TS1286 I need to know about the unknown error 0xE800000a for a windows computer.

There is no info for how to fix the unknown error 0xE800000a for a windows system. If an article on this could be made I would greatly aprreciate it.

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Similar Messages

I need ti know if the macbook has backlight for the keyboard

i need to know if the macbook ha backlight for the keyboard.thanks

Only the 2.4 GHz Macbook Aluminum comes with backlight for keyboard.

5 Things MSPs Need to Know about the Windows 10 Upgrade Launch This Wednesday

This Wednesday, July 29th, Microsoft will officially launch their new Windows 10 operating system for both business and home users.If your non-enterprise end users have either Windows 7 or Windows 8.1 installed on their devices, they are eligible for a free upgrade up until July 29, 2016 - a full year after upgrading. As MSPs, however, youmay be hesitant to immediately roll out Windows 10, since it likely still has bugs to be corrected. Unfortunately, with its release date imminent, there's been widespread anxiety about clients receiving upgrade notifications and worse, installing Windows 10 without consulting their IT department, IT solutions provider, and/or MSP. If you've been uneasy about Microsoft's latest launch and want to know how to best prepare yourself for July 29th,keep reading!How have you been preparing for the release?...
This topic first appeared in the Spiceworks Community

Let's get physical (or virtual)!Hey SpiceHeads, this week's theme forOn the Air (Wed. 10am CT)is "Thin is In!"Ok so we're really talking about thinclients and VDI, but getting in shape is important for everyone, including your IT environment.What area in your IT environment or department could be in better shape? And what exercise program/diet/weight loss gimmick would you prescribe?Does that tangled network cable mess of blue spaghetti in your data closet need to go on a low-carb diet?Does your storage solution need to get off its fat, lazy NAS?Wish you could send angry users to yoga (or boot camp) before they submitted tickets?Let us know below and you could win a swag bundle (below) fromHP! Then don't forget to check us out on7/29 at 10am CTand find out who the winners are.

HT4651 What do I need to know about the Flashback Trojan?

Reading about the Flashback Trojan malware. How can I check to see if I'm infected? Could it be what's causing Youtube to run badly?

A good place to start is looking over the other numerous threads on the subject. Please look to your right under More Like This and you will find many other threads.

I need to know what the part number is for a replacment hard drive chasis - 8460p

I need to order a replacment chassis that the hard drive screws into for the 8460p, does anybody know the part number for this piece?

Hi:
You are going to have to contact HP for that--1-800-334-5144.
The only parts listed in the service manual are for the actual hard drives.
Paul

Anybody know about the following error message? E_AUTH_BAD_DEVICE_KEY

Hi i am getting the error message above when trying to activiate digital editions and link with my ereader.
I registered with adobe today, plugged the ereader in and it came up with this message after entering my log in details. I tried registering again with a different email address but same message again.
I have tried to phoen adobe but the automated number asks for a serial number which i cant find on digitial editions anywhere. and i cant see any kind of email ro chat help available either.
any help greatly appreciated!
Thanks

Hi Ginger!
Unfortunately, this 'ereader' stuff is more than plug-and-play. It starts
with techy stuff and then continues with some more techy stuff until you're
reading the ebook. The message you're getting tells me that something is
messed up in the installation of either your ereader or your copy of ADE.
You didn't tell us what kind of ereader you're using or your computer type
and operating system. I can't 'assume' what ereader your have, but let me
'assume' that you've got a PC running Windows 7. Here goes....
If the ereader isn't registered, Adobe may generate the message you're
getting. You should make sure that your ereader has been registered with
its website. For simplicity, use the same ID and password for this as you
used to register with Adobe when you downloaded and installed ADE.
Sometimes when you do this, the ereader website updates the software
located on the ereader (not ADE - that's on your computer). And some of
these updates cause problems later on.
Once you have done the registration bit, you 'should' be ready to download
ebooks to your computer via ADE, and then transfer them to your ereader.
You go to the ebook website and follow their directions for downloading.
During that process, the website should activate ADE on your computer
automagically, and then you'll be asked what to do with the ebook: 'open'
it or 'save' it. I suggest saving it. If you choose 'open', the ebook
will be downloaded, but ADE will open it to read on your computer, and the
ebook won't appear in your library. If you choose 'save', then the ebook
will be saved and entered in your ADE library. That's the basic process.
Using the ereader isn't supposed to be hard either. You would plug it into
your computer and make sure that the computer 'sees' it attached. The
ereader should have a drive letter if you display your computer's
information using My Computer or Windows Explorer (NOT Internet Explorer),
and the ereader should display a message saying that it's connected to the
computer. After this is done, you can start ADE. During its startup
process, ADE will look for attached ereaders, and when it is finished
starting up, it will display the ereader on the bookshelf part (the left
panel) of its Library view. Now the easy part. You just drag and drop the
ebook you want to transfer from your ADE library to the ereader on the
bookshelf.
Adobe help is not necessarily helpful. You don't have a serial number
because ADE is a free product. The Adobe tech's sometimes don't want to
help you because ADE is a free product, and will tell you that you'll have
to pay for service. Baloney. If you get someone on the phone or in a chat
session, tell them that you are a Digital Editions user, and that help for
this product is free from Adobe.
Hope this helps!
=============

How do you solve the unknown error (1) for the iphone 3gs?

tried to restore my iphone 3gs because its stuck in recovery mode and an unknown error (1) keeps occuring. Anyone with help?

Perhaps this support article will help:
http://support.apple.com/kb/TS3221
Regards.

I need to know about the favorites.

Google Chrome just changed the favorites. So that they have pictures and not just the link. I cannot find anything now. I was wondering what the favorites page looks like. I would also like to know if I got a new computer and I re-downloaded firefox if It would keep all of my favorites

You should be able to import Google Chrome favourites in to Firefox, assuming of course they still exist and are not lost or corrupt in Chrome.
* [[Import bookmarks from Google Chrome]]

Inquire about the best laptop specifications for Developing Windows Apps and 3D modelling Animation using "Kinect for Windows v2"?

I need some help in choosing laptop that is most compatible with "Kinect for Windows v2"; in order to develop Windows Apps, and 3D modelling Animation and Character Design. Which is better (Specifications):
HP Pavilion Notebook PC 15-p150ne
AMD A10-5745M +
AMD Radeon R7 M260 (2 GB DDR3L dedicated) +
4 GB 1333 MHz DDR3, OR
HP Pavilion Notebook PC 15-p034ne
Intel Core i5-4210U + NVIDIA GeForce 840M (2 GB DDR3 dedicated) + 4 GB 1600 MHz DDR3L

The second system with the Intel chipset will more than likely have the Intel USB3 chipset required for Kinect. As for GPU they are similar, but the i5 with DDR3 1600MHZ ram is a better option. Keep in mind, if you are doing anything in-depth for
3D, a laptop isn't the best options, but if you have to go mobile then you have to decide what is best for your requirements.
Carmine Sirignano - MSFT

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

this sub forum is about running windows on macs maybe you should try
https://discussions.apple.com/community/notebooks/macbook

I'm thinking of buying an ipad wifi for my mom who lives in Kenya. Any issues I need to know about? Will the ipad work ok?

I'm thinking of buying an ipad (1) wifi for my mom who lives in Kenya. I understand the charger is universal and will work with an adapter. Any other issues I need to know about? Will the ipad work ok?
She is 68 years old and has vision problems. My thought is that it would be eaiser for her to see than a ipod touch. She would use it for music, maybe reading, some games. I'm not sure she would be adept enough to download many apps, so we'd prbably load it up for her.
Thanks for any input!

She's going to need to update and at some point restore the iPad which requires a computer.
For vision problems she can enable zoom. Tap Settings / General / Accessibility.

Everything you need to know about Foxtel Go

Foxtel on T-Box customers can self register Foxtel Go on 2 devices per Foxtel on T-Box subscription. You are able to view content on 1 of the 2 registered devices. The T-Box device will automatically be registered on your behalf and cannot be deregistered. You can change the device they have registered once per calendar month.
To change a registered device you must log into the Foxtel Go app. As a Foxtel from Telstra customer please use your Foxtel My account details. As a Foxtel on T-Box customer please log in with your primary (i.e. the first username created and linked to your account) BigPond username and password.
Once in the app go to the settings icon and choose 'manage my devices'. Within this section of the app you will be able to select de-register for the device you wish to change. To register, download the Foxtel Go app and log in. You will be prompted to register the device.
Remember you can only change one device once per calendar month. If you are still able to make a change, you will be advised of the number of device registrations left this month.
If you recently registered your T-Box, you should have access to Foxtel Go within 1 hour. If you are experiencing errors please try closing the Foxtel Go App and logging in again. If you are still unable to access any content please contact us via Telstra 24x7 or Telstra Technical Support on 13 22 00
If you swap your Foxtel on T-Box service to a new device, your Foxtel Go service is not affected as it is associated to your BigPond username and password, and not the T-Box device.
When trying to make a second device change within a month the de-register' button will be greyed out, preventing the change.
Current channel rights only allow Foxtel Go to be registered on 3 devices per Foxtel Account. For Foxtel on T-Box customers, the T-Box counts as your 3rd device.
The parental control function is specific to Foxtel Go and managed in the app via the settings icon. To access parental control:
Go to the settings' icon in the app (top right)
Access parental controls'
Choose which classifications you'd like to restrict
All R-rated content is automatically blocked, but you can personalise your restrictions for other ratings. To do this go to Settings in the Foxtel Go app, turn on Parental Controls and restrict the classifications you would like to block. If this is the first time you do this you'll be prompted to set a 4 digit PIN specifically for Foxtel Go. You can use this PIN to change your parental controls in the future. This PIN is only applicable to the Foxtel Go app. For Foxtel from Telstra customers, the PIN is not the same as you use on your IQ or Set Top Box, and you will be required to setup a new PIN to restrict content on Foxtel Go. For Foxtel on T-Box customers, the PIN is not the same as you use on your T-Box, and you will be required to setup a new PIN to restrict content on Foxtel Go.
Foxtel Go content is unmetered with Telstra BigPond Home Broadband services. With other internet service providers this will be offset against your data plan.
If you use Foxtel Go on your device with any 3G/4G telecommunications service provider, including Telstra, usage isn't unmetered and you will incur data charges when using Foxtel Go. The below list provides an indicationof the data you will use per device on the various app settings, based on watching an hour of TV. To view your settings go to the 'settings' icon in the Foxtel Go App, turn on 'video settings' and choose your preferred quality:
3G Phone/Tablet Best: 320 MB per hour / Low: 170 MB per hour
Wi-Fi Phone Best: 420 MB per hour / Low: 320 MB per hour
Wi-Fi Tablet Best: 720 MB per hour / Low: 320 MB per hour
Wi-Fi PC/Mac Best: 1310 MB per hour / Low: 470 MB per hour
The size of each episode or Movie on Catch up TV can be found on the Synopsis tab.
You can use Foxtel Go at a Wi-Fi location or a personal hotspot when you are in Australia provided you have an internet connection. Some locations offer Wi-Fi hotspots where you can log onto the internet for free. e.g. McDonalds, Starbucks, etc. Any data charges incurred are charged to the business and not to you. When connected to Wi-Fi, you'll see a Wi-Fi symbol on your device.
Foxtel from Telstra customers with a Foxtel iQ or iQHD set top box can Remote Record and send a channel change to their set top box. Unfortunately this functionality is not available to Foxtel on T-Box customers.
You can pause and rewind the last 30 minutes of Live TV, even if you've just changed to that channel. Due to device restrictions users of Samsung Android devices are unable to use this feature.
Foxtel Go is a streaming video service. Streaming means that images and sound are delivered live to your device to view when you press Play, rather than being downloaded to your device to view at a later time.
Games you'd normally see on Foxtel from Telstra or Foxtel on T-Box on FOX SPORTS 3 are broadcast on Foxtel Go on the Footy Play Plus channel
There are no Catch Up of AFL games or magazine shows on Foxtel Go due to content restrictions.
The key symbol indicates that a channel isn't part of your package. You need to upgrade your Foxtel from Telstra or Foxtel on T-Box package to watch it. Your package can not be updated through the Foxtel Go app. For Foxtel on T-Box customers you can update your packages in the T-Box App, at www.telstra.com/tboxsetup, via 13 2200 or in store. For Foxtel from Telstra customers you can update your packages through the store or via 13 1999. The lock symbol indicates that, as part of your parental control setting, you've locked this classification of content, and can't watch it. If you want to change the settings then the primary (i.e. the first username created and linked to your account) account holder can change these by:
Go to the settings' icon in the app (top right)
Access parental controls'
Choose which classifications you'd like to restrict
No other username or password can change the parental control settings.
We may be required to block out specific programming from time to time, e.g. if a channel doesn't have the legal right to broadcast the programme over the internet. However, all live channels are the same as channels you watch through Foxtel from Telstra or Foxtel on T-Box.
The vast majority of the Foxtel on T-Box content is available via Foxtel Go. There are some minor exceptions. MTV Music and MTV Dance channels are not available. FOOTY PLAY and FOOTY PLAY+ (overflow) channels are not available on PC and Mac only.
Access to Foxtel Go is included in your Foxtel on T-Box and Foxtel from Telstra subscription. However, you will incur data charges when accessing the service on a 3G/4G network.

Re: Everything you need to know about Foxtel Go
Iam book in to have foxtel install on 2nd of March was offered Thursday the 28 my appointment has been cancelled so can be home Thursday I put a complaint in as was told it was 1hour for change over from T Box but no one has got back to me

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

FAQ: I already have a Revel account. What do I need to do? What do I need to know about this?

Q: I already have a Revel account. What do I need to do? What do I need to know about this?
A: If your Revel account uses the same Adobe ID as your Photoshop.com account, your JPEGs will be moved there. Otherwise, a new Revel account will be set up for you using the same Adobe ID you use with your Photoshop.com account.
Revel accounts can be merged manually. Use the Adobe Media Downloader to download all of the JPEG photos from your Photoshop.com library and then upload those photos to your existing Revel account.
Click here to archive your Photoshop.com library so you do not lose any files.
You will be asked to download an Adobe Air application called Media Downloader

Your .mac Mail account will continue to operate normally as long as you access the account from the Mac's Mail program. Read this:
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30th, 2012.
iCloud is a collection of features that allows you to sync Safari bookmarks, Calendar items, Contacts, and iWork documents (Pages, Numbers) among multiple devices, among other things. Your photos in iPhoto will not be affected.
iCloud is most valuable for people with iOS devices and Macs and requires OS X 10.7 "Lion".
Here is some more information: http://www.apple.com/mobileme/transition.html

I NEED TO KNOW ABOUT DRIVING TABLE...PLEASE

Well, My name is Adan. I am from Panama.. my english is not
good. But I'll try. I need to know about driving tables and how
have to choose a driving table and how optimizer proccess an sql
statment.
Example:
Employees have (1,000,000 rows),
dept have (100 rows)
Category have (100 rows)...
I need retrieved all employees with category and dept name for
those employee with salary > 100000
Well, What is the driving table and where i have to put this one
in the from clause ? What about order in the where predicate...
First ?
Select E.name, C.category, D.Departement
from Employees e, dept d, category c
where
and d.cat = c.cat
and e.deptno = d.deptno
and e.salary > 100000
Last ?
Select E.name,C.category, D.Departement
from dept d, category c ,Employees e
where
and d.cat = c.cat
and e.deptno = d.deptno
and e.salary > 100000
I apreciate your help....Thanks and sorry for my english....
Bye..

Adam,
If you set your optimizer = choose and analyze the tables and
indexes to generate statistics, then your system can use the
Cost Based Optimizer (CBO) and, like David said, it will
automatically choose the best access path, and the order of
things will not matter.
If your optimizer is not set to choose or if there are no
statistics, then it will use the Rule Based Optimizer (RBO), in
which case, the only thing that matters is the order of the
tables in the from clause. When using RBO, the driving table
should be at the end of the from clause, in the right-most
position. The driving table is the one such that, after the
restrictions have been applied, returns the smallest number of
rows. You would have to compare the number of rows in the
employees table where salary > 100000 to the number of rows in
the dept table (100) and the number of rows in the category
table (100).
In RBO, if there are more than 100 rows in the employees table
where salary > 100000, then your from clause would be:
FROM employees e, dept d, category c
In RBO, if there are less than 100 rows in the employees table
where salary > 100000, then your from clause would be:
FROM category c, dept d, employees e
This is all that applies to the example you have given, however
there are other things that can apply in other situations. For
example, if there is an outer join to a table, the table that
has the (+) cannot be used as the driving table.
Barbara

TS1286 I need to know about the unknown error 0xE800000a for a windows computer.

Similar Messages

Maybe you are looking for