My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
any help please im going out my mind
regards james
Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
Again thanks for replying
Regards James
Similar Messages
-
Migration Assistant has been running since yesterday evening. My Dell is now telling me that its trying to reconnect to my Mac and to ensure they are both using the same network. I have an Ethernet cable plugged in them and they are both on the same WiFi. What can I do?
Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource -
About three weeks ago I dowsnloaded an update from you. Since then, whenever I type in MSWORD or in my Yahoo email account, the dursor jumps all over. In the beginning I did not have any idea what could be wrong. At a meeting the other evening, I mentioned the problem I was having and learned that several other people were having the same problem. The only thing that all the computers had in common was the Firefox down load. While typing this the cursor has jumped 14 times.
Sometimes it is such as when I am working on emails. Other times it is not as when I am working with my word processor. Also, for your information I am running a Dell laptop INSPIRON 1521 with Windows Vista Home Premium.
-
Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal???
I've had my Macbook for about 11 months now and i use it every day; its gone though about 420 cycles of charging and using the power, and i noticed the battrey preformance has decreased (as expected). The problem isn't sevear yet but it would comfort me knowing that i could replace the battery in the near future
Please contact me or answer the question if you know anything about this!Exitio\'s Apple wrote:
Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal???
No only if they think under warranty/AppleCare, but your likely able to pay for a new battery if they have them, which they might not yet since it's such a new machine still.
BTW, I have a Early 2011 17" MBP, 27 months old, charges to 97% and has only 14 cycles. -
Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?
Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration. -
My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?
My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?
To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID. If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance". -
I have purchased a TV show series. I show that from the purchased screen it has downloaded. However it is not in my library. How do I watch this episode? Several of the episodes are in the library but a few did not make it there. Help please!
Sometimes things have inconsistent labeling. Check your Recently Added playlist.
-
hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???
Have the same problem here... don't know what to do...
-
Has anyone's screen go blank and not boot up after installing the new yosemite OS
has anyone's screen go blank and not boot up after installing the new yosemite OS
Hi Mofimac,
Thanks for visiting Apple Support Communities.
If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
Mac OS X: Gray screen appears during startup
I recommend going through these first three sections first:
Disconnect, test peripheral devices and network cables
Perform a Safe Boot
Reset the NVRAM / PRAM
Best Regards,
Jeremy -
My laptop is running Microsft Vista Home Premium 32 bit and I have downloaded iCloud but whilst the files are in the directory it has not loaded so its not available in the start menu. grateful for any ideas or suggestions?
Have you installed it yet (download is step 1)
-
Hi, I am new to iPhone and downloaded a app from the app store and had my iPhone connected to my computer but I just cant find the app on my phone I'v checked on the desktop and the app store but it is nowhere...can somebody point me in the right direction plzzzzz
If your iPhone is not recognized by iTunes when connected - not available under Devices in the iTunes source list, check this link.
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
For voice memos, I have include voice memos when syncing selected under the Music tab for my iPhone sync preferences with iTunes which transfers voice memos from my iPhone to my iTunes library when syncing. -
My MacBook Pro has been having difficulties at startup. It sometimes locks and doesn't get past the white screen. It has also locked up several times and gotten a green stripes across the entire screen. What is causing this and how do I fix it?
You don't, take it to Apple for repair.
This might interest you if it's too old to fix.
My computer is not working, is my personal data lost? -
Company: V I Engineering, Inc.
Locations: Positions available in our Farmington Hills, MI Office
Salary/Wage: $negotiable
Status: Full Time, Employee
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience preferred, but not required)
Career Level: Intermediate (Non-Manager)
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design and development of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box.
Required
5+ years of Systems Integration experience
Experience in Design and Implementation of Test Systems, including integration
Experience in ATE usage and development
Experience in reviewing of Mechanical Fixtures
Experience in understanding the design of Circuit Boards as they relate to a total system
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
LabVIEW/TestStand experience
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience (statement coverage, code size, reuse measurement, etc)
TortoiseSVN
V I Package Manager (VIPM)
UML
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 25%Re
location assistance is possible.
V I Engineering, Inc. offers incredible opportunities to grow and advance your career, a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.Edit
Jeff
Maybe you are looking for
-
IMac G5 won't boot, external interrupt error
I started my iMac G5 and did get the chime but it automatically goes into OF mode. The fans run loudly and it continously scrolls an "external interrupt" error with a bunch of jargon that goes by so fast I can't read it. I tried resetting SMU, none o
-
External LDAP + Roles in portal
Folks, I use weblogic 8.1 portal. Can we use an external LDAP for storing portal roles? If so, what is supported, recommended, etc. Does BEA have a recommendation/document on how to support an environment with multiple domains that share a common LDA
-
Who succeeded using special keys in KDE?
Hi, I'm using Gnome, but I really love KDE.The reason that I don't use KDE is hotkey/special key issues. I can't get my x61 thinkpad's special keys to work in KDE such as: Fn+F2 Fn+F4 Fn+F6 ...No on-screen notification for volume keys and brightness
-
Java exception in getRSSI() call
I am testing out a little app I wrote to monitor cell data and strength. I am able to use the RadioInfo.getSignalLevel() call, but the GPRSInfo.GPRSCellInfo.getRSSI() call returns a Java exception (don't have it handy, but I can get it if need be)
-
Adobe problem when opening PSD registration
Hello, I have a big problem in my adobe software (Photoshop and Fireworks by-example). When, for example, I backup my project psd, short layers that I did well at the opening of what I save almost all my layers are disorders ... They are displaced, s