Trying to map java to %ROWTYPE

Hello:
I am calling stored procedure with JDBC and the procedure has an in parameter of type %ROWTYPE. What method do I call on OracleStoredProcedure to pass a value on to the procedure (setObject, setCursor, etc.)? I haven't had luck finding answers on the web or in Oracle's documentation so I thought I'd try here.
Thanks
Eric

Hi Eric
Have a look to the following thread...
Re: Pass table rowtype between java class and PL/SQL package
HTH
Chris

Similar Messages

Exception when trying to map a java class to a Structured Type

Hi All ,
I am trying to map a structured type to a class using JDBC 2.x
DB : Oracle 9i
Driver : Oracle thin driver ( $ORA_HOME\jdbc\lib\classes12.jar )
Java class is : RRPERSON and have implemented SQLData interface
I have created a type for this class in DB . I have also mapped this type using
Map typeMap = conn.getTypeMap();
typeMap.put("SCOTT.RRPERSON", SerialDemo.RRPerson.class);
When I give
PreparedStatement pstmt = con.prepareStatement( "INSERT INTO RRTBL " +
" VALUES ( ? ) " );
RRPerson r = new RRPerson();
pstmt.setObject(1,r); // ERROR HERE
pstmt.executeUpdate();
I get at the given line
Exception in thread "main" java.sql.SQLException: Fail to construct descriptor:
Invalid arguments
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:187)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:229)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:954)
at oracle.sql.StructDescriptor.createDescriptor(StructDescriptor.java:110)
at oracle.sql.STRUCT.toSTRUCT(STRUCT.java:402)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:2770)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:2905)
at SerialDemo.SerialTest3.writeMyData(SerialTest3.java:43)
at SerialDemo.SerialTest3.main(SerialTest3.java:25)
Can anyone please tell me what is wrong ?
Thanks in Advance
Ratheesh

Hi Retheesh
Me too got the same error .." Fail to create descriptor "
If you know the cause, please reply
Thanking you
Sudha

Mapping java.util.hashtable

Hello all
I have a requirement of mapping java.util.hashtable to Oracle9i database. I read on the application developers guide that this type can not be mapped through the Workbench GUI and you need to write code for it.
I followed the example code as below
DirectMapMapping directMapMapping = new DirectMapMapping();
directMapMapping.setAttributeName("..");
directMapMapping.setReferenceTableName("..");
directMapMapping.setReferenceKeyFieldName("..");
directMapMapping.setDirectKeyFieldName("..");
directMapMapping.setDirectFieldName("..");
directMapMapping.setKeyClass(String.class);
directMapMapping.setValueClass(Integer.class);
descriptor.addMapping(directMapMapping);
The insertion to the database went very well but while retriving the data from the database i am getting the following error.
Exception Description: Trying to set value [[DatabaseRow(
     DUMMYTABLE.KEYVALUE => 100
     KEYNAME => 1), DatabaseRow(
     DUMMYTABLE.KEYVALUE => 200
     KEYNAME => 2)]] for instance variable [dummyTable] of type [java.util.Hashtable] in the object. The specified object is not an instance of the class or interface declaring the underlying field, or an unwrapping conversion has failed.
If any one has any idea, please let me know.
Thanks in Advance

Which version/patch is this running? I don't know of any specific bugs to this, but there have been a couple of minor seemingly-unrelated fixes to DirectMapMapping, but sometimes they're more related than you think.
The exception is saying the types aren't matching up. You are 100% sure the attribute you're mapping to is a java.util.Hashtable? It shouldn't be necessary, but you might want to call directMapMapping.useMapClass(java.util.Hashtable.class);
- Don

Problem trying to run java embedded in Xscale -PXA270

Hi all,
I have a Arcom Zeus (Xscale -PXA270, ARMv5, 5TE), and I'm trying to install java embedded for armv5 (headless). My system is debian/linux, gcc (), kernel 2.6.16-28 (cannot upgrade) and glibc (). My /proc/cpuinfo is:
Processor : XScale-PXA270 rev 7 (v5l)
BogoMIPS : 517.73
Features : swp half thumb fastmult edsp
CPU implementer : 0x69
CPU architecture: 5TE
CPU variant : 0x0
CPU part : 0x411
CPU revision : 7
Cache type : undefined 5
Cache clean : undefined 5
Cache lockdown : undefined 5
Cache format : Harvard
I size : 32768
I assoc : 32
I line length : 32
I sets : 32
D size : 32768
D assoc : 32
D line length : 32
D sets : 32
Hardware : Arcom ZEUS
Revision : 0000
Serial : 0000000000000000
My /proc/meminfo is:
MemTotal: 127684 kB
MemFree: 13532 kB
Buffers: 4688 kB
Cached: 70400 kB
SwapCached: 0 kB
Active: 71760 kB
Inactive: 32680 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 127684 kB
LowFree: 13532 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 39200 kB
Slab: 7036 kB
CommitLimit: 63840 kB
Committed_AS: 161180 kB
PageTables: 848 kB
VmallocTotal: 319488 kB
VmallocUsed: 66072 kB
VmallocChunk: 253116 kB
I think all system requirements are respected!
I have installed the package but when I try to execute "java", using "./java", it state that the file is not found, which typically means (when the file exists :D), that it is not compiled for the system in question. So, I have compiled a simple helloworld in C and compile it, to compare the output of the file command, between my program and the "java" executable:
* a.out: ELF 32-bit LSB executable, ARM, version 1 (ARM), for GNU/Linux 2.6.12, dynamically linked (uses shared libs), for GNU/Linux 2.6.12, not stripped
* java: ELF 32-bit LSB executable, ARM, version 1 (SYSV), for GNU/Linux 2.6.14, dynamically linked (uses shared libs), for GNU/Linux 2.6.14, not stripped
The only two differences are "version 1 (ARM)" or "version 1 (SYSV) - can it be the EABI? - and Kernel version 2.6.12 to 2.6.14.
Can someone help me understand what is the problem and if it can be solved by modifying my system (but not the kernel version)?.
Thanks in advance!

Hi,
forgot to state libc6 version = 2.7-18;
and gcc version = 4.4.3
thanks!

I am trying to use java file as Model layer and jsf as presentation layer

I am trying to use java file as Model layer and jsf as presentation layer and need some help
I successfully get the value of h:outputText from java file by doing simple binding operation but I am facing problems when I am trying to fill h:dataTable
I create java file
package oracle.model;
import java.sql.;*
import java.util.;*
*public class TableBean {*
Connection con ;
Statement ps;
ResultSet rs;
private List perInfoAll = new ArrayList();
*public List getperInfoAll() {*
perInfoAll.add(0,new perInfo("name","username","blablabla"));
return perInfoAll;
*public class perInfo {*
String uname;
String firstName;
String lastName;
*public perInfo(String firstName,String lastName,String uname) {*
this.uname = uname;
this.firstName = firstName;
this.lastName = lastName;
*public String getUname() {*
return uname;
*public String getFirstName() {*
return firstName;
*public String getLastName() {*
return lastName;
right click on the file and choose 'create data control'
then i wrote the jsf file:
*<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>*
*<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>*
*<f:view>*
*<h:dataTable id="dt1" value="#{bindings.perInfoAll}"*
var="item" bgcolor="#F1F1F1" border="10"
cellpadding="5" cellspacing="3" rows="4" width="50%"
dir="LTR" frame="hsides" rules="all"
*>*
*<f:facet name="header">*
*<h:outputText value="This is 'dataTable' demo" id="ot6"/>*
*</f:facet>*
*<h:column id="c2">*
*<f:facet name="header">*
*<h:outputText value="First Name" id="ot1"/>*
*</f:facet>*
*<h:outputText style="" value="#{item.firstName}"*
id="ot2"/>
*</h:column>*
*<h:column id="c4">*
*<f:facet name="header">*
*<h:outputText value="Last Name" id="ot9"/>*
*</f:facet>*
*<h:outputText value="#{item.lastName}" id="ot8"/>*
*</h:column>*
*<h:column id="c3">*
*<f:facet name="header">*
*<h:outputText value="Username" id="ot7"/>*
*</f:facet>*
*<h:outputText value="#{item.uname}" id="ot4"/>*
*</h:column>*
*<f:facet name="footer">*
*<h:outputText value="The End" id="ot3"/>*
*</f:facet>*
*</h:dataTable>*
*</center>*
*</af:document>*
*</f:view>*
but nothing is appear in my table
I know that there is something wrong in calling the binding object
I need help pls and where can i find some help to deal with another tag types
thanks

i dragged the "perInfoAll" from my "Data Controls" and choosed adf table (even I know that new table with adf tags well be generated and i want table with jsf tags)
and this code is generated
*<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"*
*"http://www.w3.org/TR/html4/loose.dtd">*
*<%@ page contentType="text/html;charset=UTF-8"%>*
*<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>*
*<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>*
*<%@ taglib uri="http://xmlns.oracle.com/adf/faces/rich" prefix="af"%>*
*<f:view>*
*<af:document id="d1">*
*<af:messages id="m1"/>*
*<af:form id="f1">*
*<af:table value="#{bindings.perInfoAll1.collectionModel}" var="row"*
*rows="#{bindings.perInfoAll1.rangeSize}"*
*emptyText="#{bindings.perInfoAll1.viewable ? 'No data to display.' : 'Access Denied.'}"*
*fetchSize="#{bindings.perInfoAll1.rangeSize}"*
*rowBandingInterval="0"*
*selectionListener="#{bindings.perInfoAll1.collectionModel.makeCurrent}"*
*rowSelection="multiple" id="t1">*
*<af:column sortProperty="uname" sortable="false"*
*headerText="#{bindings.perInfoAll1.hints.uname.label}"*
*id="c1">*
*<af:inputText value="#{row.bindings.uname.inputValue}"*
*label="#{bindings.perInfoAll1.hints.uname.label}"*
*required="#{bindings.perInfoAll1.hints.uname.mandatory}"*
*columns="#{bindings.perInfoAll1.hints.uname.displayWidth}"*
*maximumLength="#{bindings.perInfoAll1.hints.uname.precision}"*
*shortDesc="#{bindings.perInfoAll1.hints.uname.tooltip}"*
*id="it3">*
*<f:validator binding="#{row.bindings.uname.validator}"/>*
*</af:inputText>*
*</af:column>*
*<af:column sortProperty="firstName" sortable="false"*
*headerText="#{bindings.perInfoAll1.hints.firstName.label}"*
*id="c2">*
*<af:inputText value="#{row.bindings.firstName.inputValue}"*
*label="#{bindings.perInfoAll1.hints.firstName.label}"*
*required="#{bindings.perInfoAll1.hints.firstName.mandatory}"*
*columns="#{bindings.perInfoAll1.hints.firstName.displayWidth}"*
*maximumLength="#{bindings.perInfoAll1.hints.firstName.precision}"*
*shortDesc="#{bindings.perInfoAll1.hints.firstName.tooltip}"*
*id="it2">*
*<f:validator binding="#{row.bindings.firstName.validator}"/>*
*</af:inputText>*
*</af:column>*
*<af:column sortProperty="lastName" sortable="false"*
*headerText="#{bindings.perInfoAll1.hints.lastName.label}"*
*id="c3">*
*<af:inputText value="#{row.bindings.lastName.inputValue}"*
*label="#{bindings.perInfoAll1.hints.lastName.label}"*
*required="#{bindings.perInfoAll1.hints.lastName.mandatory}"*
*columns="#{bindings.perInfoAll1.hints.lastName.displayWidth}"*
*maximumLength="#{bindings.perInfoAll1.hints.lastName.precision}"*
*shortDesc="#{bindings.perInfoAll1.hints.lastName.tooltip}"*
*id="it1">*
*<f:validator binding="#{row.bindings.lastName.validator}"/>*
*</af:inputText>*
*</af:column>*
*</af:table>*
*</af:form>*
*</af:document>*
*</f:view>*
but when run it i see the following errors
*Class oracle.adf.model.adapter.bean.BeanDataControl can not access a member of class nl.amis.hrm.EmpManager with modifiers "private"*
*Object EmpManager of type DataControl is not found.*
*java.lang.NullPointerException*
*Class oracle.adf.model.adapter.bean.BeanDataControl can not access a member of class nl.amis.hrm.EmpManager with modifiers "private"*
*Object EmpManager of type DataControl is not found.*
*java.lang.NullPointerException*
:(

Error 0x800704b3 when trying to map a network drive

Hi there,
I have the following error when trying to map a network drive in my home network:
"\\iomegahmd can not be reached" and the error code is 0x800704b3.
I already looked into the services, and my strong assumption is that the problem is that the service "TCP/IP NetBIOS Helper" is not statrted and it is disabled. When I try to start it, there is an error message:
"The system could not find the path specified".
I've also checked the dependency components of the service "TCP/IP NetBIOS Helper":
Ancillary Function Driver for Winsock
NetBT
TCP/IP-Protocol driver
NetIO-Legacy-TDI Support driver
in the device manager if they are running, but they are all running. The start is set to "System".
Under the TCP/IP Internet version 4 properties of the wireless device, under Advanced -> WINS Ive set Enable NetBIOS over TCP/IP, but it didnt help either.
What else could I try, so that I can map network drives?
I should also mention, that the problem persist since some week ago. Before it, it was properly functioning. Also, on the other computers in my networks I do not have problem accessing the same network drive.
Thanks in advance,
Dime

> I should also mention, that the problem persist since some week ago. Before it, it was properly functioning.
Its difficult to say whats wrong in your case. My first idea is: set the system to early time point before this error appeared.
I would also recommend to disable all the security software and check if you come across the same problem.
If you still face the issue, then follow the link to fix the corrupted user profile.
http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

XSLT MAPPING/JAVA MAPPING

Hi All,
After faceing so much of problem, i found that it would be better if i can go for an XSLT/java mapping:
1. It is adding an extra <b>ns0</b> to header line & end line which i dont want to be generated in the output xml file.
2. Namespace problem that basically sticking to 60 but i want 72 characters in my target xml file.
3. No carriage return at the end of each line which is not geting generated through graphical mapping.
Now i have an XSD provided by the client. So how can i use that and which mapping should best suits to solve all these problem.
Should i go for a java mapping or an XSLT/JAVA mapping.
I dont have any idea on both of them, So can you people send me the details for it.
Many Thanks & Best Regards,
JGD.

Hi,
Based on the requirement and size we can choose the mapping.
If java is suitable to our requirement then we go for java.
If XSLT is suitable to our requirement then we go for XSLT.
Performance wise(high --> low) :
If data is less then
Graphical mapping -
> Java(sax parser)mapping -
> Java(dom parser)mapping -
> XSLT mapping -
> ABAP mapping.
If data is high then
XSLT mapping -
> Java(sax parser)mapping -
> Graphical mapping(internally it uses SAX)----> Java(dom parser)mapping -
> ABAP mapping.
If you choose XSLT then you can select Altova Map Force tool then no need to write the XSLT code here, it will automatically generates the code.
N:1 XSLT Mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ac53f2-21d7-2a10-afa2-ce1a0577ca18
XSLT mapping https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15

Why would an error pop up saying the installer is damaged. The Installer can't open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Mapping java classes to XML files

Hi Friends !!
Please I need your help.
Does somebody out there know any framework or API that helps me to map Java classes to XML files.
Something like:
public class Test {
    public int x;
    public int y;
    public int sum(){}
}to something like:
<?xml version="1.0" encoding="UTF-8"?>
<class>
<className>Test</className>
bla
bla
bla
</class>
Any tips?
Thanks in advance
Cleverson

JAXB will create classes from an XML schema, SAX is a parser library and JAXP is a library of XML a bunch of XML tools.
I don't care for JAXB too much. I would skip it and go right to the JAX-RPC spec (WebServices).

Got error when trying to generate Java proxy jar file for webservice

Hi,
I am having a warning message when trying to generate java proxy jar file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United Airlines
got an enterprise weblogic license deal with BEA, any help will be highly appreciated.
Thanks!!!
Naichen
[ModifyPNRWSContract.wsdl]

Hi Naichen,
I was able to successfully run both the autotype and clientgen Ant task, on the
WSDL you provided. The code behind those Ant tasks are pretty much what the WebLogic
Web Services test page run. Are you using WLS 8.1 SP2? If not, you might want
to try with that version.
Regards,
Mike Wooten
"Naichen Liu" <[email protected]> wrote:
>
>
>
Hi,
I am having a warning message when trying to generate java proxy jar
file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this
service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following
exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United
Airlines
got an enterprise weblogic license deal with BEA, any help will be highly
appreciated.
Thanks!!!
Naichen

Blaze DS - Mapping java object into another java application

Good afternoon,
I realized a Client-Server application. Server is Java-based. Client is Flex. Server services are accessible through Blaze DS.
Now I have some Java clients that need to access server services. Blaze DS permits to do it simply but I don't know how to map java objects as I do using [RemoteClass(alias.....)] construct at Actionscript side.
For example, server sends a MyObjectType and client receives an ASObject.
Is there a way to map java MyObjectType automatically at destination?
Thank you for help and sorry for poor english.
Regards, Francesco

xstream will convert any given java object to xml. Not sure what support it offers for schemas.
http://xstream.codehaus.org/

HT1338 I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

If you can run it under chrome, you have java installed.
There was some malware that exploited an older version of Java (not javascript) running in a Browser. Since few people use it Apple turned off Java by default in the Safari Browser.
If you need it for something, just turn it back on in Safari preferences (inside Safari). After a few months of non-use, you may find it has turned itself off again.

Suffering an complie error when trying to compile java class in EBS11i

Hi,
When I trying to compile java classes with which imported the HttpServletResponse class, will get the follow error message:
package javax.servlet does not exist
cannot resolve symbol
symbol : class HttpServletResponse
It seems the javax.servlet package is not included in the classpath. But I checked the $CLASSPATH, it seems no problem.
echo $CLASSPATH
/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/applvis/viscomn/java/appsborg2.zip:/u02/applvis/visora/8.0.6/forms60/java:/u02/applvis/viscomn/java
Does anyone know the reason?
environment: ebs 11i
Thanks&Regards,
Xiaofeng

resolved this issue.
1. Edit $APPL_TOP/admin/adovars.env file -
Add the following jar files to the AF_CLASSPATH line -
Full path of /...../iAS/Apache/Jsdk/lib/jsdk.jar
Full path of /...../iAS/Apache/Jserv/libexec/ApacheJServ.jar
2. Bounce the concurrent manager in order to have the changes take effect.

Error when trying to run Java

I am trying to get Java updated and running on my computer...I am Running Windows 98 2nd edition ( ya I know ;o) ) .
I get this error message :
The system cannot find the registry key specified.
HKEY_LOCAL_MACHINE\JavaSoft\Java Runtime Enviroment\1.5.0_03
I am new to this so please bare with with..I hope I did not post in the wrong forum...if so I am sorry...but any help would be greatly appreciated...I'm stuck :o) if anyone could even point me in the right direction I would be very greatful...Thanks in Advance
Angel80

Thank you all for your time and your help...everything is working great now :o)
Hope you all have a great day.

HT1338 I have tried to update Java to continue to play games on Pogo but it has not been successful. Suggestions, please.

I have tried to update Java to continue to play games on Pog but update is not successful. Suggestions, please.

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

Trying to map java to %ROWTYPE

Similar Messages

Maybe you are looking for