Trying to run rda.pl but getting error.
Hi,
I am Prasanta and I am facing this problem.When I was trying run rda.pl script for generating a report for the overal picture for the server and database.
Environment Details:
HP-UX(PA-RISC) B.11.11 64 bits.
Database version 10.1.0.2.0
Here is the error what I am getting:
oracle@ukw3devhp4:/tmp/prasanta/rda: ./rda.pl
Can't locate strict.pm in @INC (@INC contains: /opt/perl5/lib/5.00502/PA-RISC1.1 /opt/perl5/lib/5
.00502 /opt/perl5/lib/site_perl/5.005/PA-RISC1.1 /opt/perl5/lib/site_perl/5.005
.) at ./rda.pl line 12.
BEGIN failed--compilation aborted at ./rda.pl line 12.
Kindly advice me how can come out of this problem.
Prashanta,
You did read the error message, didn't you? It is complaining about the absence of a file called 'strict.pm'.
This means either the file is missing from your OS (which you can veriify using find) or the environment variable PERL5LIB is set incorrectly. It should refer to the perl software provided by Oracle, not to the O/S provided version of perl. IIRC, the correct value of PERL5LIB is documented, so a search on http://tahiti.oracle.com should provide results.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Trying to extend class TimecardCO but getting error the following message
I am using jdev version 9.0.3.5
I am trying to extend class TimecardCO; but an error is produced when I try to run the page in EBS.
This is the message I am getting:
Error message is java.lang.NullPointerException
at oracle.apps.hxc.selfservice.common.util.GlobalUtilities.changeDestinationURL(GlobalUtilities.java:1418)
This is my package below.
package oracle.apps.hxc.selfservice.timecard.webui;
import oracle.apps.hxc.selfservice.timecard.webui.TimecardCO;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.OAFwkConstants;
public class xtimecardcoex extends TimecardCO
public void processFormRequest(oracle.apps.fnd.framework.webui.OAPageContext param1, oracle.apps.fnd.framework.webui.beans.OAWebBean param2)
System.out.println("IN xtimecardcoex processFormRequest");
}Here is my error Page
=============
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: java.lang.NullPointerException
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:603)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2335)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1734)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.lang.NullPointerException
at oracle.apps.hxc.selfservice.common.util.GlobalUtilities.changeDestinationURL(GlobalUtilities.java:1418)
at oracle.apps.hxc.selfservice.timecard.webui.TimecardCO.processRequest(TimecardCO.java:261)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2335)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1734)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
java.lang.NullPointerException
at oracle.apps.hxc.selfservice.common.util.GlobalUtilities.changeDestinationURL(GlobalUtilities.java:1418)
at oracle.apps.hxc.selfservice.timecard.webui.TimecardCO.processRequest(TimecardCO.java:261)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2335)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1734)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534) -
Trying to download last versions but get error on my laptop
Trying to download last new version if iTunes on laptop but get error failed to download. Never had this problem before need help
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Tried to dowload add-ons but get error 203
Running xp, tried to download cool preview, but keep getting error 3o2.
See:
* http://kb.mozillazine.org/Unable_to_install_themes_or_extensions -
New to aperture, trying to import .nef files but get error
Hi, I'm new to Aperture and I have a Nikon D7100. I'm trying to import my photos which were shot in .NEF format (Nikon RAW) butI get an error message. When I insert the SD card, I see the thumbnails. I made a new project and them clicked on "import checked" but it gives me a black square with an erro that the format is not supported? Help!
When you are shooting RAW with your camera, keep in mind, that not all raw formats for your camera are supported.
The list of supported cameras (OS X Mavericks: Supported digital camera RAW formats) has a footnote for the Nikon D810†:
†Nikon RAW L format only.
So don't change the compression settings in your camera. There is not yet a corresponding list for Yosemite, so I am not sure, if the same restrictions still apply. -
Trying to delete Active Directory but getting error's
Hi There,
I am trying to delete an Active Directory that I have. I have removed all subscriptions from this Active Directory but now I get the message:
Directory contains one or more applications that were added by a user or administrator.
Under the Active Directory, I have no applications (it used to have applications and I have since removed them).
I don't have any other subscriptions tied to this Active Directory. It could have been used for an Office 365 trial quite a few years ago.
How can I remove this? Tried almost everything.
ThanksHello,
A Global Administrator can delete an Azure AD directory from the Azure Management Portal. When a directory is deleted, all resources contained in the directory are also deleted; so you should be sure you don’t need the directory before you delete it.
ERROR: Directory has one or more applications
If you get this error message you may have applications associated with the directory, in order to proceed with the deletion of the directory you must ensure these are removed.
If you select the Applications pane within Azure Active Directory check the applications, and if they are not required then proceed with deleting them. If no applications are visible then you may find that you have ‘hidden’ applications that are not yet
exposed via the UI.
In order to delete this, you will need to use Azure Active Directory PowerShell module. You can download this (Manage Azure AD using Windows PowerShell)
Once you have downloaded the required components and successfully installed them go ahead and launch a Powershell Console
Connect -MsolService
Enter your global admin credentials {example:
[email protected]}
It is important to note here that you wont be able to login using a Microsoft Account aka Live ID and so if this is the only identity you have. create a work account aka organizational account in the directory first to perform this action which you can
delete once finished.
Get -MsolServicePrincipal | Select DisplayName
This will then show you what applications you have listed, some of which are require and won’t be able to be removed. if you don’t need any of the applications listed you can go ahead and remove them
Get -MsolServicePrincipal | Remove-MsolServicePrincipal
NOTE:
You will find that some error (red text will be displayed) ignore that, those ones are service side service principals but they are white-listed and the deletion will work with them present.
If this then fails, take a look at the PowerShell MSONLINE Log Files and if you still need further guidance, ensure to attach that to the support incident as it is super helpful to the support engineering teams when investigating the problem your having.
These files can be found “C:\Users\%username%\AppData\Local\Microsoft\Office365\Powershell\”
Regards,
Neelesh. -
Trying to use system recovery but getting error f3-f100-f001
My computer currently will not start in anything but safe mode(starting normally will not load computer), so I'm trying to restore my computer to its factory defaults. However whenever I choose the Repair Your Computer option after pressing F8 at startup, I get the error f3-f100-f0010 which forces my laptop to shut down. I was getting blue screens before this happened so I believe my OS driver (Windows 7)is corrupted. How would I be able to fix this error and reinstall my OS? The Model No. of my computer is PSK2LU-001003 Toshiba Satelite, by the way.
That sounds like it's having trouble with the hard drive. Try performing a recovery by holding '0' (zero) while booting the laptop.
- Peter -
Geeting error while trying to run RDA Diagnostics tool
Hi ,
We hve installed E-Business 12.0.4 and are trying to run RDA diagnostics tool. And I am getting this error
ERROR - Environment is not set
ACTION - RDA cannot execute without a correct applications environment. Make sure a valid environment is available at the command line for RDA.
I refered to metalink note 235307.1 . There is FAQ Section . It says for R12
ACTION - RDA cannot execute without a correct applications environment.Make sure a valid environment is available at the command line for RDA.
This error can occur on a RAC or shared APPL_TOP environment, or when using virtual hostname (bug 7246721 ), when running RDA from within ODF.
The issue is that RDA may try to run APPSORA.env when running from ODF but in a shared APPL_TOP environment, running the APPSORA.env may be incorrect for the node.
For R12:
Cause:
RDA is unable to find the config.xml file under $APPL_TOP/admin ( e.g. <$TWO_TASK>_<hostname>.xml or <$TWO_TASK>.xml )
and
EBS environment file under $APPL_TOP. ( APPSORA.env or APPS<$TWO_TASK>_<hostname>.env )
Workaround:
1. Get the value for TWO_TASK from the dbc-file ( Usually under $FND_SECURE matching the value of "s_dbc_file_name" in the $CONTEXT_FILE)
2. If files $APPL_TOP/APPSORA.env and $APPL_TOP/APPS<TWO_TASK>_<hostname>.env do not exist
create a symbolic link from the existing EBS environment file (e.g. APPS_<hostname>.env) to $APPL_TOP/APPS<TWO_TASK>_<hostname>.env
My problem is that the file $APPL_TOP/APPS<TWO_TASK>_<hostname>.env exists but the APPSORA.env does not exist .
Also the note does not mention anything about resolving the config.xml . This does not exist for me too.JavaScript != javareplace or redirect ??
-
I have tried to implement jasper report but getting exceptions at run time
I have tried to implement jasper report but getting exceptions at run time and I couldn't get the reason of these exceptions. please give me idea to solve this problem.
I am using following jar files for this :
commons-beanutils-1.6.1.jar
commons-digester-1.7.jar
commons-logging.jar
jasperreports-1.2.0.jar
code is as follows:-
(1) xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE jasperReport
PUBLIC "-//JasperReports//DTD Report Design//EN"
"http://jasperreports.sourceforge.net/dtds/jasperreport.dtd">
<jasperReport name="Simple_Report">
<detail>
<band height="20">
<staticText>
<reportElement x="180" y="0" width="200" height="20"/>
<text><![CDATA[Hello World!]]></text>
</staticText>
</band>
</detail>
</jasperReport>
(2.) java file
import net.sf.jasperreports.engine.*;
import net.sf.jasperreports.engine.xml.*;
import org.xml.sax.*;
import org.apache.commons.digester.Digester;
import org.apache.commons.digester.RuleSetBase;
import java.util.*;
public class JasperReportsIntro
public static void main(String[] args)
JasperReport jasperReport;
JasperPrint jasperPrint;
try
jasperReport = JasperCompileManager.compileReport(
"jasperreports_demo.jrxml");
jasperPrint = JasperFillManager.fillReport(
jasperReport, new HashMap(), new JREmptyDataSource());
// JasperExportManager.exportReportToPdfFile(
// jasperPrint, "jasperReports/simple_report.pdf");
catch (JRException e)
e.printStackTrace();
I am getting exceptions like:
net.sf.jasperreports.engine.JRException: Errors were encountered when compiling report expressions class file:
/home/navneet/Simple_Report_1143636234024_954843.java:4: package net.sf.jasperreports.engine does not exist
import net.sf.jasperreports.engine.*;
^
/home/navneet/Simple_Report_1143636234024_954843.java:5: package net.sf.jasperreports.engine.fill does not exist
import net.sf.jasperreports.engine.fill.*;
^
/home/navneet/Simple_Report_1143636234024_954843.java:18: cannot find symbol
symbol: class JREvaluator
public class Simple_Report_1143636234024_954843 extends JREvaluator
^
/home/navneet/Simple_Report_1143636234024_954843.java:25: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_RESOURCE_BUNDLE = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:26: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_CONNECTION = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:27: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_PARAMETERS_MAP = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:28: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_IS_IGNORE_PAGINATION = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:29: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_CLASS_LOADER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:30: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_VIRTUALIZER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:31: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_LOCALE = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:32: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_DATA_SOURCE = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:33: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_SCRIPTLET = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:34: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_MAX_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:35: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_PAGE_NUMBER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:36: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_COLUMN_NUMBER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:37: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_REPORT_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:38: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_PAGE_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:39: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_COLUMN_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:62: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_RESOURCE_BUNDLE = (JRFillParameter)pm.get("REPORT_RESOURCE_BUNDLE");
^
/home/navneet/Simple_Report_1143636234024_954843.java:63: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_CONNECTION = (JRFillParameter)pm.get("REPORT_CONNECTION");
^
/home/navneet/Simple_Report_1143636234024_954843.java:64: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_PARAMETERS_MAP = (JRFillParameter)pm.get("REPORT_PARAMETERS_MAP");
^
/home/navneet/Simple_Report_1143636234024_954843.java:65: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_IS_IGNORE_PAGINATION = (JRFillParameter)pm.get("IS_IGNORE_PAGINATION");
^
/home/navneet/Simple_Report_1143636234024_954843.java:66: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_CLASS_LOADER = (JRFillParameter)pm.get("REPORT_CLASS_LOADER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:67: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_VIRTUALIZER = (JRFillParameter)pm.get("REPORT_VIRTUALIZER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:68: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_LOCALE = (JRFillParameter)pm.get("REPORT_LOCALE");
^
/home/navneet/Simple_Report_1143636234024_954843.java:69: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_DATA_SOURCE = (JRFillParameter)pm.get("REPORT_DATA_SOURCE");
^
/home/navneet/Simple_Report_1143636234024_954843.java:70: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_SCRIPTLET = (JRFillParameter)pm.get("REPORT_SCRIPTLET");
^
/home/navneet/Simple_Report_1143636234024_954843.java:71: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_MAX_COUNT = (JRFillParameter)pm.get("REPORT_MAX_COUNT");
^
/home/navneet/Simple_Report_1143636234024_954843.java:88: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_PAGE_NUMBER = (JRFillVariable)vm.get("PAGE_NUMBER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:89: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_COLUMN_NUMBER = (JRFillVariable)vm.get("COLUMN_NUMBER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:90: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_REPORT_COUNT = (JRFillVariable)vm.get("REPORT_COUNT");
^
/home/navneet/Simple_Report_1143636234024_954843.java:91: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_PAGE_COUNT = (JRFillVariable)vm.get("PAGE_COUNT");
^
/home/navneet/Simple_Report_1143636234024_954843.java:92: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_COLUMN_COUNT = (JRFillVariable)vm.get("COLUMN_COUNT");
^
33 errors
at net.sf.jasperreports.engine.design.JRAbstractCompiler.compileReport(JRAbstractCompiler.java:193)
at net.sf.jasperreports.engine.design.JRDefaultCompiler.compileReport(JRDefaultCompiler.java:131)
at net.sf.jasperreports.engine.JasperCompileManager.compileReport(JasperCompileManager.java:211)
at net.sf.jasperreports.engine.JasperCompileManager.compileReport(JasperCompileManager.java:144)
at com.appnetix.app.portal.financials.reports.RoyaltyReportAction.execute(RoyaltyReportAction.java:68)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.appnetix.app.control.web.AppnetixRequestProcessor.process(AppnetixRequestProcessor.java:149)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.appnetix.app.control.web.AppnetixControllerServlet.doPost(AppnetixControllerServlet.java:262)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:595)You have no permission to create a report. You have to create a permisson-entry into your server.policy. Then it would be work.
-
Table Maintainance Generated but getting error when running SM30
Hi Experts,
I am modifying existing ZTable with around 31 fields and Maintainance was not allowed before also no Table maintainance was there. Now i have changed the attributes to allow maintainance and tried creating Table Maintainance generator.
The TMG get created sucessfully but get error message when running SM30 for the Ztable with Run time error saying Coversion Error .
Error Analysis says :
Program SAPLZNMSLG attempted to display the fields of screen 0005 and error occured during the coversion of this data.
Can any one let me know what happened? Expecting replies at the earliest.
Thanks
SmitaHi,
In Text I/O Template Tab each field name will be there with Column- Name, Type and Text Or I/O Field
Go to Text OR I/O Field (Fields Wherever u have negative value).
Name Type Text Or I/O Field
vbak-menge I/O _.___.___.___,____V
Just add existing blank field ending with V.
Regards,
Nandha -
Trying to install Photoshop CC but get following message, download error. press retry to try again or contact customer support.(49)
disable running antivirus/firewall programs.
-
im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help
Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David -
I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?
If your intention is to use the trial again it will not reset if you reinstall. It will remain in its ran out state.
Maybe you are looking for
-
How do I change the email address on my I phone that is associated with the app store as I no longer have that email address
-
Server 2012 Direct Access Single NIC cant get it to work
Hi, I am having some real issues with setting up Direct Access with Server 2012 and a Windows 8 client, it simply won’t work at all. First of all I should describe my setup: I have an internet connection with a static IPv4 address on the external net
-
Data extraction from SD and MM modules
Hello people, I want to know what are all the ways by which we can extract data from SD and MM modules including LO LiS cockpit, like how easy or difficult it will be using LO, can we extract this data using business content, crea
-
Hello everyone, is there a way to display text into the 3d world and make it fallow a 3d model?
-
This is new for me. When loading a Captivate 7.0.1 scorm 1.2 course on our vendor LMS the client got this error going. The print below. From what I have ask, the version of Chrome used is the latest 34.0.1847.131 m.