thread main NoClassDef

Hi,
I am trying to create an executeable jar file.While running i am getting exception.
Exception in thread "main" java.lang.NoClassDefinitionFoundError: jartest
my java file: jartest.java
public class jartest
public static void main(String args[])
System.out.println("Weldone Phani");
I created a jar file name jartest using following command
jar cf jt.jar jartest.class
and then i created an manifestfile m.txt the following is m.txt
Manifest-Version: 1.0
Main-Class: jartest
Created-By: Me And My Family
Name: jartest.class
Java-Bean: False
Then i updated the manifest file in the jt.jar using following command
jar cmf m.txt jt.jar
while i try to execute the jar (java -jar jt.jar ) i am getting the above said exception
Where i went wrong. Thanks in advance.
phani

Please in the future do a search on the forum for your answer. If everyone asks the same question 10 times, then there is not one thread where a person can look, but 10 - each with a small piece. In fact, in this forum the second thread from the top answered your question/problem:
http://forum.java.sun.com/thread.jsp?forum=22&thread=141944
(You have a few problems, one of which is that the manifest MUST be named "MANIFEST.MF", and it MUST be in the folder "META-INF" from the jar's root. For the rest of the answers, look at the above thread)

Trying to create runnable .rar-file

I'm trying to create a runnable .jar-file of my application.
I've got two classes, StealthServer and ClientThread. StealthServer cointains the main method. I've joined these classes in a .jar-file as Demo.jar. I made a manifest-file like this:
Main-Class: StealthServerI joined the manifest-file with Demo.jar like this:
jar cmf manifest.txt start.jar Demo.jarThe I tried to run start.jar like this:
java -jar start.jarThat leaves me with this:
Exception in thread "main" java.lang.NoClassDefFoundError: StealthServerCan anyone tell me what I'm doing wrong?

This is what I got when I tried it your way ChuckBing.
C:\Shared\Demo\bytecode>java -jar Demo.jar
Exception in thread "main" java.lang.ClassFormatError: Incompatible
1347093252 in class file StealthServer
        at java.lang.ClassLoader.defineClass1(Native Method)
        at java.lang.ClassLoader.defineClass(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Unknown Sourc
        at java.net.URLClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.access$100(Unknown Source)
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClassInternal(Unknown Source)What is wrong now?

Create a Site Definition file with Visual Web part in Visual Studio

I tried to create a site definition file in Visual Studio 2013 and SharePoint 2013 by following the MSDN tutorial:
Walkthrough: Create a Basic Site Definition Project. Near the end, I added a virtual web part control to the site definition and registered MyWebPartControls in the site definition's default ASPX page as written in the MSDN tutorial:
Unfortunately, IntelliSense doesn't show any MyWebPartControls: tags, and VisualWebPart1 is highlighted with a warning “Element 'SMWebPart3' is not a known element. This can
occur if there is a compilation error in the Web site, or the web.config file is missing.”
Since it’s a warning, I went ahead to build and deploy the solution. However, when I used the site definition template to create a subsite, it returned a parser error:
Unknown server tag 'MyWebPartControls:TestSiteDef1.VisualWebPart1'
I spent half day researching and debugging, and finally solved the problem. The issue is on the registration line:
<%@ Register Tagprefix="MyWebPartControls" Namespace="TestSiteDef.VisualWebPart1" Assembly="$SharePoint.Project.AssemblyFullName$" %>
The $SharePoint.Project.AssemblyFullName$ is a replaceable parameter to provide values for SharePoint solution items whose actual values are not known at design time. Unfortunately, it does not find the right assembly name during the deployment. It should
be replaced by the Assembly’s Strong Name. Here is how I fixed the problem step by step:
In Solution Explorer, open the package node and double click Package.package
Click Manifest tab in the Package.package.
Copy the full assembly name in the package’s manifest. It may be similar like this:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Back to the site definition’s default.aspx page, replace the
Assembly="$SharePoint.Project.AssemblyFullName"
in the registration line with the copied text:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Change the Namespace from
Namespace="TestSiteDef.VisualWebPart1"
to
Namespace="TestSiteDef".
The line to register the web part in a site definition file will look like this:
<%@
Register
Tagprefix="MyWebPartControls"
Namespace="TestSiteDef "
Assembly="TestSiteDef, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
%>
Clean, build and deploy the solution. It works like charm. (Note: the warning message on visual web part may still exist, but you can ignore it).

Assuming your .ascx.vb file is inheriting from the web part class, you can add the custom properties in the same manor (language syntax aside).
Be sure to use the attributes to correctly identify and scope the properties. (see:
http://www.sbrickey.com/Tech/Blog/Post/SharePoint_Attributes_for_Web_Part_properties)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com

How to create parameter and control file like filename + date

Hello there
I am trying to create parameter and control file with following command
in SQLPLUS
create pfile='/u03/oradata/WEBDB/backup/initWEBDB.ora' from spfile;
In RMAN
copy current controlfile to '/u03/oradata/WEBDB/backup/cf_longterm.cpy';
how can I put date at the end of filename like
initWEBDB8jan06.ora and cf_longterm8jan06.cpy
Thanks in advance
Lionel

ASM is reliable but a smart DBA is very careful. If ASM is doing mirroring this is like RAID doing mirroring. What happens if you accidentally delete one copy ... the other one disappears instantly. Not a good idea.
With respect to redo logs you need a minimum of three groups, two members, and one thread per instance. So a 2 node cluster should, at a minimum have 12 physical files.
Not mirroring the redo logs, assuming multiple members, is not as critical.

How to set SAXParser at command-line interface to create a large XML file

Hi,
I am trying to create a large XML file (more than 50 MB) by selecting from Oracle database but failed because of "out of memory" error. According to "Oracle XML Developer Guide", we should use SAXParser to parsing a large XML file. But there is no example to show how to set SAXParser at command-line
Following is what I use to get xml files. It works only when the file is small.
java OracleXML getXML -DateFormat -withDTD -rowsetTag PO_HDR -conn
"jdbc:oracle:oci8:@server_name" -user "ID/password" "select * from table_name"
When I set SAXParser at the way below,
java oracle.xml.parser.v2.SAXParser OracleXML getXML -DateFormat -withDTD -rowsetTag PO_HDR -conn
"jdbc:oracle:oci8:@server_name" -user "ID/password" "select * from table_name"
it failed with the error message: "In class oracle.xml.parser.v2.SAXParser: void main(String argv[]) is not defined"
Does anyone know how to solve the problem? I'll be appreciated very much for your help.
Yi

here are my ideas.
register the xml schema.
using xmldom, generate the desired xml output and return as xmltype.
then you can use something like this to check.
declare
xmldoc xmltype ;
begin
   -- populate xmldoc from you xmldom function
   -- validate against XML schema
   xmldoc.isSchemaValid(schema_url, root_element);
   if xmldoc.isSchemaValid = 1 then
        --valid schema
   else
        --invalid
   end if;
end

Creating pdf from different file formats in binder

Hi.
I tried to create a combined pdf file from .docx, .doc, pdf, .xlsx files using drag and drop function in the Adobe XI trial version. I got a 31,000 page pdf document (instead of about 50 pages) in the binder for all the combined files. Most of the pages were blank. Can anyone give the reason for this. How to overcome the problem? If I don't get satisfactory solution to this, I don't intend to buy the product after the trial period.
Thank you.

What do you get if you just print any of the documents to the PDF printer? Never heard of this problem, so trying to troubleshoot is the only way to trace it.

Trying to create a hideitem.js file to hide menu items in reader 11.07

Similar Messages

Maybe you are looking for