Trying to use Two Speakers IN Two Jacks on an X-Fi. Microphone Question As We

I just bought the X-Fi Fatalty Champion Series card, with the front dri've. Love the sound quality and the novelty of the front control set-up, but having a few major problems.
. I can't seem to connect my two powered speakers to two different jacks correctly.
I have two powered monitor speakers. Both have /4" outputs, so I'm using two /4" to /8" cables so they'll work with my card. However, I can't get them to work correctly in two separate jacks. They do produce sound, but not at the same levels, or as "Right Speaker and Left Speaker"
Example.
Left Speaker into Line Out
Right Speaker into Line Out 2
I can't get them to function as a stereo (Left Right) pair (which is very important to me). Yes, they both make sound, but the Left Speaker is extremely dominant. About 75% more dominant in fact.
How can I plug both my speakers to the card to get what I'm looking for.
2. I can't get the microphone jack (front or back) to record, or work correctly.
I can plug a mic in, and hear it in my own speakers (or headphones. I've tried both), however recording in Windows sound recorder, or using voice chats like Teamspeak... nothing. I can hear myself, but others can't. What do I need to do in order to use a microphone correctly with the sound card? What are the exact settings from Windows Start Menu to finish that I need to follow (if any)?
I'm very frustrated, and have given myself a few gray hairs over these matters today. I played around with settings and combinations for close to 2 hours today.
If anyone can help me, I'd be thrilled.
Thanks in advance
-Z

You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

Similar Messages

I am trying to use two very long (2.5 hour HD) clips in multicam but FCPX only places one clip right after the other and does not create multicam. Is there a limit on clip size for multicam?

I am trying to use two very long (2.5 hour HD clips) and a 2.5 hour audio clip in multicam. One clip and the audio will ceate a multiclip but two clips will not. FCPX simply adds the second clip on at the end of the first. There must be some sort oflimitation on clip length. Is that correct and if so what is it?

The Angle field is not shown in the Inspector's default Basic View. With the clip selected in the event viewer, select the Info tab in the inspector. Change the view of the inspector from the default Basic View to the General View to be able to see the Angle field.
I assume you want to use the audio to do the sync. If FCP X has trouble syncing the audio, you can set a marker at the same chronological point in each clip before creating the multiclip. Then set Angle Syncronization to First Marker on the Angle and keep Use audio for syncronization checked. Your marker only needs to be close to get FCP X started. It will then use the audio to get final sync.

I have an Apple Ipad Air. I'm trying to use two bluetooth earphones at the same time. Can it be done?

I have an Apple Ipad Air. I'm trying to use two bluetooth earphones at one time. Only one works at a time. Can two be used at the same time? If so how do I get them to work?

The likely reason no one can connect to the mini when it is connected to your work VPN has more to do with your work than your home set up. The administrator at work would have to decide to allow for "split-tunneling", thereby allowing your mac to be connected to work and the outside world simultaneously.
More here: http://en.wikipedia.org/wiki/Split_tunneling
Talk to the network admin at work.

Trying to use two framegrabbers at once

I am trying to capture images from two different framegrabbers simultaneously and I have been partially successful. There is just one odd behavior that I don't understand. If I start acquisition on camera 1, then on camera 2, they both work and I can see both images in WindView windows just fine. The problem is, if I stop acquisition and exit the VI for camera 1, the camera 2 VI dies saying that the interface or session is invalid. It appears that stopping acquisition on my first camera somehow intereferes with the IMAQ session for the second camera. How can I avoid this problem?

The framegrabbers in question are the 1422 and the 1428. The cameras are custom designed and built for us. The two cameras are not syched together in the lab. I can start either camera's acquisition first -- if I stop whichever one I started first while the other is still acquiring, the error occurs. I have attached the two VIs that I'm using. They both used to have an IMAQ close at the end, but I removed them to see if that was the problem.
Attachments:
Mira View.vi ‏141 KB
Spectral View.vi ‏169 KB

Trying to use two seperate video clips on one consecutive screen.

I'm very new to this but I'm trying to get these two video clips I have, and set them side by side on one screen so both clips are showing at once. Can anyone help me? Thanks!

put the 2 clips one above the other on the timeline
press w ( to change your Canvas view to Image and Wireframe )
select upper clip in the timeline and note the wireframe outline that then appears in the Canvas
click and drag a corner of that wireframe to resize (scale) the image as you would like
click and drag within the wireframe to re-center as needed.
select the lower clip in the timeline and then repeat the resize and re-center process
as Mr Certified so eloquently pointed out, these scale and center parameters can also be found and manipulated (somewhat less intuitively) in the Motion tab if you load up each clip into the Viewer

Weird issue when trying to use two computers on the same network.

Hi all...i just just moved house and i'm using a different connection with my time capsule.
basically i've just plugged the modem into the ethernet port on the timecapsule as usual, and now for some reason me and my partner cannot use the computers to access the net at the same time
my access will halt as soon as he starts, and the only way to gain access again is to renew the DHCP lease, which subsequently boots him off....
anyone know how to fix this?

it's a wireless modem. not like a usb stick with a 3g connection. it's called unwired here in australia....its crap, but im using it for the next few days until my cable connection is installed at the new house.
it's pretty much the same as a regular modem and has an ethernet port on it which you can either use to connect directly into your system, or plug into a router or wifi (or in my case, time capsule which i'm using as the wireless base station)
i've just done the usual thing of plugging the ethernet cable from the modem into my time capsule, and it seems to work fine as long as it's only one user on the network. but as soon as someone else jumps in, their system gets access and mine stops. the only way to get mine working again is to renew the DHCP lease in networking preferences, but that ends up booting the other person off.
i havent changed any settings at all and we never had this issue at the old house...so i'm not sure if its some configuration with the time capsule, or if it's something weird about the dodgy modem i'm using...

Get -3256 error when trying to use "multiple speakers" in iTunes

I have had a LOT of Airport problems since switching to Leopard. For the moment, the Airport does seem to now work. I use an Airport Extreme 802.11n, and an Airport Express using WDS. I had a TON of problems with my MBP connecting, running great, then slowly losing bandwidth. For the moment, all is working. The next hassle was that my formerly working WDS stopped working. Now, the base station says WDS is happy. iTunes show the Airport Express is available to broadcast to.
It lets me select multiple speakers, but then gives and error -3256.

I think that I just solved your multiple speaker issue in another post; check out: http://discussions.apple.com/thread.jspa?messageID=5765343&#5765343. Hope this solution works for you too.

HT201272 I have been trying to use my money for well over a month but iTunes want questions its a voucher not my bant accaunt I wouldn't trust you with my bank account you manage to make me feel like a criminal trying to get my On my way! Money I phone

All I want is to use my voucher and this is really annoying me I phoned your sercerity some time ago and answered there questions on the phone but the same questions on the iPad won't work I've been made to feel like a criminal it's a voucher not a bank account I had put voucher in before with no problems until this stupid question came up now I don't have there phone number I did phone someone but I think she had problems understanding English in not the criminal here I'm not the one holding my money you lot are

We are all itunes users just like you. We are not Apple.
You can reset your security questions.
Rescue email address and how to reset Apple ID security questions

Error -50103 when I am trying to access two channels on USB 6366 board in the same time

I am trying to use two DAQmx tasks attempting to access two channels from
USB-6366 in the same time. But it gives me an error Error -50103. So I looked
online and find out it says ' It is not possible to have multiple DAQmx tasks
attempting to access the same physical device. '. So I am wandering how can
collect data from my ai0 and ai1 channels in the same time? Here is my code,
and please help me out. Thanks very much
Attachments:
error_-501013.vi ‏27 KB

Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

Using imac speakers on a G5

Hi there
I was going to use the speakers that came with my wife's imac (G4) with my Mac G5. I realised, however, that the speakers have a 2.5" jack whereas the only audio output socket on the G5 is 3.5". Has anyone else tried to use these speakers with a G5 (they're those white rounded ones) and where do you buy the adpator from that I will need to convert the 2.5" jack into 3.5" (sneekily, there is a short metal round section at the bottom of the jack which means that a normal adaptor from Maplins or wherever won't work!

Hi, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
There is some discussion of this issue here
http://discussions.apple.com/thread.jspa?messageID=596824#596824
and here
http://discussions.apple.com/thread.jspa?messageID=3003331#3003331
As the solutions mentioned are either discontinued or expensive (or both), it would probably be easier to invest in an affordable powered 2.1 speaker system that will connect to the analogue audio-out port on the G5, such as
http://www.logitech.com/index.cfm/products/details/GB/EN,CRID=2173,CONTENTID=122 45
- or a not-so-affordable digital 5.1 system with optical audio-in that can use the optical audio-out on the G5, such as
http://www.logitech.com/index.cfm/products/details/GB/EN,CRID=2177,CONTENTID=948 6
No specific product recommendation intended - you will receive as much advice on competing speaker systems from this Forum as you can use, should you require it...
Good Luck.

Can I use the speakers on my Thunderbolt as well as my Computer at the same time?

I am trying to use the speakers on my iMac as well as the speakers on the Thunderbolt display. Any one know a way to accomplish this?

This cannot be done on any iMac. For whatever reason,
there can only be one audio output. There may be some
third party work arounds, but for a stock system it cannot
be done. This is nothing new and applies to pretty much
all Macs.

Can I use two audio devices on a macbook pro? I.e Headphones and the built in speakers

So I have Mumble (voip) running, and Spotify at the same time. I use apple headphones to talk to people on mumble but i want to use my speakers to listen to music on spotify. Is there a simple way i can set this up?

Radio Shack sells a splitter that plugs into the single jack then provides two jacks for two headsets at the same time. Provided you got a set of speakers with the appropriate matching impedance you could connect them to one of the two output jacks on the splitter.

We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it

We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!

No guarantess but try smc and pram resets,

I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other ap

I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other apps but photoshop no. Any ideas?

I don't think I can access the crash report? Excuse the ignorant questions I'm about to make am a relative tech novice.
Soo - as mentioned every time I open photoshop it crashes - it just says there's an error and the program will shut down and if there's a solution windows will notify me. Then nothing...
I've tried to look in photoshop files for the detailed crash report & the system event viewer but cannot find a file with those names. I've also looked in the windows files for files with those names but cannot find them either - so I don't know where to look.
Any guidance would be great.

Is it possible to use two speakers with one Apple Tv ?

Hello everyone,
I bought an Apple Tv and I have one apple express with a Bose speaker and a Bose Link Air speaker.
I would like to see a movie using the two speakers but every time that I try to select two speakers in the airplay Apple Tv menu, it automatically deselect the other speaker.
Is it possible to use two speakers in the same time ? ( I know it's possible with Itunes)
Thank,
Ps: I have the last Apple TV

No, that is not possible with Apple TV. You can set one 'output' via Apple TV, and 'stream' to multiple speakers from iTunes or via the remote app.

Trying to use Two Speakers IN Two Jacks on an X-Fi. Microphone Question As We

Similar Messages

Maybe you are looking for