TS1367 i lost my install disk and all the applications are damaged including my software mac os x

i lost my reinstall disk and all my applications and softwares are either damaged or incomplete i cant find any link to install my startup disk

you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/

Similar Messages

I just used a firewire connection to transfer files from an older MAC to a newer MAC. My newer MAC has lost all that was on it, and all the applications are opening like they have never been used before and asking for Rosetta. Help!!!

I just used a firewire connection to transfer files from a PowerBook G4 to a MacBook Pro. The MacBook Pro has lost all that was on it, and all the applications are opening like they have never been used before and asking for Rosetta. How do I find all my files on the MacBook Pro, or undo what I have done???

IGNORE the last post: he thought you are using Lion or Mountain Lion.
Since you are using Snow Leopard, you need to install Rosetta. It can be found on your Snow Leopard Install DVD in the Options section.
Once installed all should be well again.
Also, if your computer is connected to the internet when the Dialog Box about PowerPC applications comes up, it MIGHT allow you to download Rosetta from the internet. There has been some discussion that Apple has discontined internet download of Rosetta into Snow Leopard.
Someone else will have to address your lost files problem.

HT204382 what software do i need to play movies on avi file . have connected a external memory disk and all the movies are in avi format.

What software do i need to install in order to be able
to play movies in .avi format.
have connected an external memory and all the entertainment
files are in .avi format.
Ansver i get : does not support

VLC is a good choice. While I don't know if it will play your files, Perian is a helper app for Quicktime which allows you to play a lot of things in the Quicktime Player.
There is also Flip4Mac which allows you to play windows media files in Quicktime.
Finally, note that the extension on a video file doesn't really tell you what you need to play it. The .avi, .mpg, etc. is only the wrapper around the actual video. The video is encoded by some means and needs to be decoded. The video inside the .avi can be encoded in one of many different schemes.
VLC, Perian, Flip4Mac, and many others, are all able to decode various flavors of encoding. Having all of those in your toolbox will help to allow you to play most of the things you'll find.

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back-up app.

I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
Have used Superduper app. to back up and checked back-up occasionally to see if all files present and appeared OK.
I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
Running iMAC System 10.4.11
How can I successfully download from the Maxtor back-up?
Ivan

Further info.
I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
Solved the Stickies problem by using Spotlight to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
Re Ical data loss. Used Spotlight to find iCal document in Library - Preferences where I found com.apple.iCal.plist in folder.
Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
So now I cannot tell which is the symbol iCal.plist
Thanks for leading me so far, but how do I find that plist for my calendar?

I had to redownload cs6 from another drive and all the files are there but it wont open any of it

i had to redownload cs6 from another drive and all the files are there but it wont open any of it

Copying/transferring will not work. You need to install the software using installation files.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

HT204379 I have pointed to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?

Hello,
I have just moved to mac and pointed my screen saver to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?
Regards,
Jan

finally found it
http://lifehacker.com/5711409/how-to-search-for-hidden-packaged-and-system-files -in-os-x
need app find any file
link at bottam

My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good

My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good

I suspect someone or something in your house may have changed a keyboard preference. Try System Preferences - Keyboard - Keyboard tab - uncheck Use all F1......

My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic

my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
any help please im going out my mind
regards james

Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
Again thanks for replying
Regards James

HT4994 i have normal sim in Nokia and all the contacts are in it, how i can import them in microchip of iPhone 4S

Hi,
i have normal sim card in my old Nokia phone and all the contacts are in it, how i can import these contacts to iPhone 4S. The contacts are more than 1000, it is quite hard to transfer them one by one. Please help.

I did get a notice
that i couldn't import new photos to my MACBook a few days ago--not enough room.
How much free space do you have on your hard drive? - Note that you need an absolute minimum of 10GB at all times for normal operation of your computer
Deleteing photos probably is not the answer - you probably need to purchase an external hard drive and move your iPHoto library (and possibley iTunes library) to it - you can operate that way (be sure the EHD is always available when you launch iPHoto) or you can have a small library on your MB and use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to move photos between teh internal and external hard drive
ipmovel
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

White screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol

white screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol

Hello again V.K,
I'm taking the computer to assistance as suggested. Even tho I'm almost 100% sure that this isn't a hardware issue.
Here is why I'm not wasting my time on my affirmative. I'm computer science bacharelor, I know about computer architeture and S.O architeture and also I'm computer developer for more than 10 years now. All behaviors presented have no connection with hardware problems. What I'm trying to say is that I'm not just saying things for saying, I have a logic behind what I say.
For a short example, whenever mouse right click stops working on a specific window/software, if I click on the window top border and drag it around and go back to the window content, the click works again.
Also, my keyboard and mouse work via usb. Usb is working normally. If I plug a usb memory stick it shows that usb is working as it should be.
On windows, right button click is also not working inside any software window, but if I click on start button, icons on desktop, anything on windows epxlorer, it works as it should be. Isnt't there bootcamp underneath windows ?
on top of it, it's a brand new mac, i have it for 5 months.
All these people that have the same problem, do u think all of them have hardware issues? Do you think Apple would keep releasing new computers with hardware problems and they wont have any information/recall for them? and worst, the problems start in a random date ?
This is my first mac and all these problems, being hardware or not, makes me lose all confidence on Apple products.
Davi.

New PC lost origional install disk and unable to install using download

I got a new PC and have lost my install disk forr my Tunston T2. I tried to install using the download of version 4.1.4 from the website but no luck. When I try to open the program I get an error message "Palm Desktop Application has encurred a problem and needs to close".
I tried it without the device connected and with it connected and get the same error.
My PC has an Intel Core2 Quad CPU Q9400 @ 266GHZ with a 500G drive. I am running Windows XP Pro.
Does anyone have a clue how I can get it up and running?
Post relates to: Tungsten T2
This question was solved.
View Solution.

Sounds like your data crashing out palm desktop.
It's either your calendar or contacts causing the issue.
Steps to fix
1. Navigate to C:/program files/palm/Hotsync ID
2. In that folder locate another folder called datebook
3. Remove datebook.dat file from there and place on desktop
4. Go to folder called Address
5. Remove address.dat file from there and place on desktop
6. Attempt to open palm desktop
IF it opens continue
7. Go to tools/options and change the start up application from datebook to memos
8. Navigate to C:/program files/palm/Hotsync ID
9. In that folder locate another folder called datebook
10. Grab the datebook.dat file off of the desktop and place in the folder
11. Choose to overwrite the file
12. Go to folder called Address
13. Grab the address.dat file off of the desktop and place in the folder
14. Choose to overwrite the file
15. Relaunch palm desktop
16. Go to tools/options/tools
17. Select fix corrupted records.
18. Close palm desktop re open
Everything should work fine. If you want you can then change the start up application back to datebook.

Will resetting my Macbook Pro with the disk delete all the applications I have installed?

Hello all,
As a graduation gift, my parents bought me the Macbook Pro, but they forgot the Admin password they had set on it...So I did a little but of searching around and the Installation disk solution came up. I have the disk, but I was wondering if I did follow through with it, will it erase all the applications I have installed like Microsoft Word, PPT, and Excel?
Thank you.

See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

While trying to set up i cloud some of my contacts have been wiped out and all the contacts are showing up as numbers only, how to i fix this?

While trying to set up ICloud some of my contacts have been wiped out and all contacts are showing up with number only
How do I recover the lost contacts and get contact names to show instead on just number?

Shiv1611 wrote:
Though i am still gona try using the same Itunes. Will same Itunes support two apple ids.
That depends on what you mean. If you mean two iTunes Store accounts, no. Only one Apple ID can be logged into the iTunes Store at a time and if automatic download, iTunes Match or re-downloading of content is used the ID can not be changed for 90 days.
Shiv1611 wrote:
So i guess if i solve my goof up on creating different apple IDs and setting her phone as a new one .. according to you that shall do the trick.
But i have a question here in that case what happens to all the applications that have been purchased on my Id ? Wont i be needing them to be purchased/downloaded again in the new id?
If you previously had been using the same Apple ID for iTunes Store purchases for both of you there is no reason to change what you've been doing. If this is your wife's first iPhone, and you want to share the iTunes Store account just don't use the new Apple ID you created. As long as there are no purchases on it there's nothing to worry about.

HT204266 Some of my app are withot sound and all the buttons are on, what to do?

Some of my apps are without sound. All the buttons are turned on. What to do?

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

Just Installed Leopard and all my files are GONE!

Yesterday I installed Leopard and now all of my files are gone. I don't remember being asked how I wanted to install it...but on www.apple.com/support, it said that there were options like "Erase and Install." I don't remember choosing that, but if I had, is there any way to restore my files or does it do a zero erase of the hard drive? I don't have anything backed up, so thus far, I have lost 3 term papers that I was in the middle of and don't have anywhere else... Can anyone help?

Even with minor OS patches and updates, I don't rely on "just do it" but verify and repair, backup, and only then apply updates (and lately, waiting a week first).
Stop using that disk.
See if Data Rescue II demo can see anything or not (you should install 10.4.10 on another disk drive and work from there, guess you are now?)
Pre-existing errors that you weren't away of? If anything I've thought for a long time that installers should:
warn about and offer to backup
set a restore point in some manner
verify and repair the boot drive
( and this would be done in Single User Mode behind the back )
updates should be written to disk, but applied on restart, again in Single user mode
No weekly or monthly backup routine or schedule? no DVDs with your photos and papers? not in 3 yrs!!! kind of hard to understand you never heard of backups, or burned a DVD of documents for "safe keeping."

TS1367 i lost my install disk and all the applications are damaged including my software mac os x

Similar Messages

Maybe you are looking for