Trying to run script
Hi All,
I am trying to run a sql script, but when I do so I get an error stating that the file cannot open.
Error: SP2-0310: Unable to open file.
What would cause this type of error to occur? Is it just that the oracle login I am using doesn't have access to the directory / file?
Thanks,
S
Hi,
Unforunately, that's a very generic error message. It could mean a permission issue, as you suggested, or it could be that the name was spelled wrong, or that your default directory isn't what you think it is.
How are you calling the script? Always post the exact code that causes the error.
Can you run the script if you call it by its full path name, like this:
@c:\oracle\foo\bar\my_script.sql?
Similar Messages
-
Error when trying to run script using SDK at plugin startup
Hi
I am trying to run a script when my InDesign plugin is loaded. I referred to the PanelTreeView sdk sample as an example and implemented a StartupShutdown Boss
In my implementation, in the startup() method I have the code to get the scriptManager and the scriptRunner for my javascript that I want to run. However, when my code hits the following line :
InterfacePtr<IScriptRunner>theRunner(Utils<IScriptUtils>()->QueryScriptRunner(scriptFile) ); //scriptfile is ID script file that I want to run
I get the error saying "Calling ScriptInfoDatabase::InitScriptInfoManager before resources have been registered".
I am wondering how I can fix this error. or if this is too early to invoke scriptrunner, then is there some other place where I can invoke the scriptrunner to run my script
this is how I have defined my StartupShutdown Boss class in the .fr file
Class
kmyStartupShutdownBoss,
kInvalidClass,
/** Implementation of IStartupShutdownService that runs a scripts on startup */
IID_IAPPSTARTUPSHUTDOWN, kmyStartupShutdownImpl,
/** identify the service type */
IID_IK2SERVICEPROVIDER, kCStartupShutdownProviderImpl,
Appreciate any help on this one .. thanks!
SameerDependent on your InDesign version, you can schedule an IdleTask and do it from there, or just use a lazy startup.
IID_IK2SERVICEPROVIDER,kLazyStartupShutdownProviderImpl,
Again dependent on your InDesign version you should first check whether a script can run at all - some nasty other plugins may prevent that with modal dialogs.
Finally there is the possibility to run startup scripts even without plugin ...
Dirk -
Error when running script from OTM
Hi team,
Customer is trying to run script from OTM but is getting a "JWG file does not exist" error. I found the following metalink note and the customer has verified that the repositories are defined with exactly the same names & paths in OTM & Openscript.
Scripts Failing To Play Back From OATS Test Manager (OTM) (Doc ID 1587941.1)
I've also checked the following post in the forums but this doesn't apply to the customer because both the OTM & agent are on Windows:
https://forums.oracle.com/message/10707963
Appreciate any pointers
Thanks,
KrishnaHi Krishna
Is the agent running as a windows service or started from an interactive batch?
What kind of script is that? Web, Forms, Siebel, other?
Are they different repositories or the same? If different, how do you copy scripts from one to the other one?
Cheers
JB -
Having problems trying to run a sql script using the command prompt.
I place my script at the root c:
open run SQL Command Line.
I connected to the database using connet userid/password
Then I tried to execute the script by doing
@test_add_comments
I am getting the error message.
SQL> @test_add_comments
SP2-0310: unable to open file "test_add_comments.sql"
Am I suppose to place this sql somewhere else?
test_add_comments.sql is
COMMENT ON COLUMN myTable.ID IS 'Primary Key' ;
COMMENT ON COLUMN myTable.REVIEWLOG_ID IS 'REFERENCE TO SAFE REVIEW LOG TABLE' ;
COMMENT ON COLUMN myTable.FAC_ID IS 'REFERENCE TO ALL FACILITIES' ;
COMMENT ON COLUMN myTable.HALLBUILD_ID IS 'REFERENCE TO HALL BUILDING' ;I figure it out.
open a sql worksheet and enter the falling commands in the run script.
@c:\your_script.sql
Execute it by clicking run script. -
"Import Failed" when trying to run a import (Integration) script from FDM
Backgroud about the Issue : My source system for data is Oracle Orion and the Destination is HFM.Trying to import data fom orion to HFM through FDM via ODBC connectivity.
Modified the "Integration Script Example" in fdm_admin guide and with this i am able to import data from the Orion to the FDM staging table "tDataSegX" however i am not abel to see any data in the FDM (Import Module) and thats when i get this error "Import Failed".
Posisble casue according to my knowledge : My Import script only includes code to 1.Connect to ODBC data source 2. copies all the values from the Source table to the staging table.
I am not sure if i am missing some attributes in the script ??!!
can some one help me in checking if my imoport scritp is correct ??!!!
Here is my script
Function Import_int(strLoc, lngCatKey, dblPerKey, strWorkTableName)
Dim objSS 'ADODB.Connection
Dim strOra 'Ora string
Dim rs ' As New ADODB.Recordset
Dim rsAppend 'tTB table append rs object
Set cnSS = CreateObject("ADODB.Connection")
Set rs = CreateObject("ADODB.Recordset")
Set rsAppend = DW.DataAccess.farsTableAppend("TDATASEG7")
Dim strconn
strconn="Provider=msdaora;Data Source=<<Data Source Name>>;User Id=<<Username>>;Password=<<Password>>;"
cnSS.open strConn
strOra = "Select * "
strOra = strOra & "FROM <<Oracle View>>"
'Get data
rs.Open strOra, cnSS
If rs.bof And rs.eof Then
RES.PlngActionType = 2
RES.PstrActionValue = "No Records to load!"
Exit Function
End If
'Loop through records and append to tTB table in location's DB
If Not rs.bof And Not rs.eof Then
Do While Not rs.eof
rsAppend.AddNew
rsAppend.Fields("PartitionKey") = RES.PlngLocKey
rsAppend.Fields("CatKey") = RES.PlngCatKey
rsAppend.Fields("PeriodKey") = RES.PdtePerKey
rsAppend.Fields("DataView") = "YTD"
rsAppend.Fields("CalcAcctType") = 9
'write conditions to eliminate null
rsAppend.Fields("Amount") = rs.fields("YTD").Value
rsAppend.Fields("Desc1") = test 'rs.fields("txtAcctDes").Value
rsAppend.Fields("Account") = rs.fields("MAIN_AC_CODE").Value
rsAppend.Fields("Entity") = rs.fields("COMPANY_CODE").Value
rs.movenext
Loop
End If
'Records loaded
RES.PlngActionType = 6
RES.PstrActionValue = "ODBC Import successful!"
'Assign Return value
SQLIntegration = True
rs.close
End FunctionHI,
I first changed the table name to "strWorkTableName" and tried executing only the script from the Workbench client and got error as bellow
Financial Data Management Workbench
-2147467259 - Data access error.
At Line: 20
OK
For some reason i am not ok with running the code in the workbench client (even for checking the syntax) because for the reason that i am not sure if all the parameter required by the funciton will be passed by donig just "Run script."So even with this error in the Work bench client i proceded to the Workflow module in the web interface and run the import and here is what i have now.
Error: An error occurred importing the file.
Detail: Invalid procedure call or argument
here is the error message from the "View Erro Log"
ERROR:
Code............................................. 5
Description...................................... Invalid procedure call or argument
Procedure........................................ clsImpProcessMgr.fExecuteImpScript
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15676
IDENTIFICATION:
User............................................. admin
Computer Name.................................... <<ComputerName>>
App Name......................................... <<ApplicationName>>
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... ORION
Location ID...................................... 750
Location Seg..................................... 4
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 14:43:42] **
ERROR:
Code............................................. 5
Description...................................... Invalid procedure call or argument
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15676
IDENTIFICATION:
User............................................. admin
Computer Name.................................... <<ComputerName>>
App Name......................................... <<ApplicationName>>
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... ORION
Location ID...................................... 750
Location Seg..................................... 4
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsArchiveMgr.fArchiveSupercededDelete
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 7180
IDENTIFICATION:
User............................................. admin
Computer Name.................................... <<ComputerName>>
App Name......................................... <<ApplicationName>>
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsArchiveMgr.fArchiveSupercededFlag
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 7180
IDENTIFICATION:
User............................................. admin
Computer Name.................................... <<ComputerName>>
App Name......................................... <<ApplicationName>>
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsImpProcessMgr.fClearData
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 7180
IDENTIFICATION:
User............................................. admin
Computer Name.................................... <<ComputerName>>
App Name......................................... <<ApplicationName>>
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 7180
IDENTIFICATION:
User............................................. admin
Computer Name.................................... <<ComputerName>>
App Name......................................... <<ApplicationName>>
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False -
Trying to run Power shell Script on task schedule
My case is i'm trying to run a power shell script through the task schedule.
Note if i run the script locally it is working fine but from the task schedule it is not working.
More information:
script function: Password Change Notification
Task name : test3
Time to do the task: 9:08 am every day
the status : running
.ps1 file location: under C\windows\system32\
some actions in the task history after the dated time to run:
1 Task Scheduler launched "{3023b1eb-9b29-47b9-ace2-e6083e2f00cc}" instance of task "\test3" due to a time trigger condition
2 Task Engine "S-1-5-21-60622444-1628707926-2526327935-500: enviroment\Admin:S4U:LUA" received a message from Task Scheduler service requesting to launch task "\test3" .
3 Task Scheduler started "{3023b1eb-9b29-47b9-ace2-e6083e2f00cc}" instance of the "\test3" task for user "enviroment\admin
4 Task Scheduler launched action ""C:\Windows\System32\Password Change Notification\Password Change Notification.ps1"" in instance "{3023b1eb-9b29-47b9-ace2-e6083e2f00cc}" of task "\test3
5 Task Scheduler launch task "\test3" , instance "C:\Windows\System32\notepad.exe" with process ID 5052Hi MeipoXu,
First of all i would like to thank you for your answer, i followed the URL that you posted already in the previous comment and unfortunately it didn't work, and please find my ps1 file
content as typed below and give me your feedback on that.
# # Version 1.1 May 2014
# Robert Pearman (WSSMB MVP) # TitleRequired.com
# Script to Automated Email Reminders when Users Passwords due to Expire.
# # Requires: Windows PowerShell Module for Active Directory
# # For assistance and ideas, visit the TechNet Gallery Q&A Page. http://gallery.technet.microsoft.com/Password-Expiry-Email-177c3e27/view/Discussions#content
# Please Configure the following variables....
$smtpServer="outlook. myDomain " $expireindays = 7
$from = "الدعم الفني
<ITHelpDesk@myDomain>"
$logging = "Enabled" # Set to Disabled to Disable Logging
$logFile = "PassExpireNotlog.csv" # ie. c:\mylog.csv
$testing = "Enabled" ## "Enabled" # Set to Disabled to Email Users
$testRecipient = "MyEmail@MyDomain"
$encoding = [System.Text.Encoding]::Unicode $date = Get-Date -format ddMMyyyy
# Check Logging Settings if (($logging) -eq "Enabled")
{ # Test Log File Path
$logfilePath = (Test-Path $logFile) if (($logFilePath) -ne "True")
{ # Create CSV File and Headers
New-Item $logfile -ItemType File
Add-Content $logfile "Date,Name,EmailAddress,DaystoExpire,ExpiresOn,MsgBody"
} } # End Logging Check
# Get Users From AD who are Enabled, Passwords Expire and are Not Currently Expired
Import-Module ActiveDirectory $users = get-aduser -filter * -SearchScope Subtree -SearchBase "OU=UsersOU,DC=MyDomain,DC=MyrootDomain,DC=MYrootNS" -properties Name, PasswordNeverExpires, PasswordExpired, PasswordLastSet,
EmailAddress |where {$_.Enabled -eq "True"} | where { $_.PasswordNeverExpires -eq $false } | where { $_.passwordexpired -eq $false }
$maxPasswordAge = (Get-ADDefaultDomainPasswordPolicy).MaxPasswordAge
# Process Each User for Password Expiry foreach ($user in $users)
{ $Name = (Get-ADUser $user | foreach { $_.Name})
$emailaddress = $user.emailaddress
$passwordSetDate = (get-aduser $user -properties * | foreach { $_.PasswordLastSet })
$PasswordPol = (Get-AduserResultantPasswordPolicy $user)
# Check for Fine Grained Password
if (($PasswordPol) -ne $null) {
$maxPasswordAge = ($PasswordPol).MaxPasswordAge
$expireson = $passwordsetdate + $maxPasswordAge
$today = (get-date) $daystoexpire = (New-TimeSpan -Start $today -End $Expireson).Days
# Set Greeting based on Number of Days to Expiry.
# Check Number of Days to Expiry
$messageDays = $daystoexpire if (($messageDays) -ge "2")
{ $messageDays = "خلال
" + "$daystoexpire" + " ايام"
} elseif (($messageDays) -eq "2")
{ $messageDays = "خلال يومين
} else
{ $messageDays = "اليوم."
} # Email Subject Set Here
$subject="كلمة المرور الخاصة بك ستنتهي
$messageDays"
# Email Body Set Here, Note You can use HTML, including Images.
$body = "<P style='font-family: Arial; font-size: 16pt' />
<center> الاستاذ/ $name
</center>
<br> <center>
كلمة المرور الخاصة بك ستنتهي $messageDays </center>
<br> <center>
نأمل تغييرها في أقرب فرصة حتي تتمكن من الدخول على النظام
</center>
<br> <center>
مع تحيات الادارة العامة لتقنية المعلومات
</center>
<br> </P>"
# If Testing Is Enabled - Email Administrator
if (($testing) -eq "Enabled")
{ $emailaddress = $testRecipient
} # End Testing # If a user has no email address listed
if (($emailaddress) -eq $null)
{ $emailaddress = $testRecipient
}# End No Valid Email # Send Email Message
if (($daystoexpire -ge "0") -and ($daystoexpire -lt $expireindays))
{ # If Logging is Enabled Log Details
if (($logging) -eq "Enabled")
{ Add-Content $logfile "$date,$Name,$emailaddress,$daystoExpire,$expireson,$body"
} # Send Email Message
Send-Mailmessage -smtpServer $smtpServer -from $from -to $emailaddress -subject $subject -body $body -bodyasHTML -priority High -Encoding $encoding
} # End Send Message
} # End User Processing
# End -
Hello,
I'm trying to run a simple OpenScript script in Eclipse that creates a record (a Supplier in this case) in Oracle E-Business Suite. So I copied the the script file from OpenScript and created it as a Class in Eclipse. Then I created a main class to call the methods within the script class but no matter what method I call (initialize, run or finalize) I'm getting the java.lang.NullPointerException message. The error doesn't seem to be related with any specific line in the script but with the way that I'm calling it.
Should I call the OpenScript class from my main class in a different way? (see my examples below)
BTW, all external .jar files coming with OATS have been added to my project in Eclipse.
1) Here's the main class I created to call the OpenScript method (Eclipse auto-corrected my main class adding a Try and Catch around the method call):
public class Test {
public static void main(String[] args) {
nvscript nvs = new nvscript();
try {
nvs.initialize();
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
2) Here's the script from OpenScript (the actual script has more steps but I'm just using the first one for a proof of concept):
import oracle.oats.scripting.modules.basic.api.*;
import oracle.oats.scripting.modules.browser.api.*;
import oracle.oats.scripting.modules.functionalTest.api.*;
import oracle.oats.scripting.modules.utilities.api.*;
import oracle.oats.scripting.modules.utilities.api.sql.*;
import oracle.oats.scripting.modules.utilities.api.xml.*;
import oracle.oats.scripting.modules.utilities.api.file.*;
import oracle.oats.scripting.modules.webdom.api.*;
import oracle.oats.scripting.modules.formsFT.api.*;
import oracle.oats.scripting.modules.applet.api.*;
public class nvscript extends IteratingVUserScript {
@ScriptService oracle.oats.scripting.modules.utilities.api.UtilitiesService utilities;
@ScriptService oracle.oats.scripting.modules.browser.api.BrowserService browser;
@ScriptService oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService ft;
@ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
@ScriptService oracle.oats.scripting.modules.applet.api.AppletService applet;
@ScriptService oracle.oats.scripting.modules.formsFT.api.FormsService forms;
public void initialize() throws Exception {
this.getSettings().set("formsft.useformsonly",true);
browser.launch();
public void run() throws Exception {
beginStep(
"[1] E-Business Suite Home Page Redirect (/ebs12cloud.winshuttle.com:8000/)",
0);
web.window(2, "/web:window[@index='0' or @title='about:blank']")
.navigate("http://ebs12.xxxxxxx.com:8000/");
web.window(4, "/web:window[@index='0' or @title='Login']")
.waitForPage(null);
think(4.969);
web.textBox(
7,
"/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_text[@id='usernameField' or @name='usernameField' or @index='0']")
.setText("winshuttle_user");
think(2.0);
web.textBox(
8,
"/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
.click();
think(1.109);
web.textBox(
9,
"/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
.setPassword(deobfuscate("kjhkjhkj=="));
think(1.516);
web.button(
10,
"/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:button[@id='SubmitButton' or @value='Login' or @index='0']")
.click();
endStep();
public void finish() throws Exception {
3) Here's the error messages I'm getting based on the method I call from my main class:
3.a) when calling Initialize():
java.lang.NullPointerException
at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getSettings(IteratingVUserScript.java:723)
at nvscript.initialize(nvscript.java:22)
at Test.main(Test.java:9)
3 b) when calling Run():
java.lang.NullPointerException
at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.beginStep(IteratingVUserScript.java:260)
at nvscript.run(nvscript.java:30)
at Test.main(Test.java:9)
Any help and/or constructive comment will be appreciated it.
Thanks.
Federico.UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede. -
Error when trying to run an application containing an intercative form
<b>Hello,
I have installed WebAS 6.40 with ADS and ACF and there were no errors during the installation.
Now I'm trying to build a view with an Interactive Form UIElement. I designed the form and now I'm trying to run the Web Dynpro Application. There are no Errors during the Deployments but when IE opens it shows following error message.
seems to be something wrong with the binding of the form to the context? but I dont know how to fix this problem...
any ideas?</b>
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC local/larsPDF:
SapDictionaryGenerationCore: 6.4009.00.0000.20041026131628.0000 (release=630_REL, buildtime=2004-11-02:22:13:11[UTC], changelist=295793, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20041026132448.0000 (release=630_REL, buildtime=2004-11-02:22:17:25[UTC], changelist=295810, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:29[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:28[UTC], changelist=297524, host=PWDFM027)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:28[UTC], changelist=297524, host=PWDFM027)
SapGenerationFrameworkCore: 6.4009.00.0000.20041026132141.0000 (release=630_REL, buildtime=2004-11-02:22:05:28[UTC], changelist=295805, host=PWDFM027.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:21:59[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040805191532.0000 (release=630_REL, buildtime=2004-11-02:22:10:20[UTC], changelist=270520, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:42[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:22:31[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_07-b05, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Bound data node Node(TestPDFView.testNode) of InteractiveForm must not be empty!
at com.sap.tc.webdynpro.clientimpl.xdp.renderer.data.XfdRenderer.renderLeadSelectedElement(XfdRenderer.java:175)
at com.sap.tc.webdynpro.clientimpl.xdp.renderer.data.XfdRenderer.render(XfdRenderer.java:75)
at com.sap.tc.webdynpro.clientserver.renderer.AbstractRenderManager.render(AbstractRenderManager.java:62)
at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:343)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:104)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1085)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:393)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:635)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
<b>Message was edited by: Lars Roettgers
I started from scratch, following the Tutorial from NDS's Help.
Now there is another error message:</b>An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC local/codeExample:
SapDictionaryGenerationCore: 6.4009.00.0000.20041026131628.0000 (release=630_REL, buildtime=2004-11-02:22:13:11[UTC], changelist=295793, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20041026132448.0000 (release=630_REL, buildtime=2004-11-02:22:17:25[UTC], changelist=295810, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:29[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:28[UTC], changelist=297524, host=PWDFM027)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:28[UTC], changelist=297524, host=PWDFM027)
SapGenerationFrameworkCore: 6.4009.00.0000.20041026132141.0000 (release=630_REL, buildtime=2004-11-02:22:05:28[UTC], changelist=295805, host=PWDFM027.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:21:59[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040805191532.0000 (release=630_REL, buildtime=2004-11-02:22:10:20[UTC], changelist=270520, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:42[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:22:31[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_07-b05, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable.
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:201)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:142)
at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:398)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:104)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1085)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:393)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:635)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable.
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:77)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:87)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:198)
... 27 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:734)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1118)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:71)
... 29 more
<b>Message was edited by: Lars Roettgers
By the way, my sapmmc shows everything green but i took a look at the std_server0.out file and there seems to be a problem with the iiop service (whatever it is?).
the file says:</b>----
stdout/stderr redirect
node name : server0
pid : 1468
system name : J2E
system nr. : 00
started at : Fri Apr 15 08:21:43 2005
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40 PatchLevel 87289.311 is starting...
Loading: LogManager ... 8110 ms.
Loading: PoolManager ... 15 ms.
Loading: ApplicationThreadManager ... 1110 ms.
Loading: ThreadManager ... 234 ms.
Loading: IpVerificationManager ... 31 ms.
Loading: ClassLoaderManager ... 141 ms.
Loading: ClusterManager ... 2062 ms.
Loading: LockingManager ... 188 ms.
Loading: ConfigurationManager ... 0.000: [GC 0.000: [DefNew: 21503K->2090K(32256K), 0.1650020 secs] 21503K->2090K(251392K), 0.1651126 secs]
11172 ms.
Loading: LicensingManager ... 765 ms.
Loading: ServiceManager ...
14.543: [GC 14.543: [DefNew: 23594K->3006K(32256K), 0.0826214 secs] 23594K->3006K(251392K), 0.0827337 secs]
Loading services.:
Cannot start service com.adobe~FontManagerService; it has hard reference to service iiop with manual startup mode.
Cannot start service com.adobe~DataManagerService; it has hard reference to service iiop with manual startup mode.
Cannot start service com.adobe~TrustManagerService; it has hard reference to service iiop with manual startup mode.
Cannot start service com.adobe~PDFManipulation; it has hard reference to service iiop with manual startup mode.
Service runtimeinfo started. (47 ms).
Service timeout started. (531 ms).
Service cross started. (703 ms).
Service memory started. (297 ms).
Service file started. (1516 ms).
Service jmx_notification started. (47 ms).
Service trex.service started. (62 ms).
46.686: [GC 46.686: [DefNew: 24510K->5134K(32256K), 0.1012833 secs] 24510K->5134K(251392K), 0.1013956 secs]
Service p4 started. (546 ms).
Service classpath_resolver started. (343 ms).
51.751: [GC 51.752: [DefNew: 26638K->5639K(32256K), 0.0854840 secs] 26638K->5639K(251392K), 0.0855994 secs]
Service userstore started. (78 ms).
Service tcsecvsi~service started. (9313 ms).
Service tcsecwssec~service started. (2812 ms).
59.545: [GC 59.546: [DefNew: 27143K->6876K(32256K), 0.1044711 secs] 27143K->6876K(251392K), 0.1045851 secs]
Service log_configurator started. (23437 ms).
Service locking started. (0 ms).
Service naming started. (1797 ms).
Cannot start service com.adobe~XMLFormService; it has hard reference to service iiop with manual startup mode.
Service ts started. (93 ms).
Service licensing started. (16 ms).
Service javamail started. (1360 ms).
Service failover started. (31 ms).
Service appclient started. (375 ms).
Service http started. (719 ms).
66.579: [GC 66.579: [DefNew: 28380K->7779K(32256K), 0.1106680 secs] 28380K->7779K(251392K), 0.1107750 secs]
Service jmsconnector started. (406 ms).
Service connector started. (375 ms).
Service deploy started. (21032 ms).
Service configuration started. (15 ms).
76.080: [GC 76.081: [DefNew: 29283K->9456K(32256K), 0.1304738 secs] 29283K->9456K(251392K), 0.1305845 secs]
Service apptracing started. (250 ms).
Service webservices started. (16578 ms).
79.963: [GC 79.963: [DefNew: 30960K->9724K(32256K), 0.1223088 secs] 30960K->9724K(251392K), 0.1224566 secs]
Service dbpool started. (9125 ms).
82.983: [GC 82.983: [DefNew: 31217K->8192K(32256K), 0.1201762 secs] 31217K->9996K(251392K), 0.1202888 secs]
Service com.sap.security.core.ume.service started. (4312 ms).
89.472: [GC 89.472: [DefNew: 29696K->9325K(32256K), 0.1195945 secs] 31500K->11129K(251392K), 0.1197080 secs]
Service security started. (4219 ms).
Service classload started. (187 ms).
Service applocking started. (454 ms).
Service jmx started. (1157 ms).
Cannot start service com.adobe~DocumentServicesLicenseSupportService; it has hard reference to service iiop with manual startup mode.
Service shell started. (985 ms).
Service tceCATTPingservice started. (0 ms).
Service keystore started. (2187 ms).
Service servlet_jsp started. (2937 ms).
95.293: [GC 95.293: [DefNew: 30829K->10448K(32256K), 0.1444024 secs] 32633K->12252K(251392K), 0.1445147 secs]
Service basicadmin started. (1547 ms).
Service ssl started. (31 ms).
Service adminadapter started. (297 ms).
Service telnet started. (2469 ms).
Service prtbridge started. (2406 ms).
Service tcsecsecurestorage~service started. (1734 ms).
Service com.sap.portal.prt.sapj2ee started. (94 ms).
Service com.adobe~LicenseService started. (1063 ms).
Service com.adobe~DocumentServicesConfiguration started. (282 ms).
Service tcsecdestinations~service started. (2938 ms).
Service pmi started. (563 ms).
Service dsr started. (1000 ms).
Service sld started. (4516 ms).
103.012: [GC 103.012: [DefNew: 31952K->10752K(32256K), 0.1941724 secs] 33756K->17350K(251392K), 0.1942984 secs]
Service ejb started. (3047 ms).
Service rfcengine started. (78 ms).
Service monitor started. (1157 ms).
107.599: [GC 107.609: [DefNew: 32256K->10397K(32256K), 0.1364344 secs] 38854K->18333K(251392K), 0.1365486 secs]
Service tc.monitoring.logviewer started. (3766 ms).
Service webdynpro started. (2219 ms).
Excluding compile: iaik.security.md.SHA::a
Service jms_provider started. (9235 ms).
113.684: [GC 113.686: [DefNew: 31901K->10609K(32256K), 0.1271424 secs] 39837K->19336K(251392K), 0.1272589 secs]
119.897: [GC 119.897: [DefNew: 32113K->10752K(32256K), 0.1956659 secs] 40840K->21102K(251392K), 0.1957743 secs]
Service DQE started. (7968 ms).
ServiceManager started for 115594 ms.
Framework started for 141219 ms.
SAP J2EE Engine Version 6.40 PatchLevel 87289.311 is running!
PatchLevel 87289.311 November 18, 2004 20:31 GMT
125.381: [GC 125.382: [DefNew: 32255K->10752K(32256K), 0.3708564 secs] 42606K->23021K(251392K), 0.3709661 secs]
>132.046: [GC 132.046: [DefNew: 32255K->10752K(32256K), 0.1432425 secs] 44525K->24642K(251392K), 0.1433554 secs]
139.508: [GC 139.508: [DefNew: 32255K->7786K(32256K), 0.1626534 secs] 46146K->26233K(251392K), 0.1627654 secs]
156.330: [GC 156.330: [DefNew: 29290K->9160K(32256K), 0.1461119 secs] 47737K->27606K(251392K), 0.1462281 secs]
164.351: [GC 164.351: [DefNew: 30664K->9870K(32256K), 0.1396180 secs] 49110K->28317K(251392K), 0.1397300 secs]
172.818: [GC 172.818: [DefNew: 31374K->9698K(32256K), 0.1318665 secs] 49820K->28830K(251392K), 0.1319796 secs]
179.883: [GC 179.884: [DefNew: 31186K->9628K(32256K), 0.1428335 secs] 50319K->29330K(251392K), 0.1429453 secs]
209.777: [GC 209.780: [DefNew: 31110K->10748K(32256K), 0.1325099 secs] 50812K->30450K(251392K), 0.1326219 secs]
219.394: [GC 219.394: [DefNew: 32223K->8916K(32256K), 0.1486949 secs] 51925K->30452K(251392K), 0.1488072 secs]
225.685: [GC 225.692: [DefNew: 30420K->9057K(32256K), 0.1170096 secs] 51956K->30593K(251392K), 0.1171238 secs]
228.990: [GC 228.990: [DefNew: 30561K->9104K(32256K), 0.1223692 secs] 52097K->30641K(251392K), 0.1224795 secs]
233.533: [GC 233.533: [DefNew: 30608K->9682K(32256K), 0.1108426 secs] 52144K->31219K(251392K), 0.1109560 secs]
235.970: [GC 235.970: [DefNew: 31184K->9409K(32256K), 0.1336639 secs] 52720K->32242K(251392K), 0.1337776 secs]
239.775: [GC 239.775: [DefNew: 30913K->9958K(32256K), 0.1236763 secs] 53746K->32791K(251392K), 0.1237906 secs]
241.988: [GC 241.988: [DefNew: 31376K->8791K(32256K), 0.1234408 secs] 54209K->32798K(251392K), 0.1235509 secs]
244.184: [GC 244.185: [DefNew: 30295K->9639K(32256K), 0.1199792 secs] 54302K->33646K(251392K), 0.1200954 secs]
248.790: [GC 248.790: [DefNew: 31134K->10412K(32256K), 0.1054732 secs] 55141K->34420K(251392K), 0.1055855 secs]
263.487: [GC 263.489: [DefNew: 31916K->10184K(32256K), 0.1706016 secs] 55924K->35639K(251392K), 0.1707142 secs]
283.398: [GC 283.398: [DefNew: 31688K->10299K(32256K), 0.1792124 secs] 57143K->37262K(251392K), 0.1793183 secs]
308.239: [GC 308.239: [DefNew: 31798K->9970K(32256K), 0.1506786 secs] 58761K->37567K(251392K), 0.1507848 secs]
311.778: [GC 311.778: [DefNew: 31474K->10505K(32256K), 0.1407187 secs] 59071K->38407K(251392K), 0.1408249 secs]
Cannot start service com.adobe~DataManagerService; it has hard reference to service iiop with manual startup mode.
440.739: [GC 440.739: [DefNew: 32009K->10752K(32256K), 0.4447895 secs] 59911K->41251K(251392K), 0.4449015 secs]
1634.305: [GC 1634.305: [DefNew: 32256K->10751K(32256K), 0.2101323 secs] 62755K->42653K(251392K), 0.2102859 secs]
Apr 15, 2005 8:50:30 AM ...services.webdynpro.WebDynproContainer [SAPEngine_Application_Thread[impl:3]_25] Fatal: Failed to remove application 'local/larsPDF' for deployment state listener 'com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory'.
1694.819: [GC 1694.820: [DefNew: 32255K->10523K(32256K), 0.2601481 secs] 64157K->43727K(251392K), 0.2602722 secs]
1700.762: [GC 1700.764: [DefNew: 32027K->9149K(32256K), 0.1815572 secs] 65231K->44323K(251392K), 0.1819823 secs]
1912.846: [GC 1912.846: [DefNew: 30653K->9683K(32256K), 0.1448815 secs] 65827K->44857K(251392K), 0.1450101 secs]
2535.775: [GC 2535.775: [DefNew: 31187K->8609K(32256K), 0.1890684 secs] 66361K->45084K(251392K), 0.1891810 secs]
3631.662: [GC 3631.663: [DefNew: 30113K->8764K(32256K), 0.1315528 secs] 66588K->45239K(251392K), 0.1317497 secs]
4648.617: [GC 4648.617: [DefNew: 30268K->9041K(32256K), 0.2148379 secs] 66743K->45516K(251392K), 0.2150933 secs]
5735.738: [GC 5735.753: [DefNew: 30545K->9395K(32256K), 0.2350659 secs] 67020K->45870K(251392K), 0.2352087 secs]
Apr 15, 2005 10:02:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key0_1113552125328
Apr 15, 2005 10:02:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: wd_keyE50T+2c5GXrp3jzmjG1ZGw==
6138.115: [GC 6138.116: [DefNew: 30899K->10752K(32256K), 0.2809365 secs] 67374K->47317K(251392K), 0.2810589 secs]
6731.591: [GC 6731.591: [DefNew: 32250K->9772K(32256K), 0.5666726 secs] 68815K->47794K(251392K), 0.5864248 secs]
Apr 15, 2005 10:15:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key1_1113552880171
Apr 15, 2005 10:15:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: wd_keyoLRolFo9CjJdX98dnh0o1w==
Apr 15, 2005 10:16:39... ...services.webdynpro.WebDynproContainer [SAPEngine_Application_Thread[impl:3]_26] Fatal: Failed to remove application 'local/Welcome' for deployment state listener 'com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory'.
6934.529: [GC 6934.529: [DefNew: 31276K->7238K(32256K), 0.2245945 secs] 69298K->48224K(251392K), 0.2247325 secs]
Apr 15, 2005 10:19:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key2_1113553124437
Apr 15, 2005 10:19:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: wd_keyoLRolFo9CjJdX98dnh0o1w==
7062.447: [GC 7062.448: [DefNew: 28742K->7323K(32256K), 0.1595831 secs] 69728K->48309K(251392K), 0.1597094 secs]
Apr 15, 2005 10:31:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: wd_keyoLRolFo9CjJdX98dnh0o1w==
Apr 15, 2005 10:31:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key3_1113553881156
7754.384: [GC 7754.384: [DefNew: 28827K->6966K(32256K), 0.1205944 secs] 69813K->47952K(251392K), 0.1207089 secs]
Apr 15, 2005 10:32:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: wd_keyoLRolFo9CjJdX98dnh0o1w==
Apr 15, 2005 10:32:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key4_1113553905718
8078.801: [GC 8078.801: [DefNew: 28469K->7645K(32256K), 0.1392264 secs] 69455K->48632K(251392K), 0.1393417 secs]
Apr 15, 2005 10:37:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: ~wd_key5_1113554225437
Apr 15, 2005 10:37:31... ...l.cache.WebResourceCache.startService [Thread[Thread-68,5,SAPEngine_Application_Thread[impl:3]_Group]] Fatal: Tried to save: wd_keyoLRolFo9CjJdX98dnh0o1w==Hi Ole,
thanks for your answer.
there is one property calles cardinality (value is 0..n) and another one called selection (value is 0..1) but I cannot edit these values
In the meantime I found out that I forgot to do some of the post-installation-configuring. I fixed it and I hoped this would have solved my problem...but it didn't.
This is the latest error message:
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC local/codeExample:
SapDictionaryGenerationCore: 6.4009.00.0000.20041026131628.0000 (release=630_REL, buildtime=2004-11-02:22:13:11[UTC], changelist=295793, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20041026132448.0000 (release=630_REL, buildtime=2004-11-02:22:17:25[UTC], changelist=295810, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:29[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:28[UTC], changelist=297524, host=PWDFM027)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041102105304.0000 (release=630_REL, buildtime=2004-11-02:22:38:28[UTC], changelist=297524, host=PWDFM027)
SapGenerationFrameworkCore: 6.4009.00.0000.20041026132141.0000 (release=630_REL, buildtime=2004-11-02:22:05:28[UTC], changelist=295805, host=PWDFM027.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:21:59[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040805191532.0000 (release=630_REL, buildtime=2004-11-02:22:10:20[UTC], changelist=270520, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040909194107.0000 (release=630_REL, buildtime=2004-11-02:22:06:42[UTC], changelist=280398, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20041026133106.0000 (release=630_REL, buildtime=2004-11-02:22:22:31[UTC], changelist=295820, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_07-b05, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
java.net.SocketException: Software caused connection abort: recv failed
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:201)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:142)
at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:398)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:104)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1085)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:393)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:635)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
java.net.SocketException: Software caused connection abort: recv failed
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:77)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:87)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:198)
... 27 more
Caused by: java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:628)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:317)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:219)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:344)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:710)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1118)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:71)
... 29 more -
"Run Scripts" giving a problem to create portal domain
Hello All.
I am new to weblogic portal development. Was trying to create my basic sample portal in weblogic_portal_10.3.4 with the help of documentation. I am getting in running scripts when I was creating the domain. I have followed the below steps, please help me if you find any issue with my steps.
1. downloaded Weblogic_Portal_10.3.4 and installed in my windows 7 environment.
2. launched eclipse for weblogic portal.
3. opened portal prospective in eclipse.
4. right click on server tab and selected "Oracle WebLogic Server 11gR1 (10.3.4)"
5. opened "Domain Configuration Wizard"
6. Selected "Create a new Weblogic domain" radio button.
7. in the next screen for "Generate a domain configured automatically to support the following products"
selected "Weblogic Portal 10.3.4" radio button
8. in the next screen given the domain_name
9. in the next screen provided the password/confirm-password for administrator user
10. in the next screen selected JRocket SDK and development_mode for my domain.
11. in the next screen just left all the default configuration for the datasources. ( non of the datasource is selected in their check boxes)
12. in the next screen just clicked on "Next" button and "OK" on my popup
13. in this screen "p13nDataSource" is selected on my left top window area, All 3 SQL Files are selected for loading database.
Clicked on *"Run Scripts"*
At this point i am getting an error saying : "CFGFWK-60839: Database Load Failed!"
java.lang.Exception: SQLException when executing file file:/C:/Oracle/Middleware/wlportal_10.3/p13n/db/derby/seq_drop_tables.sql
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:183)
at com.oracle.cie.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1673)
Caused by: java.sql.SQLNonTransientConnectionException: java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
at org.apache.derby.client.am.SQLExceptionFactory40.getSQLException(Unknown Source)
at org.apache.derby.client.am.SqlException.getSQLException(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at com.oracle.cie.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:272)
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:154)
... 1 more
Caused by: org.apache.derby.client.am.DisconnectException: java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
at org.apache.derby.client.net.NetAgent.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.newAgent_(Unknown Source)
at org.apache.derby.client.am.Connection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection40.<init>(Unknown Source)
at org.apache.derby.client.net.ClientJDBCObjectFactoryImpl40.newNetConnection(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at com.oracle.cie.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:273)
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:154)
at com.oracle.cie.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1674)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:206)
at org.apache.derby.client.net.OpenSocketAction.run(Unknown Source)
at org.apache.derby.client.net.NetAgent.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.newAgent_(Unknown Source)
at org.apache.derby.client.am.Connection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection40.<init>(Unknown Source)
at org.apache.derby.client.net.ClientJDBCObjectFactoryImpl40.newNetConnection(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at com.oracle.cie.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:272)
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:154)
at com.oracle.cie.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1673)
CFGFWK-60839: Database Load Failed!
Please help me if you find any problem with the steps that I am following to create my weblogic_portal_domain.
I was following the steps mentioned at : http://docs.oracle.com/cd/E15919_01/wlp.1032/e14252.pdf to create my domain to start portal development.Those are the WLP 10.3.2 instructions. But, the 10.3.4 instructions in the tutorial (http://docs.oracle.com/cd/E26806_01/wlp.1034/e14252/setup_dev_env.htm#i1014619) are wrong, too.
In 10.3.4, with derby, Run Scripts doesn't work any longer; it should still work the other database (Oracle, SQL Server, etc.). Instead, for derby, just create the domain, accepting any warning dialogs about databases that come up. After that finishes, in the domain directory, run create_db.cmd (on windows) or create_db.sh (on *nix and Mac). It should create the derby database files in the domain, and include everything needed.
I'll send a note to get the docs updated.
Greg -
Error While trying to run a servlet
I am getting the below error while trying to run a servlet using tomcat.In this admin is a directory where I have a html file called admin.html which calls the servlet AdminServlet & replaces the url by /servlet/AdminServlet.
HTTP Status 404 - /SPOT/admin/servlet/AdminServlet
type Status report
message /SPOT/admin/servlet/AdminServlet
description The requested resource (/SPOT/admin/servlet/AdminServlet) is not available.
For more details I am also copying the code from the admin.html file below.
<script language=JavaScript>
document.location.replace('../servlet/AdminServlet');
</script>JavaScript != javareplace or redirect ??
-
Trying to run the SOA/BPM managed server withOUT running the Admin server
(This is for demo/development purposes... Using 11.1.1.4 in Windows 7 with 4gb)
Because of memory constrains I am trying to run the BPM/workspaces application without needing the Admin to be running.
When they both run, I can use the credentials I create with the Admin server but the response time is prohibitive and all my memory is used...
It seems to run much faster when only the bpm managed server is running but then I cannot login ...
So my question is simply: Whats the easiest way to set it up so I can use credentials elsewhere without requiring the admin server to be running?
( I could connect to an OID instance I have outside this server or the seeded demo they refer to in other posts ... but do these also require the admin server to be running???)
aTdHvAaNnKcSe ! (thanks IN advance)
Claudio
Edited by: clichten on Aug 20, 2011 9:35 AMI don't know if what you want is possible. Only did a suggestion that works fine for me. I'm running SOA Suite and BPM Suite 11.1.1.5 on WLS 10.3.5
Configure a new WLS domain and see if the BPM Dev template is available in your version.
I've tuned my startup script (setSOADomainEnv.cmd) as follows:
set JAVA_OPTIONS=%JAVA_OPTIONS%
set DEFAULT_MEM_ARGS=-Xms512m -Xmx1024m
set PORT_MEM_ARGS=-Xms1536m -Xmx1536m
if "%JAVA_VENDOR%" == "Oracle" goto OracleJVM
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m -XX:MaxPermSize=512m
set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=256m -XX:MaxPermSize=512m
Use visualvm that's available from your jdk/bin directory to monitor your jvm and optimize it accordingly
Regards,
Melvin -
Firefox hangs (becomes unresponsive) when accessing many sites including Gmail. Eventually, when hung, Firefox will throw up a window saying "WARNING: A script has become unresponsive" or, in the case of Gmail, the page itself will say "Some Gmail features have failed to load due to an internet connectivity problem."
IE8 and Google Chrome are working normally. I've tried Firefox in safe mode, re-installing and even running Firefox portable from a USB thumb drive. Each time with the same result—Firefox hangs or becomes unresponsive while it waits for most pages to load or run scripts.
#### PC Workstation Environment ####
Firefox 13.0.1
Windows 7
Symantec Endpoint Protection 11.0.6200.754
--Your problem sounds like the one that a co-worker and I started to have about the same time. Check your Symantec client management control log. You might see a line like the following.
Date and Time Severity Level Action Test / Production Description API Class Rule Caller Process ID Caller Process Parameter User
2012-07-30 10:48:09 AM 15 Block Production Unauthorized NT call rejected by protection driver. System Built-in rule 1608 FlashplayerPlu FuncID-B6H, R... None
At first we thought that it was a Javascript problem until we noticed this log. The key words are 'Block' and 'FlashPlayerPlu'. This problem recently started for us, perhaps with a software push 1-2 weeks ago. Internet Explorer does not hang when accessing pages with Flash.
The Flash page does eventually load after a long time. However, since the whole browser hangs for a while, for the most part having the Flash plugin enabled makes Firefox unusable if accessing pages with Flash.
Disabling the Flash plugin solves the hanging problem, but I do not know what is causing the problem, nor do I know when a combination of Windows 7, Flash, and Symantec will work. Your later version of Symantec shows that we might have the problem for a while, but I do not know what customization CSC did with Symantec. My coworker did run a complete virus scan, uncovering nothing. Another co-worker is running Windows XP. She does not have the problem, but I do not know what other versions of software she is running.
Symantec Endpoint Protection version 11.0.6100.645
Flash version 11.3.300.268
Firefox version 14.0.1
Windows 7 32-bit service pack 1 -
Has any one seen smtg simillar to this? I am trying to run wls 6.1 as a
plugin to eclipse. I suspect there can be a problem with the plugin
classloader? Funny thing is that the class not found below really does not
exist in weblogic.jar...
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised: weblogic.management.configuration.ConfigurationError -
with nested exception:
[java.lang.ClassNotFoundException:
weblogic.management.descriptors.ejb11.AdminServerMBean]
java.lang.ClassNotFoundException:
weblogic.management.descriptors.ejb11.AdminServerMBean
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:195)
at weblogic.management.internal.Helper.findClass(Helper.java:729)
at
weblogic.management.internal.Helper.getAdminOrConfigMBeanInfo(Helper.java:10
2)
at
weblogic.management.internal.ConfigurationMBeanImpl.<init>(ConfigurationMBea
nImpl.java:103)
at weblogic.management.AdminServer.<init>(AdminServer.java:110)
at weblogic.management.Admin.initialize(Admin.java:216)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:354)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
at com.objectlearn.wlserver.integration.Server$1.run(Server.java:55)
at java.lang.Thread.run(Thread.java:484)
--------------- nested within: ------------------
weblogic.management.configuration.ConfigurationError - with nested
exception:
[java.lang.ClassNotFoundException:
weblogic.management.descriptors.ejb11.AdminServerMBean]
at
weblogic.management.internal.Helper.getAdminOrConfigMBeanInfo(Helper.java:11
7)
at
weblogic.management.internal.ConfigurationMBeanImpl.<init>(ConfigurationMBea
nImpl.java:103)
at weblogic.management.AdminServer.<init>(AdminServer.java:110)
at weblogic.management.Admin.initialize(Admin.java:216)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:354)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
at com.objectlearn.wlserver.integration.Server$1.run(Server.java:55)
at java.lang.Thread.run(Thread.java:484)
Reason: Fatal initialization exception01. Save the AppleScript code as an 'Application Bundle', via 'Script Editor's 'File, Save As...' menu items' 'File Format:' popup buttons' 'Application Bundle' menu item.
02. In 'Finder' - '<control>' click (or right click, if using a multiple button mouse) on your just saved 'Application Bundle' application, and select the 'Show Package Contents' menu item. A window containing a folder 'Contents' will appear.
03. Double click on the 'Contents' folder. A Window, titled 'Contents' will appear.
04. Using 'Property List Editor' (installed when installing 'Xcode') open the file 'Info.plist'. A window titled 'Info.plist' will appear.
05. Click on the disclosure triangle (which is pointing to the right) to the left of 'Root'. The disclosure triangle will point down, and the contents of 'Root' displayed.
06. Click on 'Root'; the 'New Sibling' button will be renamed 'New Child' and will become enabled ... or ... Click on any item below 'Root'; the 'New Sibling' will become enabled.
07. Click on the 'New Child' or 'New Sibling' button.
08. Enter 'LSUIElement' (without the single quote marks), and then press either the '<tab>' or '<return>' key. The entry may jump to a new position.
09. Locate the 'LSUIElement' entry row (listing), and under the 'Value' column click twice, enter '1' (without the single quote marks), and finally press the '<return>' key.
You should now see (under 'Property' 'Class' 'Value' respectively) ...
LSUIElement String 1
10. Close the 'Info.plist' window. A drop down sheet will appear. Click on the 'Save' button.
11. Quit 'Property List Editor'. -
Trying to run in FPGA mode with VCS Diag fails
I am trying to run OpenSparc with vcs in FPGA mode. The command I used is
sims -sim_type=vcs -group=thread1_mini -novera_build -novera_run -max_cycle= 50000 -config_rtl=FPGA_SYN -config_rtl=FPGA_SYN_NO_SPU -config_rtl=FPGA_SYN_1THREAD
The Diag I used is bypass_win.s The status.log shows it failed
When I remove FPGA option the diag pass.
Can anyone please let me know which diag I should use in FPGA mode.
I wanted to remove latches so I use FPGA_SYN. Also, is it necessary to run FPGA using script rsynp.
Can I synthesize the design other than Simplicity.
Thanks
UpendraHi Durgam,
Thanks for quick reply. I use these options but sim fails at compile time
[upendra@dev2 sim]$ sims -sim_type=vcsi -group=thread1_mini -novera_build -novera_run -max_cycle=50000 -vcs_build_args=FPGA_SYN -vcs_build_args=FPGA_SYN_NO_SPU -vcs_build_args=FPGA_SYN_1THREAD
sims -sim_type=vcsi -group=thread1_mini -novera_build -novera_run -max_cycle=50000 -vcs_build_args=FPGA_SYN -vcs_build_args=FPGA_SYN_NO_SPU -vcs_build_args=FPGA_SYN_1THREAD
sims: ================================================
sims: Simulation Script for OpenSPARC T1
sims: Copyright (c) 2001-2006 Sun Microsystems, Inc.
sims: All rights reserved.
sims: ================================================
sims: start_time Tue Nov 25 15:03:26 PST 2008
sims: running on dev2.liga.local
sims: uname is Linux dev2.liga.local 2.6.9-11.ELsmp #1 SMP Wed Jun 8 17:54:20 CDT 2005 i686 i686 i386 GNU/Linux
sims: version 1.262
sims: dv_root /pub/upendra2/t1_1.6/sim
sims: model_dir /pub/upendra2/t1_1.6/sim/OpenSPARC_model
sims: tre_search /pub/upendra2/t1_1.6/sim/2008_11_25_1/tre/sims.iver
sims: Frozen tre_search /pub/upendra2/t1_1.6/sim/tools/env/tools.iver
sims: processing diaglist /pub/upendra2/t1_1.6/sim/verif/diag/master_diaglist () ..
sims: processing group thread1_mini
sims: using config file /pub/upendra2/t1_1.6/sim/tools/src/sims/sims.config ()
sims -nosimslog -sim_build -novera_build -sys=core1 -vcs_rel_name=thread1_mini_2008_11_25_1 -novera_run -max_cycle=50000 -vcs_build_args=FPGA_SYN -vcs_build_args=FPGA_SYN_NO_SPU -vcs_build_args=FPGA_SYN_1THREAD -nosas -novcs_run
sims: ================================================
sims: Simulation Script for OpenSPARC T1
sims: Copyright (c) 2001-2006 Sun Microsystems, Inc.
sims: All rights reserved.
sims: ================================================
sims: start_time Tue Nov 25 15:03:27 PST 2008
sims: running on dev2.liga.local
sims: uname is Linux dev2.liga.local 2.6.9-11.ELsmp #1 SMP Wed Jun 8 17:54:20 CDT 2005 i686 i686 i386 GNU/Linux
sims: version 1.262
sims: dv_root /pub/upendra2/t1_1.6/sim
sims: model_dir /pub/upendra2/t1_1.6/sim/OpenSPARC_model
sims: tre_search /pub/upendra2/t1_1.6/sim/2008_11_25_1/tre/sims.iver
sims: using config file /pub/upendra2/t1_1.6/sim/tools/src/sims/sims.config ()
sims: using random seed 3932776618
sims: creating model directory /pub/upendra2/t1_1.6/sim/OpenSPARC_model/core1/thread1_mini_2008_11_25_1
sims: setenv VERA_LIBDIR /pub/upendra2/t1_1.6/sim/OpenSPARC_model/core1/thread1_mini_2008_11_25_1/vera
sims: LM_LICENSE_FILE : /apps/mentor/modeltech/license.dat
sims: Building rtl model
sims: Caught a SIGDIE. sim_build_cmd not defined at /pub/upendra2/t1_1.6/sim/tools/src/sims/sims,1.262 line 2456.
sims: Caught a SIGDIE. Could not build model for regression at /pub/upendra2/t1_1.6/sim/tools/src/sims/sims,1.262 line 1281.
I looked at DVGuide. In section 5.3 "Additional FPGA Support in OpenSPARC T1" section It talks about +define. then I serch sims script & found -rtl_config option which I previously used. But with this option the diag fails.
What should I use in order to compile & run successfully. Pl. let me know.
Thanks,
Upendra -
While running script adstpall.sh , addisctl.sh gives message.
while running script adstpall.sh , addisctl.sh gives message that
" OAD is stopped
OSAGENT is stopped
LOCATOR is stopped
Unable to stop gatekeeper. No process id file found.
session id 20136 is not running
......................................hi,
The issue not with /usr/bin/local. When you excute root.sh, it will try configure the ASM with New GRID HOME. Issue started, whent tried to start
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting <<=================================================================
acfsroot: ACFS-9320: Missing advmutil.
Please let us know the below details
==> Acfs is configured the servers??
==>acfsutil registry
acfsutil info fs output.
==> With out ASM instance , How the database, CRS STarted ???
==> Please try stop and start the crs.
==> crsctl query crs activeversion output
Regards
Krishnan
Maybe you are looking for
-
Components are invalid after the execution of utlrp.sql
Hi All, I have migrated one database from the version 10.2.0.4 to 10.2.0.5, After the execution of upgrade script all components are found as valid, and then I executed utlrp.sql and at the end of this execution some of the components became
-
Select double * from database table?
Hi, See the entries in the following database table. TABLE1 F1 -- F2 -- F3 -- F4 -- F5 etc.., AB 12 de effd 32e CD 34 fr wref 45fr EF 34 rfr wfrf wfwrf Here I need to get the two values of F1 field. Those are AB an
-
Non leading ledger (V3) shows wrong fiscal year
Hi All, I am using leading ledger for USA (K4) and Non-leading ledger for local GAAP, India (V3). while posting into Asset Accounting, it is recorded properly bu when i am executing report for Asset accounting, i am geting the information in V3 for 2
-
Error while distributing the ALE distribution model through BD64
Hi, I am getting the error while distributing the distribution model through BD64. The error is as follows: "Model view DVGDVH has not been updated Reason: the following ALE connection already exists in model view TESTMOD". What does this means? Rega
-
Jdev 11g: question about dvt:shapeAttributes and property "alt"
Hi, Jdev 11.1.1.0.2 I use dvt:shapeAttributes> within a declarative component. This code works fine: <dvt:shapeAttributesSet> <dvt:shapeAttributes component="GAUGE_INDICATOR" alt="Your Tooltiptex