Trying to figure out a Network Extender Problem
So I am not at a loss for trying to figure out what's the issue with my NE that I just got since I've had VZW service issues in my home for months.
Network:
Cable Modem->NAT Server -> Switch -> Network Extender
I've never had any IPsec issues using VPN on any of my work laptops with either Array or Cisco VPN. I went into the NAT server and port forwarding 53,500,4500,52428 on both UDP and TCP. I've tested that it works to another laptop behind the NAT box using both bit torrent tests / windows RDP. So the forwarding should work. I know there is no front end to the NE (which is frustrating) since I am seeing traffic come out the NAT to VZW (and VZW has shown me the local IP). So any advice here? If I plug the NE directly into the Cable Modem, works great in about 5 minutes. I find it hard to believe that this thing won't work with a switch (as per Samsung).
Any other advice here? I might have to add a 3rd NIC to my NAT Server just to dedicate to the NE if I can get the above to work.
Thanks for the help!
--Erik
See https://forums.adobe.com/thread/1619850
Similar Messages
-
My computer keeps dropping off our in-house wireless network. I have called my ISP and they say everything on their end is fine. I'm trying to figure if there's a problem with my Base Station. The green light remains on at all times. On my cable modem, the light signaling "PC Activity" and all other appropriate lights are on. I often have to restart my Base Station which then allows me to connect for a short period of time before my computer drops off the network again. Our other associated devices around the house (iPhone, other PC, other Smart Phone) don't remain connected to the network as well.
Sporadic drop-offs of wireless clients typically indicates that there can be at least two primary causes: 1) The wireless router may be misconfigured or not functioning properly, and/or 2) There is a significant amount of Wi-Fi interference in the nearby area that is preventing the wireless router from providing a "clean" signal for wireless clients to maintain a connection.
-
I am trying to figure out how to merge my AD network account.
I am trying to figure out how to merge my AD network account with my Mac account. The main reason for this is wanting to log into my admin account on the Mac, and have it also log into my network account so I do not have to log into differing accounts depending on wether I am on the network or not. And I am going to be running VMware fusion with windows on top, so having one account would be essential to this.
Thanks.
P.S. I am brand new to Apple, not by choice. ;-)Basically I want to link a network account to a local account, so that I always log into the same account, even if I do not have network access....
-
The messages on my Iphone and Mac don't match, My Mac is lacking messages. Do they only show if the sender has an iPhone, trying to figure out if thats what the missing names have in common, or if it a different problem?
Messages on the mac will only show iMessages sent from an iPhone, another mac, iPad etc etc...
It won't show SMS / Text messages.
If the messages are green on your iphone then they are text messages... Blue are iMessages -
Network Extender problems w/Qwest customers during July 2011
I believe I have found the cause of the Network Extender problems surfacing in July, 2011. I am a customer who has been out of Network Extender usage for two weeks now. Read on....
Unbelievably, almost no one at Qwest, Verizonwireless, or Samsung (NE's manufacturer) has any idea what the cause is and neither Qwest nor Samsung knows that a problem exists at all.
After many hours on the phone to all three companies I finally believe I know the cause of the problem. The cause is an updated firmware revision that was pushed to all Qwest customers who use the Actiontec PK5000 modem/router. They have been pushing it out over the last few weeks, so the symptoms have been rolling rather than happening all at one time.
The latest version of the PK5000 firmware is QAP002-3.60.3.0.9.9 When the customer's modem receives that version update (unbeknownst to them), Network Extender is rendered inoperable... the modem does not recognize the NE is plugged into it and does not provide an IP address. The WAN light goes solid red, the GPS goes magenta and the SYS light goes red.
Because Qwest's PK5000 works fine with the upgrade (i.e. both wi-fi and ethernet connections work fine with my Macintosh MacBook Pro), they have no interest in solving my VerizonWireless problem.
Bottom line is VerizonWireless needs to get a patch created "yesterday" and made available to all Network Extender customers who use the Actiontec PK5000 Qwest modem/router immediately. I live in a rural area and despite the fact I've had a VerizonWireless cell phone for many, many years, I'll be forced into changing cell phone providers soon, as will every other NE user who has lost their NE usage because of this problem.
It boggles my mind that no one has figured this out and provided a patch for the Network Extender. Understandably, Qwest could care less this is happening, since their service is not effected. This is truly VerizonWireless' problem.
Now, what can you do??? Call customer service right now and get technical support. Give them the information above and let them know they need to develop a patch for the Network Extender to work with the new firmware (i.e. operating system) of the Actiontec PK5000 modem. It's only when they hear from a bunch of people that they will step up the urgency to find a solution. Thanks!OK, what's the deal here. I've been having the same problems. Verizon gave me a new extender and I still have the same problem. The week of July 15th everything went dead. I live in downtown Denver and I still can't get service at my house. My network extender is no longer compatible with the PK5000 modem QWEST issued. Firmware got pushed out? uhh... OK that doesn't mean anything to me. Not my problem, but kudos to the gentlemen who figured that out.. Neither Verizon or qwest seem to not want to take responsibility.
So what's next? is there an extender on the market that is compatible with the infamous PK5000? Evidently, the guys @ Qwest I was on the phone with for 45 minutes seems to think it's some type of high speed low drag, technological phenomenon. I'd like to add that if someone from qwest or verizon tech support reads this, I do not have a land line at my house, I have never had a land line at my house so no I can't go to my desktop and troubleshoot the modem while on the phone. just to reinterate I live in downtown denver I do not have cell coverage at my house, and no it's not my house. Everyone in our area does not have coverage.
I've had verizon for over 10 years now and never had a problem. This is the first and biggest problem I had becasue verizon and qwest decided to "bundle" thier service offering...whatever that means.
I believe I have found the cause of the Network Extender problems surfacing in July, 2011. I am a customer who has been out of Network Extender usage for two weeks now. Read on....
"Unbelievably, almost no one at Qwest, Verizonwireless, or Samsung (NE's manufacturer) has any idea what the cause is and neither Qwest nor Samsung knows that a problem exists at all.
After many hours on the phone to all three companies I finally believe I know the cause of the problem. The cause is an updated firmware revision that was pushed to all Qwest customers who use the Actiontec PK5000 modem/router. They have been pushing it out over the last few weeks, so the symptoms have been rolling rather than happening all at one time.
The latest version of the PK5000 firmware is QAP002-3.60.3.0.9.9 When the customer's modem receives that version update (unbeknownst to them), Network Extender is rendered inoperable... the modem does not recognize the NE is plugged into it and does not provide an IP address. The WAN light goes solid red, the GPS goes magenta and the SYS light goes red.
Because Qwest's PK5000 works fine with the upgrade (i.e. both wi-fi and ethernet connections work fine with my Macintosh MacBook Pro), they have no interest in solving my VerizonWireless problem.
Bottom line is VerizonWireless needs to get a patch created "yesterday" and made available to all Network Extender customers who use the Actiontec PK5000 Qwest modem/router immediately. I live in a rural area and despite the fact I've had a VerizonWireless cell phone for many, many years, I'll be forced into changing cell phone providers soon, as will every other NE user who has lost their NE usage because of this problem.
It boggles my mind that no one has figured this out and provided a patch for the Network Extender. Understandably, Qwest could care less this is happening, since their service is not effected. This is truly VerizonWireless' problem.
Now, what can you do??? Call customer service right now and get technical support. Give them the information above and let them know they need to develop a patch for the Network Extender to work with the new firmware (i.e. operating system) of the Actiontec PK5000 modem. It's only when they hear from a bunch of people that they will step up the urgency to find a solution. Thanks!" -
been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?
i have this problem too
my dad thinks its because itunes is getting overloaded -
Lumia 920: Still trying to figure out what the pro...
Aside from being very upset about Nokia's not allowing updates for the unbranded 920s, I'm still trying to figure out what the problem is with my camera...
I had nearly a perfect working phone one and a half week ago. Even though the battery didn't last well and heated up somehow and there are gliches with some apps, the phone and its original apps worked without problem. Once the battery died in the middle of the night but I thought that it was because I didn't plug the charger well enough, it's a little loose anyway. I read about the freezes and restarts in different forums and was wondering what people were talking about, since I didn't have any such kind of problems. I felt myself being lucky.
Then I got some app updates (Nokia drive+ and a few others), and ever since then my camera hasn't worked properly. When I open the camera app or click the camera button nine out of ten times it just goes back to the home screen or else it freeze the phone. I have tried soft resets and restarts but they mostly don't work, or they might work long enough to take a couple of photos and then stop working, or otherwise it freeze the phone and need to soft reset it. There is no pattens as to when it works and when it doesn't. I have also tried to uninstall some apps but it seemed to have no effect on the condition of the phone. Every app that utilizes the camera won't work ( camera won't work but other functions work), flashlight app won't work.
Today I decided to hard reset the phone. It's surprisingly easy procedure that took less than 10 min. I did my first hard reset and chose to use my phone's backup files from Skydrive and it went fine, except it didn't do anything to the camera, i.e. it didn't work. My second hard reset I chose to "start from clean table" (or something of such) without any apps installed, and also disabled the automatic update but it didn't do anything either, no working camera. I did the same procedure once more just in case I did something wrong, but it didn't work. The fourth hard reset I restored from Skydrive to have (mostly) everything in order. No working camera either but almost everything else works now.
It puzzles me. I'd though that if the reason of camera not working is some app updates then start from the clean table would have resloved it. Even after hard reset using camera at the very first possible chance didn't succeed: it worked for a very short moment before it froze the phone, just like before resetting. If I can keep myself from touching the camera the phone itself works (aside from maybe once or twice restartd itself, very rarely anyway). Now I have a phone with a camera I can't use and I don't have a clue what the problem is. I don't think that there are hardware problems because the camera *worked*, and I don't believe that software updates can break it hardware-wise. I have thought of changing it but who can promise that I'll get a phone that works better. Probably I should wait for Microsoft's/Nokia's updates, it just feels like they never come...hi mate,
Sorry to hear you are having such a rough time with your 920. In this case, it might be best to take your phone back to your point of purchase and ask for a replacement, and if they are being less than helpful, to take it to your local Nokia Care point instead: http://nokia.com/support
I can certainly empathise with you, as a lot of the issues you describe are apparently fixed by the Portico update by Microsoft that was released yesterday to AT&T and Rogers devices but not the rest of the Lumia Windows Phone 8 range unfortunately. Bit of a wait, but hopefully not too long until the update hits. -
I accidentally bought the HD version of a movie for my daughter's nano. you can't watch HD on a nano. So I'm trying to figure out how to re-download the SD version. This help screen makes it seem like you can just correct the problem and just "download" the lower version. But when I follow the steps, I basically get to where I'm just having to actually purchase the other version. Do I have to pay to get the lower quality version after I've already paid for the HD version?
When you purchase an HD movie or show, in most cases the SD copy can be downloaded from your purchases area in iTunes. On the main iTunes Store page, go to Purchases under the Quick Links and then select Movies or TV shows as appropraite. Click the "Not On This Computer" button. Uncheck the "Download HD when available" box and you should then see the SD copies of the movies/shows and be able to download them.
Note that with digital copies from a Blu-Ray or DVD, if it comes with an HD copy, you normally cannot get the SD copy as well and have to purchase it separately if you want it.
Regards. -
My iPhone 4S is not showing up in iTunes. I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation. If anyone knows how to fix this problem, please advise. Otherwise any suggestions would be greatly appreciated.
Hi Josie,
I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
my mac is unable to connect to my printer hp4050 laser tn. message i get is apple link is not connected to communicate with the printer. i went to system preferences but could not turn on the apple link. i am very new to mac. in pc. i could figure out and fix the problem but in mac i have no clue at all what to do? it has been almost a week trying without success. help?
Your operating system, Snow Leopard (OS X 10.6), does not support AppleTalk. Instead, in Snow Leopard the HP 4000 series printers need to be set up to communicate via IP.
Go to System Preferences and open the Print & Fax item. Is your printer listed in that pane? -
Been using Macs since before classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents including what's not visible on screen (Name, Date Modified, Size Kind) in entire folder?
Screen shots are getting old hat.
Tried select all, copy, paste into pages, but it didn't display date modified, size & kind, and also included images of selected files, which is too large.
Any apps/shortcuts/utilities that can do this? Thanks in advance.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
Trying to figure out why is there a keystroke delay many times in Pages and Numbers? I'm on a 2010 macPro running Lion
I had a similar problem when working on a long Pages doc (40,000 words).The glitch only occurred on this one Pages file and affected no other applications. I fixed it by duplicating the file, trashing the original and working on the new document. I have no idea of the cause of the problem.
-
Trying to figure out pricing and plan options to add multiple computers to current subscirption. We currently have a subscription that allows the programs on two computers, but now I need 5 computers to be updated with CC. Have looked in to Small Business teams, but do not understand how many computers that is good for and if there is a professor or previous customer discount. Any help would be great, thanks!
Hi,
I presume that the new configuration is missing some parts as you seem to have the IP address of the external interface configured staticly on the interface but you have not configured any default route on the firewall? (Original configuration got default route dynamically and added it to the routing table)
You also mentioned that you were able to connect to the Internet which would indicate there was indeed a default route with the new configuration?
I am a bit confused about the host mask on the external interface (/32 - 255.255.255.255) ? Does the ASA really let you configure a host address on the interface? It can't lead anywhere as there is no next hop with a host mask. I think the ASA even blocks using a /31 mask link network which works with Cisco Routers.
I guess I would go through the basic troubleshooting step when the new configuration is in use
Check logs for any blocked connections or error messages
Check the Static PAT (Port Forward) configuration with the "packet-tracer" command
Capture traffic on the ASAs external interface (with the ASA itself) and confirm that you are seeing the TCP SYN of any connection attempts, or perhaps capture ICMP
- Jouni -
Ive been trying to figure out what my "username" is when a security window pops up for the adobe suite installer. Ive tried my email address, name, etc. I have no problem at all logging
into adobe.com for my account.See https://forums.adobe.com/thread/1619850
-
[solved] trying to figure out BASH configuration files
I am trying to figure out where to properly place commands in the many stated/existing BASH configuration files —reading the wiki and the man page I see there are what at first glance are too many files:
from: http://www.gnu.org/software/bash/manual … rtup-Files
invoked as an interactive login shell or with --login:
1. executes /etc/profile
2. executes-first-one-of-the-following: ~/.bash_profile
2. executes-first-one-of-the-following: ~/.bash_login
2. executes-first-one-of-the-following: ~/.profile
from: https://wiki.archlinux.org/index.php/bash#Configuration
configuration file sourcing order at startup ... by default in arch:
/etc/profile (indirectly) sources /etc/bash.bashrc
/etc/skel/.bash_profile (which users are encouraged to copy to ~/.bash_profile) sources ~/.bashrc
which means that /etc/bash.bashrc and ~/.bashrc will be executed for all interactive shells whether they are login shells or not
It isn't clear to me what exactly means file#1 "indirectly sources" file#2: including ? append target file ? use file#2 instead of file#1 ?
It isn't clear either if ~/.bash_login and/or ~/.bash_logout are ignored (or not) in arch
so /etc/profile should be the (preferred) system-wide configuration file ?
so ~/.bash_profile should be the (preferred) user-specific configuration file ?
If so, does it means I should delete /etc/bash.bashrc (this is where I currently have system-wide commands) in favor of (ie: moving the content to) /etc/profile ?
Last edited by ivanborodin (2014-06-10 16:28:21)First and foremost: thanks for the replies.
Ziusudra wrote:As the Wiki states ...
I am fully aware of what the wiki is stating —I even included the link in my first post. The problem is not that I am not aware of what it is stating, it is just I don't understand it and thus my post to begin with. More precisely; this highlighted line:
Note: /etc/bash.bashrc is non-standard, only some distributions like Arch Linux have this included because packagers have added a -DSYS_BASHRC="/etc/bash.bashrc" flag at compilation time, in order to have a system bashrc file.
which clearly states /etc/bach.bashrc is non-standard was the first hint to me that these files were legacy/going-to-be-deprecated/something-like-this (my assumption) in favor of newer (my assumption) /etc/profile and ~/.bash_profile
Maybe I am asking some obvious question (this is why I am asking it in the newbie corner) but please, have in mind that for someone coming from the Windows world some things/concepts are totally alien at first sight, for eg: in Windows you start Powershell and you have one (only one) place to set your configuration options and the like. Here I am offered with:
• 2 possible system-wide files: /etc/profile and /etc/bash.bashrc
• 2 possible user-specific files: ~/.bash_profile and ~/.bashrc
• 1 possible user-specific files: ~/.bash_login (and ~/.bash_logout)
... so I have (at least) 5 different places to execute commands upon login.
I was carefully reading all the files present on my current installation and now I understand what "indirectly sourced" means: including (if the file is present just insert it here)
I still don't understand what commands should be placed in which file; for eg: system-wide aliases should be placed in /etc/profile or in /etc/bash.bashrc ?
One more time, I am not a rocket-scientist nor I am a dummy, but the wiki just states file precedence without offering any details as best practices or something like that and just figure out: that for such a basic-thing I am getting different answers from two users (someone with 6000+ posts) ... either one: or the wiki is not clear or this thing is a little more complex than it seems at first sight ... just my thought.
Anyway, needless to say, thank you both for your time and patience.
Maybe you are looking for
-
Need an enable/disable Labview VI for SC-2062 relay board using PCI-6503 DAQ Card.
I am using Labview 6i, and I need to write an enable/disable VI that will enable and disable 6 of the 8 relays at any time while keeping the whole vi running. Therefore one or more positions may be changed at a time, but positions that don't change c
-
Select options and internal table
Hi, I have requirement for which I was coding... On the selction screen, I have an object field... say I have multiple values like 101, 102, 103 select-options: s_3 for hrp1000-objid. i_1001 type standard table of HRP1001 with header line i_temp_100
-
HI, I've first installed CC in English (USA) but my oSX is in french so the keyboard shortcuts never worked. I've tried in the CC app preferences panel to choose french but everytime it starts the apps in demo mode and ask me a serial number. How can
-
I just bought my HP spectre XT 13-2004TU with 256GB of solid state drive. I was not able to do any additional partition for my data, as it was already partition with three primary drives and one logical drive. After making several attempts by shrinki
-
Is this output of mounted.ocfs2 -f right?
Hi, I'm wondering if my output of mounted.ocfs2 -f is right. I have 8 servers and 1 VM Master, each server has 1-3 disks for the shared storage, using extended iscsi storage. I am wondering, don't all the servers need to be listed in "Nodes" with thi