Trying to link VC++ and CVI

I have a VC++ application that uses CVI components. It links fine when VC++ is in debug mode, but when I change to Release mode I get link errors.
C:\Program Files\Microsoft Visual Studio\VC98\INCLUDE\mbstring.h(117) : error C2375: 'CVI__mbsbtype' : redefinition; different linkage
C:\Program Files\National Instruments\MeasurementStudio\CVI\include\mbsupp.h(73) : see declaration of 'CVI__mbsbtype'
I looked up the error on MSDN site and it means that a different linkage specified was being used such as static vs. extern.
VC++ uses the following -- CRTIMP int __cdecl _mbsbtype(const unsigned char *, size_t);
CVI uses the following -- int CVIANSI _mbsbtype(const unsigned char *, size_t);
I am including "toolbox.h" and <
afxwin.h> , ,
Any help would be greatly appreciated.
thanks,
Lorrie Smith
[email protected]

Hi Lorrie,
The VC++ compiler needs to know where the CVI include files are. I'm not sure if you have already done this, but when using CVI libraries, the project settings/C++ tab needs to have the following Additional Include Directories:
C:\Program Files\National Instruments\CVI\\include,
C:\Program Files\National Instruments\CVI\\instr,
C:\Program Files\National Instruments\CVI\\toolslib,
C:\Program Files\National Instruments\CVI\\toolslib\custctrl,
C:\Program Files\National Instruments\CVI\\toolslib\custctrl\custsupp,
C:\Program Files\National Instruments\CVI\\toolslib\localui,
C:\Program Files\National Instruments\CVI\\toolslib\printing,
C:\Program Files\National Instruments\CVI\\toolslib\reportgen,
C:\Program Files\National Instruments\CVI\\tools
lib\toolbox
Also, in the Project Settings (Link >> Input tab) you should have the following library modules listed:
"C:\Program Files\National Instruments\CVI\\extlib\analysis.lib"
"C:\Program Files\National Instruments\CVI\\extlib\cvi_lvrt.lib"
"C:\Program Files\National Instruments\CVI\\extlib\cviauto.lib"
"C:\Program Files\National Instruments\CVI\\extlib\cvisupp.lib"
"C:\Program Files\National Instruments\CVI\\extlib\cviwmain.lib"
"C:\Program Files\National Instruments\CVI\\extlib\dataskt.lib"
"C:\Program Files\National Instruments\CVI\\extlib\easyio.lib"
"C:\Program Files\National Instruments\CVI\\extlib\fpcustom.lib"
"C:\Program Files\National Instruments\CVI\\extlib\gpib.lib"
"C:\Program Files\National Instruments\CVI\\extlib\nivxi.lib"
"C:\Program Files\National Instruments\CVI\\extlib\visa.lib"
"C:\Program Files\National Instruments\CVI\\extlib\cvirt.lib"
kernel32.lib user32.lib gdi32.lib advapi32.lib
Note that this is an exhaustive
list and you might want to delete some files if you're only using toolbox functions.
Let me know if that doesn't solve the link error.
Regards,
Azucena

Similar Messages

Trying to link bestbuy and my.bestbuy

Under my account at bestbuy.com it asked me to verify my.bestbuy information. I enter my phone number then it says I need to verify my email. The email never comes, even after resending it twice now. I started the process over 6 hours ago.
I have checked my spam folder, and even added the bestbuy domain to my approved senders. I know there are 2 active accounts for the member id. They have 2 separate names (which the FAQ says they can't be merged).
The my.bestbuy.com site also will not let me login without doing the verification process.

Hi ChristopherHagen,
Welcome to the Best Buy forum, and thank you for posting.
A My Best Buy account can only be linked to a single BestBuy.com account, and if a My Best Buy account is already linked to another BestBuy.com account, then that would explain why you are not receiving the verification email while trying to link the My Best Buy account to your BestBuy.com account. We would need to delink the My Best Buy account from any other BestBuy.com accounts before you can link it to your BestBuy.com account. Please send me a private message with the below information, by clicking on the blue button in my signature, and I will see what I can do to help.
Name
Phone #
Mailing address
Email address
How to Link a My Best Buy™ membership to your BestBuy.com Account
I hope you have a fantastic day!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Hi, I am trying to link my Ipad to my email account, and keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on. Please help.

Hi, I am trying to link my Ipad to my email address, but I keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on to. Can someone please help me?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I had to reset my Apple password and now my iTunes and iCloud passwords no longer work. How do I get them linked again and under the same password. I've tried my new password on each login screen and it isn't accepted.

I had to reset my Apple password and now my iTunes and iCloud passwords no longer work. How do I get them linked again and under the same password. I've tried my new password on each login screen and it isn't accepted.

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

When I am trying to package my artwork in Adobe Illustrator CC, it is not capturing my images and fonts. How do I make sure my linked photos and fonts are captured?

When I am trying to package my artwork in Adobe Illustrator CC, it is not capturing my images and fonts. How do I make sure my linked photos and fonts are captured?

Not all fonts can be packaged depending on their licensing. Some fonts are set to not allow packaging. For those you would have to manually locate them on your computer and add them to the folder where the packaging occurred.
For the images have you checked the "copy links" option?

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad an

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad and not the other way around. It basically is trying to make my old village the new village, meaning I lose a lot of progress. How do make it combine the 2? If I cannot, is there a way to remove the new village off the Game Center and add the one I want to be saved? Thank you.

You'll have to contact the app developer for help with this.

CVI - linking vendor and customer to the same BP

Hi all,
I'm working in a scenario where the CVI (Customer Vendor synchronizing with Business Partners) works in the direction Vendor/Customer to BP. This means that the user creates a vendor or a customer (within the AP/AR modules) and the system creates the business partner automatically.
The problem is that the system doesn't perform any check to see if the vendor (or the customer) is linked to a customer (or a vendor) within the AP/AR master data and if yes, connects the vendor/customer to the same BP which is assigned to the customer/vendor.
Example: vendor 1000 is connected to customer 2000 within their master data in AP/AR. the system will create 2 separate business partners, one for vendor 1000 and one for customer 2000 rather then connect them to the same business partner.
The CVI_CUSTOM_MAPPER BADI kicks in too late (!!) since at that point of the process, the system has already determined the necessary entry for the link tables (CVI_CUST_LINK and CVI_VEND_LINK) and any change to the BP GUID within methods MAP_CUSTOMER_TO_BP or MAP_VENDOR_TO_BP will result in dumps at a later stage, as the link in the CVI link tables will contain a GUID which was never created...
Please help me.. I'm stuck now...
Shlomi

Hi,
Check the "Automatic creation of Business Partner in FSCM" message. You have to create BP to synchro with customer and customer to BP.
To synchro personal data, you have to run MDS_LOAD_COCKPIT program.
JPA

I need help. I am trying to link my icloud contacts and calender to Microsoft Outlook on Office 365. I keep recieving iCloud Setup for Outlook Error Report (v4.6.18.0) - Error: 0x80040102: CopyMessages failed. Help.

I need help. I am trying to link my icloud contacts and calender to Microsoft Outlook on Office 365. I keep recieving iCloud Setup for Outlook Error Report (v4.6.18.0) - Error: 0x80040102: CopyMessages failed. Help.

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

I'm trying to load up webpages and am getting the error "URL not valid" but it's on sites and URLs that i know for sure are. Like when I click a link it'll do that but I'll close the notification box and click the link again and it'll load.

I'll pretty much just get a message that says something like google.com is invalid when I know it for sure it. Even if I just click on a link on like Gizmodo or something, I'll get that message. I'll close the message and then I'll click the link again and it would actually load up now.
== This happened ==
A few times a week
== A while ago. Perhaps a couple weeks

Click here and request assistance.
(91679)

I had to install a new hard drive and Im trying to reinstall LIGHTROOM and the download link is expired. What do I do?

How can i reinstall LIGHTROOM on my macbook pro

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable

trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable" click ok to try again or enter an alternate path to a folder containing the installation package "itunes.msi'

tiburon77 wrote:
trying to remove itunes and its component get this"the feature you are trying to use is on a network resource that is unavailable" click ok to try again or enter an alternate path to a folder containing the installation package "itunes.msi'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

I am trying to uninstall itunes and keep getting a reject that reads "the feature you are trying to use is on a network resource that is unavailable." Its windows...help!

I am trying to uninstall itunes and keep getting an error that reads "the feature you are trying to use is on a network resource that is unavailable." Itunes on windows. Help!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to update iTunes and am getting an error message The feature you are trying to use is on a network resource that is unavailable

Hi, I am trying to get help with an update install of iTunes. When I opened iTunes the other day, it told me there was an update to version 10.6.1. When I tried to install this version I received the following message " The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found. I tried running Windows fixit, but this did not solve the problem. Can anyone tell me how to finish uninstalling the old iTunes file, so I can reinstall the newest version? Any help would be greatly appreciated. Thank you.
Regards, Paul

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to uninstall itunes and I received a message: The feature you are trying to use is on a network resource that is unavailable.

I am trying to uninstall itunes and I received a message: The feature you are trying to use is on a network resource that is unavailable.

Refer this link here:
https://discussions.apple.com/thread/4029492?tstart=0

Error while trying to use Ant and creating Jdbc Datasource

I was following the documentation to auto-create my datasource in my weblogic server. I get an error while it is trying to link the datasource to the server. Does anybody have any ideas,it is almost like the query to get the server isn't working.
Here is my ant task:
<target name="setupJdbcDatasource">
     <wlconfig url="t3://localhost:7001" username="weblogic" password="weblogic">
     <query domain="MyDomain" type="Server" name="AdminServer" property="adminserver"/>
     <create type="JDBCConnectionPool" name="TestDatasource" property="DatasourceTest">
          <set attribute="CapacityIncrement" value="1"/>
          <set attribute="DriverName" value="weblogic.jdbcx.oracle.OracleDataSource"/>
          <set attribute="InitialCapacity" value="1"/>
          <set attribute="MaxCapacity" value="10"/>
          <set attribute="Password" value="cmuser"/>
          <set attribute="Properties" value="user=cmuser SID=ORCH serverName=10.13.5.144 portNumber=1521"/>
          <set attribute="RefreshMinutes" value="0"/>
          <set attribute="ShrinkPeriodMinutes" value="15"/>
          <set attribute="ShrinkingEnabled" value="true"/>
          <set attribute="TestConnectionsOnRelease" value="false"/>
          <set attribute="TestConnectionsOnReserve" value="false"/>
          <set attribute="URL" value="jdbc:bea:oracle://10.13.5.144:1521"/>
          <set attribute="Targets" value="${adminserver}"/>
     </create>
     </wlconfig>
</target>
My Domain is MyDomain, and server is AdminServer. The error I get is:
[wlconfig] weblogic.management.DistributedManagementException : Distributed Management [1 exceptions]
BUILD FAILED
X:\ibutt_PCView\src\CM\build.xml:285: Error invoking MBean
command: javax.management.MBeanException
And in my server log:
jdbcDataSourceBean=[MBeanServerInvocationHandler]com.bea:Name=CP-ConfigManagemen
tTest,Type=weblogic.j2ee.descriptor.wl.JDBCDataSourceBean,Parent=[MyDomain]/JDBC
SystemResources[CP-ConfigManagementTest],Path=JDBCResource
<May 21, 2006 3:50:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "ConfigManagementTest": [BEA][Oracle JDBC Dri
ver]Missing connection information: no serverName specified.>
<May 21, 2006 3:50:58 PM EDT> <Error> <Deployer> <BEA-149265> <Failure occured i
n the execution of deployment request with ID '1148241051441' for task 'weblogic
.deploy.configChangeTask.2'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:

Hi. This seems like an XML parsing problem.
Could you please try changing the driver
properties from:
<set attribute="Properties" value="user=cmuser SID=ORCH serverName=10.13.5.144 portNumber=1521"/>
to:
<set attribute="Properties" value="user=cmuser SID=ORCH"/>
The server and port are already in the URL
thanks,
Joe

Trying to link VC++ and CVI

Similar Messages

Maybe you are looking for