Trying to get a printer working

I'm trying to install an hp 920c (or an hp 960c, but it doesn't work great in windows either).
I go to follow the directions in the wiki, and I can never find an messages in the logs regarding USB. I know the USB works and is plugged in correctly, as it goes great in windows. Hotplug is up and running, and recognizing USB as far as I can tell. Where do I go from here?
Thanks,
Dustin

hypermegachi wrote:
give the CUPS tutorial in the wiki a try.
http://wiki.archlinux.org/index.php/CUPS%20setup
neocephas wrote:follow the rest of the wiki.
yak8998 wrote:I go to follow the directions in the wiki,
Mmmmm, yeaeh
I DO have a /dev/usb/lp0 node though

Similar Messages

Tried both ways in the Wiki, still can't get network printing work

Hi,
I have tried both the client and server ways following the Wiki, still could not get network printing work.
For the first way, I tried to put either the host name or the ip address (starting with 192) of the remote printer into /etc/cups/client.conf. But both Okular and Evince failed to see the printer in the dialog.
For the second way, with cups-browsed running, it only managed to discover printers in my local network (ip starting with 137) which I have no access. I tried to manually add the printer using its ip, but it still did not work.
What can I do? I have spent hours trying to work it out but failed. I would appreciate a lot your help. Thanks.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.

I am trying to get my printer to work.

I am trying to get my printer to work. It is a Canon MP240, it does not show up in the printers menu. Though it is plugged in via USB.

This printer does have a driver available via Software Update, meaning that when you connect the printer to the Mac via USB cable the driver should be downloaded and installed automatically for you. Of course this will not occur if the Mac cannot detect the printer at the end of the cable. So if you open Print & Scan, select to Add and the MP240 is not shown in the Default Add Printer view then there could be a problem with the USB cable or with the printer.
To double-check if the printer can be seen by the Mac, open System Information and under the Hardware entry in the sidebar, select USB. Then in the top right pane you will see all the USB connections on your Mac and what is currently connected to them. If the MP240 is not shown, then try moving the cable to a different USB port on the Mac. And don't use a USB hub or the USB port on the keyboard. If moving doesn't help the printer appear under one of the USB busses, then try a different USB cable. If that still doesn't help, turn off the power to the printer and unplug the power cord for 10 minutes before reconnecting and turning it back on.

Trying to get home shaing working on apple tv using Cisco Access points and a Cisco WLC 5508 with 7.2.110 code. I can get devices working individually but they never see each other. I can ping the apple tv from my laptop and ipad.

Trying to get home sharing working on a corporate wireless network. Cisco wireless.
WLC5508 controller
Cisco 3502 access points
All apple devices on same WLAN - security WPA2-PSK
ITunes account up to date
All devices laterst software.
Can ping apll tv from laptop
can ping apple tv from ipad
Can ping ipad from laptop
can ping laptop from ipad.
Apple tv never sees any other device.
Any ideas?

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

I have a Power Mac G4 and i am trying to get it to work with my LCD

I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

Trying to get my printer connected to wireless

I am trying to get my printer setup to be able to print wireless.

Hello, and Welcome to the HP Support Community!
In order to help you, we need information!
-- What printer are you asking about?
-- Will you be connecting it to your home wifi network?
-- What will you be printing from? A computer, tablet, or laptop?
Have you run the installation disk included with the printer, and choose "wireless" as the method of connection?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Just trying to get the basics working...

Hi,
I have been trying to get just the basics working, and have spent almost all day, and now into the night, trying to get it to work....with no logical sucess.....
All I am trying to do, using VB.net 2008 with Crystral Reports 2008, is to disply my report on a web page using the crystalreport viewer in Visual Studio.
I created a report in CR2008, and during the process of creating the report I had to create a connection to the SQL Server 2005 database and set a parameter on my report to show the data for a single record from the database.
The issue is that the connection string I use in CR2008 is NOT the connection string that is to be used in the browser, so the first task I have attempted to do is to set new log in details for the report. I just want to use a trusted connection.
I have searched high and low on the internet, and taken a look at the samples provided on this site.
My code, as it is at the moment for setting the connection for the report at run time is at the end of this email: ( I got this code from the samples on this site)
The problem I have is if the integratedsecurity set to true(as I need it) then the myconnectioninfo.servername and database name are totally ignored. I have changed them to be just randon characters, which should result in the report not being able to connect, yet the report still works fine.
No errors are generated at all, so its very confusing. I know the code is being executed via breakpoints and stepping through the code, but it would seem that it makes no difference.
What am I doing wrong here.....
Private Sub ConfigureCrystalReports()
        Dim reportPath As String = Server.MapPath("CrystalReport1.rpt")
        myCrystalReportViewer.ReportSource = reportPath
        Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        SetDBLogonForReport(myConnectionInfo)
        myConnectionInfo.ServerName = "SQL1"
        myConnectionInfo.DatabaseName = "MPx
        ' myConnectionInfo.UserID = "limitedPermissionAccount"
        'myConnectionInfo.Password = "1234"
        myConnectionInfo.IntegratedSecurity = True
    End Sub
    Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
        ConfigureCrystalReports()
    End Sub
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo)
        Dim myTableLogOnInfos As TableLogOnInfos = myCrystalReportViewer.LogOnInfo
        For Each myTableLogOnInfo As TableLogOnInfo In myTableLogOnInfos
            myTableLogOnInfo.ConnectionInfo = myConnectionInfo
        Next
    End Sub

Hi,
Couple of things:
1) Please make sure that you are using CR2008 with SP0 at least. Dlls versions should be 12.0.2000.0 and File version 12.0.1100.0.
2) Please make sure that the destination database can be accessed from that machine. You can create a UDL file or a new report hitting the target database to see if we can see data into it.
3) Please make sure that we are not changing the schema of the report.
4) Can you try this code mentioned below:
ConnectionInfo crConnection = new ConnectionInfo();
               crConnection.ServerName="Server";
               crConnection.DatabaseName="DB";
               crConnection.UserID="uid";
               crConnection.Password="pwd";
                        crConnection.IntegratedSecurity=true;
               crReport.Load(Server.MapPath("CrystalReport1.rpt"));
               Tables crTables=crReport.Database.Tables;
               foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
                    TableLogOnInfo crTLOI = crTable.LogOnInfo;
                    crTLOI.ConnectionInfo=crConnection;
                    crTable.ApplyLogOnInfo(crTLOI);
                    crTable.Location=Database.Owner.Tablename
               CrystalReportViewer1.ReportSource=crReport;
Regards,
AG.

Trying to get video chat working between mac and pc

im trying to get video chat working between a mac and pc
pc-running xp with aim 6.0
will updating to aim 6.1 fix this ?
we can text chat with no problem
we can not audio or video chat
any help would be great
thanks santini

Hi Z,
Lets check the Port Forwarding at your end.
Does this Zyxel have UPnP at all ?
If so use that and disable the Port Forwarding.
If not then these ports need to be forwarded.
I will list with Protocols as some device need these.
TCP 5190 for AIM Login and text chats (can be substituted for 443)
TCP 5220, 5222 and 5223 for Jabber (the last is for OS X servers and GoogleTalk)
TCP 5298 this is part of the Bonjour set up for iChat if you have other Macs
UDP 5060 this is for the SIP negotiation that iChat needs
UDP 5678 this is where the visible invites come and go out on.
UDP 5190 for AIM file sending and Group chats
UDP 16384-16403 This group of 20 ports is where any Audio or Video chat takes place.
As the 443 port is below 1024 (the NAT threshold) you should not have to Forward this.
10:23 PM Monday; August 13, 2007

Trying to get " url " to work in my scroller/ gallery...

trying to get " url " to work in my scroller/ gallery...
please take a look at my action script and xml... ive got all
the fields working except for the " url " ... what adjustments do i
need to make to get the url for each pix to work...
thanks...trey
delay = 3000;
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
image = [];
title = [];
headline = [];
description = [];
total = xmlNode.childNodes.length;
for (i=0; i<total; i++) {
image
= xmlNode.childNodes.childNodes[0].firstChild.nodeValue;
title
= xmlNode.childNodes.childNodes[1].firstChild.nodeValue;
headline
= xmlNode.childNodes.childNodes[2].firstChild.nodeValue;
description
= xmlNode.childNodes.childNodes[3].firstChild.nodeValue;
firstImage();
} else {
content = "file not loaded!";
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("images.xml");
p = 0;
this.onEnterFrame = function() {
filesize = picture.getBytesTotal();
loaded = picture.getBytesLoaded();
preloader._visible = true;
if (loaded != filesize) {
preloader.preload_bar._xscale = 100*loaded/filesize;
} else {
preloader._visible = false;
if (picture._alpha<100) {
picture._alpha += 10;
function nextImage() {
if (p<(total-1)) {
p++;
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[p], 1);
title_txt.text = title[p];
headline_txt.text = headline[p];
description_txt.text = description[p];
picture_num();
slideshow();
function prevImage() {
if (p>0) {
p--;
picture._alpha = 0;
picture.loadMovie(image[p], 1);
title_txt.text = title[p];
headline_txt.text = headline[p];
description_txt.text = description[p];
picture_num();
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[0], 1);
title_txt.text = title[p];
headline_txt.text = headline[p];
description_txt.text = description[p];
picture_num();
slideshow();
function picture_num() {
current_pos = p+1;
pos_txt.text = current_pos+" / "+total;
function slideshow() {
myInterval = setInterval(pause_slideshow, delay);
function pause_slideshow() {
clearInterval(myInterval);
if (p == (total-1)) {
p = 0;
firstImage();
} else {
nextImage();
and here is my xml...
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<images>
<pic>
<image>sample1.jpg</image>
<title>Google</title>
<headline>headline 1</headline>
<description>this is the description of article
1.</description>
<link>
http://www.google.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
<pic>
<image>sample2.jpg</image>
<caption>Yahoo</caption>
<headline>headline 2</headline>
<description>this is the description of article
2.</description>
<link>
http://www.yahoo.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
<pic>
<image>sample3.jpg</image>
<caption>BAS-llc</caption>
<headline>headline 3</headline>
<description>this is the description of article
3.</description>
<link>
http://www.bas-llc.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
<pic>
<image>sample4.jpg</image>
<caption>USC Trojans</caption>
<headline>headline 4</headline>
<description>this is the description of article
4.</description>
<link>
http://www.uscripsit.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
</images>

Extensions that do not have a "Remove" button are installed by other software and are not under control of the Firefox extension manager.
Such globally installed extensions are usually found via a registry scan or are installed in a location that Firefox scans for installed extensions.
*https://developer.mozilla.org/Installing_extensions
*https://developer.mozilla.org/Adding_Extensions_using_the_Windows_Registry
Extensions installed this way need to be removed via the settings (options/preferences) of the program that has added this extension or this program has to be uninstalled via "Control Panel > Programs".
In Firefox you an only disable such an extension.
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Trying to get affinetransform to work in my code

Hello,
I am trying to get affinetransform to work in my applet. Can somebody help me figure it out. My code is below. I commented out some code because I was not sure of whether I shoud erase it or not because the affine transform works in the commented out code.
Good luck:
import java.lang.Integer;
import java.awt.*;
import java.awt.event.*;
import java.awt.font.*;
import java.awt.geom.*;
import java.awt.image.*;
import java.awt.event.ItemListener;
import java.awt.event.ItemEvent;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.*;
import java.awt.Graphics.*;
import javax.swing.*;
import java.awt.*;
import javax.swing.text.*;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.JApplet.*;
import javax.swing.JFrame.*;
import java.applet.Applet;
import javax.swing.border.*;
import javax.swing.Spring.*;
import java.awt.geom.AffineTransform;
import java.awt.Graphics2D;
//Class definition
public class Shapeshift extends JApplet{
private int x;
private int a;
private int b;
private int c;
private int dd;
private int q;
private int f;
private int z;
int hhh = 700;
int wwww = 700;
int www = 350;
int y = 300;
int g= 5;
int w = 20;
int h = 10;
int panelheight = 100;
int panelwidth = 540;
//Text
int ty = 20;
int tx = 10;
int twid = 40;
int thei = 20;
int bwid = 50;
int bhei = 20;
int ly = 2;
//Defining textfields
JTextField Lfield = new JTextField(5);
JTextField Rfield = new JTextField(5);
JTextField rfield = new JTextField(5);
JTextField Hfield = new JTextField(5);
JTextField tfield = new JTextField(5);
JTextField hfield = new JTextField(5);
JTextField lfield = new JTextField(5);
JLabel Llabel = new JLabel("L");
JLabel Rlabel = new JLabel("R");
JLabel rlabel = new JLabel("r");
JLabel llabel = new JLabel("l");
JLabel tlabel = new JLabel("t");
JLabel Hlabel = new JLabel("H");
JLabel hlabel = new JLabel("h");
/*public void paint(Graphics g) {
super.paint(g);
Graphics2D g2 = (Graphics2D) g;
Dimension d = getSize();
int ww = 350;
int w = d.width;
int h = d.height;
int c = (int)(Integer.parseInt(Rfield.getText())) + (int)(Integer.parseInt(tfield.getText())) + 1;
int z = 1 + (int)(Integer.parseInt(hfield.getText())) + (int)(Integer.parseInt(Rfield.getText()));
int xx = 1 + (int)(Integer.parseInt(hfield.getText())) + (int)(Integer.parseInt(Rfield.getText())) + (int)(Integer.parseInt(tfield.getText()));
int xxx = 1 + (int)(Integer.parseInt(rfield.getText())) + (int)(Integer.parseInt(Rfield.getText()));
AffineTransform saveXform = g2.getTransform();
AffineTransform toCenterAt = new AffineTransform();
toCenterAt.translate(w/2, h/2);
g2.transform(toCenterAt);
g2.setColor(Color.yellow);
g2.fillRect(-25, -30-z, 25+x, 10+f);
g2.fillRect(-25, 70+a, 25+x, 10+f);
g2.fillRect(50-x, -30-z, 25+x, 10+f);
g2.fillRect(50-x, 70+a, 25+x, 10+f);
g2.setColor(Color.blue);
g2.fillRect(-25, -40-xx, 100, 10 + dd);
g2.fillRect(-25, 80+z, 100, 10+dd);
g2.setColor(Color.gray);
g2.fillRect(x, 0+q, 50 - (2*x), 50-(2*q));
g2.fillRect(-25, -20-a, x + 25, 90+(2*a));
g2.fillRect(50-x, -20-a, 25+x, 90+(2*a));
g2.drawLine(90, 25, 90, -20 - a);
g2.drawLine(-30, 15-b, 90, 15-b);
g2.drawLine(-30, 40+b, 90, 40+b);
g2.drawLine(100, 25, 100, -5);
repaint();
public void init() {
class MyDrawingPanel extends JPanel{
public void paintComponent(Graphics g){
super.paintComponent(g);
Graphics2D g2 = (Graphics2D) g;
Dimension d = getSize();
int ww = 350;
int hh = 350;
int w = d.width;
int h = d.height;
int c = (int)(Integer.parseInt(Rfield.getText())) + (int)(Integer.parseInt(tfield.getText())) + 1;
int z = 1 + (int)(Integer.parseInt(hfield.getText())) + (int)(Integer.parseInt(Rfield.getText()));
int xx = 1 + (int)(Integer.parseInt(hfield.getText())) + (int)(Integer.parseInt(Rfield.getText())) + (int)(Integer.parseInt(tfield.getText()));
int xxx = 1 + (int)(Integer.parseInt(rfield.getText())) + (int)(Integer.parseInt(Rfield.getText()));
AffineTransform saveXform = g2.getTransform();
AffineTransform toCenterAt = new AffineTransform();
toCenterAt.translate(w/2, h/2);
g2.transform(toCenterAt);
g2.setColor(Color.yellow);
g2.fillRect(-25, -30-z, 25+x, 10+f);
g2.fillRect(-25, 70+a, 25+x, 10+f);
g2.fillRect(50-x, -30-z, 25+x, 10+f);
g2.fillRect(50-x, 70+a, 25+x, 10+f);
g2.setColor(Color.blue);
g2.fillRect(-25, -40-xx, 100, 10 + dd);
g2.fillRect(-25, 80+z, 100, 10+dd);
g2.setColor(Color.gray);
g2.fillRect(x, 0+q, 50 - (2*x), 50-(2*q));
g2.fillRect(-25, -20-a, x + 25, 90+(2*a));
g2.fillRect(50-x, -20-a, 25+x, 90+(2*a));
g2.drawLine(90, 25, 90, -20 - a);
g2.drawLine(-30, 15-b, 90, 15-b);
g2.drawLine(-30, 40+b, 90, 40+b);
g2.drawLine(100, 25, 100, -5);
repaint();
// other drawing/painting code here
MyDrawingPanel mdp = new MyDrawingPanel();
getContentPane().add(mdp, java.awt.BorderLayout.CENTER);
//Defining panels
JPanel dimension = new JPanel();
JPanel dimension1 = new JPanel();
//Setting initial text values to zero
int start = 0;
Lfield.setText(start + "");
Rfield.setText(start + "");
rfield.setText(start + "");
lfield.setText(start + "");
tfield.setText(start + "");
Hfield.setText(start + "");
hfield.setText(start + "");
//Setting up SpringLayout
SpringLayout spring = new SpringLayout();
SpringLayout spring2 = new SpringLayout();
Container c = getContentPane();
c.setLayout(spring);
Spring hhhheight = Spring.constant(hhh);
Spring wwwidth = Spring.constant(wwww);
Spring wwidth = Spring.constant(www);
Spring width = Spring.constant(w);
Spring height = Spring.constant(h);
Spring xvalue = Spring.constant(g);
Spring yvalue = Spring.constant(y);
Spring xxvalue = spring.getConstraint(SpringLayout.WEST, c);
Spring yyvalue = spring.getConstraint(SpringLayout.SOUTH, c);
//Panel 1 parameters
Spring panwidthr = spring.getConstraint(SpringLayout.EAST, c);
Spring panheight = Spring.constant(panelheight);
Spring panwidth = Spring.sum(panwidthr, Spring.minus(xvalue));
Spring ypandisp = Spring.sum(yyvalue, Spring.minus(Spring.sum(xvalue,panheight)));
Spring dxvalue = spring2.getConstraint(SpringLayout.WEST, dimension);
Spring dyvalue = spring2.getConstraint(SpringLayout.NORTH, dimension);
//text parameters
Spring txx = Spring.constant(tx);
Spring tyy = Spring.constant(ty);
Spring twidth = Spring.constant(twid);
Spring theight = Spring.constant(thei);
//button parameters
JButton up = new JButton();
Spring b1x = Spring.sum(txx,twidth);
Spring b1width = Spring.constant(bwid);
Spring b1height = Spring.constant(bhei);
Spring b1y = Spring.sum(tyy,b1height);
Spring b2x = Spring.sum(b1x, Spring.sum(b1x,b1width));
//text1 x position
Spring t1xx = Spring.sum(b2x,Spring.minus(twidth));
Spring t3x = Spring.sum(b2x, Spring.sum(txx,b1width));
Spring b3x = Spring.sum(t3x,twidth);
Spring t4x = Spring.sum(b3x,Spring.sum(txx,b1width));
Spring b4x = Spring.sum(b3x,Spring.sum(b1x,b1width));
Spring t5x = Spring.sum(b4x,Spring.sum(txx,b1width));
Spring b5x = Spring.sum(b4x,Spring.sum(b1x,b1width));
Spring t6x = Spring.sum(b5x,Spring.sum(txx,b1width));
Spring b6x = Spring.sum(b5x,Spring.sum(b1x,b1width));
Spring t7x = Spring.sum(b6x,Spring.sum(txx,b1width));
Spring b7x = Spring.sum(b6x,Spring.sum(b1x,b1width));
//Label parameters
Spring lyy = Spring.constant(ly);
//Adding features to panel
TitledBorder dampdim = new TitledBorder("Damper Dimensions");
dimension.setBorder(dampdim);
dimension.setLayout(spring2);
TitledBorder dampdimm = new TitledBorder("Damper Dimensions");
mdp.setBorder(dampdimm);
//Adding features to L up button
up.setText("UP");
up.setFont( new Font( "UP", Font.BOLD, 2));
up.addActionListener(new T1C());
//Defining buttons(in an array)
JButton buttons[] = new JButton[14];
buttons[0] = new JButton("UP");
buttons[1] = new JButton("DOWN");
buttons[2] = new JButton("UP");
buttons[3] = new JButton("DOWN");
buttons[4] = new JButton("UP");
buttons[5] = new JButton("DOWN");
buttons[6] = new JButton("UP");
buttons[7] = new JButton("DOWN");
buttons[8] = new JButton("UP");
buttons[9] = new JButton("DOWN");
buttons[10] = new JButton("UP");
buttons[11] = new JButton("DOWN");
buttons[12] = new JButton("UP");
buttons[13] = new JButton("DOWN");
buttons[1].addActionListener(new T2C());
buttons[2].addActionListener(new T3C());
buttons[3].addActionListener(new T4C());
buttons[4].addActionListener(new T5C());
buttons[5].addActionListener(new T6C());
buttons[6].addActionListener(new T7C());
buttons[7].addActionListener(new T8C());
buttons[8].addActionListener(new T9C());
buttons[9].addActionListener(new T10C());
buttons[10].addActionListener(new T11C());
buttons[11].addActionListener(new T12C());
buttons[12].addActionListener(new T13C());
buttons[13].addActionListener(new T14C());
//Component positioning
c.add(dimension);
spring.getConstraints(dimension).setX(xvalue);
spring.getConstraints(dimension).setY(ypandisp);
spring.getConstraints(dimension).setWidth(panwidth);
spring.getConstraints(dimension).setHeight(panheight);
c.add(dimension1);
spring.getConstraints(dimension1).setX(xvalue);
spring.getConstraints(dimension1).setY(theight);
spring.getConstraints(dimension1).setWidth(panwidth);
spring.getConstraints(dimension1).setHeight(hhhheight);
dimension.add(Lfield);
spring2.getConstraints(Lfield).setX(txx);
spring2.getConstraints(Lfield).setY(tyy);
spring2.getConstraints(Lfield).setWidth(twidth);
spring2.getConstraints(Lfield).setHeight(theight);
dimension.add(up);
spring2.getConstraints(up).setX(b1x);
spring2.getConstraints(up).setY(tyy);
spring2.getConstraints(up).setWidth(b1width);
spring2.getConstraints(up).setHeight(b1height);
dimension.add(buttons[1]);
spring2.getConstraints(buttons[1]).setX(b1x);
spring2.getConstraints(buttons[1]).setY(b1y);
spring2.getConstraints(buttons[1]).setWidth(b1width);
spring2.getConstraints(buttons[1]).setHeight(b1height);
dimension.add(Rfield);
spring2.getConstraints(Rfield).setX(t1xx);
spring2.getConstraints(Rfield).setY(tyy);
spring2.getConstraints(Rfield).setWidth(twidth);
spring2.getConstraints(Rfield).setHeight(theight);
dimension.add(buttons[2]);
spring2.getConstraints(buttons[2]).setX(b2x);
spring2.getConstraints(buttons[2]).setY(tyy);
spring2.getConstraints(buttons[2]).setWidth(b1width);
spring2.getConstraints(buttons[2]).setHeight(b1height);
dimension.add(buttons[3]);
spring2.getConstraints(buttons[3]).setX(b2x);
spring2.getConstraints(buttons[3]).setY(b1y);
spring2.getConstraints(buttons[3]).setWidth(b1width);
spring2.getConstraints(buttons[3]).setHeight(b1height);
dimension.add(rfield);
spring2.getConstraints(rfield).setX(t3x);
spring2.getConstraints(rfield).setY(tyy);
spring2.getConstraints(rfield).setWidth(twidth);
spring2.getConstraints(rfield).setHeight(theight);
dimension.add(buttons[4]);
spring2.getConstraints(buttons[4]).setX(b3x);
spring2.getConstraints(buttons[4]).setY(tyy);
spring2.getConstraints(buttons[4]).setWidth(b1width);
spring2.getConstraints(buttons[4]).setHeight(b1height);
dimension.add(buttons[5]);
spring2.getConstraints(buttons[5]).setX(b3x);
spring2.getConstraints(buttons[5]).setY(b1y);
spring2.getConstraints(buttons[5]).setWidth(b1width);
spring2.getConstraints(buttons[5]).setHeight(b1height);
dimension.add(lfield);
spring2.getConstraints(lfield).setX(t4x);
spring2.getConstraints(lfield).setY(tyy);
spring2.getConstraints(lfield).setWidth(twidth);
spring2.getConstraints(lfield).setHeight(theight);
dimension.add(buttons[6]);
spring2.getConstraints(buttons[6]).setX(b4x);
spring2.getConstraints(buttons[6]).setY(tyy);
spring2.getConstraints(buttons[6]).setWidth(b1width);
spring2.getConstraints(buttons[6]).setHeight(b1height);
dimension.add(buttons[7]);
spring2.getConstraints(buttons[7]).setX(b4x);
spring2.getConstraints(buttons[7]).setY(b1y);
spring2.getConstraints(buttons[7]).setWidth(b1width);
spring2.getConstraints(buttons[7]).setHeight(b1height);
dimension.add(tfield);
spring2.getConstraints(tfield).setX(t5x);
spring2.getConstraints(tfield).setY(tyy);
spring2.getConstraints(tfield).setWidth(twidth);
spring2.getConstraints(tfield).setHeight(theight);
dimension.add(buttons[8]);
spring2.getConstraints(buttons[8]).setX(b5x);
spring2.getConstraints(buttons[8]).setY(tyy);
spring2.getConstraints(buttons[8]).setWidth(b1width);
spring2.getConstraints(buttons[8]).setHeight(b1height);
dimension.add(buttons[9]);
spring2.getConstraints(buttons[9]).setX(b5x);
spring2.getConstraints(buttons[9]).setY(b1y);
spring2.getConstraints(buttons[9]).setWidth(b1width);
spring2.getConstraints(buttons[9]).setHeight(b1height);
dimension.add(Hfield);
spring2.getConstraints(Hfield).setX(t6x);
spring2.getConstraints(Hfield).setY(tyy);
spring2.getConstraints(Hfield).setWidth(twidth);
spring2.getConstraints(Hfield).setHeight(theight);
dimension.add(buttons[10]);
spring2.getConstraints(buttons[10]).setX(b6x);
spring2.getConstraints(buttons[10]).setY(tyy);
spring2.getConstraints(buttons[10]).setWidth(b1width);
spring2.getConstraints(buttons[10]).setHeight(b1height);
dimension.add(buttons[11]);
spring2.getConstraints(buttons[11]).setX(b6x);
spring2.getConstraints(buttons[11]).setY(b1y);
spring2.getConstraints(buttons[11]).setWidth(b1width);
spring2.getConstraints(buttons[11]).setHeight(b1height);
dimension.add(hfield);
spring2.getConstraints(hfield).setX(t7x);
spring2.getConstraints(hfield).setY(tyy);
spring2.getConstraints(hfield).setWidth(twidth);
spring2.getConstraints(hfield).setHeight(theight);
dimension.add(buttons[12]);
spring2.getConstraints(buttons[12]).setX(b7x);
spring2.getConstraints(buttons[12]).setY(tyy);
spring2.getConstraints(buttons[12]).setWidth(b1width);
spring2.getConstraints(buttons[12]).setHeight(b1height);
dimension.add(buttons[13]);
spring2.getConstraints(buttons[13]).setX(b7x);
spring2.getConstraints(buttons[13]).setY(b1y);
spring2.getConstraints(buttons[13]).setWidth(b1width);
spring2.getConstraints(buttons[13]).setHeight(b1height);
dimension.add(Llabel);
spring2.getConstraints(Llabel).setX(txx);
spring2.getConstraints(Llabel).setY(lyy);
spring2.getConstraints(Llabel).setWidth(twidth);
spring2.getConstraints(Llabel).setHeight(theight);
dimension.add(Rlabel);
spring2.getConstraints(Rlabel).setX(t1xx);
spring2.getConstraints(Rlabel).setY(lyy);
spring2.getConstraints(Rlabel).setWidth(twidth);
spring2.getConstraints(Rlabel).setHeight(theight);
dimension.add(rlabel);
spring2.getConstraints(rlabel).setX(t3x);
spring2.getConstraints(rlabel).setY(lyy);
spring2.getConstraints(rlabel).setWidth(twidth);
spring2.getConstraints(rlabel).setHeight(theight);
dimension.add(llabel);
spring2.getConstraints(llabel).setX(t4x);
spring2.getConstraints(llabel).setY(lyy);
spring2.getConstraints(llabel).setWidth(twidth);
spring2.getConstraints(llabel).setHeight(theight);
dimension.add(tlabel);
spring2.getConstraints(tlabel).setX(t5x);
spring2.getConstraints(tlabel).setY(lyy);
spring2.getConstraints(tlabel).setWidth(twidth);
spring2.getConstraints(tlabel).setHeight(theight);
dimension.add(Hlabel);
spring2.getConstraints(Hlabel).setX(t6x);
spring2.getConstraints(Hlabel).setY(lyy);
spring2.getConstraints(Hlabel).setWidth(twidth);
spring2.getConstraints(Hlabel).setHeight(theight);
dimension.add(hlabel);
spring2.getConstraints(hlabel).setX(t7x);
spring2.getConstraints(hlabel).setY(lyy);
spring2.getConstraints(hlabel).setWidth(twidth);
spring2.getConstraints(hlabel).setHeight(theight);
//end of init()
//Event Handlers for buttons
class T1C implements ActionListener
public void actionPerformed(ActionEvent e) {
x = (int)(Integer.parseInt(Lfield.getText())) + 1;
Lfield.setText(x + "");
class T2C implements ActionListener
public void actionPerformed(ActionEvent e) {
x = (int)(Integer.parseInt(Lfield.getText())) - 1;
Lfield.setText(x + "");
class T3C implements ActionListener
public void actionPerformed(ActionEvent e) {
a = (int)(Integer.parseInt(Rfield.getText())) + 1;
Rfield.setText(a + "");
class T4C implements ActionListener
public void actionPerformed(ActionEvent e) {
a = (int)(Integer.parseInt(Rfield.getText())) - 1;
Rfield.setText(a + "");
class T5C implements ActionListener
public void actionPerformed(ActionEvent e) {
b = (int)(Integer.parseInt(rfield.getText())) + 1;
rfield.setText(b + "");
class T6C implements ActionListener
public void actionPerformed(ActionEvent e) {
b = (int)(Integer.parseInt(rfield.getText())) - 1;
rfield.setText(b + "");
class T7C implements ActionListener
public void actionPerformed(ActionEvent e) {
c = (int)(Integer.parseInt(lfield.getText())) + 1;
lfield.setText(c + "");
class T8C implements ActionListener
public void actionPerformed(ActionEvent e) {
c = (int)(Integer.parseInt(lfield.getText())) - 1;
lfield.setText(c + "");
class T9C implements ActionListener
public void actionPerformed(ActionEvent e) {
dd = (int)(Integer.parseInt(tfield.getText())) + 1;
tfield.setText(dd + "");
class T10C implements ActionListener
public void actionPerformed(ActionEvent e) {
dd = (int)(Integer.parseInt(tfield.getText())) - 1;
tfield.setText(dd + "");
class T11C implements ActionListener
public void actionPerformed(ActionEvent e) {
q = (int)(Integer.parseInt(Hfield.getText())) + 1;
Hfield.setText(q + "");
class T12C implements ActionListener
public void actionPerformed(ActionEvent e) {
q = (int)(Integer.parseInt(Hfield.getText())) - 1;
Hfield.setText(q + "");
class T13C implements ActionListener
public void actionPerformed(ActionEvent e) {
f = (int)(Integer.parseInt(hfield.getText())) + 1;
hfield.setText(f + "");
class T14C implements ActionListener
public void actionPerformed(ActionEvent e) {
f = (int)(Integer.parseInt(hfield.getText())) - 1;
hfield.setText(f + "");
public static void main( String[] argv ) {
JFrame frame = new JFrame( "Transform" );
frame.addWindowListener( new WindowAdapter(){
public void windowClosing( WindowEvent e ){
System.exit( 0 );
JApplet applet = new Shapeshift();
frame.getContentPane().add( BorderLayout.CENTER, applet );
applet.init();
frame.setSize( 800, 700 );
frame.setVisible(true);
}

I see a lot of applet code and little that has to do with affine transformations.
Separate the UI from what you're trying to do. Once you have it working perfectly on a command line with simple text input and output, then worry about the applet.
%

Trying to get PM to work with our upgrade process

We are trying to get Personality migration working properly in our
environment to migrate our users from 2000 to XP. We have been able to
get the files to migrate properly, but are having issues with the
application settings. We have installed PM from Zenworks 7 which is the
Computer Associates version. When we are setting up the template in the
application area, there does not seem to be anything there. For example,
how do we set PM to gather the IE settings but not gather the proxy
settings? Also, where would I find better documentation on this product?
THanks in advance for any help.
Brian

Brian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Just upgraded my Mac laptop to Lion to take advantage of iCloud, spent hours trying to get iCloud to work, no happy

Just upgraded my Mac laptop to Lion to take advantage of iCloud, spent hours trying to get iCloud to work, not happy, tried everything still does not work, this is the first time i have been defeated.

The initial upgrade from Snow Leopard to Lion is 10.7.1. Have you done the system update to 10.7.2 already?
And since there isn't any general overview of what you've tried, see if anything at this site will help" http://help.apple.com/icloud/index.html#

HT204291 Don't bother trying to get Airplay to work even if you have all the latest updates etc..if your computer is a MacBook Pro 2008 or earlier..The Apple staff have decided they are too old and not worth supporting...

Don't bother trying to get Airplay to work even if you have all the latest updates etc..if your computer is a MacBook Pro 2008 or earlier..The Apple staff have decided they are too old and not worth supporting...

AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.
Patrick is either mistaken or describing basic airplay and not mirroring.

Trying to get a printer working

Similar Messages

Maybe you are looking for